# Airbus Helicopters Emergency Alert Service Bulletin 05A017

## Copies (6)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 7 ("Airbus Helicopters EASB No_ 05A017 Rev 7"), 16 pages: PDF https://openairdocs.org/files/sha256/3d/d7/3dd7828f981a6255326f4c2d0f426b4997dd2eb9484ab2f6f115281806112fe0; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/3dd7828f981a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1182; AD 2021-09-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 2 ("Airbus EASB 05A017 Rev 2"), 12 pages: PDF https://openairdocs.org/files/sha256/20/74/2074bb35db91ba33b6026d76b0e2d6d94418985901aa9eac5b35588f46245744; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/2074bb35db91.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-3970; AD 2016-08-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 2 ("U.S. DOT/FAA - Eurocopter EASB No 05A017 rev2"), 12 pages: PDF https://openairdocs.org/files/sha256/af/5b/af5b2d519be472410169fc6669f1179e0ec8d9b1109d049b63c59e9318916d4d; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/af5b2d519be4.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0501; AD 2014-02-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 2 ("U.S. DOT/FAA - Eurocopter Emergency Alert Service Bulletin No. 05A017"), 20 pages: PDF https://openairdocs.org/files/sha256/59/a4/59a4790a1bdd471fbca09f62c12b8a30f9ddd729f990a34dda38f5fc53c08c30; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/59a4790a1bdd.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0005; AD 2012-01-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 3 ("U.S. DOT/FAA - Eurocopter ASB 05A017"), 19 pages: PDF https://openairdocs.org/files/sha256/20/9d/209d3069913a4f666b12ffb20beb2cb2b56890f12d4d900c982a0dabc52025c2; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/209d3069913a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0307; AD 2013-07-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- U.S. DOT/FAA - Airbus EASB No 05A017 Rev 0 ("U.S. DOT/FAA - Airbus EASB No 05A017 Rev 0"), 10 pages: PDF https://openairdocs.org/files/sha256/98/20/982068d414c9120c06a2a4c89962798735f77fc2955601c57a4101b6e9f8ee86; text https://openairdocs.org/service-documents/airbus-helicopters/05a017/file/982068d414c9.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0515; AD 2014-12-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 05A017
- Latest revision known: 05A017, Revision 7, dated March 21, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/05a017

## ADs that cite it (7) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-09-05](https://openairdocs.org/ad/2021-09-05.md), effective Jun 2, 2021: Revision 7
- [AD 2016-08-20](https://openairdocs.org/ad/2016-08-20.md), effective Jun 6, 2016: Revision 2
- [AD 2014-12-51](https://openairdocs.org/ad/2014-12-51.md), effective Aug 20, 2014: No revision named
- [AD 2014-02-04](https://openairdocs.org/ad/2014-02-04.md), effective Mar 7, 2014: Revision 2
- [AD 2013-07-06](https://openairdocs.org/ad/2013-07-06.md), effective May 6, 2013: Revision 3

All 7: https://openairdocs.org/service-documents/airbus-helicopters/05a017/ads.md

Also cited in [3 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/05a017/proposed.md).

