# Aerolite Alert Service Bulletin 21-006: No revision named

- Rights: © Aerolite. Filed by the FAA in regulations.gov docket FAA-2021-0452; AD 2021-12-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Aerolite Alert Service Bulletin 21-006](https://openairdocs.org/service-documents/aerolite/sb-21-006.md)
- Title as filed: Aerolite Alert Service Bulletin ASB-21-006
- Pages: 12
- PDF: https://openairdocs.org/files/sha256/a0/61/a061b53d64e2ee88327f42c79983cb94713c213502725af08211ab629658c432
- Page: https://openairdocs.org/service-documents/aerolite/sb-21-006/file/a061b53d64e2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT SERVICE BULLETIN 
ASB-21-006 
 
 
 
Modification of 3 Stretcher Unit Assy 
P/N 002095-502 
 
 
 
 
Agusta Westland 
AB 139 / AW139 
 
 
Initial Issue 
MAR 16/2021 
 
 
 
 
Aerolite AG 
Aumühlestrasse 10 
CH-6373 Ennetbürgen 
Switzerland 
 
The technical content of this document is approved under the authority of the DOA ref. EASA.21J.359

### Page 2

ASB-21-006 
SERVICE BULLETIN 
Page 2 
MAR 16/2021 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INTENTIONALLY LEFT BLANK

### Page 3

ASB-21-006 
SERVICE BULLETIN 
Page 3 
MAR 16/2021 
LOG OF REVISIONS 
 
 
 
LIST OF EFFECTIVE PAGES 
Page Revision Date  Page Revision Date 
1 0 MAR 16/2021  8 0 MAR 16/2021 
2 0 MAR 16/2021  9 0 MAR 16/2021 
3 0 MAR 16/2021  10 0 MAR 16/2021 
4 0 MAR 16/2021  11 0 MAR 16/2021 
5 0 MAR 16/2021  12 0 MAR 16/2021 
6 0 MAR 16/2021     
7 0 MAR 16/2021     
 
  
Rev. Issue Date Reason for Revision Checked Verified CVE 
Approved (under 
the authority of the 
DOA ref. 
EASA.21J.359) 
0 MAR 16/2021 Initial Release

### Page 4

ASB-21-006 
SERVICE BULLETIN 
Page 4 
MAR 16/2021 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INTENTIONALLY LEFT BLANK

### Page 5

ASB-21-006 
SERVICE BULLETIN 
Page 5 
MAR 16/2021 
1. Planning Information 
A Effectivity 
All Leonardo helicopters, models AB139 and AW139, installing the 3-Stretcher 
Kit P/N 139084-501. 
B Reason 
In order to prevent possible structural damages in case of emergency landing 
there is a need to limit to 61 kg (134.5 lbs) the maximum weight of the patient 
occupying the primary stretcher of the 3-stretcher unit P/N 002095-502. 
C Description 
This service bulletin gives the necessary information to install the information 
placard P/N 080-0312690-001 on the 3-stretcher unit assembly   
P/N 002095-502 stating a limitation of 61 kg (134.5 lbs) for the maximum 
allowable weight of the occupant on the primary stretcher. 
D Compliance 
Within and not later than thirty (30) flight hours  (FH) after the issuance of this 
ASB. 
Complete the Implementation Confirmation page in this Alert Service Bulletin 
and return it to Aerolite AG 
E Approval 
The technical content of this service bulletin is approved under the authority of 
the DOA ref. EASA 21J.359. 
F Manpower 
1 hours. 
G Weight and Balance 
Not applicable. 
H Electrical Load Data 
Not applicable. 
I Software Accomplishment Summary 
Not applicable. 
J References 
Standard Practices Manual (SPM) 
K Other Publications Affected 
Not applicable 
L Family Tree of Modification Relatioships 
Not applicable.

### Page 6

ASB-21-006 
SERVICE BULLETIN 
Page 6 
MAR 16/2021 
M Points of Contact 
For further assistance contact: 
Aerolite AG 
Aumühlestrasse 10 
CH-6373 Ennetbürgen 
Switzerland 
Tel: +41 (0)41 624 58 58 
Fax: +41 (0)41 624 58 59 
Email: info@aerolite.ch

### Page 7

ASB-21-006 
SERVICE BULLETIN 
Page 7 
MAR 16/2021 
2. Material Information 
A Material – Cost and Availability 
Owners/Operators will receive the Required Materials on free of charge basis, 
except for Consumable Materials. 
B The following parts are installed. 
Part Number Designation Qty 
080-0312690-001 Placard 1 
C Tooling – Price and Availability 
Not applicable.

### Page 8

ASB-21-006 
SERVICE BULLETIN 
Page 8 
MAR 16/2021 
3. Accomplishment Instructions 
A References 
None 
B Special Tools and Equipment 
None. 
C Consumable Materials 
D Expendable Parts 
None 
E Procedure (Fig. 1) 
(1) Get access to the cabin. 
(2) Do these steps to clean the area where the placard will be installed (Fig. 1): 
(a) Use a lint-free cloth moist with water or white spirit to clean the surface 
where the placard (1) will be installed. 
(b) Dry the area with a dry, lint-free cloth. 
(3) Install the placard (1) on the stretcher beam (2). 
NOTE: The placard is self-adhesive. 
(4) Close all access panels and doors that you opened.  
Reference Item 
Local Supply Lint-free cloth 
Local Supply White spirit

### Page 9 (OCR)

ASB-21-006  aerolite
SERVICE BULLETIN
B
1(0.04)_
INB  SB-21-006-1-0
Figure 1 Stretcher Unit Modification
Page 9
MAR 16/2021

### Page 10

ASB-21-006 
SERVICE BULLETIN 
Page 10 
MAR 16/2021 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INTENTIONALLY LEFT BLANK

### Page 11

ASB-21-006 
SERVICE BULLETIN 
Page 11 
MAR 16/2021 
 
4. Implementation Confirmation 
Please confirm the implementation of this service bulletin by completing the table below and 
sending it by fax or email to: 
Aerolite AG 
Aumühlestrasse 10 
6373 Ennetbürgen 
Switzerland 
 
Tel: +41 41 624 58 58 
Fax: +41 41 624 58 59 
Email:  office.airworthiness@aerolite.ch 
 
ASB-21-006 
Aircraft Serial 
Number 
Date of 
Embodiment Company Signature / Stamp

### Page 12

ASB-21-006 
SERVICE BULLETIN 
Page 12 
MAR 16/2021 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INTENTIONALLY LEFT BLANK

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
