# N10JS: Siegel Jerry S PRESCOTT PUSHER

- Status: Valid registration
- Airframe: [Siegel Jerry S PRESCOTT PUSHER](https://openairdocs.org/model/siegel-jerry-s-prescott-pusher) (registry code 05616PX, 4 seats)
- Engine: [Allison 250 series](https://openairdocs.org/engine/allison-250-series) (registry code 03014)
- Serial number: 008
- Type: Fixed wing single engine
- Engine type: Reciprocating
- Airworthiness: Experimental, amateur built
- Airworthiness date: October 2, 1991
- Certificate issued: February 13, 2024
- Expires: February 28, 2031
- Mode S code: A00334
- Registered owner: [Siegel Jerry S](https://openairdocs.org/faa-owner/SIEGEL%20JERRY%20S)
- Location: [Los Angeles, CA](https://openairdocs.org/faa-place/CA/Los%20Angeles)
- Owner type: Individual
- Owner's area on the map: 34.0610° N, 118.2999° W: Placed by OpenAirDocs at the center of ZIP code 90010, within about a mile (OpenAirDocs). The owner's mailing address, not where the aircraft is based
- FAA registry: https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=10JS
- Page: https://openairdocs.org/aircraft/N10JS

From the FAA registry file of October 21, 2026. ADs below are matched by the registry's airframe and engine model codes. They may apply; each AD's applicability can narrow it by serial number, part number or installed equipment. This is not a compliance determination. The registry lists only the engine series, so ADs for every Allison 250 model are included.

## ADs that may apply (OpenAirDocs): 54 in force

### Matched by airframe (Siegel Jerry S PRESCOTT PUSHER)

None in force.

