# AAI Alert Service Bulletin AA-08055: Revision B, from page 13

- Rights: © AAI. Filed by the FAA in regulations.gov docket FAA-2012-0502, the docket of AD 2012-22-06. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [AAI Alert Service Bulletin AA-08055](https://openairdocs.org/service-documents/aai/aa08055.md)
- Title as filed: Aeronautical Accessories, Inc. - Alert Service Bulletin
- Pages: 16
- PDF: https://openairdocs.org/files/sha256/12/f0/12f09bf5cb5bbd3c5109fb6584acff19c1156690b7f035677beb3255c8cf436c
- Page: https://openairdocs.org/service-documents/aai/aa08055/file/12f09bf5cb5b

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 13 (OCR)

205A, 205A-1, 205B, 212  ALERT SERVICE BULLETIN  ASB No. AA-08055
412, 412EP, 412CF  HIGH FORWARD CROSSTUBE  Revision B
AB412, AB412EP
UH-1B, UH-1H,
SW204, SW205
E.3 Inspection
1. Inspect crosstube using fluorescent penetrant method per ASTM E1417, Type I,
Method B, C, or D, Level 2, in accordance with Bell Helicopter Standard
Practices Manual (BHT-ALL-SPM). Refer to BHT-ALL-SPM for fluorescent
penetrant inspection procedures.
2. Damage limits are specified in Instructions for Continued Airworthiness, report
number AA-01136 and the applicable model Bell Helicopter Maintenance
Manual.
E.4 Repair
1. Repair damage within repairable limits in accordance with Instructions for
Continued Airworthiness report number AA-01136.
2. Refinish crosstube by applying MIL-PRF-85582 primer and MIL-PRF-85285 paint
(or equivalent) per manufacturer instructions to the stripped areas. The areas to
be inspected per Part B should be masked to omit MIL-PRF-85285 paint as
shown in Figure 1. Paint inspection areas with MIL-PRF-85285 Type I Gloss
Clear coat as described in Part B of this bulletin.
E.S  Assembly Instructions
1. Assemble both Crosstube Clamp Assemblies in accordance with Instructions for
Continued Airworthiness report number AA-01136.
2. Install Crosstube Assembly to aircraft in accordance with Instructions for
Continued Airworthiness report number AA-01136.
3. Annotate aircraft records to indicate that Part E of this bulletin has been
accomplished; and return aircraft to service.
PART F  TOWING AIRCRAFT
Helicopter towing operations must be conducted in accordance with applicable
model Bell Helicopter Maintenance Manual. Manufacturer towing requirements are
applicable to any aircraft being towed with weight on gear. This includes towing
aircraft with ground handling wheels installed and aircraft resting on moveable
platforms.
CAUTION
Failure to follow manufacturer towing instructions may
result in crosstube damage and/or failure.
AERONAUTICAL ACCESSORIES, INC.
August 12, 2009  Page 13 of 16

### Page 14 (OCR)

205A, 205A-1, 205B, 212  ALERT SERVICE BULLETIN  ASB No. AA-08055
412, 412EP, 412CF  HIGH FORWARD CROSSTUBE  Revision B
AB412, AB412EP
UH-1B, UH-1H,
SW204, SW205
40  - 2.5}  13.970
13.940
212-321-103 FORWARD CROSSTUBE ASSEMBLY
SYMMETRY
ARC LENGTH  CLEARCOAT / INSPECTION AREA
2.00  LEFT SIDE AND RIGHT SIDE OF TUBE
605-005-121 DECAL  45°
40
VIEW D-D  VIEW E-E
FIGURE 1 - CLEAR COAT AND INSPECTION AREA
(NOT TO SCALE)
AERONAUTICAL ACCESSORIES, INC.
August 12, 2009  Page 14 of 16

### Page 15 (OCR)

205A, 205A-1, 205B, 212  ALERT SERVICE BULLETIN  ASB No. AA-08055
412, 412EP, 412CF  HIGH FORWARD CROSSTUBE  Revision B
AB412, AB412EP
UH-1B, UH-1H,
SW204, SW205
WEIGHT REMOVED
• PLUMBLINE
57.0 TO 59.0 IN (1447.8 TO 1498.6 mm)  57.0 TO 59.0 IN (1447.8 TO 1488.6 mm)
- 118.0 INCHES MAX.
(2997.2 mm)
Checking landing gear crosstube deflection
Forward Crosstube (High)  MIN  MAX
Part Number  Model Effectivity  in.  mm  in.  mm
212-321-103  205A, 205A-1, 205B, 212, 412,  57.00  1448  59.00  1499
412EP, 412CF, AB412, AB412EP,
UH-1B, UH-1H, SW204, SW205
FIGURE 2 - HIGH LANDING GEAR DEFLECTION LIMITS
REMOVE PAINT/PRIMER
FROM CROSSTUBE, BOTH SIDES
- HIGH FWD
CROSSTUBE
B.L.
0.0
FIGURE 3 - PAINT REMOVAL AREA
AERONAUTICAL ACCESSORIES, INC.
August 12, 2009  Page 15 of 16

### Page 16 (OCR)

205A, 205A-1, 205B, 212  ALERT SERVICE BULLETIN  ASB No. AA-08055
412, 412EP, 412CF  HIGH FORWARD CROSSTUBE  Revision B
AB412, AB412EP
UH-1B, UH-1H,
SW204, SW205
REASON  FOR  REMOVAL
REMOVAL DATA  COMPONENT  CYCLES SINCE  REMAINING TO  RETIREMENT
REMOVED AT  A/C HOURS  ACCUMULATED  TAKE-OFF / LANDINGS
HISTORICAL SERVICE RECORD  FWD CROSSTUBE ASSEMBLY  SERVICE LIFE (TAKE-OFF/LANDINGS)  COMPONENT  CYCLES SINCE  DATE  NEW  TIME/DATE
INSTALLATION DATA  INSTALLED ON BY (ACTIVITY) INSTALLED AT  A/C HOURS  REMAINING TO  ACCUMULATED  TAKE-OFF / LANDINGS  RETIREMENT
Component Name:  Part Number:  Serial Number:  A/C NUMBER  TIME/DATE
FIGURE 4 - HISTORICAL SERVICE RECORD
AERONAUTICAL ACCESSORIES, INC.
August 12, 2009  Page 16 of 16

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
