# N47PD: Bell 47G-3B-1 - Status: Valid registration - Airframe: [Bell 47G-3B-1](https://openairdocs.org/model/bell-47g-3b-1) (registry code 1181028, 3 seats) - Engine: [Lycoming TVO-435-GIA](https://openairdocs.org/engine/lycoming-tvo-435-gia) (registry code 41526) - Data sheets: [TCDS 2H3](https://openairdocs.org/tcds/2H3) (Scott's-Bell 47 Inc) (OpenAirDocs) - Serial number: 6610 - Type: Rotorcraft - Engine type: Reciprocating - Airworthiness: Standard, normal - Airworthiness date: May 1, 1991 - Certificate issued: October 23, 2021 - Expires: October 31, 2028 - Mode S code: A5C00A - Registered owner: [Guardian Helicopters Inc](https://openairdocs.org/faa-owner/GUARDIAN%20HELICOPTERS%20INC) - Location: [Fillmore, CA](https://openairdocs.org/faa-place/CA/Fillmore) - Owner type: Corporation - Owner's area on the map: 34.4082° N, 118.8651° W: Placed by OpenAirDocs at the center of ZIP code 93015, within about 5 miles (OpenAirDocs). The owner's mailing address, not where the aircraft is based - FAA registry: https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=47PD - Page: https://openairdocs.org/aircraft/N47PD From the FAA registry file of October 22, 2026. ADs below are matched by the registry's airframe and engine model codes. They may apply; each AD's applicability can narrow it by serial number, part number or installed equipment. This is not a compliance determination. ## ADs that may apply (OpenAirDocs): 43 in force ### Matched by airframe (Bell 47G-3B-1) - [AD 2023-09-09](https://openairdocs.org/ad/2023-09-09): Exhaust Turbine System (Recip) · Aerostar PA-60-600 (Aerostar 600), PA-60-601 (Aerostar 601), PA-60-601P (Aerostar 601P) and 292 more. Effective Jul 17, 2023 - [AD 2023-11-07](https://openairdocs.org/ad/2023-11-07): Ground Proximity System · Airbus Helicopters 47, 206, 210 and 237 more. Effective Jun 22, 2023 - [AD 2009-12-01](https://openairdocs.org/ad/2009-12-01): Main rotor blade box beam clip (clip) · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Jun 29, 2009 - [AD 2005-21-04](https://openairdocs.org/ad/2005-21-04): Weld assembly scissors bracket · Revise mast controls and remove stabilizer bar and install… (Scott's-Bell 47 STC SH2772SW). Effective Nov 21, 2005 - [AD 2001-17-17](https://openairdocs.org/ad/2001-17-17): Main Rotor Blade Grip Threads · Scotts-Bell 47 47B, 47B3, 47D and 19 more. Effective Oct 3, 2001 - [AD 98-07-09](https://openairdocs.org/ad/98-07-09): Stabilizer Bar Damper Link Assembly · Scotts-Bell 47 47B, 47B3, 47D and 19 more. Effective May 6, 1998 - [AD 96-06-12](https://openairdocs.org/ad/96-06-12): Inspect Tail Rotor Blade & Abrasion Strip · Scotts-Bell 47 47B, 47B3, 47D and 19 more. Effective May 29, 1996 - [AD 91-20-10](https://openairdocs.org/ad/91-20-10): Main Rotor Grip · Scotts-Bell 47 47G-2, 47G-2A, 47G-2A-1 and 11 more. Effective Nov 14, 1991 - [AD 85-08-03](https://openairdocs.org/ad/85-08-03): Tail Rotor Blade Assemblies · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Apr 29, 1985 - [AD 85-02-06](https://openairdocs.org/ad/85-02-06): AN/NAS Standard Bolts · Scotts-Bell 47 47G-2A, 47G-2A-1, 47G-3 and 12 more. Effective Feb 6, 1985 - [AD 81-17-01](https://openairdocs.org/ad/81-17-01): Starting Vibrator Assemblies · Bendix Starting Vibrator Assemblies, B-2, B-2A and 49 more. Effective Aug 13, 1981 - [AD 80-10-04 R1](https://openairdocs.org/ad/80-10-04-R1): Tail Rotor Blades · Continental Copters OH-13H, OH-13E, OH-13E and 26 more. Effective Feb 28, 1981 - [AD 81-04-03](https://openairdocs.org/ad/81-04-03): Tail Rotor Drive Assembly · Continental Copters