# Proposed AD FAA-2023-2149: GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Engines

- Type: Proposed airworthiness directive (not in force)
- Status: Became AD 2024-03-05
- Products: GE Aviation Czech s.r.o.
- Product type: Aircraft
- Action: Notice of proposed rulemaking (NPRM).
- Published: November 14, 2023, 88 FR 77918
- Comments due: December 29, 2023
- Became: [AD 2024-03-05](https://openairdocs.org/ad/2024-03-05)
- Docket: FAA-2023-2149 (https://www.regulations.gov/docket/FAA-2023-2149, where comments are filed)
- Project: MCAI-2023-00136-E
- FR document: 2023-24639
- Official PDF: https://openairdocs.org/files/sha256/77/b8/77b88fe95b2ee5d84c26d3c8c26958483f9eb4e5875ea040cc9e0061b42a348b (from https://www.govinfo.gov/content/pkg/FR-2023-11-14/pdf/2023-24639.pdf)
- Federal Register: https://www.federalregister.gov/documents/2023/11/14/2023-24639/airworthiness-directives-ge-aviation-czech-sro-type-certificate-previously-held-by-walter-engines-as
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/FR-ADNPRM-2023-24639-00000000000.0001
- Page: https://openairdocs.org/proposed/FAA-2023-2149

## Summary

The FAA proposes to supersede Airworthiness Directive (AD) 2022-13-16, which applies to all GE Aviation Czech s.r.o. (GEAC) (type certificate previously held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Model M601D-11 engines; and AD 2022-14-12, which applies to certain GEAC Model M601D-11, M601E-11, M601E-11A, M601E-11AS, M601E- 11S, and M601F engines. AD 2022-13-16 requires revising the airworthiness limitations section (ALS) of the existing engine maintenance manual (EMM) to incorporate a visual inspection of the centrifugal compressor case for cracks. AD 2022-14-12 requires replacing the propeller shaft for Model M601F engines. AD 2022-14-12 also requires calculating the accumulated life of the propeller shaft and replacing the propeller shaft, if necessary, for model M601D-11, M601E-11, M601E-11A, M601E-11AS, and M601E-11S engines. Since the FAA issued AD 2022-13-16 and AD 2022-14-12, the manufacturer revised the ALS of the existing EMM to introduce new and more restrictive tasks and limitations, expand the applicability to all Model M601 engines, and incorporate certain requirements addressed by AD 2021-13-07 and AD 2023-01-10, which prompted this proposed AD. This proposed AD would require revising the ALS of the existing EMM and the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new and more restrictive tasks and limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

## Notices in this docket

- Nov 14, 2023: Notice of proposed rulemaking (NPRM). (first notice), FR document 2023-24639, comments due Dec 29, 2023 (https://www.federalregister.gov/documents/2023/11/14/2023-24639/airworthiness-directives-ge-aviation-czech-sro-type-certificate-previously-held-by-walter-engines-as)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.