# ACSS Service Bulletin 9000000-34-6016: No revision named

- Rights: © Aviation Communication & Surveillance Systems, LLC. Filed by the FAA in regulations.gov docket FAA-2010-1204; AD 2012-02-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [ACSS Service Bulletin 9000000-34-6016](https://openairdocs.org/service-documents/acss/sb-9000000-34-6016.md)
- Title as filed: U.S. DOT/FAA - Service Information - 7
- Pages: 38
- PDF: https://openairdocs.org/files/sha256/5e/e9/5ee998e8a4b8af28b7d8f8e3d63a469e9a77a911195bf9bad9a5b9d02833cb37
- Page: https://openairdocs.org/service-documents/acss/sb-9000000-34-6016/file/5ee998e8a4b8

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ACSS®
A has company tons
Service Bulletin
Transmittal Information
ACSS Publication Number 8008233-001
ATA Service Bulletin 9000000-34-6016
NAVIGATION -
TRAFFIC AND TERRAIN COLLISION AVOIDANCE SYSTEM -
T2CAS COMPUTER UNIT - Part No. 9000000-10002 thru -10006,
- 10008, -10204, -10205, -10206, and -10208, Part No. 9000000-20002 thru
-20006, -20008, -20204, -20205, -20206, and -20208, and Part No.
9000000-55002 thru -55006, -55008, -55204, -55205, -55206, and -55208
- Updates T2CAS TT-950/-951/-952 Computer Units to Related Part No.
9000000-10404, -10405, -10406 and -10408, Part No. 9000000-20404,
-20405, -20406, and -20408, and Part No. 9000000-55404, -55405, -
55406, and -55408. Installs New Operational Software, Part No. 9001049-
005 to Incorporate Updates to Interference Limiting Functionality With
Altitude Correction.
EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE
This technical data is controlled under the Export Administration Regulations (EAR) ECCN 7E994 and may not
be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization of the U.S.
Department of Commerce.
LEGAL NOTICE
This document and the information disclosed herein are proprietary data of Aviation Communication and
Surveillance Systems, LLC. Neither this document nor the information contained herein shall be reproduced,
used, or disclosed to others without the written authorization of Aviation Communication and Surveillance
This document is being furnished in confidence by Aviation Communication and Surveillance Systems, LLC. The
information disclosed herein falls within exemption (b) (4), Freedom of Information Act, (5 USC 552), and the
prohibitions of the Disclosure of Confidential Information Generally (18 USC 1905).
Implementation of this software update described in this Service Bulletin involves changes to software. The
software required to effect this update is copyrighted by ACSS. License to use this software to perform the
modifications set forth in this Service Bulletin shall be granted by ACSS in accordance with terms and conditions
to be entered into between ACSS and the customer.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 1 of 38

### Page 2 (OCR)

ACSS®
Thales Company
Service Bulletin
SUMMARY
This Service Bulletin gives instructions for the installation of new TCAS Product Software, Part
No. 9001049-005. Installation of this new Operational Software converts T-CAS Computer
Units as shown in the list on Page 2.
Unit Part No. Before Modification  Unit Part No. After Modification
9000000 - 10002, -10003, -10004,  -10204  to  9000000-10404
9000000-10005, -10205  to  9000000-10405
9000000 - 10006, -10206  to  9000000-10406
9000000 -10008, -10208  to  9000000-10408
9000000 -20002, -20003, -20004,  9000000-20404
-20204  to
9000000-20005, -20205  to  9000000-20405
9000000 -20006,-20206  to  9000000-20406
9000000 -20008, -20208  to  9000000-20408
9000000 -55002, -55003, -55004,  -55204  to  9000000-55404
9000000 -55005, -55205  to  9000000-55405
9000000 -55006, -55206  to  9000000-55406
9000000 -55008, -55208  to  9000000-55408
Refer to Section 1.C on Page 5 for a list of the changes that are a part of new TCAS
Operational Software, Part No. 9001049-005.
NOTE: The work described in this Service Bulletin can be completed on board the aircraft or
on a TCAS 2000 Manual Test Station (MTS).
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 2 of 38

### Page 3 (OCR)

ACSS
& Tales Company tons
Service Bulletin
REVISION HISTORY
Revisions to ATA Service Bulletin No. 9000000-34-6016 (ACSS Pub. No. 8008233-001) are
summarized in Table 2 below.
Table 1. Service Bulletin Revisions
Revision  Date of Release
Initial Release  June 4, 2010
Revision 01  August 10, 2010
Revision 02  February 1, 2011
Revision 03  June 30, 2011
NOTE: This Service Bulletin obeys ASD-STE100 Simplified Technical English guidelines and
ATA iSpec2200 specifications, wherever practicable.
Table 2. Revisions Summary
Revision  Page  Change Made
1  VAR  Removed all instances of Part No. XX007 from the list of effective
parts. Also removed -XX207 from list of new part numbers and
removed related labels part numbers.
5, 7, 26  Updated applicable revision letters for test software to the latest
released version.
2  VAR  Made minor changes in the document to agree with current ACSS
format and style standards.
1  Added Export Administration Regulations (EAR) Notice.
1, 8, 13  Removed references to Part Availability.
1, 5  Corrected Part Number in Title.
Was: "  '...20206 and -20008"
Now: "  ...20206 and -20208"
5, 8, 21,  Removed Section L. Test Program information is available in other
26  sections of the Service Bulletin or in the "Testing and Fault Isolation"
section of the Component Maintenance Manual (CMM). Removed all
references to test procedures/software that are included in the CMM
and referred operators to the CMM.
13, 24, 27,  Updated Table 4 to include options for updating labels that have a
2D barcode and those that do not. Updated related installation
instructions. Added figure to show new tear-off software label.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Page 3 of 38

### Page 4 (OCR)

ACSS®  A hales comparations
Service Bulletin
Revision  Page  Change Made
03  VAR  Added Part No. -XX404, -XX405, -XX406, and -XX408. Replace OP
Software Part No. 9001049-004 with new Part No. 9001049-005.
4,7  Added Part No. -XX204, -XX205, -XX206, and -XX208 to list of
effectivity.
7  Updated Sections 1.C to include information about the altitude input.
9, 12  Updated Section 2.A and 2.B for pricing information.
13  Updated Table 4 to include new labels for new dash numbers.
28,29  Updated Table 7 and Table 8 to include new software.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 4 of 38

