# Airbus Canada Service Bulletin BD500-282021: No revision named

- Rights: © Airbus Canada Limited Partnership. Filed by the FAA in regulations.gov docket FAA-2025-5024, the docket of AD 2026-10-12. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Airbus Canada Service Bulletin BD500-282021](https://openairdocs.org/service-documents/airbus-canada/bd500-282021.md)
- Title as filed: BD500-282021_001
- Pages: 80
- PDF: https://openairdocs.org/files/sha256/72/4c/724cac2e754402c62453b8f9737e4c40f31ade83231198732c043a1f878a868d
- Page: https://openairdocs.org/service-documents/airbus-canada/bd500-282021/file/724cac2e7544

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

BD500-282021
 
PART A - Replacement of the Saddle Clamp
of the Motive Flow Tube at Rib 5 of the Left
Wing - Accomplishment instruction
BD500-282021
Issue No. 001.00
Copyright © Airbus Canada Limited Partnership
All rights reserved. No part of this work may be reproduced or copied in any form or by any means without written permission of Airbus
Canada Limited Partnership.
The Airbus and A220 logos are registered trademarks of Airbus Canada Limited Partnership.
The information, technical data and the designs disclosed herein are the exclusive property of Airbus Canada Limited Partnership or contain
proprietary rights of others and are not to be used or disclosed to others without the written consent of Airbus Canada Limited Partnership. The
recipient of this document, by its retention and use, agrees to hold in confidence the technical data and designs contained herein. The foregoing
shall not apply to persons having proprietary rights to such information, technical data or such designs to the extent that such rights exist.
Publication No.:
Manufacturer:
Airbus Canada Limited Partnership
Customer Services
13100 Henri-Fabre Blvd.
Mirabel, Quebec J7H 3C6
  Page  1
2025/01/27

### Page 2

Intentionally left blank
  Page  2
2025/01/27

### Page 3

BD500-282021
Fuel - Distribution - Replacement of the Saddle Clamp of the Motive
Flow Tube at Rib 5 of the Left and Right Wings - Service Bulletin
References
Table 1 References
Data Module/Technical Publication Title
BD500-A-J28-20-21-01AAA-933A-A PART A - Replacement of the Saddle Clamp of
the Motive Flow Tube at Rib 5 of the Left Wing -
Accomplishment instruction
BD500-A-J28-20-21-01AAA-934A-A Replacement of the Saddle Clamp of the Motive Flow
Tube at Rib 5 of the Left and Right Wings - Material
information
BD500-A-J28-20-21-02AAA-933A-A PART B - Replacement of the Saddle Clamp of
the Motive Flow Tube at Rib 5 of the Right Wing -
Accomplishment instruction
Service Bulletin
Common information
THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS
LEASED AIRCRAFT, SEND THE SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR
HAS SOLD AIRCRAFT OR TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND
THIS SERVICE BULLETIN TO THE NEW OWNER, UNLESS CONFIRMATION WAS
RECEIVED THAT AIRBUS HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION
LIST.
Management information
Compliance category: Recommended (Service bulletin recommended to be accomplished to
prevent significant operational disruptions)
Task category: Inspection and repair
Original issue date: 2025-01-27
Impact list
Impact (Maintenance publications):
Refer to the Documentation affected section of the Planning Information section.
Accomplishment limits
Time compliance: Basic limit
Remarks:
Refer to the Compliance section of the Planning Information section.
Replacement service bulletin
None
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
 2025-01-27 Page  3

### Page 4

BD500-282021
Revision information
Initial issue
Summary
Applicability
BD-500-1A10, Aircraft 50010 thru 50018 and 50020 thru 50069
BD-500-1A11, Aircraft 55003 thru 55016, 55018 thru 55240, and 55242 thru 55253
Reason
It is possible that damage can occur to the motive flow fuel-feed tubes at the bonded saddle
clamp locations. The damage to the motive flow fuel-feed tubes can cause fuel imbalance and
feed ejector issues.
Description
This service bulletin is divided into two parts: PART A and PART B.
PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left
Wing
The aircraft is put in standard configuration for maintenance. The Spirit AeroSystems Belfast
Service Bulletin 500SHW-28-2112 is done on the left wing.
PART B - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Right
Wing
The aircraft is put in standard configuration for maintenance. The Spirit AeroSystems Belfast
Service Bulletin 500SHW-28-2112 is done on the right wing.
Concurrent requirements
None
Manpower
It will take an estimated 1.00 h to complete PART A of this service bulletin.
Note
This estimate does not include the man-hours necessary to do Spirit AeroSystems Service
Bulletin 500SHW-28-2112.
It will take an estimated 1.00 h to complete PART B of this service bulletin.
Note
This estimate does not include the man-hours necessary to do Spirit AeroSystems Service
Bulletin 500SHW-28-2112.
Material information
BD500-A-J28-20-21-01AAA-934A-A
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
 2025-01-27 Page  4

### Page 5

BD500-282021
Planning information
Applicability
Aircraft affected:
AIRCRAFT MODEL SERVICE AIRCRAFT SERIAL
NUMBER
PRODUCTION AIRCRAFT
SERIAL NUMBERS
BD-500-1A10 50010 thru 50018 and 50020
thru 50069
50070 and subsequent serial
numbers 1
BD-500-1A11 55003 thru 55016, 55018 thru
55240, 55242 thru 55253
55241, 55254 and subsequent
serial numbers 1
1 Aircraft will have an equivalent modification incorporated before delivery.
Note
The instructions in this service bulletin are only applicable to the systems and parts
installed at the time of delivery of the aircraft or as changed by Airbus Service Bulletins.
Before you do this service bulletin, examine all Supplemental Type Certificates (STCs),
Supplemental Type Approvals (STAs), or equivalent action changes to make sure that you
can complete this service bulletin.
Reason
Problem and effect
It is possible that damage can occur to the motive flow fuel-feed tubes at the bonded saddle
clamp locations. The damage to the motive flow fuel-feed tubes can cause fuel imbalance and
feed ejector issues.
Objective/Solution
This service bulletin gives the instruction to do Spirit Aerosystems Belfast Service Bulletin
500SHW-28-2112 to inspect the motive flow fuel-feed tubes and replace the saddle clamp.
Description
This service bulletin is divided into two parts: PART A and PART B.
PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left
Wing
The aircraft is put in standard configuration for maintenance. The Spirit Aerosystems Belfast
Service Bulletin 500SHW-28-2112 is done on the left wing.
PART B - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Right
Wing
The aircraft is put in standard configuration for maintenance. The Spirit Aerosystems Belfast
Service Bulletin 500SHW-28-2112 is done on the right wing.
Compliance
Recommended Service Bulletin
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
 2025-01-27 Page  5

