# AC 91-44A: Operational and Maintenance Practices for Emergency Locator Transmitters and Receivers - Type: Advisory circular (guidance, not mandatory unless a rule or AD requires it) - Status: Historical - Version in force: [AC 91-44A CHG 1](https://openairdocs.org/ac/91-44), approved February 1, 2018. This is a historical version - Approved: December 12, 1980 - Last reviewed: July 31, 2024 - This change: Office change - Family: AC 91-44 - Cancels: AC 20-81, AC 20-85, AC 20-87, AC 20-91, [AC 91-44](https://openairdocs.org/ac/91-44) - Cancelled by: [AC 91-44A CHG 1](https://openairdocs.org/ac/91-44) - 14 CFR parts: 91, 25 - 14 CFR sections: [91.207](https://www.ecfr.gov/current/title-14/section-91.207), [25.1415](https://www.ecfr.gov/current/title-14/section-25.1415) - Pages: 15 - PDF: https://openairdocs.org/files/sha256/be/6a/be6a18f2c51f9854d16e91d87fa20863c441998e23d1e760d33948ba4e7d6805 - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID197188192220230111225132.0001 - DRS record last changed: November 22, 2025 - Page: https://openairdocs.org/ac/91-44A ## Versions - [AC 91-44A CHG 1](https://openairdocs.org/ac/91-44) (Current), approved Feb 1, 2018, 14 pages. Change 1 of AC 91-44A. - [AC 91-44A](https://openairdocs.org/ac/91-44A) (Historical), approved Dec 12, 1980, 15 pages. Office change ## ADs that cite it (1) - [AD 77-02-08](https://openairdocs.org/ad/77-02-08): Batteries · Narco Emergency Locator Transmitter Batteries. Effective Feb 1, 1977 ## Text Each page's text from the PDF; open the PDF at a page with #page=N. This is OCR from the scanned FAA advisory circular. OCR can misread letters and numbers. ### Page 1 (OCR) AC 91-44A Date 12/12/80 **ADVISORY CIRCULAR** DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Washington, D.C. OPERATIONAL AND MAINTENANCE PRACTICES FOR Subject: EMERGENCY LOCATOR TRANSMITTERS AND RECEIVERS 1. PURPOSE. This advisory circular (AC) combines and updates the material in several AC's on the subject of emergency locator transmitters (ELT) and receivers for airborne service. **2. CANCELLATIONS.** a. AC 20-81, Accidental or Unauthorized Activation of Emergency Locator Transmitters (ELT), dated October 10,1972, is canceled. b. AC 20-85, Emergency Locator Transmitters and Receivers, dated March 16, 1973, is canceled. cAC20-87,Airborne Homing and Alerting Equipment for Use With Emergency Locator Transmitters, dated May 7,1973, is canceled. d. AC 20-91, Lithium Batteries Used in Emergency Locator, Iransmitters, dated April 11,1975, is canceled. e. AC 91-44, Emergency Locator Transmitters Operational and Maintenance Practices, dated February 20,1976, is canceled. 3. RELATED FEDERAL AVIATION REGULATIONS. Sections 91.52,121.339 and 43.13 of the FAR. 4. RELATED READING MATERIAL. Technical Standard Order TSO-C91;Radio Technical Commission for Aeronautics (RICA) Document No. DO-168, Minimum Performance Standards--Emergency Locator Transmitters, and DO-154, Recommended Basic Characteristics for Airborne Homing and Alerting Equipment for use with ELTs. All RTCA documents may be obtained from: RICA Secretariat, Suite 665,1717 H Street NW., Washington, DC 20006. Initiated by: AWS-130 ### Page 2 (OCR) ..... **5. BACKGROUND.** a. On December 29, 1970, Congress amended toe Federal Aviation Act of 1958 to require the installation of an ELT on most civil airplanes of U.S. registry. The Federal Aviation Administration (FAA) implemented the new statute by adopting two new Federal Aviation Regulations (FAR), Sections 91.52 and 37.200 ('1'sO-C91). Section 91.52 prohibits, with certain exceptions, the operation of a U.S. registered civil airplane unless it is equipped with an ELT meeting the performance standards specified in TSO-C91. b. Any accidental or unauthorized activation of an ELT will generate an emergency signal that cannot be distinguished from that of an actual emergency and could lead to expensive and frustrating searches. Moreover, the unwarranted ELT signal could tie up the emergency frequencies such that a genuine emergency signal would not be picked up. If this ELT signal is transmitted on or near an airport, it may, in addition, render some radio communications channels useless. c. The Federal Communications Commission (FCC) regulations specify authorized ELT operations, and it should be noted that portable ELTs approved for aircraft service are not for use when "backpacking," i.e., recreational or wilderness exploration on foot. 6. DEFINITIONS AND GENERAL OPERATIONAL CHARACTERISTICS OF ELTS. Two general types of ELTs are currently in use. Those aircraft operating primarily over land areas will most likely be equipped with an ELT radiating, when activated manually or by impact, a peak effective power of at least 75 milliwatts. This ELT may be attached to the aircraft