# ACSS Service Bulletin 7517900-34-6042

Copy: No revision named ("U.S. DOT/FAA - Service Information - 2"), 34 pages: PDF https://openairdocs.org/files/sha256/c2/c7/c2c78aa35a0b620596296be4126be5b884576de0be7849d80b201b12accdc6d9; text https://openairdocs.org/service-documents/acss/sb-7517900-34-6042/file/c2c78aa35a0b.md. Rights: © Aviation Communication & Surveillance Systems, LLC. Filed by the FAA in regulations.gov docket FAA-2010-1204; AD 2012-02-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [ACSS](https://openairdocs.org/service-documents/acss.md)
- Type: Service bulletin (Service Bulletin)
- Number: 7517900-34-6042
- Page: https://openairdocs.org/service-documents/acss/sb-7517900-34-6042

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2012-02-08](https://openairdocs.org/ad/2012-02-08.md), effective Mar 13, 2012: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/acss/sb-7517900-34-6042/proposed.md).

## Text (34 pages)

Rights: © Aviation Communication & Surveillance Systems, LLC. Filed by the FAA in regulations.gov docket FAA-2010-1204; AD 2012-02-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ACSS®
& hales Companations
Service Bulletin
Transmittal Information
ACSS Publication Number 8008236-001
ATA Service Bulletin 7517900-34-6042
NAVIGATION - TRAFFIC ALERT AND COLLISION AVOIDANCE SYSTEM -
TCAS 2000 COMPUTER - MASS (Military Airborne Surveillance System) Part
No. 7517900-20001, -20002, -65001, and -65002 . Updates TCAS 2000
MT-950 / MT-951 (MASS) Computer Units to Related Part No. 7517900-20004
or -65004. Installs New TCAS Operational Software, Part No. 9000221-006 to
Incorporate Updates to Interference Limiting Functionality with Altitude
Correction.
INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR) NOTICE
This technical data is controlled under the International Traffic in Arms Regulations (ITAR) and may not be
exported to a Foreign Person, either in the U.S. or abroad, without a license or exemption from the U.S.
Department of State.
LEGAL NOTICE
This document and the information disclosed herein are proprietary data of Aviation Communication and
Surveillance Systems, LLC. Neither this document nor the information contained herein shall be reproduced,
used, or disclosed to others without the written authorization of Aviation Communication and Surveillance
Systems, LLC.
This document is being furnished in confidence by Aviation Communication and Surveillance Systems, LLC. The
information disclosed herein falls within exemption (b) (4), Freedom of Information Act, (5 USC 552), and the
prohibitions of the Disclosure of Confidential Information Generally (18 USC 1905).
Implementation of this software update described in this Service Bulletin involves changes to software. The
software required to effect this update is copyrighted by ACSS. License to use this software to perform the
modifications set forth in this Service Bulletin shall be granted by ACSS in accordance with terms and conditions
to be entered into between ACSS and the customer.
SUMMARY
This Service Bulletin gives instructions for the installation of new TCAS 2000 Product Software, Part
No. 9000221-006. Installation of this new Operational Software converts TCAS 2000 MT-950 / MT-
951 (MASS) Computer Units as shown below:
Unit Part No. Before Modification  Unit Part No. After Modification
7517900 -20001, -20002  to  7517900-20004
7517900 -65001, -65002  to  7517900 -65004
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 1 of 34

### Page 2 (OCR)

ACSS®
& Thales Company  cations
Service Bulletin
SUMMARY (Cont.)
Refer to Section 1.C on Page 5 for a list of the changes that are a part of new TCAS Product
Software, Part No. 9000221-006.
NOTE: The work described in this Service Bulletin can be completed on board the aircraft or on a
TCAS 2000 Manual Test Station (MTS).
NOTE: Refer to Section 2.C, Table 4 on Page 13 for parts availability.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 2 of 34

### Page 3 (OCR)

ACSS®
& Thales Company ons
Service Bulletin
REVISION HISTORY
Revisions to ATA Service Bulletin No. 7517900-34-6042 (ACSS Pub. No. 8008236-001) are
summarized in Table 2 below.
Table 1. Transmittal Of Service Bulletin Revisions
Revision  Date of Release
Initial Release  May 27, 2010
Revision 01  October 15, 2010
Revision 02  February 1, 2011
Revision 03  June 30, 2011
NOTE: This Service Bulletin obeys ASD-STE100 Simplified Technical English guidelines and ATA
ISpec2200 specifications, wherever practicable.
Table 2. Revisions Summary
Revision  Page  Change Made
01  VAR  Made minor changes to comply with current ACSS documentation
guidelines.
VAR  Modified text to make sure a Service Center with a TCAS 2000
Manual Test Station can install software. Per ECR 012706.
VAR  Removed Section L, "Documents Necessary to Complete This
Bulletin." This information is available in other sections of the Service
Bulletin or in the "Testing and Fault Isolation" section of the
Component Maintenance Manual (CMM). Removed other references
to test procedures/software that is included in the CMM. Referred
operators to the CMM. Per ECR 012706.
12  Updated Part Availability information.
02  1  Added ITAR statement
03  VAR  Added Part No. -20004 or -65004. Replace OP Software Part No.
9000221-004 with new Part No. 9000221-006.
4, 7  Added Part No. -20002 and -65002 to list of effectivity.
5  Updated Sections 1.C to include information about the altitude input.
9, 12  Updated Section 2.A and 2.B for pricing information.
13  Updated Table 4 to include new labels for new dash numbers.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 3 of 34

### Page 4 (OCR)

ACSS®  A hales Companati
Service Bulletin
Revision  Page  Change Made
03 (cont)  27  Updated Table 7 to include new software.
13, 34  Table 4 and Figure 8 replaced Software Tear-off Label with new
Software Overlay Label
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 4 of 34