### Page 6

BD500-282021
Airbus recommends that PART A and PART B of this service bulletin be done at no more than
9800 flight hours from the release date of this service bulletin, unless otherwise directed by the
airworthiness authority of the operator.
Note
If it is not possible to complete all the instructions in this service bulletin because of
the configuration of the aircraft, speak with a CRC representative at 1 866 A220 CRC
(1-866-222-0272) or 1-450-476-7676 or e-mail at a220crc@airbus.com for analysis and to
get an approved disposition to complete this service bulletin.
Note
This service bulletin does not affect Airworthiness Limitations Items (ALIs) or Damage
Tolerance Inspections (DTIs).
Concurrent requirements
None
Approval
The technical content of this service bulletin has been approved under the authority of the
TCCA Design Approval Organization No: DAO #19-Q-02.
Manpower
The man-hours given below are estimates for direct labor done by an experienced crew on an
aircraft prepared for maintenance.
These estimates do not include the time necessary for:
‐ Administrative functions such as planning, liaising, familiarization, and report writing.
‐ Non-productive elapsed time such as rest time, having meals, and crew shift changes.
‐ Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.
‐ Preparation for modification (unless specified in the Accomplishment Instructions) such as
cleaning and getting parts, tools, consumables, and ground equipment.
‐ Quality assurance inspections, troubleshooting and/or correction of discrepancies found
when a task is done.
‐ All other activities that are not considered by Airbus as directly related to the
accomplishment of this procedure.
It will take an estimated 1.00 h to complete PART A of this service bulletin. The man-hours
are divided as shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.50 h
Procedure 0.00 h
Test 0.00 h
Job Close-Up 0.50 h
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
 2025-01-27 Page  6

### Page 7

BD500-282021
Note
These estimates do not include the man-hours necessary to do Spirit AeroSystems Service
Bulletin 500SHW-28-2112.
It will take an estimated 1.00 h to complete PART B of this service bulletin. The man-hours
are divided as shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.50 h
Procedure 0.00 h
Test 0.00 h
Job Close-Up 0.50 h
Note
These estimates do not include the man-hours necessary to do Spirit AeroSystems Service
Bulletin 500SHW-28-2112.
Weight and balance
Not changed
Electrical load data
Not changed
Referenced documentation
Refer to the SB Introduction document BD500-000000 for definition or explanation of service
bulletin content.
For Airbus reference only: Restriction and/or Special Instruction (RSI) C-500-000-28-0045,
Revision B
Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112, dated July 24, 2024
For Airbus reference only: PCR 62754
Documentation affected
1 Maintenance Publications
Illustrated Parts Data Publication (IPDP)
2 Operational Publications
None
Industry support information
This service bulletin is part of an AIRBUS monitored retrofit campaign. For detailed information,
please refer to Retrofit Information Letter (RIL) S28M24000735. To organize this retrofit, please
contact AIRBUS retrofit management department at: a220monitored.retrofit@airbus.com.
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
 2025-01-27 Page  7

### Page 8

BD500-282021
Material information
BD500-A-J28-20-21-01AAA-934A-A
Accomplishment instructions
PART A BD500-A-J28-20-21-01AAA-933A-A
PART B BD500-A-J28-20-21-02AAA-933A-A
Additional information
None
See applicability on the first page of the DM
BD500-A-J28-20-21-00AAA-930A-A (001)
BD500-A-J28-20-21-00AAA-930A-A (001)
End of data module
 2025-01-27 Page  8

### Page 9

BD500-282021
Replacement of the Saddle Clamp of the Motive Flow Tube
at Rib 5 of the Left and Right Wings - Material information
References
Table 1 References
Data Module/Technical Publication Title
None
Service Bulletin
Material set list
None
Support equipment list
There is no support equipment for this service bulletin.
Supplies list
For a list of supplies, refer to the different tasks and the Spirit AeroSystems Belfast Service
Bulletin that are given as references in this service bulletin.
Spares list
The spare sets in the table that follows are available from Satair:
Note
Spare set BD500282021K350 and BD500282021K351 are required. One set of each per
aircraft.
Spare set BD500282021K352 and BD500282021K353 are only required if the fuel tubes
are damaged and need to be replaced. One set of each per aircraft.
For PART A
Spare set: Kit BD500282021K350
Name: Kit, Fuel System, Motive Flow, Left Wing
Part number
[Mfg. code]
Name Quantity Remarks
500SHW282112K1
[K4585]
KIT, Wing Spare Set, Left
Side
1 [1]
Procurement information:
Price information: $352.00
Availability: 226 days (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained thru
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-934A-A (001)
BD500-A-J28-20-21-01AAA-934A-A (001)
 2025-01-27 Page  9

### Page 10

BD500-282021
Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:
spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.
For PART B
Spare set: Kit BD500282021K351
Name: Kit, Fuel System, Motive Flow, Right Wing
Part number
[Mfg. code]
Name Quantity Remarks
500SHW282112K2
[K4585]
KIT, Wing Spare Set, Right
Side
1 [1]
Procurement information:
Price information: $352.00
Availability: 226 days (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained thru
Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:
spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.
For PART A
Spare set: Kit BD500282021K352
Name: Kit, Fuel System, Motive Flow, Left Wing
Part number
[Mfg. code]
Name Quantity Remarks
500SHW282109K1
[K4585]
Kit, Fuel System, Motive
Flow, Left Wing
1 [1]
Procurement information:
Price information: $2560.00
Availability: 276 days (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained thru
Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:
spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.
For PART B
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-934A-A (001)
BD500-A-J28-20-21-01AAA-934A-A (001)
 2025-01-27 Page  10

