# AD 2004-19-04: Critical Life-Limited Rotating Engine Parts

- Type: Airworthiness directive
- Status: Current
- Products: Rolls-Royce RB211-22B-02, RB211-22B/MOD 72-8700, RB211-524B-02, RB211-524B-B-02, RB211-524B2-19, RB211-524B2-B-19, RB211-524B3-02, RB211-524B4-02, RB211-524B4-D-02, RB211-524C2-19, RB211-524C2-B-19, RB211-524D4-19 and 18 more
- Effective: November 1, 2004
- Published: September 17, 2004, 69 FR 55943–55947
- Issued: September 10, 2004
- Issued as: Final rule
- Superseded by: Nothing supersedes this AD
- Product type: Engine
- Amendment: 39-13798
- Docket: 2003-CE-40-AD
- Registered aircraft: 248 may be affected, by airframe or engine model (OpenAirDocs)
- Official PDF: https://openairdocs.org/files/sha256/37/82/3782de754f3f317177cc3e76610a334004b1b63933d98707645a428fc5f5674d (from https://www.govinfo.gov/content/pkg/FR-2004-09-17/pdf/04-20774.pdf)
- Federal Register: https://www.federalregister.gov/documents/2004/09/17/04-20774/airworthiness-directives-cessna-aircraft-company-120-140-140a-150-f150-170-172-f172-fr172-p172d-175
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/BAD5DA0CA6768D5086256F1700619C57.0001
- DRS record last changed: August 7, 2025
- Page: https://openairdocs.org/ad/2004-19-04

## Summary

The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce plc (RR) RB211-22B, RB211-524, and RB211-535 series turbofan engines. This AD requires revising the Time Limits Manual for RR RB211-22B, RB211-524, and RB211-535 series turbofan engines. These revisions include required enhanced inspection of selected critical life-limited parts at each piece-part exposure. This AD results from the need to require enhanced inspection of selected critical life-limited parts of RB211-22B, RB211-524, and RB211-535 series turbofan engines. We are issuing this AD to prevent failure of critical life-limited rotating engine parts, which could result in an uncontained engine failure and damage to the airplane.

## The airworthiness directive

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

1. The authority citation for part 39 continues to read as follows:

2. The Federal Aviation Administration (FAA) amends § 39.13 by adding the following new airworthiness directive (AD):

2004-19-04 Rolls-Royce plc: Docket No. 2003-NE-57-AD.

### (a) Effective Date

  (a) This AD becomes effective October 27, 2004.

### (b) Affected ADs

  (b) None.

### (c) Applicability

  (c) This AD applies to Rolls-Royce plc (RR) RB211-22B, RB211-524, and RB211-535 series turbofan engines. These engines are installed on, but not limited to, Boeing 747, 757, 767, Lockheed L-1011, and Tupolev Tu204 airplanes.

### (d) Unsafe Condition

  (d) This AD results from the need to require enhanced inspection of selected critical life-limited parts of RB211-22B, RB211-524, and RB211-535 series turbofan engines. The actions specified in this AD are intended to prevent failure of critical life-limited rotating engine parts, which could result in an uncontained engine failure and damage to the airplane.

### (e) Compliance

  (e) You are responsible for having the actions required by this AD performed within the compliance times specified unless the actions have already been done.

  (f) Within the next 40 days after the effective date of this AD, revise the Time Limits Manual (TLM), and for air carrier operations revise the approved continuous airworthiness maintenance program, by adding the following text and the applicable table determined by engine model number:

“GROUP A PARTS MANDATORY INSPECTION

  (1) Inspections referred to as ‘Focus Inspect’ in the applicable Engine Manual inspection Task are mandatory inspections for the components given below, when the conditions that follow are satisfied:

    (i) When the component has been completely disassembled to piece-part level as given in the applicable disassembly procedures contained in the Engine Manual; and

    (ii) The part has more than 100 recorded flight cycles in operation since the last piece-part inspection; or

    (iii) The component removal was for damage or a cause directly related to its removal; or

    (iv) Where serviceable used components, for which the inspection history is not fully known, are to be used again.

