# AD 75-18-07: Rotor Blade Pillow Block Assemblies

- Type: Airworthiness directive
- Status: Current
- Products: Bell Helicopter Textron Canada 206A, 206A-1 (OH-58A), 206B and 206B-1
- Effective: September 19, 1975
- Superseded by: Nothing supersedes this AD
- Product type: Aircraft, Rotorcraft
- Amendment: 39-2346
- Registered aircraft: 861 may be affected, by airframe or engine model (OpenAirDocs)
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/10508E5C04E7E56C86256A3400542E03.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/75-18-07

## The airworthiness directive

75-18-07 BELL: Amendment 39-2346. Applies to Bell Models 206A, 206B, 206A-1, and 206B-1 helicopters certificated in all categories.

Compliance required within 600 hours' time in service after the effective date of this AD, unless already accomplished.

To prevent loss of attaching bolt torque for the main rotor blade hub pillow blocks, accomplish the following:

  (a) Remove the four nuts and bolts that attach the pillow block assemblies to the main rotor yoke and remove the washers, P/N 206-010-171-1, and bushings, P/N 206-010- 170-1.

  (b) Install four flanged bushings, P/N 206-011-128-1, into the pillow blocks with the flanges facing outboard. Secure the pillow blocks to the yoke with appropriate nuts and bolts, with a washer under each nut, and torque the nut and bolt 60 inch pounds, plus drag (tare) torque of the self-locking nut.

(Note: Compliance with items 1, 2, and 3 of Bell Service Bulletin No. 206-75-3, dated May 1, 1975, or later FAA approved revision, will constitute compliance with the requirements of this AD.)

This amendment becomes effective September 19, 1975.

## Affected data sheets (1) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS H2SW](https://openairdocs.org/tcds/H2SW): Bell Textron Canada Limited; names 4 of 12 models: 206B, 206A, 206B-1, 206A-1 (OH-58A)

## Registered aircraft it may apply to (OpenAirDocs)

Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment.

- Aircraft: 861 (861 by airframe model, 0 by engine model)
- Makers: Bell 822, Bell Helicopter Textron 29, Bell Helicopter Textron Canada 10

Models with the most aircraft:

- [Bell 206B](https://openairdocs.org/model/bell-206b): 790 aircraft (airframe model)
- [Bell Helicopter Textron 206B](https://openairdocs.org/model/bell-helicopter-textron-206b): 29 aircraft (airframe model)
- [Bell 206A](https://openairdocs.org/model/bell-206a): 23 aircraft (airframe model)
- [Bell Helicopter Textron Canada 206B](https://openairdocs.org/model/bell-helicopter-textron-canada-206b): 10 aircraft (airframe model)
- [Bell 206A-1](https://openairdocs.org/model/bell-206a-1): 6 aircraft (airframe model)
- [Bell 206B II](https://openairdocs.org/model/bell-206b-ii): 3 aircraft (airframe model)

All 6 models: https://openairdocs.org/ad/75-18-07/models.md
Every aircraft: https://openairdocs.org/ad/75-18-07/aircraft.md

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.