### Page 11

BD500-282021
Spare set: Kit BD500282021K353
Name: Kit, Fuel System, Motive Flow, Right Wing
Part number
[Mfg. code]
Name Quantity Remarks
500SHW282109K2
[K4585]
KIT, Wing Spare Set, Right
Side
1 [1]
Procurement information:
Price information: $2570.00
Availability: 276 days (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained thru
Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:
spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.
Procurement address:
Name: For customers based in the Americas
Business unit:
Business unit name: Satair USA, Inc
525 Westpark Drive, Suite 400
Peachtree City, GA  30269
United States of America
Ph.: 1 404 675 6333
Please contact your Customer Order Specialist
https:/www.satair.com/market/search
CPHSB7X
Name: For customers based in Europe, Middle East, Africa
Business unit:
Business unit name: Satair A/S
Amager Landevej 147A
2770 Kastrup
Denmark
Ph.: 45 3247 0100
Please contact your Customer Order Specialist
https:/www.satair.com/market/search
CPHSB7X
Name: For customers based in the Asia Pacific (excluding mainland China)
Business unit:
Business unit name: Satair Pte Ltd
12 Seletar Aerospace Link
Singapore  797553
The Republic of Singapore
Ph.: 65 6543 0977
Please contact your Customer Order Specialist
https:/www.satair.com/market/search
CPHSB7X
Name: For customers based in mainland China
Business unit:
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-934A-A (001)
BD500-A-J28-20-21-01AAA-934A-A (001)
 2025-01-27 Page  11

### Page 12

BD500-282021
Business unit name: Satair (Beijing) Co. Ltd
Tian Zhu Lu 8, Tianzhu Airport Industrial Zone
Beijing  101312
People’s Republic of China
Ph.: 86 10 8048 6161
Please contact your Customer Order Specialist
https:/www.satair.com/market/search
CPHSB7X
1
1: Footnote remarks.
Spare set BD500282021K350 includes Spirit AeroSystems Belfast Service Bulletin spare set
500SHW282112K1 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.
Spare set BD500282021K351 includes Spirit AeroSystems Belfast Service Bulletin spares set
500SHW282112K2 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.
Spare set BD500282021K352 includes Spirit AeroSystems Belfast Service Bulletin spares set
500SHW282109K1 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.
Spare set BD500282021K353 includes Spirit AeroSystems Belfast Service Bulletin spares set
500SHW282109K2 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.
For a list of the contents of the spare sets, refer to Spirit AeroSystems Belfast Service Bulletin
500SHW-28-2112.
Removed spares list
For a list of removed spares, refer to the Spirit AeroSystems Belfast Service Bulletin
500SHW-28-2112 that is given as reference in this service bulletin.
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-934A-A (001)
BD500-A-J28-20-21-01AAA-934A-A (001)
End of data module
 2025-01-27 Page  12

### Page 13

BD500-282021
PART A - Replacement of the Saddle Clamp of the Motive Flow
Tube at Rib 5 of the Left Wing - Accomplishment instruction
References
Table 1 References
Data Module/Technical Publication Title
BD500-A-J12-00-00-01AAA-398A-A Standard configuration for maintenance - Aircraft system
configuration
BD500-A-J28-20-21-01AAA-910B-A 500SHW-28-2112 - Spirit AeroSystems Belfast
Preliminary requirements
Required conditions
Table 2  Required conditions
Action/Condition Data Module/Technical publication
None
Support equipment
Table 3  Support equipment
Name Identification/Reference Quantity Remark
None
Consumables, materials, and expendables
Table 4  Consumables, materials, and expendables
Name Identification/Reference Quantity Remark
None
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-933A-A (001)
BD500-A-J28-20-21-01AAA-933A-A (001)
 2025-01-27 Page  13

### Page 14

BD500-282021
Spares
Table 5  Spares
Name Identification/Reference Quantity Remark
None
Safety conditions
None
Procedure
1 Job set-up
Note
The steps in the Job set-up section of this service bulletin are recommended
steps. The steps give a recommendation to get access to the work area. This
recommendation is to give a safe work area and to minimize possible damage to
surrounding aircraft parts. Alternative steps can be used at the discretion of the
operator.
1.1 Make sure that the aircraft is in standard configuration for maintenance (refer to
AMP BD500-A-J12-00-00-01AAA-398A-A).
2 Procedure
2.1 If it is not possible to complete all the instructions in this service bulletin
because of the configuration of the aircraft, speak with a CRC representative
at 1 866 A220 CRC (1-866-222-0272) or 1-450-476-7676 or e-mail at
a220crc@airbus.com for analysis and to get an approved disposition to complete
this service bulletin.
2.2 Do the Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112 on the left
wing (refer to BD500-A-J28-20-21-01AAA-910B-A).
3 Job close-up
Note
The steps in the Job close-up section of this service bulletin, except for the
return-to-service tests, are recommended steps. The steps give a recommendation
to install components removed during the Job set-up. This recommendation is
to make sure that the aircraft is safe and ready to return to service. Alternative
steps can be used at the discretion of the operator.
3.1 Remove all tools, equipment, and unwanted materials from the work area.
4 Administrative
When PART A of this service bulletin is completed, record in the applicable aircraft
records that you have completed PART A of this service bulletin.
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-933A-A (001)
BD500-A-J28-20-21-01AAA-933A-A (001)
 2025-01-27 Page  14

### Page 15

BD500-282021
Requirements after job completion
Required conditions
Table 6  Required conditions
Action/Condition Data Module/Technical publication
None
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-933A-A (001)
BD500-A-J28-20-21-01AAA-933A-A (001)
End of data module
 2025-01-27 Page  15

### Page 16

BD500-282021
Intentionally left blank
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-933A-A (001)
BD500-A-J28-20-21-01AAA-933A-A (001)
 2025-01-27 Page  16

### Page 17

BD500-282021
PART B - Replacement of the Saddle Clamp of the Motive Flow
Tube at Rib 5 of the Right Wing - Accomplishment instruction
References
Table 1 References
Data Module/Technical Publication Title
BD500-A-J12-00-00-01AAA-398A-A Standard configuration for maintenance - Aircraft system
configuration
BD500-A-J28-20-21-01AAA-910B-A 500SHW-28-2112 - Spirit AeroSystems Belfast
Preliminary requirements
Required conditions
Table 2  Required conditions
Action/Condition Data Module/Technical publication
None
Support equipment
Table 3  Support equipment
Name Identification/Reference Quantity Remark
None
Consumables, materials, and expendables
Table 4  Consumables, materials, and expendables
Name Identification/Reference Quantity Remark
None
See applicability on the first page of the DM
BD500-A-J28-20-21-02AAA-933A-A (001)
BD500-A-J28-20-21-02AAA-933A-A (001)
 2025-01-27 Page  17