### Page 5 (OCR)

ACSS®  Ta sommunicatio
Service Bulletin
1. PLANNING INFORMATION
A. Effectivity
Service Bulletin 8008236-001 (Pub. No. 7517900-34-6042) is applicable to TCAS 2000 MT-
950 / MT-951 Computer Unit (CU), Part No. 7517900-20001, -20002, -65001, and
-65002.
B. Concurrent Requirements
If a TCAS 2000 Manual Test Station (MTS) is used to load the operational software, one of
the Service Bulletins that follow must be done before or in conjunction with this Bulletin:
• ATE Bulletin Pub. No. 8008085-001 (ATA Service Bulletin No. 7517900-34-6038) for a
PC with Windows NT operating system
or
• ATE Bulletin Pub. No. 8008370-001 (ATA Service Bulletin No. 7517900-34-6044) for a
PC with Windows XP operating system.
C. Reason
New Operational Software, Part No. 9000221-006, incorporates updates to the Interference
Limiting functionality. These updates improve tracking of nearby Mode-S intruders in high
density environments. Customers upgrading from older software versions of TCAS will also
gain the benefit of minor changes that have been incorporated into later software releases.
These changes include minor improvements to the internal built-in-test operation to reduce
nuisance faults and improve overall reliability as well as minor enhancements to input/output
signal processing to improve interoperability with other avionic systems.
This update also includes a correction to an issue on some installations whereby the TCAS
does not go into STBY mode (TCAS OFF) when the active transponder senses an altitude
mis-compare between 2 Gillham altitude inputs or other possible air data failures. This
potential issue is dependent on the altitude interface to the transponder and the transponder
used. The following helps describe systems with or without the potential issue:
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 5 of 34

### Page 6 (OCR)

ACSS
& Thales company tons
Service Bulletin
Mode S Transponder  Altitude Interface to  Potential Issue
the Transponder
ACSS Part No. 7517800 with any dash  Gillham or ARINC 429  No
number
ACSS Part No. 7519350 with any dash  Gillham or ARINC  No
number  429
ACSS Part No. 7510700-850, -951, -  ARINC 429  No
952, -953
ACSS Part No 7510700-850, -951, -  Gillham  Yes
952, -953
Other Manufacturer's Mode S  Check with test  Any
Transponders  shown below.
TEST: To check for possible system issue, check for system response while
powered up and valid, then simulate invalid primary altitude to the active
transponder by pulling that altitude source's circuit breaker. The TCAS
display should change to TCAS OFF or TCAS FAIL (the exact annunciation
is dependent on the type of transponder and display involved - either
indication is acceptable as it indicates that the TCAS is no longer functional
in this situation).
This Service Bulletin updates the TCAS 2000 MT-950 / MT-951 (MASS) CUs from Part No.
7517900-20001, -20002, -65001, or -65002 to related Part No. 7517900-20004 and -65004.
D. Description
This Service Bulletin gives instructions for installing new Operational Software on board the
aircraft or by final Acceptance Test on a TCAS 2000 Manual Test Station (MTS).
This Service Bulletin also includes instructions for installing a new software tear-off label on
the front of the unit to identify the new dash number.
NOTE: Some units have Product Identification labels made of metalized polyester
material. New tear-off labels are all made with white polyester. A mixture of
materials on an updated Product Identification Label is permitted.
When this software modification is done at an ACSS-Authorized Service Center, new ACSS
labels can be installed, if necessary.
E. Compliance
This Service Bulletin is highly recommended because it has an effect on aircraft safety. This
Service Bulletin has been written in support of a potential FAA Airworthiness Directive. Do
this conversion as soon as possible. The FAA Airworthiness Directive will identify the
compliance schedule.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 6 of 34

### Page 7 (OCR)

ACSS®
& Trules Compary ons
Service Bulletin
F. Approval / Authorization Granted
The content of this Service Bulletin is reviewed and approved by the FAA.
This Service Bulletin includes the information that follows:
(1)  Gives TCAS 2000 unit modification instructions from the manufacturer.
Gives authorization for the installation and operation of the modified TCAS 2000 unit
on board the aircraft as identified below:
Aircraft Previously Equipped With...  New Approved Part Nos.
7517900-20001, -20002  to  7517900-20004
7517900-65001, -65002  to  7517900-65004
After completing this FAA-approved modification, it is the responsibility of the aircraft
operator to get "Return to Service" authorization, if necessary, from the applicable regulatory
authorities.
G. Manpower
When the modification described in this Service Bulletin is done on board the aircraft,
approximately 0.5 work hours are necessary to complete the work.
Approximately 0.5 work hours are necessary when the modification is done on a TCAS 2000
Manual Test Station (MTS). Approximately 1.0 work-hour is necessary to complete Final
Test of the unit using manual test procedures.
H. Weight and Balance
This modification does not change weight and balance.
I. Electrical Load Data
This modification does not change electrical load data.
J. Software Accomplishment Summary
Software is changed by this conversion/modification.
Work activities and procedures described in this software update meet the requirements of
RTCA Document DO-178B, Software Considerations in Airborne Systems and Equipment
Certification.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 7 of 34

