Labor cost | Parts cost | Total cost per airplane | Total cost on U.S. operators |
| 2 workhours x $60 per hour = $120 | $70. | $190 per airplane | $475,000. |
Actions | Compliance | Procedures |
| (1) Visually inspect the fuel line nipple and elbow located between the carburetor and gascolator for cracks or misalignment, and replace as necessary. | Inspect within the next 25 ours time-in-service (TIS) after September 13, 2002 (the effective date of this AD) and replace prior to further flight after the inspection. You must inspect even if you have inspected previously. | In accordance with Univair Service Bulletin No. 24B, dated January 29, 2002. |
| (2) Replace any aluminum fuel line nipple with one made of brass or steel. | Within the next 25 TIS after September 13, 2002 (the effective date of this AD), unless already accomplished (compliance with AD 86-22-09 and/or Univair Service Bulletin No. 24A, dated August 22, 1986). | In accordance with Univair Service Bulletin No. 24B, dated January 29, 2002. |
| (3) Replace any aluminum fuel elbow fitting with one made of brass or steel. Manufacturer replacement parts numbers are referenced in the service information. | Within the next 25 hours TIS after September 13, 2002 (the effective date of this AD), unless already accomplished (compliance with AD 46-38-03). | In accordance with Univair Service Bulletin No. 24B, dated January 29, 2002. |
| (4) Inspect for the existence of double support tubes on the gascolator and install these tubes if they do not exist, as follows: (i) For all affected airplanes except for (Forney) F-1 and (Forney) F-1A airplanes, install part numbers 48076 and 48096 (or FAA-approved equivalent part numbers) double support tubes; and (ii) For all affected (Forney) F-1 and (Forney) F1-A airplanes, install part numbers 48098 and 48099 (or FAA-approved equivalent part numbers) double support tubes. | Inspect within the next 25 hours TIS after September 13, 2002 (the effective date of this AD) and install the double support tubes prior to further flight after the inspection, unless already accomplished (compliance with Univair Service Bulletin No. 24A, dated August 22, 1986). | In accordance with Univair Service Bulletin No. 24B, dated January 29, 2002. |
| (5) Do not install, on any affected airplane, an aluminum fuel line nipple or aluminum elbow. | As of September 13, 2002 (the effective date of this AD). | Not Applicable. |
| (6) Do not install a gascolator on the side of the carburetor on any affected airplane, unless the double support tubes specified in paragraph (d)(4)(i) or (d)(4)(ii) of this AD are installed. | As of September 13, 2002 (the effective date of this AD). | Not Applicable. |