### Page 18

BD500-282021
Spares
Table 5  Spares
Name Identification/Reference Quantity Remark
None
Safety conditions
None
Procedure
1 Job set-up
Note
The steps in the Job set-up section of this service bulletin are recommended
steps. The steps give a recommendation to get access to the work area. This
recommendation is to give a safe work area and to minimize possible damage to
surrounding aircraft parts. Alternative steps can be used at the discretion of the
operator.
1.1 Make sure that the aircraft is in standard configuration for maintenance (refer to
AMP BD500-A-J12-00-00-01AAA-398A-A).
2 Procedure
2.1 If it is not possible to complete all the instructions in this service bulletin
because of the configuration of the aircraft, speak with a CRC representative
at 1 866 A220 CRC (1-866-222-0272) or 1-450-476-7676 or e-mail at
a220crc@airbus.com for analysis and to get an approved disposition to complete
this service bulletin.
2.2 Do the Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112 on the right
wing (refer to BD500-A-J28-20-21-01AAA-910B-A).
3 Job close-up
Note
The steps in the Job close-up section of this service bulletin, except for the
return-to-service tests, are recommended steps. The steps give a recommendation
to install components removed during the Job set-up. This recommendation is
to make sure that the aircraft is safe and ready to return to service. Alternative
steps can be used at the discretion of the operator.
3.1 Remove all tools, equipment, and unwanted materials from the work area.
4 Administrative
When PART B of this service bulletin is completed, record in the applicable aircraft
records that you have completed PART B of this service bulletin.
See applicability on the first page of the DM
BD500-A-J28-20-21-02AAA-933A-A (001)
BD500-A-J28-20-21-02AAA-933A-A (001)
 2025-01-27 Page  18

### Page 19

BD500-282021
Requirements after job completion
Required conditions
Table 6  Required conditions
Action/Condition Data Module/Technical publication
None
See applicability on the first page of the DM
BD500-A-J28-20-21-02AAA-933A-A (001)
BD500-A-J28-20-21-02AAA-933A-A (001)
End of data module
 2025-01-27 Page  19

### Page 20

BD500-282021
Intentionally left blank
See applicability on the first page of the DM
BD500-A-J28-20-21-02AAA-933A-A (001)
BD500-A-J28-20-21-02AAA-933A-A (001)
 2025-01-27 Page  20

### Page 21

BD500-282021
500SHW-28-2112 - Spirit AeroSystems Belfast
References
Table 1 References
Data Module/Technical Publication Title
None
Description
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  21

### Page 22

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  22

### Page 23

BD500-282021
 
Spirit AeroSystems Belfast 
Customer Services 
Airport Road 
Belfast 
BT3 9DZ 
N. Ireland 
www.mro.spiritaero.com 
 
_________________________________________________________________________________________ 
 
 J
uly 24, 2024        Page 1
 
 
A220 Service Bulletin  
 
____________________________________________________________________________________________ 
 
 
 
Service Bulletin  
Fuel – Fuel Feed System –  
Replacement of the motive flow saddle clamp 
 
 
 
 
 
 
 
 
500SHW-28-2112 
Issue No. 001 
 
 
Applicability: Aircraft BD-500-1A10, 50010 – 50018 and 50020 – 50069 
   Aircraft BD-500-1A11, 55003 – 55016, 55018 – 55240 and  
   55242 – 55253 
 
 
 
_________________________________________________________________________________ 
 
 
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  23

### Page 24

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  24

### Page 25

BD500-282021
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Intentionally left blank 
  
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 2
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  25

### Page 26

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  26

### Page 27

BD500-282021
 
 
 
 
 
 
 
  
 
 
  
 
Table of contents 
 
The listed documents are included in issue 001, dated July 24 2024, of this publication
 
Document title Data module code Issue date Applicable to 
    
Fuel Feed System – Replacement of 
the motive flow saddle clamp – 
Service Bulletin 
BD500-SA-28-21-85-01AAA-930A-A 2024-0 7-24 50010 – 50018 
50020 – 50069 
55003 – 55016 
55018 – 55240 
55242 – 55253
Replacement of the motive flow 
saddle clamp – Accomplishment 
Instruction – PART A (Left side 
wing)
BD500-SA -28-21-85-01AAA-933A-A 2024-0 7-24 50010 – 50018 
50020 – 50069 
55003 – 55016 
55018 – 55240 
55242 – 55253
Replacement of the motive flow 
saddle clamp – Accomplishment 
Instruction – PART B (right side 
wing) 
BD500-SA -28-21-85-02AAA-933A-A 2024-0 7-24 50010 – 50018 
50020 – 50069 
55003 – 55016 
55018 – 55240 
55242 – 55253
Replacement of the motive flow 
saddle clamp – Material Information
BD500-SA -28-21-85-01AAA-934A-A 2024-0 7-24 50010 – 50018 
50020 – 50069 
55003 – 55016 
55018 – 55240 
55242 – 55253
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 3
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  27

### Page 28

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  28

### Page 29

BD500-282021
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Intentionally left blank 
 
 
 
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 4
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  29

### Page 30

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  30

### Page 31

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-930A-A Replacement
ofthemotiveflowsaddleclamp
Service bulletin
TableofContentsPage 
Servicebulletin.....................................................................................................................1
References...........................................................................................................................1
RevisionInformation..............................................................................................................1
Summary..............................................................................................................................1
PlanningInformation.............................................................................................................2
MaterialInformation..............................................................................................................5
AccomplishmentInstructions..................................................................................................5
AdditionalInformation............................................................................................................5List
ofTablesPage 
1 References........................................................................................................1References
T
able 1 References
Datamodule/Technicalpublication Title
BD500-SA-28-21-85-01AAA-934A-A Replacementofthemotiveflowsaddleclamp–
MaterialInformation
BD500-SA-28-21-85-01AAA-933A-A Replacementofthemotiveflowsaddleclamp–
AccomplishmentInstruction-PARTA(Leftside
wing)
BD500-SA-28-21-85-02AAA-933A-A Replacementofthemotiveflowsaddleclamp–
AccomplishmentInstruction-PARTB(Rightside
wing)Service
Bulletin
Revision InformationNot
applicable.
SummaryApplicability
BD-500–1A10,Aircraft50010thru50018and50020thru50069
BD-500–1A11,Aircraft55003thru55016,55018thru55240and55242thru55253.P
age1
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 5
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  31