### Page 5 (OCR)

ACSS®  Thales Company
Service Bulletin
1.  PLANNING INFORMATION
A. Effectivity
ATA Service Bulletin No. 9000000-34-6016 (ACSS Pub. No. 8008233-001) is
applicable to T'CAS Computer Unit, Part No. 9000000-10002 thru -10006, -10008,
-10204, -10205, -10206, and - 10208, Part No. 9000000-20002 thru -20006, -20008,
-20204, -20205 -20206, and -20208, and Part No. 9000000-55002 thru -55006,
-55008, -55204, -55205, -55206, and -55208.
B. Concurrent Requirements
If a TCAS 2000 Manual Test Station (MTS) is used to load the operational software,
one of the Service Bulletins that follows must be done before or in conjunction with this
Bulletin:
• ATE Bulletin Pub. No. 8008300-001 (ATA Service Bulletin No. 9000000-34-6020)
which installs test program Part No. 9000237-001 for PCs with Windows NT
operating system
or
• ATE Bulletin Pub. No. 8008299-001 (ATA Service Bulletin No. 9000000-34-6019)
which installs test program Part No. 9000948-001 for PCs with Windows XP
operating system.
C. Reason
New Operational Software, Part No. 9001049-005, incorporates updates to the
Interference Limiting functionality. These updates improve tracking of nearby Mode-S
intruders in high density environments. Customers upgrading from older software
versions of TCAS will also gain the benefit of minor changes that have been
incorporated into later software releases. These changes include minor improvements
to the internal built-in-test operation to reduce nuisance faults and improve overall
reliability as well as minor enhancements to input/output signal processing to improve
interoperability with other avionic systems.
This update also includes a correction to an issue on some installations whereby the
TCAS does not go into STBY mode (TCAS OFF) when the active transponder senses
an altitude mis-compare between 2 Gillham altitude inputs or other possible air data
failures. This potential issue is dependent on the altitude interface to the transponder
and the transponder used. The following helps describe systems with or without the
potential issue:
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 5 of 38

### Page 6 (OCR)

ACSS
-a communicati
hales Comp
Service Bulletin
Altitude Interface to
Mode S Transponder  Potential Issue
the Transponder
ACSS Part No. 7517800 with any dash  Gillham or ARINC 429  No
number
ACSS Part No. 7519350 with any dash  Gillham or ARINC  No
number  429
ACSS Part No. 7510700-850, -951, -  ARINC 429  No
952, -953
ACSS Part No 7510700-850, -951, -  Gillham  Yes
952, -953
Other Manufacturer's Mode S  Check with test  Any
Transponders  shown below.
TEST: To check for possible system issue, check for system response while
powered up and valid, then simulate invalid primary altitude to the active
transponder by pulling that altitude source's circuit breaker. The TCAS
display should change to TCAS OFF or TCAS FAIL (the exact annunciation
is dependent on the type of transponder and display involved - either
indication is acceptable as it indicates that the TCAS is no longer functional
in this situation).
The new modification updates the applicable T'CAS Computer Unit to 9000000-10404
thru -10406 and -10408, Part No. 9000000-20404 thru -20406 and -20408, and Part
No. 9000000-55404 thru -55406 and -55408.
D. Description
This Service Bulletin gives instructions for installing new Operational Software on
board the aircraft or by final Acceptance Test on a TCAS 2000 Manual Test Station
(MTS).
This Service Bulletin also includes instructions for installing a new software tear-off
label on the front of the unit to identify the new dash number.
NOTE: Some units have Product Identification labels made of metalized polyester
material. New tear-off labels are all made with white polyester. A mixture of
materials on an updated Product Identification Label is permitted.
When this software modification is done at an Authorized Service Center, the entire
ACSS label can be replaced.
E. Compliance
This Service Bulletin is highly recommended because it has an effect on aircraft safety.
This Service Bulletin has been written in support of a potential FAA Airworthiness
Directive. Do this conversion as soon as possible. The FAA Airworthiness Directive
will identify the compliance schedule.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 6 of 38

### Page 7 (OCR)

ACSS®
Service Bulletin
F. Approval / Authorization Granted
The content of this Service Bulletin is reviewed and approved by the FAA.
This Service Bulletin includes the information that follows:
(1) Gives T'CAS Computer Unit modification instructions from the manufacturer.
(2)  Gives authorization for the installation and operation of the modified T'CAS
Computer Unit on board the aircraft as identified below:
Unit Part No. Before Modification  Unit Part No. After Modification
9000000-10002, -10003, -10004,  to  9000000-10404
-10204
9000000 -10005, -10205  to  9000000-10405
9000000-10006, -10206  to  9000000-10406
9000000 -10008, -10208  9000000-10408
9000000 -20002, -20003, -20004,  9000000-20404
to
-20204
9000000 -20005, -20205  to  9000000-20405
9000000 -20006,-20206  to  9000000-20406
9000000 -20008, -20208  to  9000000-20408
9000000 -55002, -55003, -55004,  9000000-55404
-55204  to
9000000-55005, -55205  to  9000000-55405
9000000 -55006, -55206  to  9000000-55406
9000000 -55008, -55208  to  9000000-55408
After completing this FAA-approved modification, it is the responsibility of the aircraft
operator to get "Return to Service" authorization, if necessary, from the applicable
regulatory authorities.
G. Manpower
When the modification described in this Service Bulletin is done on board the aircraft,
approximately 0.5 work hours are necessary.
Approximately 0.5 work hours are necessary when the modification is done on a TCAS
2000 Manual Test Station (MTS). Approximately 1.0 work-hours are necessary to
complete Final Test of the unit using manual test procedures.
H. Weight and Balance
This modification does not change weight and balance.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 7 of 38

### Page 8 (OCR)

ACSS®
a hales comparations
Service Bulletin
I. Electrical Load Data
This modification does not change electrical load data.
J. Software Accomplishment Summary
Software is changed by this conversion/modification.
Work activities and processes described in this software update meet the
requirements of RTCA Document DO-178B, Software Considerations in Airborne
Systems and Equipment Certification.
K. References
(1) Reference Documents
The document identified in Table 3 is for reference only and is not necessary to
implement this Service Bulletin. Subsequent revisions to this document are
permitted.
Table 3. Reference Documents
Document Number  Revision  Title
FAA Best Practices  22 Dec. 2000  Scrap or Salvageable Parts and Materials
Document
(2) Related Service Bulletins
None
L. Other Publications Affected
As a consequence of this Service Bulletin, ACSS will revise the documents in the list
that follows:
• The T'CAS Computer Unit and Aircraft Personality Module Component
Maintenance Manual (CMM), ACSS Pub. No. 8000975-001 (ATA No. 34-43-12)
• The T'CAS Traffic and Terrain Collision Avoidance System, System Description
and Installation Manual, ACSS Pub. No. 8000451-001 (ATA No. 34-43-20).
The Airworthiness Analysis is not changed.
The Testing is not changed.
M. Interchangeability of Parts
This is not applicable to the changes outlined in the Service Bulletin.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 8 of 38