  (2) The list of Group A Parts for RB211-22B engines is specified below:


| Part nomenclature (RB211-22B series engines) | Part number | Inspected per overhaul manual task |
| --- | --- | --- |
| Low Pressure Compressor Rotor Disc | All | 72-31-12-200-006 |
| Low Pressure Compressor Rotor Shaft | All | 72-31-20-200-000 |
| Intermediate Pressure Compressor Rotor Shaft Stages 1 to 5 | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Rotor Shaft Stages 6 to 7 | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Rotor Rear Stubshaft | All | 72-33-31-200-000 |
| High Pressure Compressor Rotor Stage 1 to 2 Disc Shaft | All | 72-41-31-200-000 |
| High Pressure Compressor Rotor Stage 3 Disc | All | 72-41-31-200-001 |
| High Pressure Compressor Rear Rotor Shaft Assembly | All | 72-41-31-200-002 |
| Compressor/Turbine Joint Flange Support Disc | All | 72-41-31-200-003 |
| High Pressure Turbine Disc | All | 72-41-51-200-000 |
| Intermediate Pressure Turbine Disc | All | 72-51-31-200-000 |
| Intermediate Pressure Turbine Shaft | All | 72-51-33-200-000 |
| Low Pressure Turbine Stage 1 Disc | All | 72-51-61-200-000 |
| Low Pressure Turbine Stage 2 Disc | All | 72-51-61-200-001 |
| Low Pressure Turbine Stage 3 Disc | All | 72-51-61-200-002 |
| Low Pressure Turbine Shaft | All | 72-51-63-200-000 |

  (3) The list of Group A Parts for RB211-535 series engines is specified below:


| Part nomenclature (RB211-535 series engines) | Part number | Inspected per overhaul manual task |
| --- | --- | --- |
| Low Pressure Compressor Rotor Disc | All | 72-31-12-200-000 |
| Low Pressure Compressor Rotor Shaft | All | 72-31-20-200-000 |
| Intermediate Pressure Compressor Rotor Shaft | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Rotor Rear Stubshaft | All | 72-33-21-200-000 |
| High Pressure Compressor Rotor Stage 1 & 2 Disc | All | 72-41-31-200-000 |
| High Pressure Compressor Rotor Stage 3 Disc | All | 72-41-31-200-001 |
| High Pressure Compressor Rear Rotor Shaft Assembly | All | 72-41-31-200-002 |
| Compressor/Turbine Joint Flange Support Disc (applicable to -535C only) | All | 72-41-31-200-003 |
| High Pressure Turbine Disc | All | 72-41-51-200-000 |
| Intermediate Pressure Turbine Rotor Disc | All | 72-51-31-200-000 |
| Intermediate Pressure Turbine Shaft | All | 72-51-33-200-000 |
| Low Pressure Turbine Stage 1 Disc | All | 72-51-61-200-000 |
| Low Pressure Turbine Stage 2 Disc | All | 72-51-61-200-001 |
| Low Pressure Turbine Stage 3 Disc | All | 72-51-61-200-002 |
| Low Pressure Turbine Shaft | All | 72-51-63-200-000 |

  (4) The list of Group A Parts for RB211-524B, -524B3, and -524B4 series engines is specified below:


| Part nomenclature (RB211-524B, -524B3, and -524B4 series engines) | Part number | Inspected per overhaul manual task |
| --- | --- | --- |
| Low Pressure Compressor Rotor Disc | All | 1 72-31-12-200-05 2 72-31-12-200-013 |
| Low Pressure Compressor Rotor Shaft | All | 72-31-20-200-000 |
| Intermediate Pressure Compressor Stage 1 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 2 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 3 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 4 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 5 Disc | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Rotor Shaft Stages 6 to 7 | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Front Stubshaft Drive Cone | All | 72-32-31-200-008 |
| Intermediate Pressure Compressor Rotor Rear Stubshaft | All | 72-33-21-200-010 |
| High Pressure Compressor Rotor Stage 1 to 2 Disc | All | 72-41-31-200-000 |
| High Pressure Compressor Rotor Stage 3 Disc | All | 72-41-31-200-001 |
| High Pressure Compressor Rear Rotor Shaft Assembly | All | 72-41-31-200-002 |
| High Pressure Compressor/Turbine Joint Flange Support Disc | All | 72-41-31-200-006 |
| High Pressure Turbine Bearing Inner Race Support Panel | All | 72-41-51-200-005 |
| High Pressure Turbine Disc | All | 72-41-51-200-019 |
| High Pressure Turbine Conical Shaft | All | 72-41-51-200-021 |
| Intermediate Pressure Turbine Disc | All | 72-51-31-200-003 |
| Intermediate Pressure Turbine Shaft | All | 72-51-33-200-005 |
| Low Pressure Turbine Stage 1 Disc | All | 1 72-51-61-200-000 2 72-51-61-200-007 |
| Low Pressure Turbine Stage 2 Disc | All | 1 72-51-61-200-001 2 72-51-61-200-008 |
| Low Pressure Turbine Stage 3 Disc | All | 1 72-51-61-200-002 2 72-51-61-200-009 |
| Low Pressure Turbine Shaft | All | 1 72-51-63-200-000 2 72-51-63-200-003 |

  (5) The list of Group A Parts for RB211-524B2, -524C2, and -524D4 series engines is specified below:


| Part nomenclature (RB211-524B2, -524C2, and -524D4 series engines) | Part number | Inspected per overhaul manual task |
| --- | --- | --- |
| Low Pressure Compressor Rotor Disc | All | 72-31-12-200-013 |
| Low Pressure Compressor Rotor Shaft | All | 72-31-20-200-000 |
| Intermediate Pressure Compressor Stage 1 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 2 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 3 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 4 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 5 Disc | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Rotor Shaft Stages 6 to 7 | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Front Stubshaft Drive Cone | All | 72-32-31-200-008 |
| Intermediate Pressure Compressor Rotor Rear Stubshaft | All | 72-33-21-200-010 |
| High Pressure Compressor Rotor Stage 1 to 2 Disc | All | 72-41-31-200-000 |
| High Pressure Compressor Rotor Stage 3 Disc | All | 72-41-31-200-001 |
| High Pressure Compressor Rear Rotor Shaft Assembly | All | 72-41-31-200-002 |
| High Pressure Compressor/Turbine Joint Flange Support Disc | All | 72-41-31-200-006 |
| High Pressure Turbine Bearing Inner Race Support Panel | All | 72-41-51-200-005 |
| High Pressure Turbine Disc | All | 72-41-51-200-019 |
| High Pressure Turbine Conical Shaft | All | 72-41-51-200-021 |
| Intermediate Pressure Turbine Rotor Disc | All | 72-51-31-200-003 |
| Intermediate Pressure Turbine Shaft | All | 72-51-33-200-005 |
| Low Pressure Turbine Stage 1 Disc | All | 72-51-61-200-007 |
| Low Pressure Turbine Stage 2 Disc | All | 72-51-61-200-008 |
| Low Pressure Turbine Stage 3 Disc | All | 72-51-61-200-009 |
| Low Pressure Turbine Shaft | All | 72-51-63-200-003 |

  (6) The list of Group A Parts for RB211-524G and -524H series engines is specified below:


| Part nomenclature (RB211-524G and -524H series engines) | Part number | Inspected per overhaul manual task |
| --- | --- | --- |
| Low Pressure Compressor Rotor Disc | All | 72-31-12-200-000 |
| Low Pressure Compressor Rotor Shaft | All | 72-31-20-200-000 |
| Intermediate Pressure Compressor Stage 1 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 2 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 3 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 4 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Stage 5 Disc | All | 72-32-31-200-000 |
| Intermediate Pressure Compressor Rotor Shaft Stages 6 to 7 | All | 72-32-31-200-001 |
| Intermediate Pressure Compressor Front Stubshaft Drive Cone | All | 72-32-31-200-008 |
| Intermediate Pressure Compressor Rotor Rear Stubshaft | All | 72-33-21-200-010 |
| High Pressure Compressor Rotor Stage 1 to 2 Disc | All | 1 72-41-31-200-000 |
| High Pressure Compressor Rotor Stage 3 Disc | All | 1 72-41-31-200-001 |
| High Pressure Compressor Rear Rotor Shaft Assembly | All | 1 72-41-31-200-002 |
| Compressor/Turbine Joint Flange Support Disc | All | 1 72-41-31-200-003 |
| High Pressure Compressor Rotor Shaft Assembly | All | 2 72-41-31-200-014 |
| High Pressure Turbine Disc | All | 1 72-41-51-200-010 2 72-41-51-200-024 |
| Intermediate Pressure Turbine Disc | All | 72-51-31-200-003 |
| Intermediate Pressure Turbine Shaft | All | 72-51-33-200-005 |
| Low Pressure Turbine Stage 1 Disc | All | 72-51-61-200-007 |
| Low Pressure Turbine Stage 2 Disc | All | 72-51-61-200-008 |
| Low Pressure Turbine Stage 3 Disc | All | 72-51-61-200-009 |
| Low Pressure Turbine Shaft | All | 72-51-63-200-003” |

### (g) Alternative Methods of Compliance

  (g) You must perform these mandatory inspections using the TLM and the applicable Engine Manual unless you receive approval to use an alternative method of compliance under paragraph (h) of this AD. Section 43.16 of the Federal Aviation Regulations (14 CFR 43.16) may not be used to approve alternative methods of compliance or adjustments to the times in which these inspections must be performed.

  (h) The Manager, Engine Certification Office, has the authority to approve alternative methods of compliance for this AD if requested using the procedures found in 14 CFR 39.19.

### (i) Maintaining Records of the Mandatory Inspections

    (i) You have met the requirements of this AD by using a TLM changed as specified in paragraph (f) of this AD, and, for air carriers operating under part 121 of the Federal Aviation Regulations (14 CFR part 121), by modifying your continuous airworthiness maintenance plan to reflect those changes. You must maintain records of the mandatory inspections that result from those changes to the TLM according to the regulations governing your operation. You do not need to record each piece-part inspection as compliance to this AD. For air carriers operating under part 121, you may use either the system established to comply with section 121.369 or use an alternative system that your principal inspector has accepted if that alternative system:

  (1) Includes a method for preserving and retrieving the records of the inspections resulting from this AD; and

  (2) Meets the requirements of § 121.369(c); and

  (3) Maintains the records either indefinitely or until the work is repeated.

  (j) These record keeping requirements apply only to the records used to document the mandatory inspections required as a result of revising the Time Limits Manual as specified in paragraph (f) of this AD, and do not alter or amend the record keeping requirements for any other AD or regulatory requirement.

### (k) Material Incorporated by Reference

  (k) None.

### (l) Related Information

    (l) Civil Aviation Authority (CAA) airworthiness directives No. G-2003-0006, dated September 18, 2003, No. G-2003-0009, dated September 19, 2003, and No. G-2003-0007, dated September 18, 2003 also address the subject of this AD.

## Rule preamble

### Dates

This AD becomes effective October 27, 2004.

### Addresses

You can get the service information identified in this AD from Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom; telephone: 011-44-1332-242424; fax: 011-44-1332-249936.

You may examine the AD docket at the FAA, New England Region, Office of the Regional Counsel, 12 New England Executive Park, Burlington, MA.

### For further information contact

Christopher Spinney, Aerospace Engineer, Engine Certification Office, FAA, Engine and Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803-5299; telephone (781) 238-7175, fax (781) 238-7199.

### SUPPLEMENTARY INFORMATION

The FAA proposed to amend 14 CFR part 39 with a proposed airworthiness directive (AD). The proposed AD applies to Rolls-Royce plc RB211-22B, RB211-524, and RB211-535 series turbofan engines. We published the proposed AD in the Federal Register on March 12, 2004 (69 FR 11821). That action proposed to require revisions to the Time Limits Manual for RR RB211-22B, RB211-524, and RB211-535 series turbofan engines to include required enhanced inspection of selected critical parts at each piece-part exposure.

### Examining the AD Docket

You may examine the AD Docket (including any comments and service information), by appointment, between 8 a.m. and 4:30 p.m., Monday through Friday, except Federal holidays. See ADDRESSES for the location.