## Text (16 pages)

Revision 7, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1182; AD 2021-09-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  EASB
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
FUSELAGE
Check of the tail boom / Fenestron junction frame
ATA: 53
For the attention of
AIRCRAFT  Version (S)
NUMBER
CONCERNED  Civil  Military
EC130  05A017  B4, T2
Revision No.  Date of issue
Revision O  2014-06-06
Revision 1  2014-06-13
Revision 2  2015-02-20
Revision 3  2016-03-07
Revision 4  2016-11-30
Revision 5  2017-04-21
Revision 6  2017-05-03
Revision 7  2018-03-21
Summary:
Visual check for cracks on the tail boom / Fenestron junction frame.
Reason for last Revision:
The purpose of Revision 7 is to cancel the instructions of this ALERT SERVICE BULLETIN for helicopters on which
modification 074775 was embodied.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2014-06-06  Page 1/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  EASB
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment
EC130 B4 and T2 helicopters on which modification 074775 (Reinforcement of the EC130 Fenestron frame
by installing 4 carbon patches) was not embodied.
NOTE 1
Refer to the aircraft Individual Inspection Log Book (RIC
AMS) to identify the actual modification status of the
helicopter.
NOTE 2
Modification 074775 is proposed as a retrofit through
Service Bulletin No. 53-036.
1.A.2. Non-installed equipment
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
On the EC130 B4 tail boom / Fenestron junction frame, two cases of cracks were found in a new area of the
tail boom / Fenestron junction frame during non-scheduled inspections.
Examination revealed that the crack initiated in the radius between the web and the flange on the tail cone
side, in the lower RH part of the tail boom / Fenestron junction frame (Detail A, Figure 1).
It spread rapidly, following the radius along the web of the tail boom / Fenestron junction frame.
The cracks are of considerable length and no deterioration is visible from outside the helicopter.
The inspection of this area which can reveal these cracks is scheduled at the "600 hours // 2 years"
inspection.
Information Notice (IN) No. 2167-1-53 was issued on June 15, 2010 to specify the applicable maintenance.
Considering the cases encountered in service, this periodicity is unsuitable.
In these conditions and under high tail rotor thrust load, the resistance margins of this junction may be
insufficient.
Consequently, Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory. Its
purpose is to enable a detailed visual check from inside the tail boom.
Revision 0 2014-06-06  Page 2/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  EASB
Revision 1:
The purpose of Revision 1 is to refer to the flying hours logged by the tail boom / Fenestron junction frame
instead of the flying hours logged by the helicopter, in paragraph 1.E.2.
Revision 2:
Compliance with the previous revisions of this ALERT SERVICE BULLETIN required an inspection from
inside the tail boom, with or without removal of the stabilizer.
As this inspection from inside can be complex, the purpose of Revision 2 of this ALERT SERVICE
BULLETIN is to propose an alternative inspection from outside the tail boom, which is possible following
compliance with Service Bulletin No. 53-029, and to define who is allowed to perform the different checks.
Furthermore, a follow-up in sling cycles has been added for helicopters which carry out external load carrying
operations.
Revision 3:
Following investigation, Airbus Helicopters hereby informs you that the time limit for inspecting the tail boom /
Fenestron junction frame increases from 700 to 1200 flying hours.
As a result, tail booms which have logged between 700 and 1200 flying hours from receipt of revision 3 of
this ALERT SERVICE BULLETIN are no longer concerned by the directives of this ALERT SERVICE
BULLETIN until the frame has logged 1200 flying hours.
Consequently, Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory, its
purpose being to facilitate a visual detailed check of the tail boom / Fenestron junction frame from 1200 flying
hours logged by the tail boom / Fenestron junction frame.
Revision 4:
Following a new case of crack in the tail boom / Fenestron junction frame, Airbus Helicopters suspects that
the belated detection of the crack is due to incorrect cleaning of the area.
Therefore, the purpose of Revision 4 of this ALERT SERVICE BULLETIN is to make the periodic cleaning of
the area to be inspected on the tail boom / Fenestron junction frame, from inside the tail boom, mandatory.
Revision 5:
Following a new case of crack in the tail boom / Fenestron junction frame, which was detected during
