# SDR SWAA2021111528898

- Type: Service difficulty report (as reported; unverified)
- Difficulty date: October 11, 2021
- Submitted: November 15, 2021
- Operation: Air carrier
- Aircraft: N788SA
- Make and model: Boeing 737*
- Aircraft serial: 30603
- Aircraft time: 68,361 hours, 40,407 cycles
- System (JASC): [5320 · Fuselage Miscellaneous Structure](https://openairdocs.org/jasc/5320)
- Part: Stiffener
- Part number: 148A24885
- Condition: Corroded
- Location: Fuselage
- Stage of operation: IN
- How discovered: 9
- Nature of condition: O
- Precautionary procedure: K
- FAA source: FAA Service Difficulty Reporting System (https://sdrs.faa.gov/)
- Page: https://openairdocs.org/sdr/SWAA2021111528898

## Discrepancy

CORROSION ON B.S. 1088; R.B.L. 27; W.L. 252. APU INLET CUT OUT UPPER FLANGE. ; / [01] REMOVED CORROSION ON APU INLET CUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 : AREA 2' X 1' X .020' IAW SRM 51-10-02-0G-0. FOUND TO BE OUT OF LIMITS DUE TO NO ALLOWABLE DAMAGE IN SRM; IT'LL BE REAPIRABLE BY REPLACEMENT IAW SRM 51-10-02-0G-0 STEP 9.C.; [02] REMOVED APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02.; [03] VERIFIED CORRECTIVE ACTION STEPS 1 AND 2.; [04] LOCATED AND DRILLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-05 ; OK TO INSTALL; [05] VERIFIED CORRECTIVE ACTION 4; [06] INSTALLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02 AND DWG # 148A0924; [07] PART USAGE INFO; [08] VERIFIED INSTALLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02 AND DWG # 148A0924

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
