# SDR QXEA2010090700517

- Type: Service difficulty report (as reported; unverified)
- Difficulty date: September 2, 2010
- Submitted: September 7, 2010
- Operation: Air carrier
- Aircraft: N616QX
- Make and model: Cndair CL6002C10
- Aircraft serial: 10128
- Aircraft time: 18,356 hours, 13,502 cycles
- System (JASC): [5315 · Fuselage Main, Floor Beam](https://openairdocs.org/jasc/5315)
- Part: Floorbeam
- Condition: Corroded
- Location: Bs 280
- Stage of operation: IN
- How discovered: 9
- Nature of condition: O
- Precautionary procedure: K
- FAA source: FAA Service Difficulty Reporting System (https://sdrs.faa.gov/)
- Page: https://openairdocs.org/sdr/QXEA2010090700517

## Discrepancy

C-CHECK - COCKPIT FLOOR SUPPORT ANGLE ON FWD SIDE OF FS 280 BEAM SHOWS SIGNS OF CORROSION.  REMOVED CORRODED FLOOR SUPPORT ANGLE FOR ACCESS IAW SRM 51-42-06-001-001-A01.  BLENDED CORROSION IAW SRM 51-21-06-001-001-A01. ORIGINAL THICKNESS IS .063". BLENDED .015" MATERIAL FROM ANGLE MAXIMUM BLEND ALLOWED IS .048".  FOUND BLEND TO BE OUT OF LIMITS IAW SRM 53-21-43-101-001-A01.  LOCATED NEW FASTENER HOLES IN NEW ANGLE IAW SRM 51-40-11-001-001-A01.  INSTALLED ANGLE IAW SRM 51-42-21-001-001-A01 AND 51-23-02-001-001-A01.  TOPCOATED AND APPLIED CORROSION INHIBITING COMPOUND IAW SRM 51-25-16-001-001-A01 AND 51-21-11-001-001-A01.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