### Page 9 (OCR)

ACSS®
Thaiss ommunicati
Service Bulletin
2. MATERIAL INFORMATION
A. Cost and Availability
(1)  Pricing and Availability
Equipment operators  Non-Authorized Service  Centers  Availability
Free of Charge (FOC)  $1,000 USD (2011)  30 days after receipt of
order
NOTE: For additional pricing information, refer to Section 2.B, Industry Support
Information, on Page 12.
(2) Placing an Order
Use a standard Purchase Order (PO) form, or complete the ACSS Service
Bulletin Materials Order Form (OA-009) shown on Page 11. To expedite your
order, include all of the information in the list that follows:
A Purchase Order Number
• Reference to this Service Bulletin:
ATA Part No. 9000000-34-6016 (ACSS Pub No. 8008233-001)
Aircraft Type
Unit Original Part Number
Unit Serial Number(s)
•  Price of modification for each unit
Part Number(s) being ordered (Refer to Table 4 on Page 13 for a list of part
numbers and order only those parts that are applicable to the unit to be
updated.)
Quantity ordered
Bill-to address/instructions
Ship-to address/instructions
Freight carrier Account number and special shipping instructions
When ordering software and/or parts, send Purchase Orders to:
Aviation Communication and Surveillance Systems (ACSS)
Attn: Customer Order Administration
19810 N. 7" Ave
Phoenix, AZ 85027-4741 USA
Phone: (623) 445-7040
Fax: (623) 445-7004
or e-mail: acss.orderadmin@L-3com.com
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 9 of 38

### Page 10 (OCR)

ACSS®
That municatio  ompar
Service Bulletin
NOTE:  All orders are subject to a standard lead time of 2 weeks to give
sufficient time for documentation validation and order preparation.
When sending units to an ACSS Service Center, send Purchase Orders to:
Aviation Communication and Surveillance Systems (ACSS)
Attn: Customer Order Administration
19810 N. 7th Ave
Phoenix, AZ 85027-4741 USA
Phone: (623) 445-7030
Fax: (623) 445-7002
or e-mail: acss.phxrepair@L-3com.com
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 10 of 38

### Page 11 (OCR)

ACSS®
Service Bulletin
ACSS SERVICE BULLETIN
MATERIALS ORDER FORM
To secure the rights to use ACSS software, ACSS requires the completion of a Software License Agreement and Appendix. If
a current Software License Agreement exists with ACSS, the customer is only required to sign an Appendix to the Agreement
for the software being ordered. Based on the information in this order form, ACSS Order Administration will complete the
Appendix and/or the Software License Agreement and forward it to the customer for signatures.
The Software License Agreement, or Appendix, must be signed and received by ACSS prior to shipment of the order.
ALL of the following information MUST be completed for ACSS to quickly and efficiently process this software order.
Customer Name  Customer Purchase Order Number  Date
Unit Original Part Number  Customer Contact Name  Customer Contact Email Address
A/C Type  Applicable ACSS Service Bulletin Pub. No.  Price of Modification for each Unit
Unit Serial Number(s) Attach additional sheets as necessary to list all of the serial numbers being updated by this software order.
* This completed form can be used as the formal Purchase Order (PO) or can be used as an information sheet attached to the PO.
PARTS BEING ORDERED (as listed in the applicable Service Bulletin section, 'Material Necessary for Each Component')
Part Number  Description  Quantity
NOTE: Each Compact Flash Card/Diskette can perform an unlimited number of upgrades. Please order a minimum quantity to meet your needs.
BILL TO ADDRESS  SHIP TO ADDRESS
Freight Carrier and Account Number  Special Shipping Instructions
SUBMIT THIS ORDER TO: Aviation Communication and Surveillance Systems (ACSS), LLC
Attn: Customer Order Administration
19810 North 7th Avenue
Phoenix, AZ 85027-4741, USA
Phone: 623.445.7040
Fax: 623.445.7004
Email: acss.orderadmin@L-3com.com
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 11 of 38

### Page 12 (OCR)

ACSS®
nicommunicatior  ompar
Service Bulletin
B. Industry Support Information
NOTE:  ACSS's on-line electronic system gives customers access to a variety of
product-related publications, including Service Bulletins and Technical
Newsletters. Go to the ACSS Customer Services web site at:
http://www.acsscustomerservices.com/CustomerServices.
(1)  Modification at an ACSS-Authorized Repair Station:
This Service Bulletin will be done at no cost (FOC) to the Operator.
Pricing for this Service Bulletin is applicable to those customers who use on-
board data loading or their own shop procedures to complete this upgrade.
If this upgrade is not installed on the aircraft, a shop Bench Test Fee is
applicable for all units sent to ACSS for this Software upgrade.
(2)  Modification by an Equipment Operator:
For equipment under warranty, ACSS will reimburse the operator for the
cost of parts and labor needed to complete this Service Bulletin upon
receipt of a valid warranty claim and subject to the Terms and Conditions of
the applicable Product Support Agreement.
or
For equipment out of warranty, the Operator is responsible for the cost of
Prefer to Section 2.A on Page 9.  parts, and labor hours will not be reimbursed. For Cost and Availability,
(3) Modification at a Non-Authorized Service Center:
Non-Authorized Service Centers are responsible for the entire cost of the Service
Bulletin. For Cost and Availability, refer to Section 2.A on Page 9.
NOTE: 1. A shop Bench Test Fee is applicable for those units sent to ACSS for
this Software upgrade and will be based on current catalog pricing.
NOTE: 2.  Other repairs will be quoted separately. Please speak or write to an
ACSS Customer Order Administrator and request scheduling information
before sending a unit for repair or modification.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 12 of 38