OH-13H, OH-13E, OH-13E and 26 more. Effective Feb 2, 1981 - [AD 80-21-09 R1](https://openairdocs.org/ad/80-21-09-R1): Tail Rotor Pitch Link · Continental Copters OH-13H, OH-13E, OH-13E and 26 more. Effective Nov 24, 1980 - [AD 80-23-02](https://openairdocs.org/ad/80-23-02): Turbine Power Conversions · Allison 250-C20/250-C20B engine (Siam Hiller Holdings STC SH177WE or 2 others). Effective Nov 20, 1980 - [AD 79-23-07](https://openairdocs.org/ad/79-23-07): Soloy Conversion per STC SH657NW · Allison 250-C18A, -C18C, -C20, -C20B engine (Siam Hiller Holdings STC SH657NW). Effective Nov 26, 1979 - [AD 78-03-01](https://openairdocs.org/ad/78-03-01): Hopper Support Bracket (STC SH357SW) · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Mar 6, 1978 - [AD 77-21-01](https://openairdocs.org/ad/77-21-01): Tail Rotor Gear Boxes · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Nov 14, 1977 - [AD 70-10-08](https://openairdocs.org/ad/70-10-08): Tail Rotor Grips · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Jul 20, 1976 - [AD 74-08-02](https://openairdocs.org/ad/74-08-02): Mast Control Stabilizer Bar Assembly · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Jun 14, 1974 - [AD 74-07-01](https://openairdocs.org/ad/74-07-01): Main Rotor Control Tube Assembly · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective May 30, 1974 - [AD 73-19-04](https://openairdocs.org/ad/73-19-04): Main Rotor Blade Grip · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Oct 10, 1973 - [AD 72-02-05](https://openairdocs.org/ad/72-02-05): Control Rod Assembly · Scotts-Bell 47 47G, 47G-2, 47G-2A and 11 more. Effective Feb 22, 1972 - [AD 70-08-02](https://openairdocs.org/ad/70-08-02): Tail Rotor Drive Shaft · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Jan 1, 1971 - [AD 67-26-04](https://openairdocs.org/ad/67-26-04): Altimeters · Bell Helicopter Textron Canada 206A, 150G, 172H (USAF T-41A) and 36 more - [AD 65-04-01](https://openairdocs.org/ad/65-04-01): Freewheeling Clutch · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Feb 17, 1965 - [AD 62-27-02](https://openairdocs.org/ad/62-27-02): Wood Tail Rotor Blades · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Jan 29, 1963 - [AD 62-23-02](https://openairdocs.org/ad/62-23-02): Main Rotor Mast Thrust Bearing · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Oct 29, 1962 - [AD 61-22-01](https://openairdocs.org/ad/61-22-01): Pitch Link Rod End Bearing · Scotts-Bell 47 47, 47B, 47B3 and 21 more. Effective Nov 7, 1961 - [AD 59-05-01](https://openairdocs.org/ad/59-05-01): Tail Rotor Blade Inspection · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 58-26-02](https://openairdocs.org/ad/58-26-02): M-S MA4-5AA Carburetor · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 57-08-01](https://openairdocs.org/ad/57-08-01): Tail Rotor Drive Shafts · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 57-07-02](https://openairdocs.org/ad/57-07-02): Rotor Hub Equalizer Link · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 56-25-02](https://openairdocs.org/ad/56-25-02): Tail Rotor Pitch Bearings · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 56-15-02](https://openairdocs.org/ad/56-15-02): Swashplate Control Ring · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 56-05-01](https://openairdocs.org/ad/56-05-01): Tail Rotor Drive Shafts · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 55-16-01](https://openairdocs.org/ad/55-16-01): Tail Rotor Hub Fillet · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 52-28-03](https://openairdocs.org/ad/52-28-03): Tail