# AD 73-19-04: Main Rotor Blade Grip

- Type: Airworthiness directive
- Status: Current
- Products: Scotts-Bell 47 47, 47B, 47B3, 47D, 47D1, 47E, 47G, 47G-2, 47G-2A, 47G-2A-1, 47G-3, 47G-3B and 12 more
- Effective: October 10, 1973
- Superseded by: Nothing supersedes this AD
- Product type: Aircraft, Rotorcraft
- Amendment: 39-1711
- Registered aircraft: 490 may be affected, by airframe or engine model (OpenAirDocs)
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/06B0363420ACD8E186256A3400537FAB.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/73-19-04

## The airworthiness directive

73-19-04 BELL: Amdt. 39-1711. Applies to Model 47 series helicopters certificated in all categories that are equipped with main rotor blade grips, P/N 47-120-135-1, -2, -3 or P/N 47- 120-252-1, -3.

Compliance required within the next 100 hours' time in service after the effective date of this A.D., unless already accomplished.

To prevent possible fatigue cracks from developing, accomplish the following for each main rotor blade grip:

  (a) Inspect the grip thread relief fillet. The inboard radius and bottom of the fillet must have a smooth finish and be free of nicks or sharp tool marks (Ref. Figure 1-22 of Bell 47D- 1, 47G and 47G-2 Maintenance and Overhaul Instructions).

  (b) Inspect the root radius of the 4 1/2 inch diameter threads for sharp notches. The root radius must be smooth and free of sharp notches or grooves.

  (c) If the grip thread relief fillet is not as specified in subparagraph (a) or has nicks or sharp tool marks, or if the thread root radius has a sharp notch or groove, replace the affected grip prior to next flight, except the helicopter may be flown in accordance with FAR 21.197 to a base where the grip may be replaced.

This amendment becomes effective October 10, 1973.

## Affected data sheets (3) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS 2H3](https://openairdocs.org/tcds/2H3): Scott's-Bell 47 Inc; names 11 of 11 models: 47G-2A, 47G-3B, 47G-3, 47G-4A, 47G-5A, 47G-5, 47G-3B-2A, 47G-3B-2…
- [TCDS H-1](https://openairdocs.org/tcds/H-1): Scott's-Bell 47 Inc; names 9 of 9 models: 47H-1, 47B, 47B3, 47D1, 47D, 47G-2, 47G, 47…
- [TCDS 2H1](https://openairdocs.org/tcds/2H1): Scott's-Bell 47 Inc; names 4 of 4 models: 47K, 47J-2, 47J-2A, 47J

## Registered aircraft it may apply to (OpenAirDocs)

Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment.

- Aircraft: 490 (490 by airframe model, 0 by engine model)
- Makers: Bell 476, Bell-K-Copter 3, Bell Kitz Kopters 1, Bell-Allied Helicopter 1, Bell-Carson 1, Bell-Huddleston And Wilson 1, Bell-Intermountain 1, Bell-Olympic Helicopters 1, Bell-Shippey 1, Bell-Tellijohn 1

Models with the most aircraft:

- [Bell 47G-2](https://openairdocs.org/model/bell-47g-2): 87 aircraft (airframe model)
- [Bell 47G-3B-1](https://openairdocs.org/model/bell-47g-3b-1): 86 aircraft (airframe model)
- [Bell 47G](https://openairdocs.org/model/bell-47g): 55 aircraft (airframe model)
- [Bell 47D1](https://openairdocs.org/model/bell-47d1): 47 aircraft (airframe model)
- [Bell 47G-5](https://openairdocs.org/model/bell-47g-5): 40 aircraft (airframe model)
- [Bell 47G-3B-2](https://openairdocs.org/model/bell-47g-3b-2): 26 aircraft (airframe model)
- [Bell 47G-4A](https://openairdocs.org/model/bell-47g-4a): 20 aircraft (airframe model)
- [Bell 47G-2A](https://openairdocs.org/model/bell-47g-2a): 19 aircraft (airframe model)
- [Bell 47G-5A](https://openairdocs.org/model/bell-47g-5a): 19 aircraft (airframe model)
- [Bell 47G-3B](https://openairdocs.org/model/bell-47g-3b): 15 aircraft (airframe model)
- [Bell 47G-2A-1](https://openairdocs.org/model/bell-47g-2a-1): 13 aircraft (airframe model)
- [Bell 47G-4](https://openairdocs.org/model/bell-47g-4): 13 aircraft (airframe model)
- [Bell 47G3B2A](https://openairdocs.org/model/bell-47g3b2a): 7 aircraft (airframe model)
- [Bell 47H-1](https://openairdocs.org/model/bell-47h-1): 6 aircraft (airframe model)
- [Bell 47J](https://openairdocs.org/model/bell-47j): 6 aircraft (airframe model)
- [Bell 47J-2](https://openairdocs.org/model/bell-47j-2): 6 aircraft (airframe model)
- [Bell 47J-2A](https://openairdocs.org/model/bell-47j-2a): 5 aircraft (airframe model)
- [Bell 47D](https://openairdocs.org/model/bell-47d): 4 aircraft (airframe model)
- [Bell-K-Copter 47G](https://openairdocs.org/model/bell-k-copter-47g): 2 aircraft (airframe model)
- [Bell 47B](https://openairdocs.org/model/bell-47b): 1 aircraft (airframe model)

All 35 models: https://openairdocs.org/ad/73-19-04/models.md
Every aircraft: https://openairdocs.org/ad/73-19-04/aircraft.md

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