### Matched by engine (Allison 250 series)

- [AD 2022-10-06](https://openairdocs.org/ad/2022-10-06): Turbine Section · Rolls-Royce 250-C20, 250-C20B, 250-C20C (T63-A-720) and 9 more. Effective Jun 28, 2022
- [AD 2018-13-01](https://openairdocs.org/ad/2018-13-01): Turbine Governor · Rolls-Royce 250-C10 (T63-A-5), 250-C18, 250-C18A and 24 more. Effective Aug 16, 2018
- [AD 2006-20-07](https://openairdocs.org/ad/2006-20-07): Adds an additional life limit for third- and fourth-stage turbine wheels · Rolls-Royce 250-C30, 250-C30G, 250-C30G/2 and 11 more. Effective Nov 2, 2006
- [AD 2006-16-04](https://openairdocs.org/ad/2006-16-04): Inspection of the fuel nozzle screen · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 43 more. Effective Sep 7, 2006
- [AD 2006-13-06](https://openairdocs.org/ad/2006-13-06): Gas producer rotor assembly tie bolts · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 16 more. Effective Jul 26, 2006
- [AD 2005-20-11](https://openairdocs.org/ad/2005-20-11): Airfoils at the hub and shroud of third-stage turbine wheels · Rolls-Royce 250-C28, 250-C28B and 250-C28C. Effective Oct 18, 2005
- [AD 2005-10-13](https://openairdocs.org/ad/2005-10-13): Turbine energy absorbing ring · Rolls-Royce 250-B17B, 250-B17C, 250-B17D and 7 more. Effective Jun 22, 2005
- [AD 2004-26-09](https://openairdocs.org/ad/2004-26-09): Compressor Adaptor Couplings · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 8 more. Effective Feb 8, 2005
- [AD 2004-24-04](https://openairdocs.org/ad/2004-24-04): Hydromechanical unit (HMU) Power Lever Angle (PLA) potentiometer · Rolls-Royce 250-C30R/3, 250-C30R/3M, 250-C47B and 1 more. Effective Jan 3, 2005
- [AD 2004-14-02](https://openairdocs.org/ad/2004-14-02): SN third-stage turbine wheels · Rolls-Royce 250-C28, 250-C28B and 250-C28C. Effective Jul 26, 2004
- [AD 2002-06-08](https://openairdocs.org/ad/2002-06-08): Third Stage Turbine Wheels · Rolls-Royce 250-C28, 250-C28B and 250-C28C. Effective Apr 26, 2002
- [AD 2001-24-12](https://openairdocs.org/ad/2001-24-12): Helical Torquemeter Gearshaft Assembly · Rolls-Royce 250-B17, 250-B17C, 250-B17D and 13 more. Effective Dec 19, 2001
- [AD 98-24-28](https://openairdocs.org/ad/98-24-28): Main Fuel Control Bellows · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 36 more. Effective Jan 7, 1999
- [AD 98-10-03](https://openairdocs.org/ad/98-10-03): Hydromechanical Unit · Rolls-Royce 250-C47B. Effective May 26, 1998
- [AD 97-25-09](https://openairdocs.org/ad/97-25-09): Helical Power Takeoff Gearshaft Assembly · Rolls-Royce 250-C40B. Effective Dec 23, 1997
- [AD 96-19-01](https://openairdocs.org/ad/96-19-01): Superior Air Parts Manufacture Approval (PMA) Bearings · Rolls-Royce 250-B15G, 250-B17F, 250-B17F/1 and 17 more. Effective Sep 26, 1996
- [AD 93-25-05](https://openairdocs.org/ad/93-25-05): Driveshaft Flex Coupling Bolts, Bushings, and Nuts · Rolls-Royce 250-C20S with STC SE2352NM. Effective Feb 22, 1994
- [AD 89-23-12](https://openairdocs.org/ad/89-23-12): Turbine Nozzle Assembly · Rolls-Royce 250-C28B and 250-C28C. Effective Oct 29, 1989
- [AD 88-17-01](https://openairdocs.org/ad/88-17-01): Fuel Controls · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 26 more. Effective Mar 1, 1989
- [AD 88-07-06](https://openairdocs.org/ad/88-07-06): Gas Producer Support Pressure Oil Tube Assembly · Rolls-Royce 250-C30, 250-C30M, 250-C30P and 2 more. Effective Mar 30, 1988
- [AD 86-20-13](https://openairdocs.org/ad/86-20-13): External Splines · Rolls-Royce 250-C28B, 250-C28C, 250-C30 and 9 more. Effective Dec 3, 1986
- [AD 86-19-12](https://openairdocs.org/ad/86-19-12): Gas Producer Turbine Rotor · Rolls-Royce 250-C30, 250-C30G, 250-C30G/2 and 7 more. Effective Oct 3, 1986
- [AD 85-25-07 R1](https://openairdocs.org/ad/85-25-07-R1): Outer Combustion Case Assembly · Rolls-Royce 250-C28, 250-C28B, 250-C28C and 10 more. Effective Aug 15, 1986
- [AD 86-16-03](https://openairdocs.org/ad/86-16-03): Scavenge Line Air/Oil Centrifugal Separator Assembly · Rolls-Royce 250-C28B and 250-C28C. Effective Aug 13, 1986
