# N58BA: 1957 Hiller UH-12D

- Status: Valid registration
- Airframe: [Hiller UH-12D](https://openairdocs.org/model/hiller-uh-12d) (registry code 4360118, 4 seats)
- Engine: [Lycoming VO-435 series](https://openairdocs.org/engine/lycoming-vo-435-series) (registry code 41525)
- Data sheets: [TCDS 4H10](https://openairdocs.org/tcds/4H10) (Siam Hiller Holdings Inc.), [TCDS E-279](https://openairdocs.org/tcds/E-279) (Lycoming Engines) (OpenAirDocs)
- Serial number: 969
- Year built: 1957
- Type: Rotorcraft
- Engine type: Turbo-shaft
- Airworthiness: Multiple
- Airworthiness date: January 5, 1976
- Certificate issued: February 6, 2018
- Expires: February 29, 2028
- Mode S code: A773A9
- Registered owner: [Bank Of Utah Trustee](https://openairdocs.org/faa-owner/BANK%20OF%20UTAH%20TRUSTEE)
- Location: [Salt Lake City, UT](https://openairdocs.org/faa-place/UT/Salt%20Lake%20City)
- Owner type: Corporation
- Owner's area on the map: 40.7558° N, 111.8843° W: Placed by OpenAirDocs at the center of ZIP code 84111, within about a mile (OpenAirDocs). The owner's mailing address, not where the aircraft is based
- FAA registry: https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=58BA
- Page: https://openairdocs.org/aircraft/N58BA

From the FAA registry file of October 22, 2026. ADs below are matched by the registry's airframe and engine model codes. They may apply; each AD's applicability can narrow it by serial number, part number or installed equipment. This is not a compliance determination. The registry lists only the engine series, so ADs for every Lycoming VO-435 model are included.