### Page 32

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  32

### Page 33

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-930A-A 
ForAircraftBD-500-1A10,50010–50018and50020–50057andAircraftBD-500-1A11,55003–55016,
55018–55088and55090–55104:
SpiritServiceBulletin500SHW-28-2109(AirbusServiceBulletinBD500-282015)mustbedonepriorto,or
concurrentlywiththisServiceBulletin.
Reason
Thebondedsaddleclampthatattachesthemotiveflowlinetotheoutboardfaceofrib5cancausedamageto
themotiveflowtube.Ifleftunchecked,thesaddleclampcouldperforatethetubeandcauseafuelimbalance
andfailureoftheejectorpump.
Thisservicebulletinprovidesinstructionstoremovethesaddleclampandtodoaninspectionofthemotive
flowtube.Ifdamageisfound,instructionsareprovidedtorepairthemotiveflowtubeorreplacethemotive
flowline.Thebondedsaddleclampisreplacedwithanewcushionedsaddleclamp.
Description
Theaccesspanelsareremoved.Thebondedsaddleclampisremovedandaninspectionofthemotiveflow
tubeisdone.Ifdamageisfoundthenthemotiveflowtubeisrepairedorthemotiveflowlineisreplaced
betweentheejectorpump(atRib5)andtheisolator(atRib7).Thebondedsaddleclampisreplacedwitha
cushionedsaddleclamp.Theaccesspanelsareinstalled.
Compliance
RecommendedServiceBulletin
RefertotheAirbusservicebulletinfortimelimitation.
Manpower
Itwilltakeanestimated2.0hourperwingtocompletethisservicebulletin.
Industrysupportinformation
RefertotheAirbusservicebulletinforIndustrysupportinformation.
Materialinformation
RefertoBD500-SA-28-21-85-01AAA-934A-AReplacementofthemotiveflowsaddleclamp–Material
Information.
Planning Information
Applicability
Aircraftaffected:
AIRCRAFTMODEL SERVICEAIRCRAFTSERIAL
NUMBERS
PRODUCTIONAIRCRAFT
SERIALNUMBERS
BD-500–1A10 50010thru50018,50020thru
500695
0070andsubsequent.1P
age2
Concurrentrequirements
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 6
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  33

### Page 34

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  34

### Page 35

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-930A-A 
BD-500–1A11 55003thru55016,55018thru
55240,55242thru5525355
241,55254andsubsequent. 1
1 Aircraftwillhaveanequivalentmodificationincorporatedbeforedelivery
Note
Theinstructionsinthisservicebulletinareonlyapplicabletothesystemsandpartsinstalledatthetimeof
deliveryoftheaircraftoraschangedbyAirbusServiceBulletins.Beforeyoudothisservicebulletin,
examineallSupplementalTypeCertificates(STCs),SupplementalTypeApprovals(STAs),orequivalent
actionchangestomakesureyoucancompletethisservicebulletin.
Reason
Problemandeffect
Thebondedsaddleclampthatattachesthemotiveflowlinetotheoutboardfaceofrib5cancausedamageto
themotiveflowtube.Ifleftunchecked,thesaddleclampcouldperforatethetubeandcauseafuelimbalance
andfailureoftheejectorpump.
Objective/Solution
Thisservicebulletinprovidesinstructionstoremovethesaddleclampandtodoaninspectionofthemotive
flowtube.Ifdamageisfound,instructionsareprovidedtorepairthemotiveflowtubeorreplacethemotive
flowline.Thebondedsaddleclampisreplacedwithanewcushionedsaddleclamp.Thenewcushioned
saddlewillpreventdamagetothemotiveflowtube.
Description
- Theaccesspanelisremoved.
- Thebondedsaddleclampisremoved.
- Aninspectionofthemotiveflowtubeisdone.
• Ifthereislightpainterosiononly(nobaremetalcanbeseen),thepaintisre-appliedtothetube.
• Ifbaremetalcanbeseen,themotiveflowlineisreplacedbetweentheejectorpump(atRib5)and
theisolator(atRib7).
- Thebondedsaddleclampisreplacedwithacushionedsaddleclamp.
- Theaccesspanelisinstalled.
Compliance
RecommendedServiceBulletin
RefertotheAirbusservicebulletinfortimelimitation.
Concurrentrequirements
ForAircraftBD-500-1A10,50010–50018and50020–50057andAircraftBD-500-1A11,55003–55016,
55018–55088and55090–55104:
SpiritServiceBulletin500SHW-28-2109(AirbusServiceBulletinBD500-282015)mustbedonepriorto,or
concurrentlywiththisServiceBulletin.P
age3
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 7
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  35

### Page 36

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  36

### Page 37

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-930A-A 
Page4
ThetechnicalcontentofthisServiceBulletinhasbeenreviewedandacceptedbyAirbus.
Manpower
Theman-hoursgivenbelowareestimatesfordirectlabordonebyanexperiencedcrewonanaircraft
preparedformaintenance.
Theseestimatesdonotincludethetimenecessaryfor:
- Administrativefunctionssuchasplanning,liaising,familiarization,andreportwriting.
- Non-productiveelapsedtimesuchasresttime,havingmeals,andcrewshiftchanges.
- Elapsedtimesuchasforpainttodry,sealanttocure,andfueltankventing.
- Preparationformodification(unlessspecifiedintheAccomplishmentInstructions)suchascleaningand
gettingparts,tools,consumables,andgroundequipment.
- Qualityassuranceinspections,troubleshootingand/orcorrectionofdiscrepanciesfoundwhenataskis
done.
- AllotheractivitiesthatarenotconsideredbyAirbusasdirectlyrelatedtotheaccomplishmentofthis
procedure.
Itwilltakeanestimated2.0hoursperwingtocompletethisservicebulletin.
Theman-hoursforthisservicebulletinareshowninthetablethatfollows:-
TASK MAN-HOURS
(1)JobSet-Up 0.5
(2)Procedure 1.0
(3)Close-Up 0.5
Weightandbalance
RefertotheAirbusservicebulletin.
Electricalloaddata
Notchanged.
ReferencedDocumentation
RefertotheSBIntroductiondocumentfordefinitionorexplanationofservicebulletincontent.
AircraftMaintenancePublication(AMP).
AircraftStructuralRepairPublication(ASRP).
ModificationSummarySHW500T104804.
AirbusServiceBulletinBD500-282015.
SpiritServiceBulletin500SHW-28–2109.
Approval
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 8
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  37

### Page 38

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  38

### Page 39

BD500-282021A
pplicableto:All BD500-SA-28-21-85-01AAA-930A-A
Page5
None.
2.OperationalPublications
None.Ind
ustrysupportinformation
RefertotheAirbusservicebulletinforIndustrysupportinformation.
Material Information
RefertoBD500-SA-28-21-85-01AAA-934A-AReplacementofthemotiveflowsaddleclamp–Material
Information.
Accomplishment Instructions
RefertoBD500-SA-28-21-85-01AAA-933A-AReplacementofthemotiveflowsaddleclamp–
AccomplishmentInstruction-PARTA(Leftsidewing).
RefertoBD500-SA-28-21-85-02AAA-933A-AReplacementofthemotiveflowsaddleclamp–
AccomplishmentInstruction-PARTB(Rightsidewing).
Additional Information
Noinformation
DocumentationAffected
1.MaintenancePublications
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 9
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  39

