# N127VV: 2003 Kube Robert C ZENITH STOL CH 701

- Status: Valid registration
- Airframe: [Kube Robert C ZENITH STOL CH 701](https://openairdocs.org/model/kube-robert-c-zenith-stol-ch-701) (registry code 05614CX, 2 seats)
- Engine: [Rotax 912ULS series](https://openairdocs.org/engine/rotax-912uls-series) (registry code 55572)
- Serial number: 74326
- Year built: 2003
- Type: Fixed wing single engine
- Engine type: Reciprocating
- Kit: Zenair Ltd CH-300
- Airworthiness: Experimental, amateur built
- Airworthiness date: April 4, 2019
- Certificate issued: May 18, 2022
- Expires: May 31, 2029
- Mode S code: A06FA2
- Registered owner: [Jensen Perry S](https://openairdocs.org/faa-owner/JENSEN%20PERRY%20S)
- Location: [Cameron Park, CA](https://openairdocs.org/faa-place/CA/Cameron%20Park)
- Owner type: Individual
- Owner's area on the map: 38.5990° N, 120.9631° W: Placed by OpenAirDocs at the center of ZIP code 95682, within about 5 miles (OpenAirDocs). The owner's mailing address, not where the aircraft is based
- FAA registry: https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=127VV
- Page: https://openairdocs.org/aircraft/N127VV

From the FAA registry file of October 24, 2026. ADs below are matched by the registry's airframe and engine model codes. They may apply; each AD's applicability can narrow it by serial number, part number or installed equipment. This is not a compliance determination. The registry lists only the engine series, so ADs for every Rotax 912ULS model are included.

## ADs that may apply (OpenAirDocs): 0 in force

### Matched by airframe (Kube Robert C ZENITH STOL CH 701)

None in force.

### Matched by engine (Rotax 912ULS series)

None in force.

## Information bulletins (advisory)

None matched.

## NTSB investigations (1)

From the NTSB's public API. Aircraft are matched to registry aircraft by N-number and event date, checked against the reported serial number, make and model; the registry's history has gaps, so older matches can be wrong. Compare the reported make and model.

- [NTSB GAA18CA393](https://openairdocs.org/ntsb/GAA18CA393), Jul 4, 2018: Zenair Zenith Stol CH 701 (N127VV), San Saba, TX, substantial damage. Probable cause: The pilot’s improper landing flare during the aborted takeoff, which resulted in a hard landing and a nose-over.

## FAA accident and incident reports (1)

From the FAA Accident/Incident Data System. Reports are matched to registry aircraft by N-number and event date, checked against the reported make and model; the registry's history has gaps, so older matches can be wrong. Compare the reported make and model.

- [Accident 20180704009079A](https://openairdocs.org/incident/20180704009079A), Jul 4, 2018: Zenith 701 (N127VV), San Saba, TX, Substantial damage. Pilot and one passenger were departing from San Saba Airport (81R) with the intention to fly to nearby llano airport (kaqo) for some touch and go practice on…

## Service difficulty reports

None filed for this aircraft. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.

## STCs that may be installed (OpenAirDocs)

None matched to this aircraft's models.

## Related

- Other Kube Robert C ZENITH STOL CH 701 aircraft: https://openairdocs.org/model/kube-robert-c-zenith-stol-ch-701/aircraft.md
- The Rotax 912ULS series engine: https://openairdocs.org/engine/rotax-912uls-series.md

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.