compliance with this ALERT SERVICE BULLETIN at 1200 flying hours, Airbus Helicopters has decided to
reduce the inspection interval, pending analysis and examination of this new case.
Therefore, the purpose of Revision 5 of this ALERT SERVICE BULLETIN is to reduce the time limit for first
compliance with this inspection to 350 flying hours.
Revision 6:
The purpose of Revision 6 is to make it mandatory to inspect the tail boom / Fenestron junction frame from
inside the tail boom every 660 flying hours on helicopters on which Service Bulletin No. 53-029 was complied
with.
Revision 7:
The purpose of Revision 7 of this ALERT SERVICE BULLETIN is:
- to inform operators that the embodiment of modification 074775 cancels the instructions of this ALERT
SERVICE BULLETIN,
- to modify compliance with paragraph 1.E.2. by requesting the embodiment of modification 074775 through
Service Bulletin No. 53-036 before 31/12/2022.
Revision 0 2014-06-06  Page 3/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  EASB
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN consists in checking that there are no cracks on the tail
boom / Fenestron junction frame.
1.E. COMPLIANCE
1.E.1. Compliance at the works
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment:
a) For helicopters which do not yet comply with this ALERT SERVICE BULLETIN and are equipped
with a tail boom/Fenestron junction frame which has logged less than 325 flying hours:
1) Which do not comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.5. then 3.B.1. at the latest upon reaching 350 flying hours,
Then,
Comply with paragraph 3.B.1. or 3.B.2. at intervals not exceeding 25 flying hours or 390 cycles - See
NOTE 4 (first time limit reached).
And,
Comply with paragraph 3.B.5. then 3.B.1. at intervals not exceeding 150 flying hours.
Or,
2) Which comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.3. at the latest upon reaching 350 flying hours,
Then,
Comply with paragraph 3.B.3. at intervals not exceeding 10 flying hours or 250 cycles - See NOTE 4
(first time limit reached).
And,
Comply with paragraphs 3.B.5. then 3.B.1. at intervals not exceeding 660 flying hours.
b) For helicopters which do not yet comply with this ALERT SERVICE BULLETIN and are equipped
with a tail boom/Fenestron junction frame which has logged between 325 and 675 flying hours:
1) Which do not comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.5. then 3.B.1. within 25 flying hours following receipt of Revision 5, issued
on the date indicated at the bottom of the page,
Then,
Comply with paragraph 3.B.1. or 3.B.2. at intervals not exceeding 25 flying hours or 390 cycles since
the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. and 3.B.1. at intervals not exceeding 150 flying hours.
Or,
Revision 0  2014-06-06  Page 4/16
Revision 7  2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  EASB
2) Which comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.3. within 10 flying hours, then at intervals not exceeding 10 flying hours
or 250 cycles since the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. then 3.B.1. at intervals not exceeding 660 flying hours.
c) For helicopters which do not yet comply with this ALERT SERVICE BULLETIN and are equipped
with a tail boom/Fenestron junction frame which has logged between 675 and 690 flying hours:
1)  Which do not comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.5. then 3.B.1. at the latest upon reaching 700 flying hours,
Then,
Comply with paragraph 3.B.1. or 3.B.2. at intervals not exceeding 25 flying hours or 390 cycles since
the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. and 3.B.1. at intervals not exceeding 150 flying hours.
Or,
2) Which comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.3. within 10 flying hours, then at intervals not exceeding 10 flying hours
or 250 cycles since the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. then 3.B.1. at intervals not exceeding 660 flying hours.
For helicopters which do not comply with this ALERT SERVICE BULLETIN or are equipped with a
tail boom/Fenestron junction frame which has logged more than 690 flying hours:
1) Which do not comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.5. then 3.B.1. within 10 flying hours following receipt of Revision 5, issued
on the date indicated at the bottom of the page,
Then,
Comply with paragraph 3.B.1. or 3.B.2. at intervals not exceeding 25 flying hours or 390 cycles since
the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. and 3.B.1. at intervals not exceeding 150 flying hours.
Or,
2) Which comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.3. within 10 flying hours, then at intervals not exceeding 10 flying hours
