# AD 87-16-05: Supplemental Inspections

- Type: Airworthiness directive
- Status: Current
- Products: Lockheed Martin 188A and 188C
- Effective: August 31, 1987
- Superseded by: Nothing supersedes this AD
- Product type: Aircraft, Large airplane
- Amendment: 39-5687
- Registered aircraft: 4 may be affected, by airframe or engine model (OpenAirDocs)
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/83FB0C0E2B3844D886256976005105C9.0001
- DRS record last changed: May 30, 2024
- Page: https://openairdocs.org/ad/87-16-05

## The airworthiness directive

87-16-05 LOCKHEED-CALIFORNIA COMPANY: Amendment 39-5687. Applies to Lockheed Model L-188A and L-188C airplanes, certificated in any category. Compliance required as indicated, unless previously accomplished.

To ensure the continuing structural integrity of these airplanes, accomplish the following:

A. Within one year after the effective date of this AD, incorporate a revision into the FAA-approved maintenance inspection program which provides no less than the requirements specified for the structurally significant details listed in Section III C. of Lockheed Report No. LR29428, dated January 16, 1984, and Revision A, dated May 14, 1986, or later revision approved by the Manager, Los Angeles Aircraft Certification Office, FAA, Northwest Mountain Region.

B. Cracks found in the structurally significant details as a result of the supplemental inspections required by paragraph A., above, must be repaired before further flight in accordance with an FAA-approved method.C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate the airplane to a base to accomplish the requirements of this AD.

D. Alternate means of compliance which provide an acceptable level of safety may be used when approved by the Manager, Los Angeles Aircraft Certification Office, FAA, Northwest Mountain Region.

All persons affected by this directive who have not already received the appropriate service information from the manufacturer may obtain copies upon request to Lockheed-California Company, P.O. Box 551, Burbank, California 91520, Attention: Commercial Order Administration Dept. 65-33, U-33, B-1. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Los Angeles Aircraft Certification Office, 4344 Donald Douglas Drive, Long Beach, California.

This Amendment becomes effective August 31, 1987.

## Affected data sheets (1) (OpenAirDocs)

The type certificate data sheets whose models the AD names.

- [TCDS 4A22](https://openairdocs.org/tcds/4A22): Lockheed Martin Corporation; names 2 of 2 models: 188A, 188C

## Registered aircraft it may apply to (OpenAirDocs)

Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment.

- Aircraft: 4 (4 by airframe model, 0 by engine model)
- Makers: Lockheed 4

Models with the most aircraft:

- [Lockheed 188C](https://openairdocs.org/model/lockheed-188c): 3 aircraft (airframe model)
- [Lockheed 188A](https://openairdocs.org/model/lockheed-188a): 1 aircraft (airframe model)

All 2 models: https://openairdocs.org/ad/87-16-05/models.md
Every aircraft: https://openairdocs.org/ad/87-16-05/aircraft.md

Its text cites no advisory circulars or STCs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.