# SDR QXEA2008112001177

- Type: Service difficulty report (as reported; unverified)
- Difficulty date: November 8, 2008
- Submitted: November 20, 2008
- Operation: Air carrier
- Aircraft: N617QX
- Make and model: Cndair CL6002C10
- Aircraft serial: 10130
- Aircraft time: 13,831 hours, 9,912 cycles
- System (JASC): [5315 · Fuselage Main, Floor Beam](https://openairdocs.org/jasc/5315)
- Part: Floorbeam
- Condition: Cracked
- Location: Bs 280
- Stage of operation: IN
- How discovered: 9
- Nature of condition: O
- Precautionary procedure: K
- FAA source: FAA Service Difficulty Reporting System (https://sdrs.faa.gov/)
- Page: https://openairdocs.org/sdr/QXEA2008112001177

## Discrepancy

PDX - C3 - FS 280 CROSSBEAM HAS 1 INCH CRACK ON THE TOP RT SIDE, 3 INCHES OUTBOARD OF THE RT LONGITUDINAL BEAM AND A 1.5 INCH CRACK ON THE FWD SIDE AT THE RT LONGITUDINAL BEAM ATTACHMENT.  REMOVED RT SIDE OF BEAM IAW SRM 51-42-06.  REMOVED INTERCOSTALS AT RBL36 AND RBL 18 AND DRIP TRAY.  LOCATED DRILLED AND DEBURRED NEW RT 280 BEAM, SPLICE PLATES AND CAMLOCK CHANNEL IAW REO 670-53-11-047 AND SRM 51-42-06.  INSTALLED RT 280 BEAM WITH SOLID RIVETS REF REO 670-53-11-047 AND 51-42-06.  INSTALLED SPLICE PLATE IAW REO 670-53-11-047.  INSTALLED OUTBOARD INTERCOSTAL REF SRM 51-42-21.  INSTALLED CAMLOCK CHANNEL AND DRIP TRAY IAW SRM 51-42-06 AND 51-42-13.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