structure or it may be portable. For operations over water, the ELT is required to be type S which must have 225 milliwatts of power output since its antenna would be only a few inches above the water and may often be below the crest of waves. There is no requirement for an inertial impact switch in these ELTs since they are usually activated manually or by water penetration into the ELT battery. a. _Inertial Activation. To meet the "g" force requirements of TSO-C91, automatic fixed-type inertially activated ELT's (except overwater type) must activate at any inertial force, parallel to the longitudinal axis of the aircraft when installed in accordance with the manufacturer's instructions, of 5(+2, -0)g and greater for a time duration of 11(+5, -0) milliseconds or longer. However, many inadvertent activations have been caused by inertial switches actuating in other directions. Experience has shown that automatic fixed type ELTs should be attached to the airframe or other solid structure free and clear of cables, pulleys, etc. Attachments to thin ### Page 3 (OCR) partitions or to panels, such as the sides of baggage compartments, are susceptible to natural vibrations which may undesirably exceed the inertial force of the impact switch lower limits. Attachment solely by means of Velcro strips and other flexible materials is not considered satisfactory since the "g" switches may fail to operate or the equipment :nay came out of its mounting resulting in damage to the ELT and possibly causing damage to the antenna or antenna coaxial cable. Permanently mounted ELTs should have their antenna cables attached try the airframe in such a manner as to preclude inadvertent damage by passengers or by baggage, and be as far aft as practicable. For portable type ELTs, the manufacturer's installation instructions should be followed since placement and orientation of the EL'f may be critical in order to avoid inadvertent activation. The manufacturer must clearly indicate how the ElT is to be mounted in order to prevent such activations. Except for automatic deployable types, the mounting should be of such design that the ELT cannot be ejected. The manufacturer should also provide cautionary information relative to smaller radiated signal levels when antennas are improperly mounted, especially when inside the aircraft. The antenna should be fully extended and in a vertical position when the airplane is in the normal flight attitude and as close to a window as possible without touching the metal window casing or other metal airplane parts. If the antenna is not enclosed in an insulating sleeve, one may be slipped over the antenna in those areas where the antenna is likely try touch metal if the cockpit area is deformed in a crash. The antenna should be located in the approximate enter of the window so that at least 12 inches of the antenna length is exposed to the window. The window should be at least 12 inches high and 12 inches wide to accomodate the antenna. Radio Technical Commission for Aeronautics (RICA) has published Document No. DO-168, which contains suitable installation precautions to be taken when using alternate means of transmitter activation such as frangible switches and others. b. Activation Due to Radio Frequency (RF) Susceptibility. A cause of inadvertent activation of ELTs has been attributed to poor RF susceptibility characteristics of the ELT; however, this problem may be limited to only certain designs. TSO-C91 does not require tests for RE susceptibility. Accordingly, it would be advisable for ELT manufacturers to test their products to determine that their ELTs when "Armed" cannot be damaged or activated by a test signal of +23dBm (0.2 watts) directly coupled to the antenna terminals, while the frequency of the test signal is swept over a range of 118 megahertz (MHz) to 1,000 MHz several times. A suitable test procedure appears in RICA Document DO-1G8. After installation in an aircraft, the ELT should again be "Armed" and then be tested ### Page 4 (OCR) to determine that it would not be activated by 'the RF generated by the switching transients associated with the aircraft communications transmitter. One method is to transmit on all selectable frequencies over the entire transmitter frequency range to determine that there will be no inadvertent activations by these transmissions. ElTs have also been known to activate as a result of other RF interference inherent to certain aircraft, but again it is primarily the result of the design characteristics of the ELT. For this reason, the ELT should be "Armed" and the remainder of the aircraft electronic equipment operated collectively to determine susceptibility. It is recommended that the ELT antenna be as far aft as practicable, but at least 30 inches from other