### Page 40

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  40

### Page 41

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-933A-A Replacement
of the motive flow saddle clamp
Accomplishment procedure - PART A (Left side wing)
Table of ContentsPage 
Accomplishmentprocedure-PARTA(Leftsidewing)..............................................................1
References...........................................................................................................................1
PreliminaryRequirements......................................................................................................3
Procedure............................................................................................................................3
1 Jobset-up.........................................................................................................3
2 Procedure.........................................................................................................4
3 Jobclose-out.....................................................................................................6
Requirementsafterjobcompletion.........................................................................................6List
of TablesPage 
1 References........................................................................................................1
2 RequiredConditions...........................................................................................3
3 SupportEquipment............................................................................................3
4 Consumables,Materials,andExpendables..........................................................3
5 Spares..............................................................................................................3
6 RequiredConditions...........................................................................................6References
T
able1 References
Data module/Technical publication Title
BD500-A-J12-00-00-01AAA-398A-A StandardConfigurationforMaintenance–Aircraft
systemconfiguration
BD500-A-J24-00-00-01AAA-913G-A Electrical/electronicsafetyprecautions–General
maintenancesafetyprocedure
BD500-A-J28-00-00-00AAA-913G-A Fuelsafetyprecautions–Generalmaintenance
safetyprocedure
BD500-A-J28-11-01-02AAA-520A-A Lowerwingfuelaccesspanels–Removeprocedure
BD500-A-J57-22-32-01AAA-520A-A Accesspanels(541AZ/641AZ,541BZ/641BZ),
collectortank–Removeprocedure
BD500-A-J51-13-06-00AAA-913A-A AlterationstoCriticalDesignConfigurationControl
Limitations(CDCCL)–Generalmaintenance
procedure
BD500-A-J00-00-00-10AAA-028A-A Limitofvalidity–General
BD500-A-J51-00-90-01AAA-018A-A Visualinspection–Introduction
BD500-A-J20-31-00-00AAA-711A-A Torquingofthreadedfasteners–TightenprocedureP
age1
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 10
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  41

### Page 42

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  42

### Page 43

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-933A-A 
Page 2T
able1 References (Continued)
Data module/Technical publication Title
BD500-A-J51-21-16-00AAA-030A-A FinishCodes–Technicaldata
BD500-A-J28-21-85-01AAA-520A-A Motiveflowtubeswing–Removeprocedure
BD500-A-J28-21-85-01AAA-720A-A Motiveflowtubeswing–Installprocedure
BD500-A-J57-22-32-01AAA-720A-A Accesspanels(541AZ/641AZ,541BZ/641BZ),
collectortank–Installprocedure
BD500-A-J28-11-01-02AAA-720A-A Lowerwingfuelaccesspanels–Installprocedure
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 11
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  43

### Page 44

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  44

### Page 45

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-933A-A Preliminary
Requirements
Required ConditionsT
able2 RequiredConditions
Action/Condition Data module/Technical publications
NoneSupport
EquipmentT
able3 SupportEquipment
Name
Identification/
Reference Quantity Remark
NoneConsumables,
Materials, and ExpendablesT
able4 Consumables,Materials,andExpendables
Name Identification/Reference Quantity Remark
NoneSpares
T
able5 Spares
Name
Identification/
Reference Quantity Remark
NoneSafety
ConditionsNone
Procedure
1 Job set-upNote
ThestepsintheJobSet-Upsectionofthisservicebulletinarerecommendedsteps.The
stepsgivearecommendationtogetaccesstotheworkarea.Thisrecommendationistogive
asafeworkareaandtominimizepossibledamagetosurroundingaircraftparts.P
age3
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 12
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  45

### Page 46

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  46

### Page 47

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-933A-A 
Page 41.1
Makesurethattheaircraftisinthestandardconfigurationformaintenance(referto
AMPBD500-A-J12-00-00-01AAA-398A-AStandardConfigurationforMaintenance
–Aircraftsystemconfiguration).
1.2 Obeyalltheelectrical/electronicsafetyprecautions(refertoAMPBD500-A-J24-00-
00-01AAA-913G-AElectrical/electronicsafetyprecautions–Generalmaintenance
safetyprocedure).
1.3 Obeyallthefuelsafetyprecautions(refertoAMPBD500-A-J28-00-00-00AAA-
913G-AFuelsafetyprecautions–Generalmaintenancesafetyprocedure).
1.4 Removethefuelaccesspanel(1)(541CB/641CB)(refertoAMPBD500-A-J28-11-
01-02AAA-520A-ALowerwingfuelaccesspanels–Removeprocedure).Referto
Figure1sheet1.
1.5 Removetheinboardaccesspanel(2)(refertoAMPBD500-A-J57-22-32-01AAA-
520A-AAccesspanels(541AZ/641AZ,541BZ/641BZ),collectortank–Remove
procedure).2
Procedure2.1
Ifitisnotpossibletocompletealltheinstructionsinthisservicebulletinbecauseof
theconfigurationoftheaircraft,speakwithaCRCrepresentativeat1-866-A220-
CRC(1-866-222-0272)or1-450-476-7676ore-mailatA220_crc@abc.airbusfor
analysisandtogetanapproveddispositiontocompletethisservicebulletin.W
ARNINGS•
Fuel plumbing systems are designed with electrical bonding features, including
bonding clamps, self-bonding couplings, conductive fittings and components with
interfaces. These design features are classified as critical design configuration
control limitation (CDCCL) items. The integrity of these critical design features must
be maintained to ensure that unsafe conditions do not develop through maintenance.
• CDCCLs identify the critical design processes and features (example: wiring
separation, fastener type, sealant applications, and surface preparation) which
prevent development of ignition sources and/or increased flammability within the fuel
tank system. For general guidance for continuing airworthiness of the aircraft Critical
Design Configuration Control Limitations (CDCCL), operators must consult the data
module and its referenced documentation when addressing alterations to CDCCL
items. Refer to the ASRP BD500-A-J51-13-06-00AAA-913A-A .
• Do not modify, and take care not to damage, any structural item or system component
in the fuel tank boundary. All items in the fuel tank boundary, with plumbing lines,
high resistance isolators, high resistance PEEK brackets, self-bonding couplings,
saddle clamps, electrical bonding features, applied sealant, surface treatments, and
installed fuel tank components are likely to have features that are classified as Critical
Design Configuration Control Limitation (CDCCL) items. Such features give
protection for the occurrence of a fuel tank ignition source associated with
electrostatic discharge and/or lightning strike. Damage or modification to CDCCL
items can possibly deteriorate or eliminate these necessary protection features.
Note
AlistofCriticalDesignConfigurationControlLimitations(CDCCL)itemsis
publishedintheAirworthinessLimitations(AWL).RefertotheBD500-A-J00-
00-00-10AAA-028A-A.
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 13
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  47

