# AD 80-08-02: Engine Strut Root Area Wall Thickness - Type: Airworthiness directive - Status: Current - Products: Boeing 747-100 Series, 747-100B Series, 747-100B SUD Series, 747-200B Series, 747-200C Series, 747-200F Series, 747-300 Series, 747-400 Series, 747-400D Series, 747-400F Series, 747SP Series and 747SR Series - Effective: April 17, 1980 - Superseded by: Nothing supersedes this AD - Product type: Aircraft, Large airplane - Amendment: 39-3738 - Registered aircraft: 63 may be affected, by airframe or engine model (OpenAirDocs) - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/958288C8F282ADFC862568A20072E435.0001 - DRS record last changed: May 30, 2024 - Page: https://openairdocs.org/ad/80-08-02 ## The airworthiness directive 80-08-02 BOEING: Amendment 39-3738. Applies to all Model 747 series airplanes certificated in all categories equipped with General Electric CF6 or Pratt and Whitney JT9D-3, - 7, engines. Compliance required within 300 landings after the effective date of this AD unless already accomplished. Inspect diagonal braces as follows: A. Measure the outboard engine strut diagonal brace forward clevis root area wall thickness. If root wall thickness is 0.350 inch or greater, no further action is required. If the wall thickness is less than 0.350 inch, penetrant inspect the area for cracks, in accordance with Boeing Service Bulletin 747-54-2070. If cracks are found, prior to further flight replace brace or rework in accordance with paragraph B of this AD. B. Parts cracked within the limits of paragraph III of Boeing Service Bulletin 747-54- 2070 may be reworked as noted therein. Parts with cracks exceeding these limits must be replaced or reworked in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region. C. Upon request of the operator, an FAA Principal Maintenance Inspector, subject to prior approval of the Chief, Engineering and Manufacturing Branch, FAA Northwest Region may adjust the compliance times if the request contains substantiating data to justify the increase for that operator. D. This AD may be amended in the future to require a repeat inspection interval or terminating action. E. Aircraft may be ferried to a base for maintenance in accordance with Section 21.197 and 21.199 of the Federal Aviation Regulations. The manufacturer's specifications and procedures identified and described in this directive are incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1). All persons affected by this directive who have not already received these documents from the manufacturer, may obtain copies upon request to Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124. These documents may also be examined at FAA Northwest Region, 9010 East Marginal Way South, Seattle, Washington 98108. This amendment becomes effective April 17, 1980. ## Affected data sheets (1) (OpenAirDocs) The type certificate data sheets whose models the AD names. - [TCDS A20WE](https://openairdocs.org/tcds/A20WE): The Boeing Company; names 12 of 14 models: 747-100B Series, 747SP Series, 747-400D Series, 747-400F Series, 747-200B Series, 747-200F Series, 747-300 Series, 747-200C Series… ## Registered aircraft it may apply to (OpenAirDocs) Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment. - Aircraft: 63 (63 by airframe model, 0 by engine model) - Makers: Boeing 63 Models with the most aircraft: - [Boeing 747-446](https://openairdocs.org/model/boeing-747-446): 10 aircraft (airframe model) - [Boeing 747-422](https://openairdocs.org/model/boeing-747-422): 8 aircraft (airframe model) - [Boeing 747-412](https://openairdocs.org/model/boeing-747-412): 5 aircraft (airframe model) - [Boeing 747-400F](https://openairdocs.org/model/boeing-747-400f): 4 aircraft (airframe model) - [Boeing 747-409](https://openairdocs.org/model/boeing-747-409): 4 aircraft (airframe model) - [Boeing 747-481F](https://openairdocs.org/model/boeing-747-481f): 3 aircraft (airframe model) - [Boeing 747-409F](https://openairdocs.org/model/boeing-747-409f): 3 aircraft (airframe model) - [Boeing 747-481](https://openairdocs.org/model/boeing-747-481): 3 aircraft (airframe model) - [Boeing 747-428F](https://openairdocs.org/model/boeing-747-428f): 3 aircraft (airframe model) - [Boeing 747-123](https://openairdocs.org/model/boeing-747-123): 2 aircraft (airframe model) - [Boeing 747-251F](https://openairdocs.org/model/boeing-747-251f): 2 aircraft (airframe model) - [Boeing 747-443](https://openairdocs.org/model/boeing-747-443): 2 aircraft (airframe model) - [Boeing 747-438](https://openairdocs.org/model/boeing-747-438): 2 aircraft (airframe model) - [Boeing 747-428](https://openairdocs.org/model/boeing-747-428): 2 aircraft (airframe model) - [Boeing 747-257B](https://openairdocs.org/model/boeing-747-257b): 1 aircraft (airframe model) - [Boeing 747-283B](https://openairdocs.org/model/boeing-747-283b): 1 aircraft (airframe model) - [Boeing 747-121](https://openairdocs.org/model/boeing-747-121): 1 aircraft (airframe model) - [Boeing 747-131](https://openairdocs.org/model/boeing-747-131): 1 aircraft (airframe model) - [Boeing 747-128](https://openairdocs.org/model/boeing-747-128): 1 aircraft (airframe model) - [Boeing 747-273C](https://openairdocs.org/model/boeing-747-273c): 1 aircraft (airframe model) All 24 models: https://openairdocs.org/ad/80-08-02/models.md Every aircraft: https://openairdocs.org/ad/80-08-02/aircraft.md Its text cites no advisory circulars or STCs. --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.