very high frequency (VHF) antennas since the close proximity of the ELT antenna to the other VHF antennas can disrupt normal communication and navigation capabilities aboard the aircraft. All inadvertent activations pose a serious safety hazard and each such incident should be reported to the FAA for its service difficulty program to provide a factual base for corrective action, Any General Aviation District Office will supply a Malfunction or Defect Report Form to report such incidents. The FAA maintains computer records of inflight and other accidental ELT activations and, if the readout shows a developing trend, action will be taken to reverse this c. Responsibility for Activations. It is important that all aircraft operators and maintenance personnel assume their share of the responsibility for inadvertent activations. The pilot in command of an aircraft equipped with an ELT is responsible for its operation and, prior to engine shutdown at the end of each flight, should tune the VHF receiver to 121.5 MHz and listen for ELT activations. Such activations have been known to occur after hard landings and sometimes as a result of acrobatics in flight. If the ELT has been activated, it should be immediately shut off and the nearest FAA tower or flight service facility should be notified of the action. Maintenance may be required before the ElT is returned to the "Armed" condition. Maintenance personnel are responsible fob accidental activation only during the actual period of their work. 7. MAINTENANCE TESTING OF ELTS. Maintenance of ELTs are subject to Part 43 (Maintenance, Preventive Maintenance, Rebuilding, and Alteration) of the FAR and should be included in the required inspections. Since the ELT is a passive device, the status of which is unknown until called upon to perform, it is essential that at least the impact switch operation and the transmitter output be checked during these inspections. Manufacturers instructions should be followed. Testing of an ELT prior to installation or for reasons due to maintenance should be conducted in a screen room or metal enclosure in order to avoid outside radiation by the transmitter. If ### Page 5 (OCR) conducted outside of a screen room, the transmitter should be connected to a dummy load to limit radiation. This may not always be possible, in which instance it is advisable to conduct the tests only within the first 5 minutes after any hour. The tests should permit only three sweeps of the audio modulation of the transmitter. A VHF receiver tuned to 121.5 MHz should be used to monitor the tests. If the tests are conducted other than during the first 5 minutes of the hour, they should be coordinated with the nearest FAA tower or Flight Service Station. Subsequent to installation and maintenance, a functional test should be performed in concurrence with the method stated above. Ground crews which move aircraft should subsequently monitor 121.5 MHz and immediately shut off any ELT which has been inadverténtly activated. **8. BATTERIES.** a. Battery Replacement. Manufacturers of ElTs are required to mark the expiration date of the battery, based on 50 percent of the useful life (or for rechargeable batteries at 50 percent of their useful life of charge) on the outside of the transmitter. Batteries are required to be changed on that date or when the transmitter has been in use for more than 1 cumulative hour. The date stamped on the replacement battery must also serve as the new expiration date marked on the outside of the ELT. Batteries subjected to long periods of high temperatures, such as ramp areas in the arid Southwest, may require replacement sooner than indicated by the date marked on the battery case. During battery replacement, attention should be directed to conditions which may affect the functional operation of the ELT (i.e., corrosion, moisture) which may prevent the ELT from meeting minimal standards. The replacement can be done by the pilot if the preventive maintenance limitations of Part 43.3 (h) of the FAR, are complied with. For example, a portable type ELT that is readily accessible and can be removed and reinstalled in the aircraft by a simple operation should be considered preventive maintenance. Fixed type ELT installations are often permanently mounted in a remote area of the aircraft near flight control cables, vital aircraft components and critical attachments to the aircraft structure. Installations of this nature require an external antenna and often a remote on/off transmitter control switch that is usually located near the pilot's flight position. This type installation is complex and battery replacement should be accomplished by a certificated mechanic or certificated repair station. Replacement batteries should be approved (normally