# AD 47-42-09: Aileron Hinge Plates

- Type: Airworthiness directive
- Status: Current
- Products: Boeing DC-6, DC-6A and DC-6B
- Superseded by: Nothing supersedes this AD
- Product type: Aircraft, Large airplane
- Registered aircraft: 17 may be affected, by airframe or engine model (OpenAirDocs)
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/65BD33A401B28175862569BB0075D247.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/47-42-09

## The airworthiness directive

47-42-09 DOUGLAS: (Was Mandatory Note 6 of AD-781-1.) Applies to DC-6 Serial Numbers 42854, 42855, 42858 Through 42865, 42869 Through 42880, 42882 Through 42891, 43000 Through 43009, 43055 and 43056.

To be accomplished not later than next No. 3 inspection (or not later than next 150 hours for noncarrier operations).

Certain cases have been found where the aileron hinge plates at wing Stations 421, 485, 585, and 675 were fabricated from overgage stock resulting in an interference fit between the plate and the clevis fitting. The following hinge plates and fittings should be inspected to determine whether or not they conform with the tolerances listed below. If plates are found which exceed the widths noted below, they should be reworked with emery cloth to specified limits and touched up with zinc chromate primer. Fittings which have been installed over an oversize plate should be anodized and carefully inspected before being reinstalled.

Hinge

Station No. Plate Thickness Fitting Width 421 1 3320118 0.249 4334619 0.249

0.237

0.254 485 2 3323460 0.238* 4345756 0.334

0.243

0.350 585 3 3323461 0.311 4345755 0.311

0.297

0.316 575 4 3323462 0.249 4345754 0.249

0.237

0.254

*Thickness of 0.093 angle not included. Total thickness should not exceed 0.334.

(Douglas Service Letter A-214-529.004/RLT dated July 21, 1947, and attached sketches cover this same subject.)

## Affected data sheets (3) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS 6A3](https://openairdocs.org/tcds/6A3): The Boeing Company; names 1 of 3 models: DC-6A
- [TCDS 6A4](https://openairdocs.org/tcds/6A4): The Boeing Company; names 1 of 2 models: DC-6B
- [TCDS A-781](https://openairdocs.org/tcds/A-781): The Boeing Company; names 1 of 1 models: DC-6

## Registered aircraft it may apply to (OpenAirDocs)

Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment.

- Aircraft: 17 (17 by airframe model, 0 by engine model)
- Makers: Douglas 17

Models with the most aircraft:

- [Douglas DC-6B](https://openairdocs.org/model/douglas-dc-6b): 9 aircraft (airframe model)
- [Douglas DC-6A](https://openairdocs.org/model/douglas-dc-6a): 7 aircraft (airframe model)
- [Douglas DC-6](https://openairdocs.org/model/douglas-dc-6): 1 aircraft (airframe model)

All 3 models: https://openairdocs.org/ad/47-42-09/models.md
Every aircraft: https://openairdocs.org/ad/47-42-09/aircraft.md

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.