## ADs that may apply (OpenAirDocs): 48 in force

### Matched by airframe (Hiller UH-12D)

- [AD 2015-20-51](https://openairdocs.org/ad/2015-20-51): Hiller UH-12, UH-12A, UH-12B and 6 more
- [AD 2000-24-21](https://openairdocs.org/ad/2000-24-21): Control System Linkage · Hiller UH-12, UH-12A, UH-12B and 6 more. Effective Jan 10, 2001
- [AD 97-20-15](https://openairdocs.org/ad/97-20-15): Outboard Tension-Torsion Bar Pin · Hiller UH-12A, UH-12B, UH-12C and 2 more. Effective Nov 12, 1997
- [AD 97-10-16](https://openairdocs.org/ad/97-10-16): Blade Spar Tube and Cuff Inspection · Allison 250-C20/250-C20B engine (Siam Hiller Holdings STC SH177WE or SH178WE). Effective Jun 27, 1997
- [AD 86-22-04](https://openairdocs.org/ad/86-22-04): Main Rotor Blades · Hiller UH-12D, UH-12E and UH-12E-L with STC SH177WE or SH178WE. Effective Nov 3, 1986
- [AD 86-17-02](https://openairdocs.org/ad/86-17-02): Main Rotor Blade Fork · Hiller UH-12D, UH-12E and UH-12E-L with STC SH177WE or SH178WE. Effective Aug 22, 1986
- [AD 84-19-08](https://openairdocs.org/ad/84-19-08): Engine Mount · Hiller UH-12D, UH-12E and UH-12E-L with STC SH177WE or SH178WE. Effective Sep 20, 1984
- [AD 83-25-02](https://openairdocs.org/ad/83-25-02): Main Rotor Blade Doublers · Allison 250-C20/250-C20B engine (Siam Hiller Holdings STC SH177WE). Effective Dec 29, 1983
- [AD 82-15-02](https://openairdocs.org/ad/82-15-02): Main And Tail Rotors · Hiller UH-12D, UH-12L, UH-12L4 and 2 more. Effective Jul 16, 1982
- [AD 81-18-02](https://openairdocs.org/ad/81-18-02): Tail Rotor Skin Cracks · Hiller UH-12, UH-12A, UH-12B and 6 more. Effective Sep 10, 1981
- [AD 81-17-03](https://openairdocs.org/ad/81-17-03): Main Transmission · Hiller UH-12, UH-12A, UH-12B and 6 more. Effective Aug 24, 1981
- [AD 81-17-01](https://openairdocs.org/ad/81-17-01): Starting Vibrator Assemblies · Bendix Starting Vibrator Assemblies, B-2, B-2A and 49 more. Effective Aug 13, 1981
- [AD 81-09-08](https://openairdocs.org/ad/81-09-08): Main Rotor Blade · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE. Effective Jun 25, 1981
- [AD 81-04-01](https://openairdocs.org/ad/81-04-01): Rudder Cable Assembly · Hiller UH-12D, UH-12L and UH-12E. Effective Feb 9, 1981
- [AD 80-23-02](https://openairdocs.org/ad/80-23-02): Turbine Power Conversions · Allison 250-C20/250-C20B engine (Siam Hiller Holdings STC SH177WE or 2 others). Effective Nov 20, 1980
- [AD 80-19-02](https://openairdocs.org/ad/80-19-02): Turbine Power - Soloy Conversions · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE. Effective Oct 11, 1980
- [AD 80-07-04](https://openairdocs.org/ad/80-07-04): Main Rotor Blade Anti-Node Bars · Hiller UH-12, UH-12D and UH-12E. Effective Mar 31, 1980
- [AD 79-03-07](https://openairdocs.org/ad/79-03-07): Main Rotor Tachometer Generator · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE. Effective Feb 21, 1979
- [AD 78-23-07](https://openairdocs.org/ad/78-23-07): Finite Life Components Listed in AD · Hiller UH-12D and UH-12E. Effective Dec 14, 1978
- [AD 78-22-08](https://openairdocs.org/ad/78-22-08): Flight/Engine Control · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE. Effective Nov 30, 1978
- [AD 78-22-02](https://openairdocs.org/ad/78-22-02): Rotor Blade Retention System · Hiller UH-12D and UH-12E. Effective Oct 27, 1978
- [AD 78-18-03](https://openairdocs.org/ad/78-18-03): Drive Shaft · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE. Effective Oct 6, 1978
- [AD 77-24-03](https://openairdocs.org/ad/77-24-03): Fuel Control Valve · Hiller UH-12C, UH-12D, UH-12L and 3 more. Effective Jan 6, 1978
- [AD 75-10-01](https://openairdocs.org/ad/75-10-01): Rotor Drive System · Hiller UH-12D, UH-12L, UH-12L4 and 2 more. Effective May 8, 1975
- [AD 61-05-04](https://openairdocs.org/ad/61-05-04): Main Transmission · Hiller UH-12D and UH-12E. Effective Jun 4, 1974
- [AD 74-04-03](https://openairdocs.org/ad/74-04-03): Main Rotor Drag Struts · Hiller UH-12D and UH-12E. Effective Feb 18, 1974
- [AD 73-25-03](https://openairdocs.org/ad/73-25-03): Finite Life Components · Hiller UH-12D. Effective Jan 10, 1974
- [AD 73-20-03](https://openairdocs.org/ad/73-20-03): Main Rotor Hub · Hiller UH-12, UH-12A, UH-12B and 4 more. Effective Oct 30, 1973
- [AD 71-25-08](https://openairdocs.org/ad/71-25-08): Inspect Main Rotor Blades · Hiller UH-12, UH-12A, UH-12B and 6 more. Effective Dec 14, 1971
- [AD 69-13-07](https://openairdocs.org/ad/69-13-07): Collective Yoke Support Brackets · Hiller UH-12D, UH-12L, UH-12L4 and 2 more. Effective Apr 30, 1970
- [AD 69-08-08](https://openairdocs.org/ad/69-08-08): Tail Rotor Yoke · Hiller UH-12D, UH-12L, UH-12L4 and 2 more. Effective Apr 23, 1969
- [AD 67-08-03](https://openairdocs.org/ad/67-08-03): Cyclic Control Bracket · Hiller UH-12D and UH-12E. Effective Mar 9, 1967
- [AD 66-22-04](https://openairdocs.org/ad/66-22-04): Mercury Clutches · Hiller UH-12D, UH-12L, UH-12L4 and 2 more. Effective Sep 2, 1966
- [AD 76-20-06](https://openairdocs.org/ad/76-20-06): Cable Freezing Control · Hiller UH-12D and UH-12E with STC SH177WE or SH178WE
- [AD 63-21-03](https://openairdocs.org/ad/63-21-03): Main Rotor Blades · Hiller UH-12D and UH-12E
- [AD 62-06-03](https://openairdocs.org/ad/62-06-03): Transmission & Lubrication System Modification · Hiller UH-12D and UH-12E
- [AD 59-25-03](https://openairdocs.org/ad/59-25-03): Wobble Plate Screws · Hiller UH-12, UH-12A, UH-12B and 3 more
- [AD 59-05-05](https://openairdocs.org/ad/59-05-05): Cyclic Control Scissor Casting · Hiller UH-12, UH-12A, UH-12B and 3 more
- [AD 58-02-03](https://openairdocs.org/ad/58-02-03): Carburetor Mixture Control Removal · Hiller UH-12, UH-12A, UH-12B and 2 more

