# NTSB WPR19LA088: Lancair IV, N549CJ, Laramie, WY, February 10, 2019

- Type: NTSB accident investigation
- Classification: Accident · No injuries · Class 3 · Limited · Final report
- Date: February 10, 2019, 16:00 local (23:00 UTC)
- Place: Laramie, WY
- Coordinates: 41.287498, -105.60749 (estimated)
- Nearby events: https://openairdocs.org/map.md?lat=41.2875&lon=-105.6075&mi=10
- Phase of flight: [Enroute](https://openairdocs.org/ntsb-phases/400) (OpenAirDocs' grouping)
- Defining event: [Enroute-climb to cruise: Aircraft structural failure](https://openairdocs.org/ntsb-events/337)
- Highest injury: No injuries
- Injuries: 2 uninjured
- Status: Completed
- Report: Approved by Office Director
- Investigation class: Class 3
- NTSB office: Western Pacific Region
- Parties: Federal Aviation Administration
- NTSB case key (mKey): 99026
- NTSB case page: https://web.ntsb.gov/investigations/?ntsbnumber=WPR19LA088
- NTSB report (PDF, downloads): https://data.ntsb.gov/carol-repgen/api/Aviation/ReportMain/GenerateNewestReport/99026/pdf
- NTSB docket: https://data.ntsb.gov/Docket?ProjectID=99026
- Page: https://openairdocs.org/ntsb/WPR19LA088

## Probable cause

An environmental stress cracking failure of the acrylic windshield, which resulted in a rapid decompression during cruise flight.

## Findings

NTSB's coded findings; those marked are part of the probable cause.

- [Windows-windshield system](https://openairdocs.org/ntsb-findings/01035600): Aircraft › Aircraft structures · Failure (probable cause); cases with it: [Carl Franklin Lipe LANCAIR 4-P, 1 case](https://openairdocs.org/ntsb-findings/01035600/cases.md?model=05633FK), [All aircraft, 13 cases](https://openairdocs.org/ntsb-findings/01035600/cases.md)

## Sequence of events

The events NTSB coded, in order, by phase of flight. The defining event best describes what happened.

- [Enroute-climb to cruise: Aircraft structural failure](https://openairdocs.org/ntsb-events/337) (defining event); cases with it: [Carl Franklin Lipe LANCAIR 4-P, 1 case](https://openairdocs.org/ntsb-events/337/sequence.md?model=05633FK), [All aircraft, 290 cases](https://openairdocs.org/ntsb-events/337/sequence.md)

## Analysis

The pilot reported that, during cruise flight at 15,500 feet mean sea level in the pressurized airplane, he heard a loud “bang” as the windscreen fractured. The pilot diverted to a nearby airport, where he landed the airplane uneventfully. An examination of the windshield pieces revealed that the fracture origin area displayed features consistent with a preexisting crack that developed due to environmental stress cracking (ESC). ESC is a fracture mechanism in polymer materials that occurs when a susceptible polymer material is exposed to a combination of tensile stress and exposure to a substance that degrades the integrity of the material. The ESC was likely a result of contact with a degrading substance, the origin of which could not be determined. Although a stress analysis of the windscreen structure was not completed, the location of the fracture origin was likely an area of high stress on the windscreen due to the curvature at that location. Sustained high stress in acrylic can promote crack development, particularly when the acrylic is also exposed to certain chemical agents. The overall appearance of the windscreen edge showed limited visual evidence of adhesive on the surface, suggesting a relatively low bond strength between the windscreen at the frame. Evidence of voids in the epoxy at the interior bond surface were observed; if portions of the windscreen became disbonded, this could have affected the stress state of the windscreen and contributed to increased stress at the fracture origin area.