Rotor Gearbox Shaft · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 52-21-01](https://openairdocs.org/ad/52-21-01): Lord Mount Guards · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 52-05-03](https://openairdocs.org/ad/52-05-03): Engine Mount Safety Strap · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 52-01-06](https://openairdocs.org/ad/52-01-06): Tail Boom Spoiler · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 51-27-01](https://openairdocs.org/ad/51-27-01): Engine Mount Replacement · Scotts-Bell 47 47, 47B, 47B3 and 21 more - [AD 48-13-02](https://openairdocs.org/ad/48-13-02): Fuel Pump Rocker Pin · Scotts-Bell 47 47, 47B, 47B3 and 21 more ### Matched by engine (Lycoming TVO-435-GIA) None in force. ### Historical (superseded or no longer in force) - [AD 2021-23-13](https://openairdocs.org/ad/2021-23-13) (historical): Ground Proximity System · Airbus Helicopters K-225, K-190A, K-240 and 237 more. Effective Dec 9, 2021 - [AD 2000-18-51](https://openairdocs.org/ad/2000-18-51) (historical): Main Rotor Blade Grip · Bell Helicopter Textron 47B, 47B3, 47D and 19 more. Effective Nov 30, 2000 - [AD 86-06-08 R1](https://openairdocs.org/ad/86-06-08-R1) (historical): Main Rotor Blade Grips · Bell Helicopter Textron 47B, 47B3, 47D and 25 more. Effective Jul 10, 1987 ## Information bulletins (advisory) None matched. ## NTSB investigations None matched to N47PD. ## FAA accident and incident reports None matched to N47PD. ## Service difficulty reports None filed for this aircraft. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. ## STCs that may be installed (OpenAirDocs) (142, first 50) Approved for this aircraft's airframe or engine model, in force first, then newest. The registry doesn't record which STCs an aircraft has; its records do. ### Approved for the airframe (Bell 47G-3B-1) - [STC SA800EA](https://openairdocs.org/stc/SA800EA): Installation of Whelen Anti-Collision, Position, or Anti-Collision/Position Light System, and applicable associated power supplies. Whelen Aerospace Technologies - [STC SH100WE](https://openairdocs.org/stc/SH100WE): Installation of fiberglass baggage carriers. Texas Transland LLC - [STC SH3319NM](https://openairdocs.org/stc/SH3319NM): Installation of Precise Flight Pulselite Control Unit in the Landing /Taxi Recognition Visual Control Light system,. Precise Flight Inc - [STC SH1152NW](https://openairdocs.org/stc/SH1152NW): Installation of the Automatic Flagman Model 135 Control Stick Grip. Air Products & Parts LLC - [STC SR09066RC](https://openairdocs.org/stc/SR09066RC): Fabricate the HAC-47-3 Tail Rotor Blade. Scott's-Bell 47 Inc - [STC SR02704SE](https://openairdocs.org/stc/SR02704SE): Installation and maintenance of the Sunspot 36 and 46 series lights. AeroLED's Holdings LLC - [STC SA02268CH](https://openairdocs.org/stc/SA02268CH): Installation of Airwolf Filter Corp. Air Oil Separator. Airwolf Filter Corporation - [STC SH2772SW](https://openairdocs.org/stc/SH2772SW): Revise mast controls and remove stabilizer bar and install control system. Scott's-Bell 47 Inc - [STC SA615EA](https://openairdocs.org/stc/SA615EA): Installation of a Whelen Anti-Collision Strobe Light System as replacement for originally installed anti-collision lights. Whelen Aerospace Technologies - [STC SR00359BO](https://openairdocs.org/stc/SR00359BO): Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. Whelen Aerospace Technologies - [STC SR01845SE](https://openairdocs.org/stc/SR01845SE): Installation of a barrier air filtration system. Cascade Flying Service LLC - [STC