### Page 8 (OCR)

ACSS®
& Thales Compary ions
Service Bulletin
K. References
(1) Reference Documents
The document identified in Table 3 is for reference only and is not necessary to
implement this Service Bulletin. Subsequent revisions to this document are permitted.
Table 3. Reference Documents
Document Number  Revision  Title
FAA Best Practices  22 Dec. 2000  Scrap or Salvageable Parts and
Document  Materials
(2) Related Service Bulletins
None
L. Other Publications Affected
As a consequence of this Service Bulletin, ACSS will revise the documents in the list that
follows:
TCAS 2000 Computer Unit Component Maintenance Manual (CMM), Pub No. A09-
3841-004 (ATA 34-43-13).
• TCAS 2000 Computer Unit, System Description and Installation Manual (SDIM), ACSS
Pub. No. A15-3841-009 (ATA 34-43-14)
The Airworthiness Analysis is not changed.
The Testing is not changed.
M. Interchangeability of Parts
This is not applicable to the changes outlined in the Service Bulletin.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 8 of 34

### Page 9 (OCR)

ACSS®
Service Bulletin
2. MATERIAL INFORMATION
A. Cost and Availability
(1) Pricing and Availability
Equipment operators  Non-Authorized Service  Centers  Availability
Free of Charge (FOC)  $1,000 USD (2011)  30 days after receipt of
order
NOTE: For additional pricing information, refer to Section 2.B, Industry Support
Information, on Page 12.
(2) Placing an Order
Use a standard Purchase Order (PO) form, or complete the ACSS Service Bulletin
Materials Order Form (OA-009) shown on Page 11. To expedite your order, include all
of the information in the list that follows:
A Purchase Order Number
Reference to this Service Bulletin:
ATA Part No. 7517900-34-6042 (ACSS Pub No. 8008236-001)
Aircraft Type
Unit Original Part Number
Unit Serial Numbers)
•  Price of modification for each unit
Part Number(s) being ordered (Refer to Table 4 on Page 13 for a list of part
numbers and order only those parts that are applicable to the unit to be updated.)
Quantity ordered
Bill-to address/instructions
Ship-to address/instructions
Freight carrier Account number and special shipping instructions
When ordering software and/or parts, send Purchase Orders to:
Aviation Communication and Surveillance Systems (ACSS)
Attn: Customer Order Administration
19810 N. 7"h Ave
Phoenix, AZ 85027-4741 USA
Phone: (623) 445-7040
Fax: (623) 445-7004
or e-mail: acss.orderadmin@L-3com.com
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 9 of 34

### Page 10 (OCR)

ACSS®
d hales comparions
Service Bulletin
NOTE:  All orders are subject to a standard lead time of 2 weeks to give sufficient
time for documentation validation and order preparation.
When sending units to an ACSS Service Center, send Purchase Orders to:
Aviation Communication and Surveillance Systems (ACSS)
Attn: Customer Order Administration
19810 N. 7th Ave
Phoenix, AZ 85027-4741 USA
Phone: (623) 445-7030
Fax: (623) 445-7002
or e-mail: acss.phxrepair@L-3com.com
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 10 of 34

### Page 11 (OCR)

ACSS®
A hales comparations
Service Bulletin
ACSS SERVICE BULLETIN
MATERIALS ORDER FORM
To secure the rights to use ACSS software, ACSS requires the completion of a Software License Agreement and Appendix. If
a current Software License Agreement exists with ACSS, the customer is only required to sign an Appendix to the Agreement
for the software being ordered. Based on the information in this order form, ACSS Order Administration will complete the
Appendix and/or the Software License Agreement and forward it to the customer for signatures.
The Software License Agreement, or Appendix, must be signed and received by ACSS prior to shipment of the order.
ALL of the following information MUST be completed for ACSS to quickly and efficiently process this software order.
Customer Name  * Customer Purchase Order Number  Date
Unit Original Part Number  Customer Contact Name  Customer Contact Email Address
A/C Type  Applicable ACSS Service Bulletin Pub. No.  Price of Modification for each Unit
Unit Serial Number(s)  Attach additional sheets as necessary to list all of the serial numbers being updated by this software order.
* This completed form can be used as the formal Purchase Order (PO) or can be used as an information sheet attached to the PO.
PARTS BEING ORDERED (as listed in the applicable Service Bulletin section, 'Material Necessary for Each Component)
Part Number  Description  Quantity
NOTE: Each Compact Flash Card/Diskette can perform an unlimited number of upgrades. Please order a minimum quantity to meet your needs.
BILL TO ADDRESS  SHIP TO ADDRESS
Freight Carrier and Account Number  Special Shipping Instructions
SUBMIT THIS ORDER TO: Aviation Communication and Surveillance Systems (ACSS), LLC
Attn: Customer Order Administration
19810 North 7"h Avenue
Phoenix, AZ 85027-4741, USA
Phone: 623.445.7040
Fax: 623.445.7004
Email: acss.orderadmin@L-3com.com
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 11 of 34

### Page 12 (OCR)

ACSS®
& rices Company ans
Service Bulletin
B. Industry Support Information
NOTE:  ACSS's on-line electronic system gives customers access to a variety of
product-related publications, including Service Bulletins and Technical
Newsletters. Go to the ACSS Customer Services web site at:
http://www.acsscustomerservices.com/CustomerServices.
(1)  Modification at an ACSS-Authorized Repair Station:
This Service Bulletin will be done at no cost (FOC) to the Operator.
Pricing for this Service Bulletin is applicable to those customers who use on-
board data loading or their own shop procedures to complete this upgrade.
If this upgrade is not installed on the aircraft, a shop Bench Test Fee is
applicable for all units sent to ACSS for this Software upgrade.
(2) Modification by an Equipment Operator:
For equipment under warranty, ACSS will reimburse the operator for the
cost of parts and labor needed to complete this Service Bulletin upon
receipt of a valid warranty claim and subject to the Terms and Conditions of
the applicable Product Support Agreement.
or
For equipment out of warranty, the Operator is responsible for the cost of
parts, and labor hours will not be reimbursed. For Cost and Availability,
refer to Section 2.A on Page 9.
(3) Modification at a Non-Authorized Service Center:
Non-Authorized Service Centers are responsible for the entire cost of the Service
Bulletin. For Cost and Availability, refer to Section 2.A on Page 9.
NOTE: 1.  A shop Bench Test Fee is applicable for those units sent to ACSS for
this Software upgrade and will be based on current catalog pricing.
NOTE: 2.  Other repairs will be quoted separately. Please speak or write to an
ACSS Customer Order Administrator and request scheduling information
before sending a unit for repair or modification.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 12 of 34

