# AD 89-10-11 R1: Rfm Limitations - Type: Airworthiness directive - Status: Current - Products: Bell Helicopter Textron Canada 206A and 206B - Effective: July 31, 1989 - Superseded by: Nothing supersedes this AD - Product type: Aircraft, Rotorcraft - Amendment: 39-6283 - Docket: 88-ASW-55 - Registered aircraft: 856 may be affected, by airframe or engine model (OpenAirDocs) - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/58E03EFEA83F42CD86256A4E004E1137.0001 - DRS record last changed: May 30, 2024 - Page: https://openairdocs.org/ad/89-10-11-R1 ## The airworthiness directive 89-10-11 R1 BELL HELICOPTER TEXTRON, INC.: Amendment 39-6211 as corrected by Amendment 39-6283. (Airworthiness Docket No. 88-ASW-55) Applicability: Bell Helicopter Textron, Inc., Model 206A and 206B helicopters certificated in any category. Compliance: Required as indicated, unless already accomplished. To prevent possible in-flight engine flameout, which could result in the loss of the helicopter, accomplish the following: (a) Within the next 20 days after the effective date of this AD, revise the following Rotorcraft Flight Manual and Rotorcraft Flight Manual Supplements, as applicable. (1) For Model 206A helicopters, revise the FAA approved Rotorcraft Flight Manual (RFM) No. BHT-206A-FM-1 Operating Limitations, Section 1, Type of Operation, by adding the following: The following equipment shall be installed when conducting flight operations in falling and/or blowing snow to prevent possibility of engine flameout: The Particle Separator Engine Air Induction System Kit and the Deflector Kit. (See BHT-206A-FMS-18 and BHT-206A-FMS-24.) or The Snow Winterization Air Induction System. (See BHT-206A-FMS- 11.) (2) For Model 206A helicopters, revise the FAA approved Rotorcraft Flight Manual Supplement (RFMS) Nos. BHT-206A-FMS-18 and BHT-206A-FMS-24 Operating Limitations, Section 1, Type of Operation, by adding the following: The FAA approved Engine Air Induction Deflector Kit No. 206-706-136 shall be installed in conjunction with the Particle Separator Air Inducting Kit No. 206-706-201-17 or 206-706-200-9 when conducting flight operations in falling and/or blowing snow, and the following limits apply: Hover flight in falling and/or blowing snow is limited to a 20-minute duration after which the helicopter must be landed and checked for snow and/or ice accumulation. Flight operations are prohibited when visibility in falling and/or blowing snow is less than one- half (1/2) statute mile. (3) For Model 206B (206B II) helicopters, revise the FAA approved RFM No. BHT-206B-FM-1 Operating Limitations, Section 1, Type of Operation, by adding the following: The following equipment shall be installed when conducting flight operations in falling and/or blowing snow to prevent possibility of engine flameout: The Particle Separator Engine Air Induction System Kit and The Deflector Kit. (See BHT-206B-FMS-15 and BHT-206B-FMS-18.) (4) For Model 206B (206B II) helicopters, revise FAA approved RFMS Nos. BHT-206B-FMS-15 and BHT-206B-FMS-18 Operating Limitations, Section 1, Type of Operation, by adding the following: The FAA approved Engine Air Induction Deflector Kit No. 206-706-136 shall be installed in conjunction with the Particle Separator Air Induction Kit No. 206-706-200-5 or 206-706-201-11 when conducting flight operations in falling and/or blowing snow, and the following limits apply: Hover flight in falling and/or blowing snow is limited to a 20-minute duration after which the helicopter must be landed and checked for snow and/or ice accumulation. Flight operations are prohibited when visibility in falling and/or blowing snow is less than one- half (1/2) statute mile. (5) For Model 206B (206B III) helicopters, revise the FAA approved RFM No. BHT-206B3-FM-1 Operating Limitations, Section 1, Type of Operation, by adding the following: The following equipment shall be installed when conducting flight operations in falling and/or blowing snow to prevent possibility of engine flameout: The Particle Separator Engine Air Induction System Kit and the Deflector Kit. (See BHT-206B3-FMS-10 and BHT-206B3-FMS-12.) (6) For Model 206B (206B III) helicopters, revise the FAA approved RFM Nos. BHT-206B3-FMS-10 and BHT-206B3-FMS-12 Operating Limitations, Section 1, Type of Operation, by adding the following: The FAA approved Engine Air Induction Deflector Kit No. 206-706-136 shall be installed in conjunctionwith the Particle Separator Air Induction Kit No. 206-706-201 or 206-706-200 when conducting flight operations in falling and/or blowing snow, and the following limits apply: Hover flight in falling and/or blowing snow is limited to a 20-minute duration after which the helicopter must be landed and checked for snow and/or ice accumulation. Flight operations are prohibited when visibility in falling and/or blowing snow is less than one- half (1/2) statute mile. (b) Adding the following RFM and RFMS revisions to the basic RFM manual, as applicable, is an approved alternate method of compliance with paragraph (a) of this AD: BHT-206A-FM-1, Rev. D-39 BHT-206A-FMS-18, Rev. 6 BHT-206A-FMS-24, Rev. 3 BHT-206B-FM-1, Rev. B-39 BHT-206B-FMS-15, Rev. 4 BHT-206B-FMS-18, Rev. 3 BHT-206B3-FM-1, Rev. 18 BHT-206B3-FMS-12, Rev. 1 BHT-206B3-FMS-10, Rev. 1 (c) An alternate method of compliance, which provides an equivalent level of safety, may be used when approvedby the Manager, Helicopter Certification Branch, Federal Aviation Administration, Fort Worth, Texas 76193-0170. Airworthiness Directive 89-10-11 (Amendment 39-6211) became effective on June 8, 1989. This amendment (39-6283, AD 89-10-11 R1) becomes effective on July 31, 1989. ## Affected data sheets (1) (OpenAirDocs) The type certificate data sheets whose models the AD names. - [TCDS H2SW](https://openairdocs.org/tcds/H2SW): Bell Textron Canada Limited; names 2 of 12 models: 206B, 206A ## Registered aircraft it may apply to (OpenAirDocs) Matched by airframe and engine model; the AD's applicability may narrow it by serial number, part number or equipment. - Aircraft: 856 (856 by airframe model, 0 by engine model) - Makers: Bell 817, Bell Helicopter Textron 29, Bell Helicopter Textron Canada 10 Models with the most aircraft: - [Bell 206B](https://openairdocs.org/model/bell-206b): 791 aircraft (airframe model) - [Bell Helicopter Textron 206B](https://openairdocs.org/model/bell-helicopter-textron-206b): 29 aircraft (airframe model) - [Bell 206A](https://openairdocs.org/model/bell-206a): 23 aircraft (airframe model) - [Bell Helicopter Textron Canada 206B](https://openairdocs.org/model/bell-helicopter-textron-canada-206b): 10 aircraft (airframe model) - [Bell 206B II](https://openairdocs.org/model/bell-206b-ii): 3 aircraft (airframe model) All 5 models: https://openairdocs.org/ad/89-10-11-R1/models.md Every aircraft: https://openairdocs.org/ad/89-10-11-R1/aircraft.md Its text cites no advisory circulars or STCs. --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.