### Page 13 (OCR)

A haks companyions  ACSS®
Service Bulletin
C. Material Necessary for Each Component
(1) Material to be Purchased
The items identified in Table 4 below are necessary to complete this Service
Bulletin.
Table 4. Material to Be Purchased
New  Old  Instructions/
Part Number  Name  Part Number  Qty.  Disposition
9001049-005  TCAS Operational Software  Refer to Table 7 on Page 28  1, 2,4
Software Tear-Off Labels - Non- 2D Barcode Compatible
(See Figure 9 on Page 35)
9000299-096  T CAS SW LABEL
or  (for - 10404 units)
9000299-097  T CAS SW LABEL
9000299-098  or  T-CAS SW LABEL  (for -10405 units)  N/A  A/N  1, 2, 3, 5, 7
or  (for-10406 units)
9000299-099  T'CAS SW LABEL
or  (for -10408 units)
9000299-100  T-CAS SW LABEL
or  (for -20404 units)
9000299-101  T CAS SW LABEL
or  (for -20405 units)
N/A  A/N  1, 2, 3, 5, 7
9000299-102  T CAS SW LABEL
or  (for -20406 units)
9000299-103  T CAS SW LABEL
or  (for -20408 units)
9000299-104  T CAS SW LABEL
(for --55404 units)
9000299-105  T CAS SW LABEL
9000299-106  T'CAS SW LABEL  (for -55405 units)  N/A  A/N  1, 2, 3, 5, 7
(for -55406 units)
9000299-107  T'CAS SW LABEL
(for -55408 units)
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7" Avenue, Phoenix, AZ 85027-474*
Printed in U.S.A.  Page 13 of 38

### Page 14 (OCR)

ACSS
Te ommunicatio
Service Bulletin
New  Old  Instructions/
Part Number  Name  Part Number  Qty.  Disposition
Software Tear-Off Labels - 2D Barcode Compatible
(See Figure 10 on Page 35)
9000299-307  T CAS SW LABEL
or  (for -10404 units)
9000299-308  T'CAS SW LABEL
or  (for - 10405 units)
N/A  A/N  1, 2, 3, 6, 7
9000299-309  T CAS SW LABEL
or  (for - 10406 units)
9000299-310  T'CAS SW LABEL
or  (for - 10408 units)
9000299-311  T CAS SW LABEL
or  (for -20404 units)
9000299-312  T CAS SW LABEL
or  (for -20405 units)
N/A  AVN  1, 2, 3, 6,7
9000299-313  T'CAS SW LABEL
or  (for -20406 units)
9000299-314  T'CAS SW LABEL
or  (for -20408 units)
9000299-315  T'CAS SW LABEL
(for -55404 units)
9000299-316  T'CAS SW LABEL
(for -55405 units)  N/A  AIN  1, 2, 3, 6,7
9000299-317  T'CAS SW LABEL
(for -55406 units)
9000299-318  T CAS SW LABEL
(for -55408 units)
A/N = As Necessary
N/A = Not Applicable
INSTRUCTIONS/DISPOSITION
1. For correct disposal of used parts, refer to FAA Best Practices document, Scrap or Salvageable
Parts and Materials, local regulatory agency, or local Repair Station policy.
2. Make sure quantities are correct and verifiable.
3. Include a full list of serial numbers to make sure you receive the correct identification plates.
4. Each Diskette can install an unlimited number of upgrades. Order a minimum quantity to satisfy
your needs.
5. Necessary only for units that have Product ID labels that do not include a 2D barcode.
6. Necessary only for units that have Product ID labels that include a 2D barcode.
7. Labels are all made of white polyester material.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 14 of 38

### Page 15 (OCR)

ACSS®
& Thales Company tons
Service Bulletin
(2) Material Supplied by the Operator
WARNING
BEFORE USING A MATERIAL, REFER TO THE
MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR
SAFETY INFORMATION. SOME MATERIALS CAN BE
DANGEROUS.
CAUTION
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO
MATERIALS SPECIFIED BY ACSS, MATERIALS THAT ARE NOT
EQUIVALENT CAN CAUSE DAMAGE TO THE EQUIPMENT AND
CAN VOID ANY WARRANTY.
The items identified in Table 5 below are commercially available. Do not order
them as part of this Service Bulletin. Equivalent alternatives are permitted for
items in the table.
Table 5. Operator Supplied Material
Part/Specification Number  Qty.  Keyword
HAZARD CODE 130D  A/N  Solvent, isopropyl alcohol (99%) - Optional
source
HAZARD CODE 203B  A/N  Ink, black marking, dye-based marker. No.
33003 Marker, Action, 33 Fine.
ITW Dymon, Olathe KS (CAGE 1QZC4)
A/N = As Necessary
D. Material Necessary for Each Spare
Same as Section 2.C, Material Necessary for Each Component.
E. Re-identified Parts
This reference is not applicable.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 15 of 38

### Page 16 (OCR)

ACSS®
na Communication  ompas
Service Bulletin
F. Tooling - Price and Availability
The items identified in Table 6 below are necessary to do the procedures in this
Bulletin. Equivalent alternatives are permitted for items in the table. If the work
described in this Service Bulletin is done on a TCAS 2000 Manual Test Station (MTS),
also refer to Section 1.B, Concurrent Requirements, on Page 5.
Table 6. Tooling
Part/Specification Number  Qty.  Description
Product Software Loading Onboard the Aircraft
Various  1  ARINC 615 Portable Data Loader (PDL)
(Refer to Note)
200F-00083  1  SW Validation Cable Adapter
Method 3 - Part Number Verification Using the TCAS Software Verification Fixture
T326948-901  1  Software Verification Fixture
(Refer to Note 1)
200F-00084  1  Adapter Cable (See Figure 5 on Page 33.)
OR
Method 4 - Part Number Verification Using the EDDIT Tool Version 1.10 or Version 1.11
9000441-110  EDDIT V1.10 - T CAS (EXTERNAL)
or  or
9000536-110  EDDIT V1.10 - T'CAS (LINE MAINT)
or
9000441-111  EDDIT V1  - T CAS (EXTERNAL)
or  or
9000536-111  EDDIT V1.11 - T'CAS (LINE MAINT)
Various  1  Stand-alone PC (Windows based)
Required when using EDDIT Tool to complete
validation of T CAS Product Software
RS-232  1  PC Interface Cable (See Figure 6 on Page 33.)
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 16 of 38