SR00408NY](https://openairdocs.org/stc/SR00408NY): Installation of Airwolf remote mounted engine oil filter model AFC-600. Airwolf Filter Corporation - [STC SR02487AK](https://openairdocs.org/stc/SR02487AK): Installation of L-3 Communications Avionics Systems ESI-500 Standby Instrument System. ADS-B Technologies, LLC - [STC SH2348SW](https://openairdocs.org/stc/SH2348SW): Installation of Sprag System Kit P/N 74-612-153-1M Revision D, dated 9/17/14. Scott's Bell 47 Inc - [STC SR02394AK](https://openairdocs.org/stc/SR02394AK): Replacement of existing landing and/or hover light bulbs with Light Emitting Diode (LED) lighting system. Seaplanes North LLC - [STC SH166GL](https://openairdocs.org/stc/SH166GL): Installation of Low Fuel Warning System. Scott's Bell 47 Inc - [STC SH1710GL](https://openairdocs.org/stc/SH1710GL): Install fixed elevator in lieu of synchronized elevator. Scott's Bell 47 Inc - [STC SH2397SW](https://openairdocs.org/stc/SH2397SW): Installation of Ag-King 500B Spray System with 2 tanks (800 pounds total allowable), 32 foot boom on end of skid tubes and engine driven pump. Scott's Bell 47 Inc - [STC SH279SW](https://openairdocs.org/stc/SH279SW): Modification of dual control cyclic stick into quick removable stick similar to Bell 47A stick by cutting off the stick and making an insert of 4130 steel tube to fit inside. Scott's Bell 47 Inc - [STC SH382SW](https://openairdocs.org/stc/SH382SW): Eligible only on Bell 47 series with open tail booms. Installation of sign per Kitz Kopter's Drawing KK-101 dated 10/14/64. Scott's Bell 47 Inc - [STC SH504GL](https://openairdocs.org/stc/SH504GL): Installation of Lycoming VO-435-A1F engine modified. Scott's Bell 47 Inc - [STC SH605GL](https://openairdocs.org/stc/SH605GL): Removal of Avco Lycoming TV0-435-B1B Engine, Turbocharger, and related parts; and the installation. Scott's Bell 47 Inc - [STC SH972SW](https://openairdocs.org/stc/SH972SW): Installation of copilot's rudder pedals. Scott's Bell 47 Inc - [STC SR09321RC](https://openairdocs.org/stc/SR09321RC): Installation of Improved Main Rotor Grips and Matching Adapter Nut. Scott's Bell 47 Inc - [STC SR09346RC](https://openairdocs.org/stc/SR09346RC): Installation of main rotor blade grip with modified root radius and matching adapter in accordance with Helicopter Tech, Inc., Drawing List R47-120-252-1000, Revision IR, dated May 15, 2002, or later Federal Aviation Administration (FAA) approved revision. Helicopter Tech Inc - [STC SA00068SE](https://openairdocs.org/stc/SA00068SE): Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1). Electronics International Inc - [STC SA2693NM](https://openairdocs.org/stc/SA2693NM): Installation of Electronics International digital volt/amp gauges and accessories. Electronics International Inc - [STC SA4172NM](https://openairdocs.org/stc/SA4172NM): Installation of Aviation Development oil filter. Aviation Development Corporation - [STC SH657NW](https://openairdocs.org/stc/SH657NW): Installation of Allison 250-C18A, -C18C, -C20, -C20B engine and related changes. Siam Hiller Holdings Inc - [STC SA02033AT](https://openairdocs.org/stc/SA02033AT): Modification to install an air-oil separator to prevent oil from being aspirated from the engine breather line. M-20 Oil Separators LLC - [STC SA00680SE](https://openairdocs.org/stc/SA00680SE): Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. Electronics International - [STC SR01430LA](https://openairdocs.org/stc/SR01430LA): Installation of Stainless Steel Skid shoes. Papas Gary Los Angeles Laboratories Inc - [STC