### Page 48

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  48

### Page 49

BD500-282021Applicable
to:AllBD500-SA-28-21-85-01AAA-933A-A 
Page 52.2
Removethetwoscrews(5)andthetwowashers(6)toreleasethesaddleclamp(7)
fromthefueltube(1)andthebracket(ref).RefertoFigure1sheet2andsheet3.
2.3 Removethesaddleclamp(7).
2.4 Discardthetwowashers(6)andthesaddleclamp(7).
2.5 Atthelocationwherethesaddleclamp(7)supportsthefueltube(1),doavisual
inspectionofthefueltube(1)fordamage(refertotheANDTPBD500-A-J51-00-90-
01AAA-018A-AVisualinspection–Introduction).
2.6 Ifthereisnodamagetothefueltube(1),dothestepsthatfollow:
2.6.1 Attachthenewsaddleclamp(7)tothefueltube(1)andinstalltothe
bracket(ref)withthetwoscrews(5)andthetwonewwashers(6).
RefertoFigure1sheet3.
Note
Dryinstallthescrews(5).
2.6.2 Torquethescrewsto20-25in-lbs(2.26-2.82Nm)(refertoAMP
BD500-A-J20-31-00-00AAA-711A-ATorquingofthreadedfasteners–
Tightenprocedure).
Note
Makesurethatyoudonotpre-loadthefueltube.
2.6.3 Removeallunwantedmaterialfromthereworkarea.
2.6.4 Goto‘JobClose-out’.
2.7 Onthefueltube(1),ifthereisdamagetothepaintonly(withnobaremetalvisible),
dothestepsthatfollow:
2.7.1 ApplyfinishcodeX075tothefueltube(1)(refertoASRPBD500-A-
J51-21-16-00AAA-030A-AFinishCodes–Technicaldata).
2.7.2 Attachthenewsaddleclamp(7)tothefueltube(1)andinstalltothe
bracket(ref)withthetwoscrews(5)andthetwonewwashers(6).
RefertoFigure1sheet3.
Note
Dryinstallthescrews(5).
2.7.3 Torquethescrewsto20-25in-lbs(2.26-2.82Nm)(refertoAMP
BD500-A-J20-31-00-00AAA-711A-A).
Note
Makesurethatyoudonotpre-loadthefueltube.
2.7.4 Removeallunwantedmaterialfromthereworkarea.
2.7.5 Goto‘JobClose-out’.
2.8 Onthefueltube(1),ifthereisdamageandbaremetalisexposed,dothefollowing
steps:
2.8.1 Removethefueltubes(1),(2)and(3)(refertoAMPBD500-A-J28-21-
85-01AAA-520A-AMotiveflowtubeswing–Removeprocedure).Refer
toFigure1sheet2.
2.8.2 Usethenewsaddleclamp(7)andthetwonewwashers(6)andinstall
thefueltubes(1),(2)and(3)(refertoAMPBD500-A-J28-21-85-
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 14
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  49

### Page 50

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  50

### Page 51

BD500-282021A
pplicableto:All BD500-SA-28-21-85-01AAA-933A-A
Page 601AAA-720A-A
Motiveflowtubeswing–Installprocedure).Referto
Figure1sheet2andsheet3.
Note
Makesurethatyoudonotpre-loadthefueltubes.
2.8.3 Goto‘JobClose-out’.3
Job close-outNote
ThestepsintheJobClose-Outsectionofthisservicebulletin,exceptforthereturn-to-
servicetests,arerecommendedsteps.Thestepsgivearecommendationtoinstall
componentsremovedduringtheJobSet-Up.Thisrecommendationistomakesurethatthe
aircraftissafeandreadytoreturntoservice.Alternativestepscanbeusedatthediscretion
oftheoperator.
3.1 Installtheaccesspanel(2)(refertoAMPBD500-A-J57-22-32-01AAA-720A-A
Accesspanels(541AZ/641AZ,541BZ/641BZ),collectortank–Installprocedure).
RefertoFigure1sheet1.
3.2 Installthelowerwingfuelaccesspanel(1)(541CB/641CB)(refertoAMPBD500-A-
J28-11-01-02AAA-720A-ALowerwingfuelaccesspanels–Installprocedure).
3.3 Removealltools,equipment,andunwantedmaterialsfromtheworkarea.
3.4 RecordintheAircraftlogbookthatServiceBulletin500SHW-28-2112,Issue001,
Replacementofthemotiveflowsaddleclamp-PARTA(Leftsidewing)hasbeen
incorporated.Requirements
after job completion
Required ConditionsT
able6 RequiredConditions
Action/Condition Data module/Technical publications
None
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 15
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  51

### Page 52

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  52

### Page 53

BD500-282021Applicable
to:AllBD500-SA-28-21-85-02AAA-933A-A Replacement
of the motive flow saddle clamp
Accomplishment procedure - PART B (Right side wing)
Table of ContentsPage 
Accomplishmentprocedure-PARTB(Rightsidewing)............................................................1
References...........................................................................................................................1
PreliminaryRequirements......................................................................................................3
Procedure............................................................................................................................3
1 Jobset-up.........................................................................................................3
2 Procedure.........................................................................................................4
3 Jobclose-out.....................................................................................................6
Requirementsafterjobcompletion.......................................................................................10List
of TablesPage 
1 References........................................................................................................1
2 RequiredConditions...........................................................................................3
3 SupportEquipment............................................................................................3
4 Consumables,Materials,andExpendables..........................................................3
5 Spares..............................................................................................................3
6 RequiredConditions.........................................................................................10List
of FiguresPage 
1 Replacementofthefuelfeedsaddleclamp(Sheet1of3).....................................7
1 Replacementofthefuelfeedsaddleclamp(Sheet2of3).....................................8
1 Replacementofthefuelfeedsaddleclamp(Sheet3of3).....................................9References
T
able1 References
Data module/Technical publication Title
BD500-A-J12-00-00-01AAA-398A-A StandardConfigurationforMaintenance–Aircraft
systemconfiguration
BD500-A-J24-00-00-01AAA-913G-A Electrical/electronicsafetyprecautions–General
maintenancesafetyprocedure
BD500-A-J28-00-00-00AAA-913G-A Fuelsafetyprecautions–Generalmaintenance
safetyprocedure
BD500-A-J28-11-01-02AAA-520A-A Lowerwingfuelaccesspanels–Removeprocedure
BD500-A-J57-22-32-01AAA-520A-A Accesspanels(541AZ/641AZ,541BZ/641BZ),
collectortank–Removeprocedure
BD500-A-J51-13-06-00AAA-913A-A AlterationstoCriticalDesignConfigurationControl
Limitations(CDCCL)–Generalmaintenance
procedurePag
e1
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 16
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  53