### Matched by engine (Lycoming VO-435 series)

- [AD 2026-04-11](https://openairdocs.org/ad/2026-04-11): Engine (Reciprocating) · Lycoming Engines AEIO-320-D1B, AEIO-320-D2B, AEIO-320-E1A and 605 more. Effective Apr 8, 2026
- [AD 2022-16-03](https://openairdocs.org/ad/2022-16-03): Engine (RECIPROCATING) · Continental Aerospace Technologies GTSIO-520-C, GTSIO-520-D, GTSIO-520-F and 236 more. Effective Aug 15, 2022
- [AD 2012-03-07](https://openairdocs.org/ad/2012-03-07): Carburetor · Lycoming Engines GO-435, GO-435-C2 (O-435-17), GO-435-C2A and 389 more. Effective Mar 27, 2012
- [AD 2004-10-14](https://openairdocs.org/ad/2004-10-14): Crankshaft gear · Lycoming Engines AEIO-320-D1B, AEIO-320-D2B, AEIO-320-E1A and 642 more. Effective Jun 25, 2004
- [AD 90-04-06 R1](https://openairdocs.org/ad/90-04-06-R1): Propeller Governor External Oil Line · Lycoming Engines AEIO-320-D1B, AEIO-320-D2B, AEIO-320-E1A and 427 more. Effective May 28, 1991
- [AD 80-04-04 R1](https://openairdocs.org/ad/80-04-04-R1): Crankshaft Flange Bolts · Lycoming Engines IVO-540-A1A, TIVO-540-A2A, TVO-435-A1A and 38 more. Effective Aug 18, 1980
- [AD 69-24-03](https://openairdocs.org/ad/69-24-03): Carburetors · Continental Motors A-65-1, A-65-12, A-65-12F and 321 more. Effective Nov 29, 1969
- [AD 66-06-03](https://openairdocs.org/ad/66-06-03): Connecting Rod Assemblies · Lycoming Engines GO-435-C2 (O-435-17), GO-435-C2A, GO-435-C2A2 and 317 more. Effective Jan 16, 1969
- [AD 68-08-08](https://openairdocs.org/ad/68-08-08): Hydraulic Valve · Lycoming Engines IGSO-480-A1A6, IGSO-480-A1B6, IGSO-480-A1C6 and 44 more. Effective May 19, 1968