### Page 13 (OCR)

& has comparations  ACSS®
Service Bulletin
C. Material Necessary for Each Component
(1) Material to be Purchased
The items identified in Table 4 below are necessary to complete this Service
Bulletin.
Table 4. Material To Be Purchased
New  Name  Old  Qty.  Instructions/  Parts
Part Number  Part Number  Disposition  Availability
9000221-006  Operational Software  9000221-001  A/N  1,2, 3  December 2011
(3 disks)  9000221-002
9000221-004
Software Overlay Labels
TCAS 2000 SW
9000264-523
or  (-20004 6MCU units)  Overlay Label  N/A  A/N  1,2,3  Available
TCAS 2000 SW  Immediately
9000264-524  Overlay Label
(-65004 4MCU units)
A/N = As Necessary
N/A = Not Applicable
INSTRUCTIONS/DISPOSITION
1. For correct disposal of used parts, refer to FAA Best Practices document, Scrap or Salvageable
Parts and Materials, local regulatory agency, or local Repair Station policy.
2. Make sure quantities are correct and verifiable.
Include a full list of serial numbers to make sure you receive the correct identification plates.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7* Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 13 of 34

### Page 14 (OCR)

ACSS®
a hales companions
Service Bulletin
(2) Material Supplied by the Operator
WARNING
BEFORE USING A MATERIAL, REFER TO THE
MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR
SAFETY INFORMATION. SOME MATERIALS CAN BE
DANGEROUS.
CAUTION
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO
MATERIALS SPECIFIED BY ACSS. MATERIALS THAT ARE NOT
EQUIVALENT CAN CAUSE DAMAGE TO THE EQUIPMENT AND
CAN VOID ANY WARRANTY.
The items identified in Table 5 below are commercially available. Do not order
them as part of this Service Bulletin. Equivalent alternatives are permitted for
items in the table.
Table 5. Operator Supplied Material
Part/Specification Number  Qty.  Keyword
HAZARD CODE 130D  A/N  Solvent, isopropyl alcohol (99%) - Optional
source
HAZARD CODE 203B  A/N  Ink, black marking, dye-based marker. No.
33003 Marker, Action, 33 Fine.
ITW Dymon, Olathe KS (CAGE 1QZC4)
A/N = As Necessary
D. Material Necessary for Each Spare
Same as Section 2.C, Material Necessary for Each Component on Page 13.
E. Re-identified Parts
This reference is not applicable.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 14 of 34

### Page 15 (OCR)

ACSS®
& Thales Company ons
Service Bulletin
F. Tooling - Price and Availability
The items identified in Table 6 below are necessary to do the procedures in this
Bulletin. Equivalent alternatives are permitted for items in the table.
If the work described in this Service Bulletin is done on a TCAS 2000 Manual Test
Station (MTS), also refer to the TCAS 2000 Computer Unit Component and
Maintenance Manual (CMM), ACSS Pub. No. A09-3841-004 (ATA 34-43-13).
Table 6. Tooling
Product Software Loading Onboard the Aircraft
Part/Specification Number  Qty.  Description
Various  1  ARINC 615 Portable Data Loader (PDL)
(Refer to Note 2)
200F-00083  1  TCAS 2000 SW Validation Cable Adapter
Method 3-Standalone PC With TCAS Software Part Number Tool
Part/Specification Number  Qty.  Description
Operator-supplied  1  Stand-alone PC (Windows based)
9000727-002  1  TCAS Software Part Number Tool
RS-232  1  PC Interface Cable
OR
Method 4 - TCAS Software Verification Fixture
Part/Specification Number  Qty.  Description
T326948-901  1  Software Verification Fixture
(Refer to Note 1 below)
200F-00084  1  Adapter Cable
Use with Software Verification Fixture
OR
Method 5 - Remote Connected VSI/TRA
Part/Specification Number  Qty.  Description
200F-00083  1  TCAS 2000 SW Validation Cable Adapter
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7* Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 15 of 34

### Page 16 (OCR)

ACSS®
& hales company ons
Service Bulletin
NOTES:
1. The Software Verification Fixture is available from ACSS. Speak or write to an ACSS Customer
Order Administrator for more information. Refer to Section Error! Reference source not
found. on Page Error! Bookmark not defined..
2. The four portable data loaders (PDL) in the list below were tested and found to be satisfactory
for installation of TCAS operational software onboard the aircraft or on a bench system:
3.5" Floppy Drive-based Systems:
DEMO Systems - Part No. 30100 (Revision A and later versions)
• Teledyne - Part No. 2230915-01-D
• SFIM - Part No. YV68A110
Multiple Data Distribution Systems:
Teledyne Controls - Portable Maintenance Access Terminal 2000® (PMAT 2000®)
Part No. 80000-05
Other part numbers from these suppliers and ARINC 615 data loaders from other
manufacturers can complete the task successfully but ACSS cannot vouch for their usability.
3. Customers can also use an Airborne Data Loader (ADL) or Maintenance Access Terminal
(MAT) to complete this upgrade but it is their responsibility to make sure that the load works
correctly with these systems
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 16 of 34