### Page 17 (OCR)

ACSS®
an thes company ans
Service Bulletin
NOTES:
1. The Software Verification Fixture is available from ACSS. Speak or write to an ACSS Customer
Order Administrator for more information. Refer to Section 2.A(2) on Page 9.
2. The four portable data loaders (PDL) in the list below were tested and found to be satisfactory
for installation of TCAS operational software onboard the aircraft or on a bench system:
3.5" Floppy Drive-based Systems:
DEMO Systems - Part No. 30100 (Revision A and later versions with Software Version
4.53 or earlier).
Teledyne - Part No. 2230915-01-D
• SFIM - Part No. YV68A110
Multiple Data Distribution Systems:
• Teledyne Controls - Portable Maintenance Access Terminal 2000® (PMAT 2000®)
Part No. 80000-05
Other part numbers from these suppliers and ARINC 615 data loaders from other
manufacturers can complete the task successfully but ACSS cannot vouch for their usability.
3. Customers can also use an Airborne Data Loader (ADL) or Maintenance Access Terminal
(MAT) to complete this upgrade but it is their responsibility to make sure that the load works
correctly with these systems
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 17 of 38

### Page 18 (OCR)

ACSS®
hales compan
Service Bulletin
3. ACCOMPLISHMENT INSTRUCTIONS
A. General Information
CAUTION
ALL DISASSEMBLY AND MODIFICATION PROCEDURES
MUST BE COMPLETED AT AN ANTISTATIC WORKSTATION.
REFER TO ESTABLISHED ANTISTATIC PROCEDURES.
CAUTION
THIS EQUIPMENT CONTAINS MOISTURE SENSITIVE
PARTS. SPECIAL HANDLING IS NECESSARY.
NOTE: 1. The Paragraph, Item, Table, and/or Figure numbers referred to in this Service
Bulletin can be found in one of the two manuals that follow:
T'CAS Computer Unit and Aircraft Personality Module Component
Maintenance Manual (CMM), ACSS Pub. No. 8000975-001 (ATA No. 34-
43-12)
T'CAS Traffic and Terrain Collision Avoidance System, System Description
and Installation Manual, ACSS Pub. No. 8000451-001 (ATA No. 34-43-20).
NOTE: 2. Before doing the work in this Service Bulletin, make sure you can read the
T'CAS Computer Unit software part number from a maintenance connection.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 18 of 38

### Page 19 (OCR)

ACSS®
Sa Communicati
Service Bulletin
B. Preparation
(1) Choose an Implementation Method
Before continuing with the software upgrade, refer to the decision chart shown in
Figure 1 on Page 30 and choose a method for implementing the TCAS Software
Upgrade.
(2)  Examine the current TCAS Product Software Part Number
Before starting this modification, use one of the Methods below to make sure you
can read the current Product Software part number and that it is correct.
Table 7 on Page 28 of this Bulletin gives a list of viewable TCAS software
part numbers before this software update
Table 8 on Page 29 gives a list of viewable TCAS software part numbers
after this software update.
CAUTION
MAKE SURE THE AIRCRAFT HAS GEAR DOWN AND
"WEIGHT ON WHEELS" DURING PART NUMBER
VERIFICATION OR WHILE REPROGRAMMING THE T CAS
COMPUTER UNIT ON BOARD THE AIRCRAFT.
CAUTION
DO NOT START A TCAS SYSTEM POWER CYCLE WHILE
YOU ARE REPROGRAMMING THE COMPUTER UNIT. THIS
CAN CAUSE A PROGRAMMING FAILURE.
Method 1
Software Verification with an Installed VSI/TRA Display (Cockpit only).
NOTE: Access to Extended Test Mode is available only on the ground with the
transponder in STANDBY mode.
Refer to the extended maintenance capabilities on status page code 0000
in the FAULT ISOLATION section of T CAS System Description and
Installation Manual, ACSS Pub. No. 8000451-001 (ATA No. 34-43-20).
Method 2
Aircraft display using the CFDS or CMC type maintenance programs.
Refer to the individual aircraft maintenance manual (AMM) for operating
procedures and refer to the onboard maintenance system program.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 19 of 38

### Page 20 (OCR)

ACSS
Service Bulletin
Method 3
TCAS Software Verification Fixture (Part No. T326948-901) and adapter cable,
Part No. 200F-00084. See Figure 5 on Page 33.
NOTE: For this verification option, the T'CAS Computer must be energized by
115 Vac aircraft power.
a)  Procure Software Verification Fixture, Part No. T326948-901, with related
adapter cable, Part No. 200F-00084. See Figure 5 on Page 33.
b)  Remove power to the T'CAS CU.
c)  Connect the adapter cable from the T'CAS CU to the Software Verification
Fixture. See Figure 5 on Page 33 for correct connection.
d) Apply power to the T-CAS CU.
e)  Push the button to start the Software Verification Fixture. Make sure that
you can read the software part number in the 15-digit display and that the
number agrees with the applicable part number.
• Table 7 on Page 28 of this Bulletin gives a list of viewable TCAS
software part numbers before this software update
• Table 8 on Page 29 gives a list of viewable TCAS software part
numbers after this software update.
f)  Complete a TCAS system self-test and make sure that the "TCAS TEST
PASS" message comes on.
Method 4
Version 1.10 or Version 1.11 of the EDDIT Tool lets the operator download all
TCAS software part numbers and CRC data to a log file. Use this file to make
sure the software part numbers installed in the T'CAS CU are correct.
a)  Procure EDDIT Tool. Refer to Table 6 on Page 16 for permitted EDDIT
Tool versions.
b) Procure or assemble an RS-232 Interface Cable as shown in Figure 6 on
Page 33.
c)  Use the EDDIT Tool work instructions in Appendix A of this Service
Bulletin.
NOTE: Operators must use the correct version of the EDDIT Tool.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 20 of 38

### Page 21 (OCR)

ACSS
L-3 communicati
Service Bulletin
Method 5
If an upgraded TCAS 2000 Manual Test Station MTS) is used to install this
upgrade, the correct Manufacturing Test Software must be installed. Refer to
Section 1.B, Concurrent Requirements.
Refer to the TESTING AND FAULT ISOLATION section of T'CAS Computer Unit
and Aircraft Personality Module Component Maintenance Manual (CMM), ACSS
Pub. No. 8000975-001 (ATA No. 34-43-12) for test procedure information.
C. Disassembly
No disassembly necessary.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 21 of 38