### Historical (superseded or no longer in force)

- [AD 77-07-05 R1](https://openairdocs.org/ad/77-07-05-R1) (historical): Control Rotor Blade Spar Tube and Cuff · Hiller UH-12, UH-12A, UH-12B and 3 more. Effective Jun 20, 1977
- [AD 77-07-05](https://openairdocs.org/ad/77-07-05) (historical): Control Rotor Blade Spar Tube and Cuff · Hiller UH-12, UH-12A, UH-12B and 3 more. Effective Jun 20, 1977
- [AD 2024-21-02](https://openairdocs.org/ad/2024-21-02) (historical): Engine (Reciprocating) · Lycoming Engines AEIO-320-D1B, AEIO-320-D2B, AEIO-320-E1A and 548 more. Effective Dec 5, 2024

## Information bulletins (advisory) (2 in force)

- [SAIB NE-19-08](https://openairdocs.org/saib/NE-19-08): Reciprocating Engine Cylinder Section - Lycoming Engines Parallel Valve Cylinders. Issued May 2, 2019
- [SAIB NE-14-13](https://openairdocs.org/saib/NE-14-13): Reciprocating Engine - Cylinder Mounting Studs. Issued Mar 24, 2014

## NTSB investigations

None matched to N58BA.

## FAA accident and incident reports (1)

From the FAA Accident/Incident Data System. Reports are matched to registry aircraft by N-number and event date, checked against the reported make and model; the registry's history has gaps, so older matches can be wrong. Compare the reported make and model.

- [Incident 19851105064379I](https://openairdocs.org/incident/19851105064379I), Nov 5, 1985: Hiller UH12D (N58BA), North Bend, OR, Minor damage. On liftoff, an empty seed sack stored under a truck blew into the tail rotor. Skid knocked off on aborted takeoff.

## Service difficulty reports (1)

As reported by operators and repair stations. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.

- [SDR 96ZZZX3237](https://openairdocs.org/sdr/96ZZZX3237), Apr 30, 1996: HUB. CRACKED. WHILE C/W AD 73-20-03 10/30/73, DYE PEN AND VISUAL INSPECTION OF M/R HUB, A CRACK WAS FOUND ABOUT .75 INCHES LONG. M/R HUB WAS REMOVED AND SCRAPPED AND A SERVIC

## STCs that may be installed (OpenAirDocs) (64, first 50)

Approved for this aircraft's airframe or engine model, in force first, then newest. The registry doesn't record which STCs an aircraft has; its records do.

