# AD 2008-04-06: Left side and right side flight deck - Type: Airworthiness directive - Status: Current - Products: Boeing 707-100 Long Body, 707-100B Long Body, 707-100B Short Body, 707-200, 707-300 Series, 707-300B Series, 707-300C Series, 707-400 Series, 720 Series and 720B Series - Effective: March 28, 2008 - Published: February 22, 2008, 73 FR 9670–9672 - Issued: February 11, 2008 - Issued as: Final rule - Superseded by: Nothing supersedes this AD - Product type: Aircraft, Large airplane - Amendment: 39-15378 - Docket: FAA-2007-0264 (https://www.regulations.gov/docket/FAA-2007-0264) - Project: 2007-NM-212-AD - Registered aircraft: 6 may be affected, by airframe or engine model (OpenAirDocs) - Official PDF: https://openairdocs.org/files/sha256/26/b3/26b399701feea5788fc525bee52b2ca258b7c1dce7395198fc60fc7a3abd6ca8 (from https://www.govinfo.gov/content/pkg/FR-2008-02-22/pdf/E8-2994.pdf) - Federal Register: https://www.federalregister.gov/documents/2008/02/22/E8-2994/airworthiness-directives-boeing-model-707-airplanes-and-model-720-and-720b-series-airplanes - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/49FBD7A8293218FA862573F70050F6F8.0001 - DRS record last changed: May 30, 2024 - Page: https://openairdocs.org/ad/2008-04-06 ## Summary We are adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This AD requires repetitive inspections for any cracking of or damage to the left side and right side flight deck No. 2, No. 4, and No. 5 windows, as necessary, and corrective actions if necessary. This AD results from reports of in-flight departure and separation of the flight deck windows. We are issuing this AD to detect and correct cracking in the vinyl interlayer or damage to the structural inner glass panes of the flight deck No. 2, No. 4, and No. 5 windows, which could result in loss of a window and rapid loss of cabin pressure. Loss of cabin pressure could cause crew communication difficulties or crew incapacitation. ## The airworthiness directive ### Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: 1. The authority citation for part 39 continues to read as follows: 2. The FAA amends § 39.13 by adding the following new AD: 2008-04-06 Boeing: Amendment 39-15378. Docket No. FAA-2007-0264; Directorate Identifier 2007-NM-212-AD. ### (a) Effective Date (a) This airworthiness directive (AD) is effective March 28, 2008. ### (b) Affected ADs (b) None. ### (c) Applicability (c) This AD applies to all Boeing Model 707-100 long body, -200, -100B long body, and -100B short body series airplanes; Model 707-300, -300B, -300C, and -400 series airplanes; and Model 720 and 720B series airplanes, certificated in any category. ### (d) Unsafe Condition (d) This AD results from reports of in-flight departure and separation of the flight deck windows. We are issuing this AD to detect and correct cracking in the vinyl interlayer or damage to the structural inner glass panes of the flight deck No. 2, No. 4, and No. 5 windows, which could result in loss of a window and rapid loss of cabin pressure. Loss of cabin pressure could cause crew communication difficulties or crew incapacitation. ### (e) Compliance (e) You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done. ### (f) Repetitive Inspections and Replacement (f) At the applicable times specified in Tables 1, 2, and 3 of paragraph 1.E. of Boeing 707 Alert Service Bulletin A3526, dated June 4, 2007, except as provided by paragraph (g) of this AD: Do the internal and external detailed inspections for any cracking of or damage to the left side and right side flight deck No. 2, No. 4, and No. 5 windows, as applicable, and do the applicable corrective actions before further flight, by accomplishing all of the applicable actions specified in the Accomplishment Instructions of Boeing 707 Alert Service Bulletin A3526, dated June 4, 2007. Repeat the inspections thereafter at the applicable interval specified in paragraph 1.E. of Boeing 707 Alert Service Bulletin A3526, dated June 4, 2007. ### (g) Exception to Compliance Times (g) Where Tables 1, 2, and 3 of paragraph 1.E. of Boeing 707 Alert Service Bulletin A3526, dated June 4, 2007, specify counting the compliance time from “* * * the date on this service bulletin,” this AD requires counting the compliance time from the effective date of this AD. ### (h) Alternative Methods of Compliance (AMOCs) (h)(1) The Manager, Seattle Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19. (2) To request a different method of compliance or a different compliance time for this AD, follow the procedures in 14 CFR 39.19. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO. (3) An AMOC that provides an acceptable level of safety may be used for any repair required by this AD, if it is approved by an Authorized Representative for the Boeing Commercial Airplanes Delegation Option Authorization Organization who has been authorized by the Manager, Seattle ACO, to make those findings. For a repair method to be approved, the repair must meet the certification basis of the airplane, and the approval must specifically refer to this AD. ### (i) Material Incorporated by Reference (i) You must use Boeing 707 Alert Service Bulletin A3526, dated June 4, 2007, to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207. (3) You may review copies of the service information incorporated by reference at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. ## Rule preamble ### Dates This AD is effective March 28, 2008. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 28, 2008. ### Addresses Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207. ### For further information contact Berhane Alazar, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 917-6577; fax (425) 917-6590. ### Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an airworthiness directive (AD) that would apply to all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. That NPRM was published in the Federal Register on December 3, 2007 (72 FR 67866). That NPRM proposed to require repetitive inspections for any cracking of or damage to the left side and right side flight deck No. 2, No. 4, and No. 5 windows, as necessary, and corrective actions if necessary. ### Comments We gave the public the opportunity to participate in developing this AD. We considered the single comment received. Boeing supports the NPRM. ### Conclusion We reviewed the relevant data, considered the comment received, and determined that air safety and the public interest require adopting the AD as proposed. ### Costs of Compliance There are about 238 airplanes of the affected design in the worldwide fleet. This AD affects about 83 airplanes of U.S. registry. The required actions take about 2 work hours per airplane, at an average labor rate of $80 per work hour. Based on these figures, the estimated cost of the AD for U.S. operators is $13,280, or $160 per airplane, per inspection cycle. ### Authority for This Rulemaking Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority. We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. ### Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a “significant regulatory action” under Executive Order 12866, (2) Is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. You can find our regulatory evaluation and the estimated costs of compliance in the AD Docket. ## Affected data sheets (3) (OpenAirDocs) The type certificate data sheets whose models the AD names. - [TCDS 4A21](https://openairdocs.org/tcds/4A21): The Boeing Company; names 4 of 4 models: 707-100B Short Body, 707-200, 707-100 Long Body, 707-100B Long Body - [TCDS 4A26](https://openairdocs.org/tcds/4A26): The Boeing Company; names 4 of 4 models: 707-300B Series, 707-400 Series, 707-300 Series, 707-300C Series - [TCDS 4A28](https://openairdocs.org/tcds/4A28): The Boeing Company; names 2 of 2 models: 720B Series, 720 Series ## Registered aircraft it may apply to (OpenAirDocs) Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment. - Aircraft: 6 (6 by airframe model, 0 by engine model) - Makers: Boeing 6 Models with the most aircraft: - [Boeing 707-338C](https://openairdocs.org/model/boeing-707-338c): 2 aircraft (airframe model) - [Boeing 707-368C](https://openairdocs.org/model/boeing-707-368c): 1 aircraft (airframe model) - [Boeing 707-321B](https://openairdocs.org/model/boeing-707-321b): 1 aircraft (airframe model) - [Boeing 707-323B](https://openairdocs.org/model/boeing-707-323b): 1 aircraft (airframe model) - [Boeing 707-351B](https://openairdocs.org/model/boeing-707-351b): 1 aircraft (airframe model) All 5 models: https://openairdocs.org/ad/2008-04-06/models.md Every aircraft: https://openairdocs.org/ad/2008-04-06/aircraft.md ## Related documents - [Proposed rule FAA-2007-0264](https://openairdocs.org/proposed/FAA-2007-0264): Notice of proposed rulemaking (NPRM), published Dec 3, 2007 Its text cites no advisory circulars or STCs. --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.