### Comments

We provided the public the opportunity to participate in the development of this AD. We received no comments on the proposal or on the determination of the cost to the public.

### Conclusion

We have carefully reviewed the available data and determined that air safety and the public interest require adopting the AD as proposed.

### Costs of Compliance

There are about 882 RB211-22B and RB211-524 series engines and about 1,160 RB211-535 series engines of the affected design in the worldwide fleet. We estimate that 30 RB211-22B and RB211-524 series engines and 620 RB211-535 series engines installed on airplanes of U.S. registry will be affected by this AD. We also estimate that it will take about 75 work hours per engine to perform the inspections, and that the average labor rate is $65 per work hour. Since this is an added inspection requirement, included as part of the normal maintenance cycle, no additional part costs are involved. Based on these figures, the total cost impact of this AD on U.S. operators is estimated to be $3,169,000.

### Regulatory Findings

We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

  (1) Is not a “significant regulatory action” under Executive Order 12866;

  (2) Is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and

  (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

We prepared a summary of the costs to comply with this AD and placed it in the AD Docket. You may get a copy of this summary by sending a request to us at the address listed under ADDRESSES. Include “AD Docket No. 2003-NE-57-AD” in your request.

## Affected data sheets (2) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS E12EU](https://openairdocs.org/tcds/E12EU): Rolls-Royce Deutschland Ltd & Co KG; names 21 of 22 models: RB211-524B3-02, RB211-524C2-B-19, RB211-524B2-19, RB211-524B-02, RB211-524B-B-02, RB211-524D4-19, RB211-524D4X-19, RB211-535C-37…
- [TCDS E30NE](https://openairdocs.org/tcds/E30NE): Rolls-Royce Deutschland Ltd & Co KG; names 8 of 8 models: RB211-524H-T-36, RB211-524H-36, RB211-524G2-19, RB211-524G2-T-19, RB211-524H2-T-19, RB211-524G3-19, RB211-524G3-T-19, RB211-524H2-19

## Registered aircraft it may apply to (OpenAirDocs)

Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment.

- Aircraft: 248 (0 by airframe model, 248 by engine model)
- Makers: Boeing 245, Lockheed 2, Airbus 1

Models with the most aircraft:

- [Rolls-Royce RB-211 series](https://openairdocs.org/engine/rolls-royce-rb-211-series): 182 aircraft (engine model)
- [Rolls-Royce RB211-535E4 series](https://openairdocs.org/engine/rolls-royce-rb211-535e4-series): 42 aircraft (engine model)
- [Rolls-Royce RB-211-22 series](https://openairdocs.org/engine/rolls-royce-rb-211-22-series): 8 aircraft (engine model)
- [Rolls-Royce RB211-535E437](https://openairdocs.org/engine/rolls-royce-rb211-535e437): 6 aircraft (engine model)
- [Rolls-Royce RB211535E4B37](https://openairdocs.org/engine/rolls-royce-rb211535e4b37): 4 aircraft (engine model)
- [Rolls-Royce RB211-524H-36](https://openairdocs.org/engine/rolls-royce-rb211-524h-36): 2 aircraft (engine model)
- [Rolls-Royce RB211-524HT36](https://openairdocs.org/engine/rolls-royce-rb211-524ht36): 2 aircraft (engine model)
- [Rolls-Royce RB211-22B-02](https://openairdocs.org/engine/rolls-royce-rb211-22b-02): 1 aircraft (engine model)
- [Rolls-Royce RB211-524B4 series](https://openairdocs.org/engine/rolls-royce-rb211-524b4-series): 1 aircraft (engine model)

All 9 models: https://openairdocs.org/ad/2004-19-04/models.md
Every aircraft: https://openairdocs.org/ad/2004-19-04/aircraft.md

## Related documents

- [AD 2024-10-06](https://openairdocs.org/ad/2024-10-06): Engine (Turbine/Turboprop) · Rolls-Royce Deutschland RB211-535E4-37, RB211-535E4-B-37 and RB211-535E4-C-37. Effective Jun 27, 2024. Affects this AD

No proposed rule in this release led to it. Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.