### Page 54

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  54

### Page 55

BD500-282021Applicable
to:AllBD500-SA-28-21-85-02AAA-933A-A T
able1 References (Continued)
Data module/Technical publication Title
BD500-A-J00-00-00-10AAA-028A-A Limitofvalidity–General
BD500-A-J51-00-90-01AAA-018A-A Visualinspection–Introduction
BD500-A-J20-31-00-00AAA-711A-A Torquingofthreadedfasteners–Tightenprocedure
BD500-A-J51-21-16-00AAA-030A-A FinishCodes–Technicaldata
BD500-A-J28-21-85-01AAA-520A-A Motiveflowtubeswing–Removeprocedure
BD500-A-J28-21-85-01AAA-720A-A Motiveflowtubeswing–Installprocedure
BD500-A-J57-22-32-01AAA-720A-A Accesspanels(541AZ/641AZ,541BZ/641BZ),
collectortank–Installprocedure
BD500-A-J28-11-01-02AAA-720A-A Lowerwingfuelaccesspanels–InstallprocedurePag
e2
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 17
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  55

### Page 56

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  56

### Page 57

BD500-282021Applicable
to:AllBD500-SA-28-21-85-02AAA-933A-A Preliminary
Requirements
Required ConditionsT
able2 RequiredConditions
Action/Condition Data module/Technical publications
NoneSupport
EquipmentT
able3 SupportEquipment
Name
Identification/
Reference Quantity Remark
NoneConsumables,
Materials, and ExpendablesT
able4 Consumables,Materials,andExpendables
Name Identification/Reference Quantity Remark
NoneSpares
T
able5 Spares
Name
Identification/
Reference Quantity Remark
NoneSafety
ConditionsNone
Procedure
1 Job set-upNote
ThestepsintheJobSet-Upsectionofthisservicebulletinarerecommendedsteps.The
stepsgivearecommendationtogetaccesstotheworkarea.Thisrecommendationistogive
asafeworkareaandtominimizepossibledamagetosurroundingaircraftparts.Pag
e3
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 18
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  57

### Page 58

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  58

### Page 59

BD500-282021Applicable
to:AllBD500-SA-28-21-85-02AAA-933A-A 
Page 41.1
Makesurethattheaircraftisinthestandardconfigurationformaintenance(referto
AMPBD500-A-J12-00-00-01AAA-398A-AStandardConfigurationforMaintenance
–Aircraftsystemconfiguration).
1.2 Obeyalltheelectrical/electronicsafetyprecautions(refertoAMPBD500-A-J24-00-
00-01AAA-913G-AElectrical/electronicsafetyprecautions–Generalmaintenance
safetyprocedure).
1.3 Obeyallthefuelsafetyprecautions(refertoAMPBD500-A-J28-00-00-00AAA-
913G-AFuelsafetyprecautions–Generalmaintenancesafetyprocedure).
1.4 Removethefuelaccesspanel(1)(541CB/641CB)(refertoAMPBD500-A-J28-11-
01-02AAA-520A-ALowerwingfuelaccesspanels–Removeprocedure).Referto
Figure1sheet1.
1.5 Removetheinboardaccesspanel(2)(refertoAMPBD500-A-J57-22-32-01AAA-
520A-AAccesspanels(541AZ/641AZ,541BZ/641BZ),collectortank–Remove
procedure).2
Procedure2.1
Ifitisnotpossibletocompletealltheinstructionsinthisservicebulletinbecauseof
theconfigurationoftheaircraft,speakwithaCRCrepresentativeat1-866-A220-
CRC(1-866-222-0272)or1-450-476-7676ore-mailatA220_crc@abc.airbusfor
analysisandtogetanapproveddispositiontocompletethisservicebulletin.W
ARNINGS•
Fuel plumbing systems are designed with electrical bonding features, including
bonding clamps, self-bonding couplings, conductive fittings and components with
interfaces. These design features are classified as critical design configuration
control limitation (CDCCL) items. The integrity of these critical design features must
be maintained to ensure that unsafe conditions do not develop through maintenance.
• CDCCLs identify the critical design processes and features (example: wiring
separation, fastener type, sealant applications, and surface preparation) which
prevent development of ignition sources and/or increased flammability within the fuel
tank system. For general guidance for continuing airworthiness of the aircraft Critical
Design Configuration Control Limitations (CDCCL), operators must consult the data
module and its referenced documentation when addressing alterations to CDCCL
items. Refer to the ASRP BD500-A-J51-13-06-00AAA-913A-A .
• Do not modify, and take care not to damage, any structural item or system component
in the fuel tank boundary. All items in the fuel tank boundary, with plumbing lines,
high resistance isolators, high resistance PEEK brackets, self-bonding couplings,
saddle clamps, electrical bonding features, applied sealant, surface treatments, and
installed fuel tank components are likely to have features that are classified as Critical
Design Configuration Control Limitation (CDCCL) items. Such features give
protection for the occurrence of a fuel tank ignition source associated with
electrostatic discharge and/or lightning strike. Damage or modification to CDCCL
items can possibly deteriorate or eliminate these necessary protection features.
Note
AlistofCriticalDesignConfigurationControlLimitations(CDCCL)itemsis
publishedintheAirworthinessLimitations(AWL).RefertotheBD500-A-J00-
00-00-10AAA-028A-A.
Service Bulletin 500SHW-28-2112
July 24, 2024
Sevice Bulletin 500SHW-28-2112
 Page 19
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  59

### Page 60

BD500-282021
See applicability on the first page of the DM
BD500-A-J28-20-21-01AAA-910B-A (001)
BD500-A-J28-20-21-01AAA-910B-A (001)
 2025-01-27 Page  60

The text continues at https://openairdocs.org/service-documents/airbus-canada/bd500-282021/file/724cac2e7544.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