SA01258SE](https://openairdocs.org/stc/SA01258SE): Installation of the Automatic Flagman Dispenser Models in accordance with Automatic Flagman Master Drawing Lists specified in attached AML, or later FAA approved revision.This STC supercedes several existing STC s as listed in the notes on the attached AML. R-S Sales Inc - [STC SA489EA](https://openairdocs.org/stc/SA489EA): Installation of ARP Inc. carburetor ice detection system. Aircraft & Rotorcraft Products (ARP) Inc - [STC SH1343SO](https://openairdocs.org/stc/SH1343SO): Installation of Utah Research& Development's Model 124BC101 airborne battery charger. Aviall Services, Inc. Lists 47 Series - [STC SA02520AT](https://openairdocs.org/stc/SA02520AT): Installation of M-20 Oil Separator, model 600-WP. M-20 Oil Separators LLC - [STC SH102WE](https://openairdocs.org/stc/SH102WE): Installation of automatic flagman model 5. R-S Sales Inc - [STC SA2687NM](https://openairdocs.org/stc/SA2687NM): Installation of Truboplus/ Electronics Int'l gauges and switches. Aero Manufacturing Inc - [STC SH12CE](https://openairdocs.org/stc/SH12CE): Replace existing engine induction air filter with AC Spark Plug Filter. Brackett Aero Filters Inc - [STC SR00849LA](https://openairdocs.org/stc/SR00849LA): Installation of a hand control device for anti-torque pedals. Chap J - [STC SR00641SE](https://openairdocs.org/stc/SR00641SE): Installation of aerial mapping camera. Davis Richard B - [STC SA00238SE](https://openairdocs.org/stc/SA00238SE): Installation of Aviation Development Corporation's sump mounted chip detector. Aviation Development Corporation - [STC SH54WE](https://openairdocs.org/stc/SH54WE): Installation of modified hydraulic boost cylinder. Fortner Accessory Service Corp - [STC SH68WE](https://openairdocs.org/stc/SH68WE): Installation of modified hydraulic boost cylinder. Fortner Accessory Service Corp - [STC SA1626NM PAGE 1](https://openairdocs.org/stc/SA1626NM%20PAGE%201): Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series). Electronics International - [STC SH8441SW](https://openairdocs.org/stc/SH8441SW): Installation of a float assembly. Aero Products, Inc - [STC SA2844CE](https://openairdocs.org/stc/SA2844CE): Installation of a plastic cap enclosure over the anti-collision strobe light system. Air Transport Inc - [STC SH5142NM](https://openairdocs.org/stc/SH5142NM): Install rotary atomizers, Simplex model 10060, on Simplex spray booms approved under on the the STC's SH787NW, SH856NW, SH889NW, or SH891NW. Simplex Manufacturing Company - [STC SA2350NM PAGE 1](https://openairdocs.org/stc/SA2350NM%20PAGE%201): Installation of Electronics International Inc digital carburetor/outside air temperature gauges. Electronics International - [STC SH370GL](https://openairdocs.org/stc/SH370GL): Installation of Facet Enterprises, Inc. engine lubrication system scavenge filter. Facet Filter Products All 142: https://openairdocs.org/aircraft/N47PD/stcs.md ## Earlier aircraft with N47PD The FAA can reassign an N-number once a registration is cancelled. These aircraft carried N47PD before. - [Cancelled 2013-03-22](https://openairdocs.org/deregistered/N47PD-2013-03-22): Drone Paul E PULSAR III, S/N P97070536, built 2001. Second renewal notice. Owner: [Drone Paul E](https://openairdocs.org/faa-owner/DRONE%20PAUL%20E), [Carmi, IL](https://openairdocs.org/faa-place/IL/Carmi) ## Related - Other Bell 47G-3B-1 aircraft: https://openairdocs.org/model/bell-47g-3b-1/aircraft.md - The Lycoming TVO-435-GIA engine: https://openairdocs.org/engine/lycoming-tvo-435-gia.md --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.