Actions | Compliance | Procedures |
| (1) Inspect fuselage frame No. XI for any cracks. | Before further flight after February 24, 2006 (the effective date of this AD). Thereafter, repetitively inspect every 20 hours time-in-service (TIS) until you do the installation of reinforcement modifications for fuselage frame No. XI required by paragraph (e)(2)(ii) of this AD. | Follow Polskie Zaklady Lotnicze Sp. zo.o. Bulletin No. E/62.018/2005, dated November 30, 2005. |
| (2) If you find any cracks in fuselage frame No. XI as a result of any inspection required by paragraph (e)(1) of this AD, you must: (i) Remove and replace any cracked fuselage frame No. XI; and (ii) Do the installation of reinforcement modifications for fuselage frame No. XI. | Before further after the inspection required by paragraph (e)(1) of this AD. The installation of reinforcement modifications required by paragraph (e)(2)(ii) of this AD is the terminating action for the repetitive inspection requirements of paragraph (e)(1) of this AD. | Follow Polskie Zaklady Lotnicze Sp. zo.o. Bulletin No. E/62.018/2005, dated November 30, 2005. |
| (3) Do not install any fuselage frame No. XI without also the reinforcement modifications required by paragraph (e)(2)(i) of this Ad. | As of February 24, 2006 (the effective date of this AD). | Follow Polskie Zaklady Lotnicze Sp. zo.o. Bulletin No. E/62.018/2005, dated November 30, 2005. |