# AD 85-03-06 R1: Upper Drag Angles Insp. - Type: Airworthiness directive - Status: Current - Products: Boeing 737-100 Series, 737-200 Series, 737-200C Series, 737-300 Series, 737-400 Series, 737-500 Series, 737-600 Series, 737-700 Series and 737-800 Series - Effective: February 3, 1986 - Superseded by: Nothing supersedes this AD - Product type: Aircraft, Large airplane - Amendment: 39-5205 - Registered aircraft: 823 may be affected, by airframe or engine model (OpenAirDocs) - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/04F8673640F5D55D862568A900703FD6.0001 - DRS record last changed: May 30, 2024 - Page: https://openairdocs.org/ad/85-03-06-R1 ## The airworthiness directive 85-03-06 R1 BOEING: Amendment 39-4998 as amended by Amendment 39-5205. Applies to Model 737 series airplanes certificated in all categories listed in Boeing Service Bulletin 737-53- 1031, Revision 3, dated October 28, 1983. To prevent rapid decompression resulting from undetected cracking of the wing-to-body drag angle, accomplish the following (unless previously accomplished) prior to the accumulation of 8,000 landings on Group I airplanes, or 35,000 landings on Group II airplanes, or within 1 year or 4,000 landings from the effective date of this AD, whichever occurs later: A. Visually inspect the upper drag angles for cracks in accordance with the Flight Safety Addendum of Boeing Service Bulletin 737-53-1031, Revision 3, or later FAA approved revisions. Repeat the visual inspections at intervals not to exceed 4,000 landings. B. If cracks are found, replace cracked parts with new aluminum parts and continue the inspections of paragraph A., above, or modify in accordance with the Accomplishment Instructions in Boeing Service Bulletin 737-53-1031, Revision 1, or later FAA-approved revisions. C. Modification of airplanes in accordance with Accomplishment Instructions of Boeing Service Bulletin 737-53-1031, Revision 1, or later FAA-approved revisions, constitutes terminating action for this AD. D. Airplanes may be flown to a maintenance base for drag angle replacement or modification in accordance with FAR 21.197 and 21.199 with prior approval of the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region. E. For purposes of complying with the AD, subject to acceptance by the assigned FAA Principal Maintenance Inspector, the number of landings may be determined by dividing each airplane's time in service by the operator's fleet average time from takeoff to landing for the airplane type. F. Alternate means of compliance which provide an acceptable level of safety may be used when approved by the Manager, Seattle Aircraft Certification Office, Northwest Mountain Region, Seattle, Washington. G. Upon request by the operator, an FAA Principal Maintenance Inspector, subject to prior approval by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region, may adjust the repetitive inspection intervals in this AD, if the request contains substantiating data to justify the increase for the operator. All persons affected by this directive who have not already received these documents from the manufacturer may obtain copies upon request to the Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. Amendment 39-4998 became effective March 11, 1985. This Amendment 39-5205 becomes effective February 3, 1986. ## Affected data sheets (1) (OpenAirDocs) The type certificate data sheets whose models the AD names. - [TCDS A16WE](https://openairdocs.org/tcds/A16WE): The Boeing Company; names 9 of 17 models: 737-500 Series, 737-100 Series, 737-200C Series, 737-800 Series, 737-300 Series, 737-200 Series, 737-700 Series, 737-400 Series… ## Registered aircraft it may apply to (OpenAirDocs) Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment. - Aircraft: 823 (823 by airframe model, 0 by engine model) - Makers: Boeing 823 Models with the most aircraft: - [Boeing 737-823](https://openairdocs.org/model/boeing-737-823): 278 aircraft (airframe model) - [Boeing 737-800](https://openairdocs.org/model/boeing-737-800): 139 aircraft (airframe model) - [Boeing 737-824](https://openairdocs.org/model/boeing-737-824): 135 aircraft (airframe model) - [Boeing 737-832](https://openairdocs.org/model/boeing-737-832): 73 aircraft (airframe model) - [Boeing 737-890](https://openairdocs.org/model/boeing-737-890): 60 aircraft (airframe model) - [Boeing 737-724](https://openairdocs.org/model/boeing-737-724): 36 aircraft (airframe model) - [Boeing 737-790](https://openairdocs.org/model/boeing-737-790): 14 aircraft (airframe model) - [Boeing 737-752](https://openairdocs.org/model/boeing-737-752): 13 aircraft (airframe model) - [Boeing 737-400](https://openairdocs.org/model/boeing-737-400): 8 aircraft (airframe model) - [Boeing 737-852](https://openairdocs.org/model/boeing-737-852): 7 aircraft (airframe model) - [Boeing 737-500](https://openairdocs.org/model/boeing-737-500): 6 aircraft (airframe model) - [Boeing 737-436](https://openairdocs.org/model/boeing-737-436): 6 aircraft (airframe model) - [Boeing 737-700](https://openairdocs.org/model/boeing-737-700): 5 aircraft (airframe model) - [Boeing 737-300](https://openairdocs.org/model/boeing-737-300): 4 aircraft (airframe model) - [Boeing 737-883](https://openairdocs.org/model/boeing-737-883): 4 aircraft (airframe model) - [Boeing 737-205](https://openairdocs.org/model/boeing-737-205): 3 aircraft (airframe model) - [Boeing 737-490](https://openairdocs.org/model/boeing-737-490): 3 aircraft (airframe model) - [Boeing 737-484](https://openairdocs.org/model/boeing-737-484): 3 aircraft (airframe model) - [Boeing 737-732](https://openairdocs.org/model/boeing-737-732): 3 aircraft (airframe model) - [Boeing 737-524](https://openairdocs.org/model/boeing-737-524): 3 aircraft (airframe model) All 40 models: https://openairdocs.org/ad/85-03-06-R1/models.md Every aircraft: https://openairdocs.org/ad/85-03-06-R1/aircraft.md Its text cites no advisory circulars or STCs. --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.