under ISO-C91) for the specific model of ELT and the installation performed in accordance with Section 43.13 of the FAR. When replacing a lithium battery with another battery type appropriate precautions associated with difference in voltage characteristics may apply. for ### Page 6 (OCR) example, one maufacturer's ELT, if not retuned, may transmit excessively on frequencies not assigned to it and thereby could interfere with the aircraft's voice communications or navigation equipment. Any replacement of the battery requires that an entry be made in the maintenance record. It would be helpful to also enter the battery expiration date since there may be a loss of the date due to corrosion. If maintenance personnel find that the battery date is about to expire during routine maintenance, an annual, or 100-hour inspection, they should notify the owner or operator of this condition. Water activated batteries, which furnish power for stowable or survival type ELTs used on overwater flights, have virtually unlimited shelf life. They are not usually marked with an expiration date. They must be replaced after activation regardless of how long they were in service. Discarded lithium batteries in quantities in excess of approximately 1 kilogram, may leak toxic chemicals into the soil in hazardous amounts. The batteries are also flammable when crushed, and they have been known to cause fires in garbage trucks and at landfill sites. b. Lithium Battery Problems. Lithium sulphur dioxide batteries have been known to vent violently and occasionally explode. This has resulted in an FAA/industry effort during 1979 to develop performance standards for safer batteries. During that time, several successive airworthiness directives required removal of such batteries pending the manufacture of a sufficient supply of batteries meeting the standards of the new Technical Standard Order. Some ElT manufacturers are now using other types of batteries such as magnesium and alkaline. In some instances, the aircraft owner may be unable to obtain a suitable battery, particularly if the ELT manufacturer is no longer in business. This may necessitate the purchase of a new ELTfor which the newer types of batteries are available. The flight crew should be aware that the newer TSO approved batteries (ISO-C97) may emit undesired gases and odors (sulfurous compounds, S02) although the venting is controlled to preclude explosions. At the first indication of battery venting, the cabin area should be ventilated to the maximum extent possible. The S02 gas emitted by any Lithium battery can combine with various polymers or residual soldering resins of the ELTand form a sulfurous compound which is believed to be a relatively clear liquid and is non-corrosive. However, upon combination with humidity in the ambient air, these sulfurous impounds form highly corrosive sulfurous acid (H2s03), which can cause corrosion in the ELT. ELTcorrosion has been confirmed in ELT'stobe the cause of inadvertent activations, battery shorting, and inertia switch malfunctions. S02 corrosion is a recurrent problem, and may surface weeks or even months after battery replacement. owners of lithium powered, or what were lithium powered ELTs,in which the electronic components share the same compartment as the ### Page 7 (OCR) battery are, therefore, advised 1) against lithium battery retrofit unless non-emission of S02 can be guaranteed and 2) against any type of battery replacement until an inspection for corrosion has been conducted. **9. OPERATION OF ELTS DURING MANUFACTURING, DEMONSTRATION, AND TRAINING.** Emergency locator transmitters used in connection with design, manufacture, demonstration, or testing should not be operated on 121.5 or 243 MHz. These units should be used with offset crystals and operated at frequencies of 121.6, 121.65, 121.7, 121.75, 121.8, 121.85, and 121.9 MHz as provided by Part 87 of the Federal Communications Commission (FCC) rules. The FCC rules also require that all ELT users obtain station and operator licenses. (Reference to the FCC should be made to keep updated with any FCC rule changes). Prior to each operational test period, the test transmission on the selected frequency should be coordinated with the appropriate FAA Regional Frequency Management Office, see Appendix 2 of this advisory circular, to avoid interference with normal communications on these frequencies. 10. AIRBORNE HOMING AND ALERTING EQUIPMENT FOR USE WITH ELTS. Three categories of homing and alerting equipment discussed in RPCA Document DO-154, Recommended Basic Characteristics for Airborne Homing and Alerting Equipment for Use With ELTs, are as follows: a. Category A. 