### Approved for the airframe (Hiller UH-12D)

- [STC SH3319NM](https://openairdocs.org/stc/SH3319NM): Installation of Precise Flight Pulselite Control Unit in the Landing /Taxi Recognition Visual Control Light system,. Precise Flight Inc
- [STC SR02704SE](https://openairdocs.org/stc/SR02704SE): Installation and maintenance of the Sunspot 36 and 46 series lights. AeroLED's Holdings LLC
- [STC SR00359BO](https://openairdocs.org/stc/SR00359BO): Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. Whelen Aerospace Technologies
- [STC SR00420NY](https://openairdocs.org/stc/SR00420NY): Installation of Airwolf remote mounted engine oil filter Model AFC-600. Airwolf Filter, Corp
- [STC SR02487AK](https://openairdocs.org/stc/SR02487AK): Installation of L-3 Communications Avionics Systems ESI-500 Standby Instrument System. ADS-B Technologies, LLC
- [STC SR02470AK](https://openairdocs.org/stc/SR02470AK): Installation of the L-3 Communications NGT -1000/2000/2500 ADS-B System. ADS-B Technologies, LLC
- [STC SR02471AK](https://openairdocs.org/stc/SR02471AK): Installation of the L-3 Communications NGT -9000/9000R ADS-B System. ADS-B Technologies, LLC
- [STC SR02394AK](https://openairdocs.org/stc/SR02394AK): Replacement of existing landing and/or hover light bulbs with Light Emitting Diode (LED) lighting system. Seaplanes North LLC
- [STC SA00068SE](https://openairdocs.org/stc/SA00068SE): Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1). Electronics International Inc
- [STC SA2693NM](https://openairdocs.org/stc/SA2693NM): Installation of Electronics International digital volt/amp gauges and accessories. Electronics International Inc
- [STC SA02033AT](https://openairdocs.org/stc/SA02033AT): Modification to install an air-oil separator to prevent oil from being aspirated from the engine breather line. M-20 Oil Separators LLC
- [STC SH247NW](https://openairdocs.org/stc/SH247NW): Installation and maintenance of exhaust ejector engine oil cooler system. (UH-12D (ARMY UH-23D modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH295NW](https://openairdocs.org/stc/SH295NW): Installation of Hiller auxiliary fuel tanks kit No 72041. (UH-12D (ARMY UH-23D) modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH297NW](https://openairdocs.org/stc/SH297NW): Installation and maintenance of a cabin heater system. (UH-12D (ARMY UH-23D modified per STC SH178WE). Siam Hiller Holdings Inc
- [STC SH299NW](https://openairdocs.org/stc/SH299NW): Installation of Soloy cargo racks. Siam Hiller Holdings Inc
- [STC SH321NW](https://openairdocs.org/stc/SH321NW): Installation of a Bendix fuel control/power governor system on the Allison 250-C20 turbine powered Hiller UH-12D rotorcraft. (UH-12D (ARMY UH-23D) modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH338NW](https://openairdocs.org/stc/SH338NW): Installation of transmission oil cooling system on the Allison250-C20 turbine powered Hiller UH-12D rotorcraft. (UH-12D (ARMY UH-23D modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH380NW](https://openairdocs.org/stc/SH380NW): Installation and maintenance of engine auto reignition system. (UH-12D (ARMY UH-23D) modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH505NW](https://openairdocs.org/stc/SH505NW): Installation of cargo release pedal. Siam Hiller Holdings Inc
- [STC SH559NW](https://openairdocs.org/stc/SH559NW): Installation and maintenance of engine inlet air cleaner system. (UH-12D (ARMY UH-23D) modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SA00680SE](https://openairdocs.org/stc/SA00680SE): Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. Electronics International
- [STC SH177WE](https://openairdocs.org/stc/SH177WE): Installation of Allison 250-C20/250-C20B engine and related changes. Siam Hiller Holdings Inc
- [STC SH287NW](https://openairdocs.org/stc/SH287NW): Installation of Hiller landing gear float kit No. 44012. (UH-12d (ARMY UH-23D modified per STC SH177WE). Siam Hiller Holdings Inc
- [STC SH475NW](https://openairdocs.org/stc/SH475NW): Installation of an agricultural spray system. (UH-12D (ARMY UH-23D) modifier per STC). Siam Hiller Holdings Inc
- [STC SR01430LA](https://openairdocs.org/stc/SR01430LA): Installation of Stainless Steel Skid shoes. Papas Gary Los Angeles Laboratories Inc
- [STC SA01258SE](https://openairdocs.org/stc/SA01258SE): Installation of the Automatic Flagman Dispenser Models in accordance with Automatic Flagman Master Drawing Lists specified in attached AML, or later FAA approved revision.This STC supercedes several existing STC s as listed in the notes on the attached AML. R-S Sales Inc
- [STC SA02520AT](https://openairdocs.org/stc/SA02520AT): Installation of M-20 Oil Separator, model 600-WP. M-20 Oil Separators LLC
- [STC SH849NW](https://openairdocs.org/stc/SH849NW): Installation of North American Industries, Inc., Model No. 5 Automatic Flagman. R-S Sales Inc
- [STC SA2687NM](https://openairdocs.org/stc/SA2687NM): Installation of Truboplus/ Electronics Int'l gauges and switches. Aero Manufacturing Inc
- [STC SR00135LA](https://openairdocs.org/stc/SR00135LA): Installation of Yehnert Tail Rotor Blades YH-278 as replacements for Hiller Tail Rotor Blades 55073. Yehnert Helicopters, Inc
- [STC SA1626NM PAGE 1](https://openairdocs.org/stc/SA1626NM%20PAGE%201): Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series). Electronics International
- [STC SA2350NM PAGE 1](https://openairdocs.org/stc/SA2350NM%20PAGE%201): Installation of Electronics International Inc digital carburetor/outside air temperature gauges. Electronics International
- [STC SH359GL](https://openairdocs.org/stc/SH359GL): Installation of Facet Enterprises engine lubrication system scavenge filter. Facet Filter Products
- [STC SH2763SO](https://openairdocs.org/stc/SH2763SO): Installation of control rotor safety cable. JAARS Inc
- [STC SA4302NM](https://openairdocs.org/stc/SA4302NM): Installation of Electronics Int'l digital automatic engine analyzer. Electronics International
- [STC SA3862NM PAGE 1](https://openairdocs.org/stc/SA3862NM%20PAGE%201): Installation of Electronics International Primary TIT/EGT/CHT instruments, remote switches and associated accessories. Electronics International
- [STC SH3362NM](https://openairdocs.org/stc/SH3362NM): Installation of a Tail Rotor Blade Protective Coating. Columbia Helicopters Inc
- [STC SA2190NM PAGE 1](https://openairdocs.org/stc/SA2190NM%20PAGE%201): Installation of electronics International Digital Volt/Amp Gauges and Accessories. Electronics International
- [STC SH618NW](https://openairdocs.org/stc/SH618NW): Installation of the Onboard Weighing System Adapter No. 1500, for use with Eastern Rotorcraft Cargo Hook No 2A15E. Onboard Weighing Systems
- [STC SH877SO](https://openairdocs.org/stc/SH877SO): Installation of tail rotor guard assembly. Jungle Aviation & Radio Service, Inc
- [STC SA2350NM](https://openairdocs.org/stc/SA2350NM) (historical): Installation of Electronics International Inc digital carburetor/outside air temperature gauges listed on the attached continuation sheet and the associated accessories. Electronics International

