# AD 62-23-01: Safety Belts

- Type: Airworthiness directive
- Status: Current
- Products: Auto Crat Manufacturing Safety Belts
- Effective: November 19, 1962
- Superseded by: Nothing supersedes this AD
- Product type: Appliance
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/3054788C2A0CD83386256A320049C149.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/62-23-01

## The airworthiness directive

62-23-01 AUTO CRAT MANUFACTURING COMPANY SAFETY BELT: Amdt. 409 Part 507 Federal Register October 26, 1962. Applies to All Aircraft Equipped With Auto Crat Models BN 1-2001, BN 3-1501, BN 3-6001, or BN 3-7001 Series Safety Belts.

Compliance required within the next 25 hours' time in service after the effective date of this AD.

It has been determined that Auto Crat Models BN 1-2001, BN 3-1501, BN 3-6001, or BN 3-7001 Series safety belts, not intended for aircraft use and which do not fully comply with the requirements of Technical Standard Order C22, have been improperly marked with TSO-C22 identification. Accordingly, Auto Crat belt assemblies identified with these model numbers shall be replaced with belt assemblies that conform to TSO-C22 standards.

This directive effective November 19, 1962.

## Registered aircraft it may apply to (OpenAirDocs)

No registered aircraft matched the models it names.

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.