### Page 17 (OCR)

ACSS®
& hakes Compang tons
Service Bulletin
3. ACCOMPLISHMENT INSTRUCTIONS
A. General Information
CAUTION
ALL DISASSEMBLY AND MODIFICATION PROCEDURES
MUST BE COMPLETED AT AN ANTISTATIC WORKSTATION.
REFER TO ESTABLISHED ANTISTATIC PROCEDURES.
CAUTION
THIS EQUIPMENT CONTAINS MOISTURE SENSITIVE
PARTS. SPECIAL HANDLING IS NECESSARY.
NOTE: 1.  The Paragraph, Item, Table, and/or Figure numbers referred to in this Service
Bulletin can be found in one or other of the two manuals that follow:
• TCAS 2000 Computer Unit, System Description and Installation Manual
(SDIM), ACSS Pub. No. A15-3841-009 (ATA 34-43-14)
• TCAS 2000 Computer Unit Component and Maintenance Manual
(CMM), ACSS Pub. No. A09-3841-004 (ATA 34-43-13).
NOTE: 2.  Before doing the work in this Service Bulletin, make sure you can read the
TCAS 2000 MT-950 / -951 CU software part number from a maintenance
connection.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 17 of 34

### Page 18 (OCR)

ACSS®
4a hales comparations
Service Bulletin
B. Preparation
(1) Choose an Implementation Method
Before continuing with the software upgrade, use the decision chart shown in
Figure 1 on Page 28 to choose a method for implementing the TCAS Software
upgrade.
(2)  Examine the current TCAS Product Software Part Number
Before starting this TCAS Software upgrade, use one of the Methods below to
make sure you can read the current TCAS Product Software part number and
that it is correct.
CAUTION
THE AIRCRAFT MUST HAVE GEAR DOWN AND "WEIGHT
ON WHEELS" DURING VERIFICATION OF THE PRODUCT
SOFTWARE PART NUMBER OR WHILE REPROGRAMMING
THE TCAS COMPUTER UNIT ONBOARD THE AIRCRAFT.
CAUTION
DO NOT START A TCAS SYSTEM POWER CYCLE WHILE
YOU ARE REPROGRAMMING THE COMPUTER UNIT. THIS
CAN CAUSE A PROGRAMMING FAILURE.
Method 1
Installed VSI/TRA display or EFIS System With Expanded Test Capability.
NOTE: Access to extended test mode is available only on the ground with the
transponder in standby mode.
The specific aircraft configuration must include a cockpit-initiated self-test that
starts when the operator pushes and holds the TCAS TEST switch for
8-seconds.
Use the extended test mode menu to show the System Status Page code
0000. Refer to the FAULT ISOLATION section of the TCAS 2000 System
Description and Installation Manual, ACSS Pub. No. A15-3841-009 (ATA
34-43-14).
b)  Examine the displayed software part number to make sure it is correct.
Refer to Table 7 on Page 27 for a list of correct part numbers.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 18 of 34

### Page 19 (OCR)

ACSS®
& Theles Companytion  compan
Service Bulletin
Method 2
CFDS (Central Fault Display System) or CMC (Central Maintenance Computer)
type maintenance programs.
NOTE: Fault data is available only when the aircraft is on the ground.
If the aircraft is equipped with an OMS (Onboard Maintenance System),
you can use the aircraft's CFDS or CMC to show fault information that
includes the current version of the operating software. Use the applicable
aircraft AMM (Aircraft Maintenance Manual) and refer to the OMS program.
Make sure the displayed software part number is correct. Refer to Table 7
on Page 27 for a list of correct part numbers.
Method 3
Stand-alone PC with an installed TCAS Software Part Number Tool, Part No.
9000727-002, and an RS-232 cable connection.
a)  Procure TCAS Software Part Number Tool, Part No. 9000727-002. Refer
to Table 4 on Page 13.
b)  Procure or assemble an RS-232 cable. See Figure 5 on Page 31.
c)  Stop the PC.
d)  Remove power from the TCAS 2000 CU.
e)  Connect the RS-232 cable from the PC (9-pin connector) to the J1 front
connector on the TCAS 2000 CU.
Apply power to the TCAS 2000 CU.
g)  Start the PC and Microsoft Windows operation.
h)  On the PC, go to Start => Programs => TCAS SW PN Tool and double
click "TCAS Part Number". See Figure 2 on Page 29.
i)  Examine the TCAS software part number to make sure it is correct. Refer
to Table 7 on Page 27 for a list of correct part numbers.
NOTE:  The PC S/W P/N Tool can show an "@" symbol at the end of the TCAS
software part number.
Stop the PC.
k)  Remove power from the TCAS 2000 CU.
Disconnect the RS-232 cable from the J1 front connector on TCAS 2000
Computer.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Page 19 of 34