### Approved for the engine (Lycoming VO-435 series)

- [STC SE2932SW](https://openairdocs.org/stc/SE2932SW): Install carburetor air temperature indicator. Approved for Aircooled Motors (Franklin Engine Co.) equipped with float carburetors. Model eligibility included here may not be inclusive. Alcor LLC
- [STC SE01954SE](https://openairdocs.org/stc/SE01954SE): Installation of engine crankcase seal. Ly-Con Rebuilding Company. Lists VO-435-A1A
- [STC SE01966WI](https://openairdocs.org/stc/SE01966WI): Use of GAMI G100UL High Octane Unleaded Avgas in spark ignition piston aircraft engines. General Aviation Modifications Inc. Lists VO-435-B1A
- [STC SE8628SW](https://openairdocs.org/stc/SE8628SW): Installation of oil nozzles for lubrication of cam and filters. Cygnet Aerospace Corp. Lists VO-435-A1A (O-435-21)
- [STC SE4408SW](https://openairdocs.org/stc/SE4408SW): Miscellaneous engine cylinder replacement parts. Continental Motors, Inc
- [STC SE7504SW](https://openairdocs.org/stc/SE7504SW): Installation of any or all parts listed on Airmotive Engineering Drawing List No. 852-1, Rev. 1, dated 10/4/88, or later FAA approved revision. Continental Motors, Inc
- [STC SE7665SW](https://openairdocs.org/stc/SE7665SW): Installation of parts listed on Airmotive List No. 8810-3, Rev 6. Continental Motors, Inc
- [STC SE8776SW](https://openairdocs.org/stc/SE8776SW): Installation of coated cylinders and piston rings. Continental Motors, Inc
- [STC SE2902NM](https://openairdocs.org/stc/SE2902NM): Lycoming valve cover gasket. Real Gaskets Tennessee. Lists VO-435-A1A (O-435-21)

All 64: https://openairdocs.org/aircraft/N58BA/stcs.md

## Related

- Other Hiller UH-12D aircraft: https://openairdocs.org/model/hiller-uh-12d/aircraft.md
- The Lycoming VO-435 series engine: https://openairdocs.org/engine/lycoming-vo-435-series.md

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.