'Ibis category is comprised of a homing adaptor for use with an airborne communications receiver to provide steering information for the search aircraft. b. Category B. This category is comprised of a self-contained airborne receiver operating at the fixed emergency frequencies, which provides alerting signals upon detection of an emergency signal. It also provides steering information. c. Category C. This category is identical to Category B except that it also provides signal strength indications for "build and fade" search procedures. 11. SEARCH AND RESCUE RESPONSIBILITY. The primary search and rescue responsibility for downed aircraft lies with the U.S. Coast Guard and the U.S. Air Force through the Civil Air Patrol. The FAA has equipped its aircraft, which flight check its ground facilities, with ELT monitor receivers and alerting indicators. The FAA recommends that the pilots of all aircraft monitor the emergency frequencies with any available additional receiver. There is no additional cockpit workload, and monitoring ### Page 8 (OCR) presides ovie series to the drie atate armandy a well as making certain that the 12. ALERT AND SEARCH PROCEDURES. The following are suggested actions in the event an ELT signal is heard. a. Notification. Notify the nearest FAA ground facility stating your position when the signal was first heard and also your position if and when it was lost. You need do nothing more unless requested by the ground facility and then only at your discretion. If you have actually discovered the site of a crash, you may want to circle it to guide rescue teams or you may wish to extend whatever aid is requested. You also may be requested to activate your transponder for a more accurate location or to gain altitude and transmit to assist other ground facilities to obtain a fix on your position. b. Search Procedures. If your airplane is equipped with a VHF homing system, flying to the source of an ELT signal is simple and the procedures are generally well-known. If not, one of the following methods will assist in locating an ELT. (1) Build and Fade Using Signal Strength Meter. Not so wellknown, but equally effective, are the "build and fade" 'methods of locating the source of an ELT signal. One method requires a radio receiver equipped with a signal strength meter and the courses to be flown are outlined in Appendix 1, Figure 1 of this advisory circular. (i) Once the ELT signal is heard, continue your flight on the same course and note how the signal strength meter readings change. (u) If the signal strength is increasing, continue on course; if dropping, make a 180° turn and fly back along the same track. (iii) At some point along the return track, the signal will maximize and then start to drop. Again, make a 180 turn and return to the point of maximum signal strength at which point the ELT is either 90 degrees to the right or to the left of that position. (iv) Make either a 90° right or left turn and observe the signal strength. If the signal strength diminishes, you have made the wrong choice and must make a 180° turn in order to fly toward the ELT signal source. ### Page 9 (OCR) (v) Passage over the ELTwill be indicated by either a sharp rise immediately followed by a sharp drop or by a complete momentary loss of signal. In some instances, the signal strength may rapidly fluctuate several times before steadying again as the ELTsite is passed. These variations depend on the orientation of the ELTantenna after the crash, and any unusual signal strength gyrations usually indicate passage over the ELT.Toassist in pinpointing the ELTlocation, try switching the homing receiver to an adjacent channel if it appears to be overloading because of high sensitivity. (2) Wing Shadow Method. The wing shadow method is another search method that may be used to locate the general area of an ELTwhich is useful when the antenna is approximately centered on the top of the wing or located directly opposite on the bottom of the fuselage. This method works best if the aircraft has metal wings, and the use of this method is illustrated in Appendix 1, Figure 2. The pilot must be familiar with the location of his antennas, particularly in dual radio installations, if he is to avoid ambiguity, i.e., which antenna is in the signal shadow cast by the metal wings or fuselage. (i) On hearing an ELTsignal, start a 3600 turn to the left at a steep bank angle. At some point in the turn, the receiving antenna will be in the radio shadow of the wings and the ELT signal will be lost. If the receiving antenna is top mounted, the right wing will point in the general direction of the ELTwhen the signal is lost. If the antenna is bottom mounted, the left wing will point in the general direction of the ELTwhen the signal is lost. (ii) By repeating this procedure at locations about 20 miles apart, the general location of the ELT can be