## Factual narrative

On February 10, 2019, about 1600 mountain standard time, a Lancair IV-P airplane, N549CJ, sustained substantial damage when it was involved in an accident near Laramie, Wyoming. The pilot and passenger were not injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight. The pilot reported that, following departure, he configured the airplane to climb to 15,500 feet mean sea level (msl). The airplane reached that altitude and was cruising about 235 kts when the pilot heard a loud “bang,” as the windscreen suddenly blew out of the airframe. The pilot reduced the airplane’s speed and lowered the landing gear in an effort to stabilize the airplane. He diverted to Laramie and made an uneventful landing. The windshield was manufactured from cast acrylic and the frame was from a carbon fiber reinforced polymer (CFRP) with layers of carbon-fiber fabric and epoxy. According to the window installation instructions, the exterior surface of the windshield is bonded in position with Hysol paste epoxy structural adhesive. Recovered portions of the windshield pieces were sent to the National Transportation Safety Board (NTSB) for examination. (see Figure 1.) The outer edge of the windshield displayed a white appearance consistent with a roughening process used during the windshield installation process before bonding to the windshield frame. Figure 1: Overall view of the submitted windshield pieces. Unlabeled arrows indicate fracture propagation directions. Most of the windshield fractures exhibited fracture planes that varied across the thickness with curving hackles turning toward the interior or exterior surface, features consistent with fracture under a combination of tension and bending loads. One fracture (shown as “A”) displayed smooth, mirror-like fracture features along most of the fracture surface in a flat plane perpendicular to the interior and exterior surfaces consistent with fracture under primarily tension loads. A portion of that fracture surface had curving rib marks and with a somewhat hazy surface, consistent with preexisting progressive crack growth. The features were consistent with the crack’s origin positioned at the forward left side of the windshield above the edge of the frame. The surface adjacent to the fracture appeared disturbed consistent with a surface scratch. The origin area fracture displayed features consistent with a preexisting crack that developed due to environmental stress cracking (ESC). ESC is a fracture mechanism in polymer materials that occurs when a susceptible polymer material is exposed to a combination of tensile stress and exposure to a substance that degrades the integrity of the material. At high magnification, the crack surface had fracture features that were significantly different than features observed in laboratory-created impact fracture surfaces. The examination further revealed liquid oozing from secondary cracks. The liquid was identified as aplasticizer, a chemical that could cause ESC in acrylic. The source of the plasticizer was unknown, but potential sources include flexible polymers such as vinyl tape potentially used in the construction of the windshield or possible contact with a vinyl material if that material had been used in the airplane interior. Plasticizers can exude from the adjacent material due to changes in temperature or humidity, mechanical stress, or weathering. The windshield edge showed limited visual evidence of adhesive on the bond surface, with evidence of voids in the epoxy at the interior bond surface.

## Aircraft

- Registration: [N549CJ](https://openairdocs.org/aircraft/N549CJ), registered now, S/N 218, built 2014 (OpenAirDocs)
- Reported make and model: Lancair IV (P)
- Registry model: [Carl Franklin Lipe LANCAIR 4-P](https://openairdocs.org/model/carl-franklin-lipe-lancair-4-p) (registry code 05633FK) (OpenAirDocs)
- Registry engine: [Continental TSIO-550-E](https://openairdocs.org/engine/continental-tsio-550-e) (registry code 17247, reciprocating) (OpenAirDocs)
- Category: Airplane, amateur-built
- Serial number: 218
- Year built: 2014
- Airframe hours: 307
- Engines: Continental TSIO-550-E 350 horsepower reciprocating
- Damage: Substantial damage
- Flight: Personal, Part 91
- Airworthiness certificate: Special, Experimental (Special)
- Last inspection: Condition, March 1, 2018, 91 hours before
- Departed: CPR, Casper, WY
- Destination: FTG, Denver, CO
- Airport: LAR, Laramie Regional
- Equipment: Electronic multifunction display, Auto-pilot, Angle of attack indicator, Stall warning system, Onboard weather, Electronic primary flight display

## Flight crew

As NTSB recorded them. NTSB leaves out names.

- Pilot; age 62; injuries: none; commercial; airplane ratings: multi-engine land, single-engine land; instrument ratings: airplane; medical: class 3, with waivers/limitations; seat: left; restraint: 3-point; flight hours: 2,700 total, 400 in this make and model

## Weather

- Conditions: Visual (VMC), Day
- Wind: 150° at 24 knots, gusting 34
- Visibility: 10 statute miles
- Lowest ceiling: none
- Temperature: 28 °F, dew point 12 °F
- Altimeter: 29.63 inHg
- Observed at: KLAR, 4 nm away

## FAA reports on this event (1)

The FAA's own accident and incident reports, matched to the aircraft by N-number and date (OpenAirDocs).

- [Accident 20190210010109A](https://openairdocs.org/incident/20190210010109A), Feb 10, 2019: Carl Franklin Lipe LANCAIR 4-P, Laramie, WY, Substantial damage. Windshield blew out of aircraft during cruise flight

## Docket (2 files)

The files NTSB released with the investigation on April 12, 2022, on NTSB's docket system: https://data.ntsb.gov/Docket?ProjectID=99026. 12.5 MB in all.

- Materials laboratory factual report 20-011 (item 1, PDF, 15 pages, 23 photos, 7.1 MB): https://data.ntsb.gov/Docket/Document/docBLOB?ID=9401367&FileExtension=pdf&FileName=20-011-Rel.pdf
- Pilot/operator aircraft accident report, NTSB form 6120.1 (item 2, PDF, 8 pages, 5.3 MB): https://data.ntsb.gov/Docket/Document/docBLOB?ID=11765398&FileExtension=pdf&FileName=Z%20-%20Attachment%2001%20-%206120_Redacted-Rel.pdf

From the NTSB's public API. Aircraft are matched to registry aircraft by N-number and event date, checked against the reported serial number, make and model; the registry's history has gaps, so older matches can be wrong. Compare the reported make and model.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