### Page 22 (OCR)

ACSS
na Communicatio  ompar
Service Bulletin
D. Modification Procedures - Onboard the Aircraft or On a Bench System
NOTE: Before starting this modification, use one of the Software Verification
Methods in Section 3.B(2) on Page 19 to make sure you can read the
installed software part numbers from a maintenance connection. Refer to
Table 7 on Page 28 for a list of Initial Software Part Numbers.
An ARINC 615 Portable Data Loader (PDL) installed on the Aircraft or Bench System
uploads new Product Software, Part No. 9001049-005 to the T-CAS CU. This
procedure is for cockpit systems only.
Procure an ARINC 615 (PDL) and the applicable interface cable. Refer to Table
6, Tooling, on Page 16 for information on recommended PDLs.
(2) Procure new TCAS Product Software, Part No. 9001049-005.
(3) Make sure that the system inputs for AIR/GROUND (RMP-5K) and GEAR
UP/DOWN (RMP-13F) are grounded.
(4) Stop the PDL and remove power from the TCAS Computer.
(5) Connect the cable from the PDL to the J1 front connector on the T'CAS CU.
(6) Apply power to the T'CAS CU.
(7) Start the PDL.
(8) Put Product Software Disk 1 into the PDL. Refer to the applicable instructions on
the PDL.
(9) When the PDL shows that the upload is successful, remove Disk 1 and do Step
(8) again for Disks 2 and Disk 3.
NOTE: If the upload is not successful, telephone the ACSS Customer
Response Center (CRC) at +1 (623) 445-7070 and select Option 3.
(10) Wait a minimum of 20 seconds after Disk 3 upload is complete.
(11) Stop the PDL, remove power from the T-CAS CU, and disconnect the interface
cable.
(12) Complete a functional test to make sure the TCAS system is fully operational.
a)  Apply power to the T'CAS CU.
b)  Push the "Push to Test" button on the front panel.
Result:
The green LED indicator on the front panel illuminates at the end of the test
cycle (approximately 8 seconds) to show that the T'CAS CU is functional.
NOTE: If a "TCAS TEST FAIL" message comes on, do a check to make sure
all LRUs that supply inputs to the T'CAS CU are powered on.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 22 of 38

### Page 23 (OCR)

ACSS®
Sa Communicatio
Service Bulletin
E. Return to Service
(1) Do Return-To-Service testing by referring to procedures identified in the
appropriate Aircraft Maintenance Manual (AMM).
(2) Software Part Number Verification
Use one of the Methods in Section 3.B(2) on Page 19 to make sure the new
Operational Software Part Number displayed is 3472-LTZ-200-05.
F. Assembly
No assembly is required.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7" Avenue, Phoenix, AZ 85027-474
Printed in U.S.A.  Page 23 of 38

### Page 24 (OCR)

ACSS
Service Bulletin
G. Identification Label Update - On Board the Aircraft or On a Bench System
WARNING
WHEN HANDLING SOLVENTS, MAKE SURE THERE IS
SUFFICIENT VENTILATION IN THE WORK AREA. USE
APPLICABLE PRECAUTIONS TO PREVENT INHALATION OF
VAPORS AND EXPOSURE OF FUMES TO FLAME.
After you are sure that installation of the new product software was successful, use the
procedure below to update the identification label on the T'CAS Computer Unit (CU).
(1) Examine the Product Identification Label on the front of the unit and procure the
correct software tear-off label(s). Refer to the chart below and to Table 4 on Page
13 to identify which labels are necessary.
2D Barcode on ID Label  No 2D Barcode on ID Label
Unit Part No.
(See Figure 10 on Page 35)  (See Figure 9 on Page 35)
9000000-10404  9000299-307  9000299-096
9000000-10405  9000299-308  9000299-097
9000000-10406  9000299-309  9000299-098
9000000-10408  9000299-310  9000299-099
9000000-20404  9000299-311  9000299-100
9000000-20405  9000299-312  9000299-101
9000000-20406  9000299-313  9000299-102
9000000-20408  9000299-314  9000299-103
9000000-55404  9000299-315  9000299-104
9000000-55405  9000299-316  9000299-105
9000000-55406  9000299-317  9000299-106
9000000-55408  9000299-318  9000299-107
NOTE: Some units have Product Identification labels made of metalized polyester
material. New tear-off labels are all made with white polyester. A mixture of
materials on an updated Product Identification Label is permitted.
(2) Use a utility knife to carefully remove only the bottom (software) part of the
Product Identification Label on the front of the unit. See Figure 7 on Page 34.
(3)  Carefully clean the software label area with isopropyl alcohol and give the
surface sufficient time to dry.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Page 24 of 38

### Page 25 (OCR)

ACSS®
Service Bulletin
(4) Install the new software tear-off label on the T'CAS CU in the same location as
the software tear-off label removed in Step (2) above.
NOTE: Do not put a mark on or conceal the Mod Letters on the new SW Mod status
table.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7*h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 25 of 38

### Page 26 (OCR)

ACSS®
& hales Compare tons
Service Bulletin
H. Modification Procedures - At a Service Center with a TCAS 2000 MTS
When a TCAS 2000 Manual Test Station (MTS) is used to install new Product
Software, Part No. 9001049-005, use the procedure that follows:
(1)  Complete a Final Test to make sure all system parameters are fully functional.
Refer to the TESTING AND FAULT ISOLATION section of T'CAS Computer Unit
and Aircraft Personality Module Component Maintenance Manual (CMM), ACSS
Pub. No. 8000975-001 (ATA No. 34-43-12) for test procedure information.
(2)  During functional testing, use the procedures and instructions in Appendix A of
the T CAS Acceptance Test Procedure Specification, Part No. 8000253-001 to
install Product Software, Part No. 9001049-005.
(3) After software loading is complete, use the steps that follow to make sure that the
new software Part Number installed correctly.
a)  Click on Applications to pull down the menu.
b)  Choose Software P/N.
c)  Make sure that the new Operational Software Part Number is
3472-LTZ-200-05.
d)  Click Exit to exit the application.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 26 of 38

### Page 27 (OCR)

ACSS®
& Tales Comparations
Service Bulletin
I. Identification Label Update - At an ACSS-Authorized Service Center
WARNING
WHEN HANDLING SOLVENTS, MAKE SURE THERE IS
SUFFICIENT VENTILATION IN THE WORK AREA. USE
APPLICABLE PRECAUTIONS TO PREVENT INHALATION OF
VAPORS AND EXPOSURE OF FUMES TO FLAME.
If the work described in this Service Bulletin is done at an ACSS-Authorized Service
Center, the full Product Identification Label can be replaced to show the new part
number.
Full Product Identification Labels can only be installed at an ACSS-
Authorized Service Center. All other Service Centers must obey the
instructions in Section 3.G (Identification Label Update - On Board the
Aircraft or On a Bench System) on Page 24 to update existing Product
Identification Labels.
(1)  Identify and examine the Identification Labels on the front of the T'CAS CU.
Choose one of the steps below to update the Product Identification Label.
If replacement of the full label is necessary, refer to the T-CAS Computer
Unit and Aircraft Personality Module Component Maintenance Manual
(CMM), ACSS Pub. No. 8000975-001 (ATA No. 34-43-12)
OR
If there is no 2D barcode on the label, use the instructions in Section 3.G
(Identification Label Update - On Board the Aircraft or On a Bench System)
on Page 24 to update the Product Identification Label. See Figure 7 on
Page 34 for reference.
OR
c)  If the label includes a 2D barcode, use ACSS Pub. No. 8007630-001 (ATA
Service Bulletin No. 9000000-34-0004) to replace the entire Product
Identification Label with a new ACSS 2D barcode label. See Figure 8 on
Page 34.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 27 of 38