determined close enough to justify a concentrated search of the area. (3) Build and Fade Using Squelch. There is another build and fade method using receiver squelch if the receiver is not equipped with a signal strength meter. This method is illustrated in Appendix 1, Figure 3, and is performed as follows: (i) When the ELTsignal is first heard, adjust the receiver volume control for normal listening. Adjust the squelch control to the point where the squelch cuts off the audio and then back the squelch off to where the audio just cuts back in. Note your position over the ground. ### Page 10 (OCR) (ii) Continue on curse. If the signal from the ELT immediately cuts out, you are flying away from the ELT signal source; in which instance make a 180° turn and fly back along the same track, at which time the signal should return. Continue along the reverse track, sometimes as much as 10 miles, until the signal again cuts out and note your position over the ground. (iii) Again make a reverse turn and fly back about half way. At that point, the ELT is approximately 900 right or left of your position. (iv) Make a 900 right or left turn and if the signal again cuts off, you are flying away from the ELT, thereby requiring another 180° turn back toward the transmitter. Again, it may be required that you detune your search receiver if it is sensitive and appears to overload as you approach the ELT. M. C. Beard Director of Airworthiness ### Page 11 (OCR) Signal usually erratic on passage over crash site Crash Site Signal gets weaker - - Signal gets stronger Point of Strongest Signal on Original Track Signal gets weaker ---_ -_____ signal gets stronger Signal gets stronger _ _ **SEARCH AIRPLANE FIGURE 1** **FLIGHT PROCEDURE FOR LOCATING ELT USING A** **SIGNAL STRENGTH METER, BUILD AND FADE METHOD** ### Page 12 (OCR) ELT Signal Heard Here Start Steep Bank Left Turn Wing shadow (top mounted antenna) --- ---- **CRASH SITE FIGURE 2** **WING SHADOW METHOD OF LOCATING AN ELT** ### Page 13 (OCR) Signal Heard Signal Lost Signal Lost CRASH SITE - - Signal Heard Signal Heard Signal Lost Signal Heard (Adjust Squelch) FIGURE 3 **BUILD AND FADE METHOD USING SQUELCH** ### Page 14 (OCR) FAA FREQUENCY MANAGEMENT OFFICES Alaskan Region - Anchorage Frequency Management Office, AAL-430B DOT, Federal Aviation Administration P. 0. Box 14, 701 C Street Anchorage, AK 99513 Tel: (907) 271-5343 Central Region - Kansas City Frequency Management Office, ACE-432 DOT, Federal Aviation Administration 601 East 12th Street, Room 1625 Kansas City, MO 64106 Tel: (816) 374-2643 Eastern Region - New York Frequency Management Office, AEA-426 DOT, Federal Aviation Administration JFK International Airport, Fed. Bidg. Jamaica, NY 11430 Tel: (212) 995-3341 Great Lakes Region - Chicago Frequency Management Office, AGL-437 DOT, Federal Aviation Administration 2300 East Devon Des Plaines, IL 60018 Tel: (312) 694-4500 New England Region - Boston Frequency Management and Leased Communications Staff, ANE-464 DOT, Federal Aviation Administration 12 New England Executive Park Burlington, MA 01803 Tel: (617) 273-7256 Northwest Region - Seattle Frequency Management Office, ANW-426 DOT, Federal Aviation Administration FAA Building, Boeing Field Seattle, WA 98108 Tel: (206) 767-2653 Pacific Region - Honolulu Frequency Management and Leased Communications Staff, APC-430.3 DOT, Federal Aviation Administration P. 0. Box 50109 Honolulu, 111 96850 Tel: (808) 546-8378 Rocky Mountain Region - Denver Frequency Management and Leased Communications Staff, ARM-406 DOT, Federal Aviation Administration 10455 East 25th Avenue Aurora, CO 80010 Tel: (303) 837-3571 Southern Region - Atlanta Frequency Management Office, ASO-434 DOT, Federal Aviation Administration P. 0. Box 20636 Atlanta, GA 30320 Tel: (404) 763-7386 Southwest Region - Fort Worth Frequency Management and Leased Communications Staff, ASW-406 DOT, Federal Aviation Administration P. 0. Box 1689 Fort Worth, TX 76101 Tel: (817) 624-4911, Ext. 374 ### Page 15 (OCR) Western Region - Los Angeles Aeronautical Center - Oklahoma City Frequency Management and Leased Communication Staff, AWE-406 Worldway Postal Center Frequency Management Office, AAC-453 DOT, Federal Aviation Administration Mike Monroney Aeronautical Center P. O. Box 92007 P. O. Box 25082 15000 Aviation Blvd. Oklahoma City, OK 73125 Los Angeles, CA 90009 Tel: (405) 686-2781 Tel: (213) 536-6164 EAA Technical Center - Atlantic City Headquarters - Washington, D.C. Frequency Management Office, ACT-151 DOT, Frequency Engineering Branch, AAF-730 FAA Technical Center DOT, Federal Aviation Administration Building 201 800 Independence Avenue SW. Atlantic City, NJ 08405 Washington, DC 20591 Tel: (609) 641-8200 Tel: (202) 426-3597 --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.