or 250 cycles since the latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. then 3.B.1. at intervals not exceeding 660 flying hours.
Revision 0 2014-06-06  Page 5/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  EASB
e) For helicopters which already comply with this ALERT SERVICE BULLETIN:
1) Which do not comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.1. or 3.B.2. at intervals not exceeding 25 flying hours or 390 cycles since
latest inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. and 3.B.1. at intervals not exceeding 150 flying hours.
Or,
2) Which comply with Service Bulletin No. 53-029 (See NOTE 3)
Comply with paragraph 3.B.3. at intervals not exceeding 10 flying hours or 250 cycles since latest
inspection - See NOTE 4 (first time limit reached).
And,
Comply with paragraphs 3.B.5. then 3.B.1. at intervals not exceeding 660 flying hours.
NOTE 3
The purpose of SB No. 53-029 is to cut out the splice and
skin at the tail boom/Fenestron junction frame, in order to
facilitate the periodic inspection in this ALERT SERVICE
BULLETIN.
NOTE 4
Counting cycles:
1 landing with or without stopping the rotor = 1 cycle
1 external load transportation operation = 1 cycle
f) For all helicopters:
1) On which modification 074609 (Reinforcement of the Fenestron/tail boom link) was not embodied
Comply with Service Bulletin No. 53-036 (Modification 074775) before 31/12/2022.
2) On which modification 074609 (Reinforcement of the Fenestron/tail boom link) was embodied
Contact your usual Customer Logistics Manager (CLM) to define the conditions for embodiment of
modification 074775 before 31/12/2022.
Non-installed equipment: Not applicable.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Revision 0 2014-06-06  Page 6/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  EASB
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on June 06, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on June 13, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved
on February 20, 2015 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters
of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 3 was approved
on March 02, 2016 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 4 was approved
on November 30, 2016 under the authority of EASA Design Organization Approval No. 21J.700 for civil
version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 5 was approved
on April 21, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 6 was approved
on May 02, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 7 was approved
on March 20, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualifications:
Qualification:
- 1 Technician to comply with paragraphs 3.B.1., 3.B.2., 3.B.3. (a) and (b) and 3.B.5.
Or,
- 1 Pilot to comply with paragraph 3.B.3.(a).
Or,
- 1 Person appropriately trained and certified, in accordance with the local regulations in force, to comply with
paragraphs 3.B.2., 3.B.3.(a) and (b).
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: approximately 1 hour to comply with paragraph 3.B.1. (with removal of the
stabilizer)
approximately 30 minutes to comply with paragraph 3.B.2. (without removal of the
stabilizer)
approximately 10 minutes to comply with paragraph 3.B.3.
approximately 1 hour to clean the frame (paragraph 3.B.5.) with removal of the
stabilizer
Revision 0 2014-06-06  Page 7/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  EASB
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD
Not applicable.
1.K. REFERENCES
Aircraft Maintenance Manual (AMM):
AMM: 55-11-00,4-1: Removal/Installation - Horizontal stabilizer
Standard Practices Manual (MTC):
- MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft
- MTC: 20.02.09.101: Crack detection through dye-penetrant inspection: General
- MTC: 20.02.09.601: Checking structural parts/components using the dye-penetrant procedure
1.L. DOCUMENTS AFFECTED
Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not applicable.
Revision 0 2014-06-06  Page 8/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  EASB
2.  MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
Not applicable.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT
Products to be ordered separately:
As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:
Designation  Qty  Product P/N  CM  Item
MEK cleaning agent  ALD  METHYL ETHYL KETONE  CM217
The products can be ordered separately from the KLX AEROSPACE SOLUTIONS company.
Website:  https://www.klxaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
2.D. MATERIAL TO BE RETURNED
Not applicable.
Revision 0 2014-06-06  Page 9/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  EASB
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL
NOTE 1
Contact details of the Airbus Helicopters Customer Service
Technical Support Department:
Fax: +33 (0)4.42.85.99.66.
E-mail: support.technical-airframe.ah@airbus.com
Keycopter: Technical Request Management
3.B. OPERATIONAL PROCEDURE
3.B.1. Inspection of the tail boom / Fenestron junction frame from inside the tail boom with removal of the
stabilizer
As per Figures 1 and 3:
- Remove the horizontal stabilizer as per AMM Task 55-11-00,4-1.
- If necessary, clean the area to be checked defined in Figure 1 of the junction frame (a)
(see detail A and cross-section B-B) as per MTC Work Card 20.04.01.102.
NOTE 2
For this inspection, the surface of the frame must be clean.
- Check that there are no cracks on the web of the frame (a) and in the radius between the web and the
flange on the tail cone side. Pay particular attention to the area around the 4 spars (b). (See Detail C)
. If in doubt, perform a local non-destructive inspection of the inspection area (e.g. dye-penetrant
inspection as per MTC Work Cards 20.02.09.101 and 20.02.09.601).
Then interpret the results as per paragraph 3.B.4.
3.B.2. Inspection of the tail boom / Fenestron junction frame from inside the tail boom without removal of the
stabilizer
As per Figures 2 and 3:
NOTE 3
For this inspection, the surface of the frame must be clean.
- Using a borescope through the stabilizer opening, check that there are no cracks on the web of the
frame (a) and in the radius between the web and the flange on the tail cone side. Pay particular attention to
the area around the 4 spars (b). (See Detail C):
. If in doubt, perform a local non-destructive inspection of the inspection area (e.g. dye-penetrant inspection
as per MTC Work Cards 20.02.09.101 and 20.02.09.601).
Then interpret the results as per paragraph 3.B.4.
Revision 0 2014-06-06  Page 10/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  EASB
3.B.3. Inspection of the tail boom / Fenestron junction frame from outside the tail boom
NOTE 4
This inspection can only be performed following compliance
with Service Bulletin No. 53-029.
As per Figure 4:
a) Check that there are no cracks on frame (a) in the area of the skin cut-outs (upper and lower RH side,
upper and lower LH side) (See Detail A - Figure 4).
Only the RH side is shown in Figure 4. The LH side is identical.
b) If in doubt, perform a local non-destructive inspection of the inspection area (e.g. dye-penetrant
inspection as per MTC Work Cards 20.02.09.101 and 20.02.09.601).
CAUTION
THIS CHECK MUST BE PERFORMED IN AN
UNPAINTED, CLEAN AREA.
Then interpret the results as per paragraph 3.B.4.
3.B.4. Interpretation of the results
a) If there are no cracks:
• Leave as is.
If previously removed, install the horizontal stabilizer as per AMM Task 55-11-00,4-1.
. Resume flights.
b) If any cracks are found:
Before resuming flights:
. Contact Airbus Helicopters to define the conditions for returning the helicopter to conformity
(refer to NOTE 1).
3.B.5. Cleaning of the tail boom / Fenestron junction frame from inside the frame
- Remove the horizontal stabilizer as per AMM Task 55-11-00,4-1.
- Clean junction frame (a) (Figure 1) using a white clean and lint-free cloth soaked with liquid MEK (METHYL
ETHYL KETONE)
Then,
Comply with paragraph 3.B.1.
Revision 0 2014-06-06  Page 11/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS
HELICOPTERS  EASB
3.C. IDENTIFICATION
Identification of this document:
Record first compliance with this ALERT SERVICE BULLETIN in the helicopter documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2014-06-06  Page 12/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS
HELICOPTERS  EASB
Cross-section
B-B
Fenestron
DETAIL A - View looking afte
Tail boom
DETAIL C
Figure 1
Check of the frame with removal of the stabilizer
Revision 0 2014-06-06  Page 13/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 14 (OCR)

AIRBUS
HELICOPTERS  EASB
Borescope insertion
Cross-section
B-B
Fenestron
b  DETAIL A - View looking aft
Tail boom
DETAIL C
C
Figure 2
Check of the frame without removal of the stabilizer
Revision 0  2014-06-06  Page 14/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 15 (OCR)

AIRBUS
HELICOPTERS  EASB
Example of a
crack
Example of a
crack
Figure 3
Examples of cracks
Revision 0 2014-06-06  Page 15/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 16 (OCR)

AIRBUS
HELICOPTERS  EASB
Only the RH side is
shown.
The LH side is
identical to the RH
side.
Cut-out following compliance
with SB No. 53-029
Schematic representation of
a crack with skin cut-out
Figure 4
Check of the frame from outside
Revision 0 2014-06-06  Page 16/16
Revision 7 2018-03-21  This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