- [AD 85-25-12](https://openairdocs.org/ad/85-25-12): Turbine-To-Compressor-Coupling · Rolls-Royce 250-C28B and 250-C28C. Effective Jan 6, 1986
- [AD 85-25-09](https://openairdocs.org/ad/85-25-09): Turbine Shafts And Couplings · Rolls-Royce 250-C28B and 250-C28C. Effective Jan 6, 1986
- [AD 85-25-08](https://openairdocs.org/ad/85-25-08): Compressor Mount Assembly · Rolls-Royce 250-C28B, 250-C28C, 250-C30 and 2 more. Effective Jan 6, 1986
- [AD 84-24-54 R2](https://openairdocs.org/ad/84-24-54-R2): Gas Producer Turbine Rotor · Rolls-Royce 250-C30, 250-C30P, 250-C30R (T703-AD-700) and 1 more. Effective Jan 6, 1986
- [AD 85-06-51](https://openairdocs.org/ad/85-06-51): Magnetic Plugs · Rolls-Royce 250-C30 and 250-C30S. Effective May 10, 1985
- [AD 84-17-51](https://openairdocs.org/ad/84-17-51): Turbine Rotor Assembly · Rolls-Royce 250-C30 and 250-C30S. Effective Dec 26, 1984
- [AD 83-03-02 R1](https://openairdocs.org/ad/83-03-02-R1): Slotted Third Stage Turbine Wheels · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 5 more. Effective Feb 28, 1984
- [AD 81-13-12 R1](https://openairdocs.org/ad/81-13-12-R1): 4th Stage Turbine Nozzle Assembly · Rolls-Royce 250-C30, 250-C30P and 250-C30S. Effective Sep 26, 1983
- [AD 83-01-04](https://openairdocs.org/ad/83-01-04): Turbine Assemblies · Rolls-Royce 250-C28B and 250-C28C. Effective Jan 24, 1983
- [AD 82-24-05](https://openairdocs.org/ad/82-24-05): Control Assembly and Power Turbine Governor Assembly · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 43 more. Effective Nov 26, 1982
- [AD 82-13-03](https://openairdocs.org/ad/82-13-03): Modify Engine High Pressure Fuel Control Filter Assembly · Rolls-Royce 250-C20 and 250-C20B. Effective Jul 1, 1982
- [AD 82-12-04](https://openairdocs.org/ad/82-12-04): Combined Power Turbine and Propeller Governor Assembly · Cessna 401, 401A, 401B and 11 more. Effective Jun 7, 1982
- [AD 82-03-02](https://openairdocs.org/ad/82-03-02): N2 (Electronic) Overspeed Control System · Rolls-Royce 250-C28B. Effective Feb 4, 1982
- [AD 79-21-01 R1](https://openairdocs.org/ad/79-21-01-R1): Third Stage Turbine Wheel Blade · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 3 more. Effective Jun 3, 1981
- [AD 79-16-06](https://openairdocs.org/ad/79-16-06): Accessory Drive Gearbox · Rolls-Royce 250-C28, 250-C28B, 250-C28C and 10 more. Effective Jan 11, 1980
- [AD 78-14-08](https://openairdocs.org/ad/78-14-08): Fuel Pump Drive Spline · Rolls-Royce 250-C18, 250-C18A, 250-C18B and 3 more. Effective Oct 24, 1979
- [AD 79-18-13](https://openairdocs.org/ad/79-18-13): Third Stage Turbine Wheel · Rolls-Royce 250-C28B and 250-C28C. Effective Sep 6, 1979
- [AD 79-06-05](https://openairdocs.org/ad/79-06-05): Overspeed Control System · Rolls-Royce 250-C28B and 250-C30. Effective Mar 26, 1979
- [AD 78-26-01](https://openairdocs.org/ad/78-26-01): Engine Electrical System · Rolls-Royce 250-C28B. Effective Nov 3, 1978
- [AD 77-15-12](https://openairdocs.org/ad/77-15-12): Power Turbine Coupling Nut · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 23 more. Effective Sep 23, 1977
- [AD 77-09-08](https://openairdocs.org/ad/77-09-08): Bleed Valve Diaphragm · Rolls-Royce 250-B17, 250-B17B, 250-C20 and 2 more. Effective Jul 18, 1977
- [AD 74-14-03](https://openairdocs.org/ad/74-14-03): Fuel Control Rigging · Rolls-Royce 250-C20. Effective Jul 10, 1974
- [AD 73-19-07](https://openairdocs.org/ad/73-19-07): Turbine Governor-To-Fuel Control Tube · Rolls-Royce 250-C20. Effective Sep 14, 1973
- [AD 72-03-06](https://openairdocs.org/ad/72-03-06): Turbine Wheels · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 9 more. Effective Feb 8, 1972
- [AD 69-26-03](https://openairdocs.org/ad/69-26-03): Modify Power and Accessories Gear Box · Rolls-Royce 250-C18, 250-C18A, 250-C18B and 1 more. Effective Dec 25, 1969
- [AD 69-18-04](https://openairdocs.org/ad/69-18-04): Torquemeter Shaftgear · Rolls-Royce 250-C10 (T63-A-5), 250-C10B (T63-A-5A), 250-C10D (T63-A-700) and 4 more. Effective Oct 18, 1969