### Page 20 (OCR)

ACSS  & Thales Company s
Service Bulletin
Method 4
TCAS Software Verification Fixture, Part No. T326948-901 and adapter cable,
Part No. 200F-00084.
For this verification option, the TCAS Computer must be energized by 115 Vac
aircraft power.
a)  Procure Software Verification Fixture, Part No. T326948-901, with related
adapter cable, Part No. 200F-00084. See Figure 3 on Page 29.
b)  Remove power to the TCAS 2000 CU.
c)  Connect the adapter cable from the TCAS 2000 CU to the Software
Verification Fixture. See Figure 3 on Page 29 for correct connection.
d)  Apply power to the TCAS 2000 CU.
e)  Push the button to start the Software Verification Fixture. Make sure that
you can read the software part number in the 15-digit display and that the
number agrees with the applicable part number in Table 7 on Page 27.
†)  Complete a TCAS system self-test and make sure that the "TCAS TEST
PASS" message comes on.
NOTE: A "TCAS TEST FAIL" message will show if power is removed from an
LRU that supplies inputs to the TCAS 2000 Computer.
If the software part number does not show on the display, repeat Steps b)
thru f) one more time. If the Part Number does not show again, use an
alternative Software Verification Method from this section.
Method 5
Software Verification with a remote VSI/TRA display only.
On some aircraft, you can use a remotely-connected VSI/TRA, Part No.
4067241-843, -844, -845, -860, -861, -862, -880, -881, -882, -890, -891, or -892,
to do a check of the software during extended test mode. Adapter cable, Part
No. 200F-00083, connects the VSI/TRA to the J1 connector on the TCAS 2000
Computer. See Figure 4 on Page 30.
NOTES:
1. The external VSI method will not work if pin RMP 12C (Honeywell BCA
EFIS output format) is grounded as part of the aircraft installation.
2. The specified aircraft configuration must include a cockpit-initiated
self-test that starts when you push the TCAS switch and hold it for 8
seconds.
3. A CMC/CFDS-initiated self-test does not let the self-test discrete stay
grounded for 8 seconds. Thus, you cannot start extended self-test from
these devices. Extended self-test is available only with some approved
TCAS control panels.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 20 of 34

### Page 21 (OCR)

ACSS®
A hales Company
Service Bulletin
a)  Push and hold the self-test button on the controller for a minimum of 8
seconds.
Make sure the software part number is correct. Refer to Table 7 on Page
27 for a list of correct part numbers.
Method 6
Applicable only when a TCAS 2000 Manual Test Station (MTS) is used. If an
upgraded TCAS 2000 MTS is used to install this upgrade, the correct
Manufacturing Test Software must be installed on the MTS.
Refer to the TESTING AND FAULT ISOLATION section of the TCAS 2000
Computer Unit Component and Maintenance Manual (CMM), ACSS Pub. No.
A09-3841-004 (ATA 34-43-13) for test procedure information.
C. Disassembly/Inspection/Removal
No disassembly necessary.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 21 of 34

### Page 22 (OCR)

ACSS®
A hales company tons
Service Bulletin
D. Modification Procedures - Onboard the Aircraft or on a Bench System
An ARINC 615 Portable Data Loader (PDL) installed on the Aircraft or Bench System
uploads new Product Software, Part No. 9000221-006 to the TCAS 2000 Computer
Unit (CU). This procedure is for cockpit systems only.
NOTE: Before doing the work in this Service Bulletin, make sure you can read the
new software part number installed in the TCAS 2000 Computer from a
maintenance connection.
(1) Procure an ARINC 615 (PDL) and the applicable interface cable. Refer to
Table 6, Tooling, on Page 15 for information on recommended PDLs.
(2)  Procure TCAS Product Software, Part No. 9000221-006.
(3) Make sure that the system inputs for AIR/GROUND (RMP-5K) and
GEAR UP/DOWN (RMP-13F) are grounded.
(4) Stop the PDL and remove power from the TCAS Computer.
(5)  Connect the cable from the PDL to the J1 front connector on the TCAS CU.
(6)  Apply power to the TCAS Computer.
Start the PDL.
(8)  Put Product Software Disk 1 into the PDL or refer to and use the applicable
instructions on the PDL.
(9)  When the PDL shows that the upload is successful, remove Disk 1 and repeat
Step (8) for Disks 2 and Disk 3.
NOTE: If the upload is not successful, contact the ACSS Customer Response
Center (CRC) at +1 (623) 445-7070 and select Option 3.
(10) Wait a minimum of 20 seconds after Disk 3 upload is complete.
(11) Stop the PDL, remove power from the TCAS CU, and disconnect the interface
cable.
(12) Complete a self-test to make sure the TCAS system is fully operational.
a) Apply power to the TCAS Computer.
b)  Push the "Push to Test" button on the front panel.
Result:
The green LED indicator on the front panel illuminates at the end of the test
cycle (approximately 8 seconds) to show that the TCAS Computer is
functional.
NOTE:  If a "TCAS TEST FAIL" message comes on, do a check to make sure all
LRUs that supply inputs to the TCAS 2000 CU are powered on.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 22 of 34

### Page 23 (OCR)

ACSS®
• haes Compa
Service Bulletin
E. Return to Service
Complete a Return-to-Service test to make sure all system parameters are fully
functional. Use the approved methods found in the TCAS 2000 System Description
and Installation Manual (SDIM), Pub. No. A15-3841-009 (ATA 34-43-14), or in the
applicable aircraft maintenance manual (AMM), or use the system self-test procedure
that follows:
(1) Short Test Mode
Push and hold the TEST button/switch on the ATC/TCAS controller to start
the test.
When the test mode becomes active, the spoken words "TCAS TEST" are
transmitted one time and the TCAS test pattern, RA indications, and a
"TCAS TEST" message will show on the applicable displays).
c)  When the test is complete (approximately 8 seconds), the TCAS system
transmits the spoken words "TCAS TEST PASS" one time and removes the
TCAS test pattern from the displays).
If the test is not successful, the spoken words "TCAS TEST FAIL" are
transmitted one time and the "TCAS FAIL" message shows on the
applicable display. Refer to the TCAS 2000 SDIM and complete a TCAS
Computer self-test to identify which LRU or subsystem is not operating
correctly.
(2)  Software Part Number Verification
Use the same Method you used in Section 3.B(2) on Page 18 to make sure the
new Operational Software Part Number displayed is 3477-LTZ-100-03.
F. Assembly
No assembly is necessary.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7t Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 23 of 34