### Page 28 (OCR)

ACSS  & Traves Compary ans
Service Bulletin
Table 7. Viewable Software Part Numbers Before Software Update
End Item  Mod  Software Part No.  Displayed OP SW Part  Number
9000000-10002
9000000-20002
9000000-55002  PS4084561-912  3416-HNP-02B-07
9000000-10003
9000000-20003
9000000-55003
9000000-10004
9000000-20004  A
9000000-55004
9000000-10005
9000000-20005
9000000-55005  9000714-001  9000714-001
9000000-10006
9000000-20006
9000000-55006
9000000-10008
9000000-20008
9000000-55008
9000000-10204
9000000-20204
9000000-55204
9000000-10205
9000000-20205
9000000-55205  9001049-004  3473-LTZ-200-04
9000000-10206
9000000-20206
9000000-55206
9000000-10208
9000000-20208
9000000-55208
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-601
Revision 03: June 30, 2011  ACSS Publication No. 8008233-00
Copyright 2011
Aviation Communication & Surveillance Systems, LLO
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 28 of 38

### Page 29 (OCR)

ACSS
& Thaves Comparys
Service Bulletin
Table 8. Viewable Operational Software Part Number After Software Update
End Item  Mod  Software Part No.  Displayed OP SW  Part Number
9000000-10404
9000000-10405
9000000-10406
9000000-10408
9000000-20404
9000000-20405  9001049-005  3472-LTZ-200-05
9000000-20406
9000000-20408
9000000-55404
9000000-55405
9000000-55406
9000000-55408
NOTE: T-CAS Product Software that is released after the release of Software, Part No.
9001049-004 is not included in Table 8 above.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 29 of 38

### Page 30 (OCR)

ACSS®
hales ommunicatiar
Service Bulletin
Decision if updating T-CAS Operational
Software onboard aircraft is an option
Does the aircraft  No  No
Obtain a PDL
have an ADL?
Yes
Can you read the TCAS
OP software Part No.
on aircraft?
Yes
Update Unit Onboard Aircraft  Update completed at Service Center
Read current TCAS OP
software part number (if  Send unit to Service
available) on cockpit system  Center for update
Upload new software  Service Center updates
using ADL or PDL  and retums unit
Do verification of
new software part number(s)
Complete system
Retur-to-Service testing
Customer installs updated
unit in aircraft
Install new software
label or identify new Mod on
Product ID label
Customer completes aircraft  AA9000000-001-DF
certification documentation
update with authorities
Figure 1. Decision Chart, T'CAS Computer
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 30 of 38

### Page 31 (OCR)

ACSS®
A Thales Compaications
Service Bulletin
Product Signature
Plate
Product Identification  SAYS OO PASS
Label
FARE OO FANS +  LED Panel
SELF TES  TRE O O OTSP
Software Modification
Table
DATA LOADER  • XPDR  BUS  TAWS LEDS
Push to Test Button
J1 Connector
Figure 2. T'CAS Front Panel with ACSS Identification Label Locations
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 31 of 38

### Page 32 (OCR)

ACSS
* hales Companaton
Service Bulletin
•ACSS  LT-952
COMPUTER UNIT  T CAS
TReS
modi  T O  AA9000000-001-PH
DATA LOADER
Figure 3. Compact Flash Card Access Port and LRU Identification Label
NOTE:  Make sure that the part number on the label is pointing in the correct direction as
shown. Align the card with the slot and push in firmly.
CF Card Ejector
button
AA9000000-002-PH
Figure 4. Compact Flash (CF) Card Eject Button Location
NOTE: To eject the CF card, push the eject button at the bottom of the card slot. Close and
secure the CF card protective door after removal.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 32 of 38

### Page 33 (OCR)

ACSS®
Service Bulletin
CONNECTOR  MOUNTING
PRODUCT SOFTWARE  (ARINC 615)  TRAY
PART NUMBER DISPLAY
T-CAS
cU
T
ADAPTER CABLE
SOFTWARE  (P/N 200F-00084)
VERIFICATION FIXTURE
(T326948-901)
31-PIN MATING  53-PIN MATING
CONNECTOR  CONNECTOR
(ARINC 615)
Figure 5. TCAS Software Verification Fixture and Adapter Cable
53-Pin  9-Pin "D"
Male  Female
TCAS  10 feet max.
53 Pin  J1
Male
MS27473T18A-53P  DB9 Female Conn = DE9S
Strain Relief = M85049/49-2-18W  Metal Hood = 980-2000-345
9-PIN "D"
FEMALE
40 +  RS-232 Data Input  TX  3
RS-232 Data Output  RX
41  2
49 +  Logic Common  GND  5
Tie Shield
To Connector
Case
Figure 6. T CAS - PC Interface and RS232 Cable Diagram
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 33 of 38

### Page 34 (OCR)

ACSS
& Thales Company ans
Service Bulletin
ACSS  19810 N 7th Ave Phoenix, AZ USA
Install new software  MFR 1WYD3  INSP # DATE
tear-off label below
original Product ID  WT  Lbs
label.  SER I  FCC ID P8CTT-950
MOD ABC/DEFGHJKLMN PR STU  HAW
PNR 9000000-  ¡ MADE IN USA
Remove only
the bottom part
of the original
Product ID label.
TAWS SOFTWARE DO-178B LEVEL B MOD  TCAS SOFTWARE DO-178B LEVEL B MOD
ABCDEFGHJKLMNPRSTU  ABCOEFGHJKLMNPRSTU
Figure 7. Example of T'CAS Computer Unit 6MCU Label
(Without 2D Barcode)
ACSS  19810 N 7th AVE PHOENIX AZ USA
Install new software  MFR 1WYD3  INSP # DATE
tear-off label below  WT  Lbs
original Product ID  FCC ID P8CTT- 950  2D Barcode
label.  SER
MOD ABC DEFGHJK L|MN PR STU
PNR 9000000-
Remove only
the bottom part
of the original
Product ID label.
TAWS SOFTWARE DO-178B LEVEL B MOD  TCAS SOFTWARE DO-178B LEVEL B MOD
ABCDEFGHJ KLM NPRSTU  ABCDEFOHJ/KLMN PRSTU
Figure 8. Example of T'CAS Computer Unit 6MCU Label
(With 2D Barcode)
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 34 of 38