### Historical (superseded or no longer in force)

- [AD 2017-18-14](https://openairdocs.org/ad/2017-18-14) (historical): Turbine Section · Rolls-Royce 250-C20, 250-C20B, 250-C20F and 8 more. Effective Oct 13, 2017
- [AD 2015-02-22](https://openairdocs.org/ad/2015-02-22) (historical): Repetitive visual inspections · Rolls-Royce 250-B17, 250-B17B, 250-B17C and 15 more. Effective Mar 9, 2015
- [AD 2012-14-06](https://openairdocs.org/ad/2012-14-06) (historical): Released turbine blades and shrouds · Rolls-Royce 250-C20, 250-C20B and 250-C20R/2. Effective Aug 14, 2012
- [AD 2004-24-09](https://openairdocs.org/ad/2004-24-09) (historical): Fuel nozzle · Rolls-Royce 250-B15A, 250-B15E, 250-B15G and 40 more. Effective Jan 5, 2005
- [AD 2003-13-10](https://openairdocs.org/ad/2003-13-10) (historical): Hydromechanical unit (HMU) power lever angle (PLA) · 250-C30R/3, 250-C30R/3M, 250-C47B and 1 more. Effective Jul 15, 2003
- [AD 2001-20-51](https://openairdocs.org/ad/2001-20-51) (historical): Helical Torquemeter Gearshaft Assembly · 250-B17, 250-B17C, 250-B17D and 12 more
- [AD 97-21-09](https://openairdocs.org/ad/97-21-09) (historical): Engine Main Electrical Harness Assembly · 250-C47B. Effective Dec 3, 1997
- [AD 96-24-09](https://openairdocs.org/ad/96-24-09) (historical): Engine Main Electrical Harness Assembly · 250-C47B. Effective Nov 25, 1996

All 62: https://openairdocs.org/aircraft/N10JS/ads.md

## Information bulletins (advisory) (6 in force)

- [SAIB NE-06-52](https://openairdocs.org/saib/NE-06-52): . Issued Jul 6, 2006
- [SAIB NE-06-12R1](https://openairdocs.org/saib/NE-06-12R1): . Issued Jan 13, 2006
- [SAIB NE-04-58](https://openairdocs.org/saib/NE-04-58): . Issued Mar 24, 2004
- [SAIB NE-04-57](https://openairdocs.org/saib/NE-04-57): . Issued Mar 24, 2004
- [SAIB NE-04-56](https://openairdocs.org/saib/NE-04-56): . Issued Mar 24, 2004
- [SAIB CE-01-10](https://openairdocs.org/saib/CE-01-10): . Issued Jan 24, 2001
- [SAIB NE-06-12](https://openairdocs.org/saib/NE-06-12) (historical): . Issued Dec 2, 2005

## NTSB investigations

None matched to N10JS.

## FAA accident and incident reports (3)

From the FAA Accident/Incident Data System. Reports are matched to registry aircraft by N-number and event date; the registry's history has gaps, so older matches can be wrong. Compare the reported make and model.

- [Incident 19930526023549I](https://openairdocs.org/incident/19930526023549I), May 26, 1993: Amtrpa PUSHER (N10JS), Duluth, MN, Minor damage. Nose gear collapsed on landing rollout. Nose gear had collapsed on several previous occasions.
- [Incident 19920722054749I](https://openairdocs.org/incident/19920722054749I), Jul 22, 1992: Amtrpa PUSHER (N10JS), Duluth, MN, Minor damage. Nose gear collapsed on landing rollout. Found torque pin was sheared in nose landing gear drag brace.
- [Incident 19911030052699I](https://openairdocs.org/incident/19911030052699I), Oct 30, 1991: Amtrpa PUSHER (N10JS), Duluth, MN, Minor damage. Aircraft lost engine power. Nose gear collapsed on rollout at airport. Home made propeller shaft broke.

## Service difficulty reports

None filed for this aircraft. Reports filed since April 24, 1974, when the mark's previous registration was cancelled.

## Earlier aircraft with N10JS

The FAA can reassign an N-number once a registration is cancelled. These aircraft carried N10JS before.

- [Cancelled 1974-04-24](https://openairdocs.org/deregistered/N10JS-1974-04-24): Crane-Southworth BREEZY, S/N DJ-3. Owner: [Mercer Larry](https://openairdocs.org/faa-owner/MERCER%20LARRY), [Miami Springs, FL](https://openairdocs.org/faa-place/FL/Miami%20Springs)

## Related

- Other Siegel Jerry S PRESCOTT PUSHER aircraft: https://openairdocs.org/model/siegel-jerry-s-prescott-pusher/aircraft.md
- STCs for the Siegel Jerry S PRESCOTT PUSHER: https://openairdocs.org/model/siegel-jerry-s-prescott-pusher/stcs.md
- The Allison 250 series engine: https://openairdocs.org/engine/allison-250-series.md

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.