### Page 24 (OCR)

ACSS  & Thales Company ons
Service Bulletin
G. Identification Label Update - On Board the Aircraft or On a Bench System
WARNING
WHEN HANDLING SOLVENTS, MAKE SURE THERE IS
SUFFICIENT VENTILATION IN THE WORK AREA. USE
APPLICABLE PRECAUTIONS TO PREVENT INHALATION OF
VAPORS AND EXPOSURE OF FUMES TO FLAME.
(1)  Examine the Product Identification Label and do one of the steps that follow:
(2)  Procure new ACSS Product Identification Overlay Label, Part No.
9000264-523, (6MCU) or 9000264-524 (4MCU).
NOTE: You will only need to use the software tear-off part of the label.
NOTE: Some units have Product Identification labels made of metalized
polyester material. New tear-off labels are all made with white polyester.
A mixture of materials on an updated Product Identification Label is
permitted.
(3)  Make sure that the new label shows the new software number "-XX004" and new
TSO designation, TSO C119b.
(4)  Carefully remove only the bottom (software) part of the existing LRU Product
Identification Label (do not discard).
(5)  Carefully clean the LRU software label area with isopropyl alcohol and give the
surface sufficient time to dry.
(6)  Remove only the software part of the new Product Identification Overlay Label
from its backing. Discard the top part of the label. See Figure 8 on Page 34.
Install the new software part of the Product Identification Overlay Label in the
same location as the label you removed. See Figure 6(2D barcode) Page 32 or
Figure 7 (non 2D barcode) on Page 33.
On the top part of the Product Identification label, find the TSO information. Make
sure TSO C119b is visible. Use an indelible black ink marker to fully conceal all
other TSO, JTSO, or ETSO designations.
(9) Keep the label you removed and refer to local repair station policy for correct
disposal procedures.
NOTE: Do not put a mark on or obscure the Mod Letters on the new SW Mod status
table.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7hh Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 24 of 34

### Page 25 (OCR)

ACSS®
& Thales Compare on  ompar
Service Bulletin
H. Modification Procedures - At a Service Center with a TCAS 2000 MTS
When a TCAS 2000 Manual Test Station (MTS) is used to install new Product
Software, Part No. 9000221-006, use the procedure that follows:
Complete a Final Test to make sure all system parameters are fully functional.
Refer to the TESTING AND FAULT ISOLATION section of TCAS 2000 Computer
Unit Component Maintenance Manual (CMM), ACSS Pub. No. A09-3841-004
(ATA 34-43-13) for test procedure information.
(2)  During functional testing, use the procedures and instructions in Appendix A of
the Integrated Test Specification, Part No. IT7517900, to install Product
Software, Part No. 9000221-006.
(3)  After software loading is complete, use the steps that follow to make sure that the
new software Part Number installed correctly.
a)  Click on Applications to pull down the menu.
b)  Choose Software P/N.
c)  Make sure that the new Operational Software Part Number is
3477-LTZ-100-03.
d)  Click Exit to exit the application.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 25 of 34

### Page 26 (OCR)

ACSS®
& Traves Company ans
Service Bulletin
1. Identification Label Update - At an ACSS-Authorized Service Center
WARNING
WHEN HANDLING SOLVENTS, MAKE SURE THERE IS
SUFFICIENT VENTILATION IN THE WORK AREA. USE
APPLICABLE PRECAUTIONS TO PREVENT INHALATION OF
VAPORS AND EXPOSURE OF FUMES TO FLAME.
If the work described in this Service Bulletin is done at an ACSS-Authorized Service
Center, the full Product Identification Label can be replaced to show the new part
number.
Full Product Identification Labels can only be installed at an ACSS-
Authorized Service Center. All other Service Centers must obey the
instructions in Section 3.G (Identification Label Update - On Board the
Aircraft or On a Bench System) to update existing Product Identification
Identify and examine the Identification Labels on the front of the TCAS 2000 CU.
Choose one of the steps below to update the Product Identification Label.
If the label includes a 2D barcode, use ACSS Service Bulletin, Pub. No.
8007660-001 (ATA No. 7517900-34-0024) to replace the entire Product
Identification Label with the new ACSS 2D barcode label. See Figure 6 on Page
(2)  If there is no 2D barcode on the label, use the instructions in Section 3.G
(Identification Label Update - On Board the Aircraft or On a Bench System) to
update Product Identification Labels. See Figure 7 on Page 33 for reference.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 26 of 34

### Page 27 (OCR)

& Ties comparations  ACSS
Service Bulletin
Table 7. Viewable Software Configuration
Before and After Software Upgrade
Software Part Number
(Installed Before Upgrade)
End Item  Mod  Software Part No.  Displayed OP SW
Part Number
7517900-20001  9000221-001  340A-HNP-02B-MV
9000221-002  3412-HNP-02B-30
7517900-65001  9000221-001  340A-HNP-02B-MV
A  9000221-002  3412-HNP-02B-30
7517900-20002, -65002  9000221-004  3475-LTZ-100-01
Newly Installed Software Part Number
(After Upgrade)
End Item  Mod  Software Part No.  Displayed OP SW  Part Number
7517900-20004, -65004  9000221-006  3477-LTZ-100-03
NOTE: 1.  If you use Method 3 (Stand-alone PC with an installed TCAS Software Part
Number Tool) to read the Software Part Number, an "@" symbol will show
after the number.
NOTE: 1. TCAS 2000 Product Software that is released after the release of Software,
Part No. 9000221-006 is not included in Table 7, above.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviato Norn Un Avenue, Phoenix, Az 55927-4741
Printed in U.S.A.  Page 27 of 34

