# AD 60-03-03: Elevator Rivets

- Type: Airworthiness directive
- Status: Current
- Products: Maryland Air Industries F-27, F-27A and F-27B
- Superseded by: Nothing supersedes this AD
- Product type: Aircraft, Large airplane
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/25F5EF1E0343EFAA86256984007240F5.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/60-03-03

## The airworthiness directive

60-03-03 FAIRCHILD: Amdt. 94 Part 507 Federal Register January 29, 1960. Applies to Models F-27, F-27A, and F-27B, Serial Numbers 1 to 64 inclusive.

Compliance required by February 15, 1960.

As a result of investigation of loose rivets in the rudder and elevator tension regulator assembly, P/N 0501101-0 or 0501101-1, the following must be accomplished:

Replace "cherry" rivets attaching the elevator bellcrank to tension regulator assembly with bolts, P/N 27-720003-9.

Assemblies already modified by replacing the "Cherry" rivets with AN 470DD rivets are acceptable. However, further use of AN 470DD rivets in this assembly is prohibited due to the difficulty of installing these rivets without seriously damaging the bellcrank. If AN 470DD rivets are replaced or removed, they shall be replaced with bolts, P/N 27-720003-9. (Fairchild Service Bulletin No. 27-16, revised September 8, 1959, covers this subject.)

## Affected data sheets (1) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS 7A1](https://openairdocs.org/tcds/7A1): Maryland Air Industries Inc.; names 3 of 12 models: F-27, F-27A, F-27B

## Registered aircraft it may apply to (OpenAirDocs)

No registered aircraft matched the models it names.

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