### Page 35 (OCR)

ACSS®
-3 Communicat
Service Bulletin
Before installing the new software
tear-off label, make sure the new
dash number is correct. Refer to
Table 4 on Page 13.
PNR 9000000-  MADE IN USA
TAWS SOFTWARE DO-178B LEVEL B MOD  TCAS SOFTWARE DO-178B LEVEL B MOD
ABCDEFGHJ KL|M NPR|S|TU
Figure 9. Example of a Software Tear-Off Label
for the TCAS Computer Unit
Before installing the new software
tear-off label, make sure the new
dash number is correct. Refer to
Table 4 on Page 13
PNR 9000000-  MADE IN USA
TAWS SOFTWARE DO-178B LEVEL B MOD  TCAS SOFTWARE DO-178B LEVEL B MOD
A B|C|D|E|F|G|H J|K|L|M|N|P|R|S|T|U  [A|B|C|D|E|F|G|H|J|K|L|M|N|P|R|S|T|U
Figure 10. Example of a Software Tear-Off Label
for the T'CAS Computer Unit (2D Barcode Compatible)
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7" Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 35 of 38

### Page 36 (OCR)

ACSS®
an haks company ons
Service Bulletin
Appendix A
EDDIT Tool Part Number 9000441-110 or -111
(External Release version)
Verify the installed software part numbers by performing the following procedure:
(1)  Apply power to the T'CAS Computer.
(2)  Wait for all the lights on the front of the LRU panel to turn off.
(3)  Ensure that EDDIT Tool, Part No. 9000441-110, Version 1.10, or Part No.
9000441-111, Version 1.11, is loaded on the PC to be used. Refer to Table 6 on
Page 16.
(4)  Connect the Serial Port connector from the PC to the Portable Data Loader
(PDL) connector on the LRU.
(5)  Open Windows Explorer and navigate to the following "bin" file location:
File Location: C: \Program Files \ACSS\EDDIT\bin.
(6)  Locate the batch file that runs the EDDIT tool.
File name: runTawsRs. bat
(7)  Double-click the batch file, runTawsRs.bat.
Result:  A Command window opens and the automatic download process
begins.
MCR\WINNT\system32\cmd.exe  10x
09:56:02.219 ... opening result file (w): C:\EDDIT.  _SESSIONS\tawsPa
09:56:06-687  09:56:07.203  Sending:  bytes read! PASS! CAS
09:56:07.203  sending: 1  TAVSRUS_DUMP PartNum
2684 bytes read:  [PARI  1. LIO COMPONENT DATA].
09:56:29.797  - opening raw TAWS P/N data (ub›: C:NEDDIT_SESSIONS\tawsPartNum
bers. bin
09:56:29-797  closed file: C:NEDDIT_SESSIONS\tausPartNumbers.bin
59-56-  response ok
159-56  TCAS
09:56:  797  sending:
09:51  156  19 bytes read:  DUMP 0,1.. ERROR!..
09:56:34.156  ICAS ted response:  00000 =
09:56:37.156  command  try 2/10
09:56:37.156  sending:  DUMP 0.1
Figure 11. Example of an EDDIT Tool Batch Session
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 36 of 38

### Page 37 (OCR)

ACSS®
A Thales Company tons
Service Bulletin
(8)  When the download process is complete, the part numbers are saved to a
Notepad (.txt) file, which opens automatically on the PC desktop:
File Location: C: \EDDIT_SESSIONS
File name: tawsPartNumbers. txt
(9)  Scroll through the tawsPart Numbers. txt file to locate and verify the
operating system software part number(s).
Result: The taws PartNumbers text file is a static view of both TAWS and
TCAS Part Numbers and CRCS. The TCAS software part number is at
the end of the list. See Figure 12 below.
IawsPartNumbers.ixt - Notepad
File Edit Format View Help
n-110, Nov 5 2007
execution started:
TAWS Part Numbers:
[APM AC TYPE]
Generic 3 Test ASDB
[FPGA B C2 PN]
9000232-001
OPSYS PZ MOD]
PSYS P2 PI
00256-50
[TAWS DB PN]
DB1 5COMP
[TAWS DB CRC EMBEDDED]
0x67A6E190
[VAPM AAA FILES SELECTED]
+++ No Data
execution Finished: 2007 Now 01 08:554
Figure 12. Sample Text File Showing TCAS S/W Part Number
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7"h Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A  Page 37 of 38

### Page 38 (OCR)

ACSS
& Thales Company
Service Bulletin
(10) If necessary, use the Notepad menu options to print and/or save the list of part
numbers.
Note:  The tawsPartNumbers text file in the EDDIT_SESSIONS location is
overwritten each time the EDDIT tool process is used.
To print the list of Part Numbers, click File => Print.
To save the list of Part Numbers for future reference, click File => Save As.
c)  Save the log file with a unique file identifier using the following naming
convention: <T'CAS serial number><date><time>.
For example:
TCAS Software Part Number is "9000714-001", date is "06/24/2004" and
time is "1547".
File name typed is: 9000714-001062420041547.log
d)  Write down the location of file being saved for future printouts.
(11) Use the vertical scroll bar to scroll and verify that the following part numbers
match the part numbers in the taws Part Numbers text file:
TCAS Part Numbers
TCAS Software Part No:  3472-LTZ-200-05
(12) Click the Close icon (X) to close the tawsPartNumbers text file window; click
the Close icon (X) to end the cmd. exe session.
(13) Close the EDDIT Tool Window.
(14) Power down the T'CAS Computer and disconnect the PDL cable and PC from
the T CAS Computer.
Release Date: June 4, 2010  ATA Service Bulletin No. 9000000-34-6016
Revision 03: June 30, 2011  ACSS Publication No. 8008233-001
Copyright 2011
Aviation Communication & Surveillance Systems, LLC
19810 North 7th Avenue, Phoenix, AZ 85027-4741
Printed in U.S.A.  Page 38 of 38

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