### Page 28 (OCR)

ACSS  A Thaks Company tons
Service Bulletin
Decision Flowif updating TCAS 2000 Operational
Software onboard the aircraft is an option
No  No
Does the aircraft
have an ADL?  Obtain a PDL
Yes  Yes
Can you read the TCAS
No  Obtain PC program and  No
OP software Part No.
on aircraft?  make RS-232 cable
Yes  Yes
Update Unit On Board Aircraft  Update completed at Service Cente
Read current TCAS OP software  Send unit to Service
part number if available  Center for update
on cockpit system
Service Center updates
Upload new software using  and retums unit
ADL or PDL
Install updated unit in aircraft
Was the software upload
successful?
No
Yes
Verify upload by
reading new software Part No  Contact
ACSS Customer
Response Center
Perform system Retum-to-Service  +1 623-445-7070
(Option 3)
Install new software Part No. label
or mark Mod on TCAS unit
Customer completes aircraft certification documentation update with authorities
Figure 1. TCAS 2000 Computer Decision Chart
(On Board the aircraft or by returning to a Service Center)
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 28 of 34

### Page 29 (OCR)

& hales comparatons  ACSS®
Service Bulletin
SO TCAS Software Part Number Tool, 90007 27-003
TCAS Software Part Number  Get PN From
9001049-001  • ITCAS
Transponder
Press the 'Quit' button to exit
Help  Get Part Number  Quit
Figure 2. Example of a TCAS Software Part Number
Tool Dialog Box
J1
CONNECTOR  MOUNTING
TRAY
(ARINC 615)
PRODUCT SOFTWARE
PART NUMBER DISPLAY
ITCAS
2000
T  cU
(P/N 200F-00084)  ADAPTER CABLE
SOFTWARE
VERIFICATION FIXTURE
(T326948-901)
31-PIN MATING  53-PIN MATING
CONNECTOR  CONNECTOR
(ARINC 615)
Figure 3. Software Verification Fixture to TCAS 2000 Computer Interconnect
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 29 of 34

### Page 30 (OCR)

ACSS®
Service Bulletin
J1  MOUNTING
CONNECTOR  TRAY
(ARINC 615)
VSI/TRA
4067241-843 -844
-845 -860  TCAS
-861 -862  2000
-880 -881
-882 -890  cU
-891 -892
ADAPTER CABLE
(P/N 200F-00083)
41-PIN MATING  53-PIN MATING
CONNECTOR  CONNECTOR
(ARINC 615)
Figure 4. Remote VSI/TRA to TCAS 2000 Computer Interconnect
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 30 of 34

### Page 31 (OCR)

A hakes company tons  ACSS®
Service Bulletin
53 PIN  10 feet max.  9 PIN 'D'
TCAS 2000  9 PIN
53 PIN  J1  "D'
MALE  FEMALE
TX
40 -
RX
41  < 2
GND  SHIELD
49
Figure 5. RS-232 PC to TCAS 2000 Interface Cable
NOTE: 1. Mating J1 front connector on the TCAS 2000 CU:
• HI 4004295-160 or
• ITT KJ6F18A53P or
• MS27473E18A53P or
• JT06RE-18-53P
NOTE: 2. Mating connector to the PC:
• Standard 9-pin, RS-232 connector with female contacts.
NOTE: 3. A popular wiring choice is a single, twisted-pair shielding wire using the
shield as the common ground.
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7hh Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 31 of 34

### Page 32 (OCR)

ACSS®  & hales comparations
Service Bulletin
ACSS  MT:
TCAS COMPUTER
7517900 (FOR MILITARY USE ONLY)
WT  Lbs  DO-160C ENV CAT[A2F2]YBB[CLMY]
Only
DATE  INSP.#  TSO-C119b  *  TSO-C119b
is visible
FCC ID P8CRT-950
MFR 1WYD3
Install new Software  2D bar code
Label below dotted
line as shown.
SER:
HARDWARE MOD
ABCDEFGHJKLMNPRSTU
PNR 7517900-  MADE IN USA
DO-178B LEVEL B SOFTWARE MOD
ABCDEFGHJKLMNPRSTU
19810 N 7th Ave Phoenix, AZ USA
Figure 6. Generic Example of TCAS 2000 Product ID Label
with 2D Bar Code)
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 32 of 34

### Page 33 (OCR)

a Thales Company ons  ACSS®
Service Bulletin
ACSS  MT-_
TCAS COMPUTER
7517900
WT  Lbs  DO-160C ENV CAT [A2F2]YE 6 [CLMY]
Only
DATE INSP.#  TSO-C119D  TSO-C119b
Install new  FCC ID P8CRT-950  is visible
Software Label
below dotted line  as shown.  MFR 1WYD3  NOT APPROVED  FOR CIVILIAN
USE, FOR
MILITARY
SER  USE ONLY
HARDWARE MOD
ABCDEFGHJKLMNP
PNR 7517900-
DO-178B LEVEL B SOFTWARE HOD
ABCDEFGHJKLMN  RSTU
Phoenix, AZ USA
Figure 7. Generic Example of TCAS 2000 Product ID Label
with No 2D Bar Code
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 33 of 34

### Page 34 (OCR)

ACSS®
Service Bulletin
ACSS
TCAS COMPUTER
7517900
FCC ID P8CRT-950  Before installing a
new SW Label,
make sure that the
This is the  printed dash
Software part  number is -XX004,
of the label.  MFR 1WYD3  where -XX is -20 or
Use only this  -65,
part to
update an  HARDWARE MOD
ACSS label.  ABCDEFGHJKLMNPRSTU
PNR 7517900-  MADE IN USA
Make sure that
TSO C1196
shows on the
label
GHJKLMNPRSTU
19810 N 7th Ave Phoenix, AZ USA
Figure 8. Example of an ACSS Product Identification Overlay Label
Release Date: May 27, 2010  ATA Service Bulletin No. 7517900-34-6042
Revision 03:June 30, 2011  ACSS Publication No. 8008236-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 34 of 34

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
