# Airbus Helicopters Emergency Alert Service Bulletin 05A020

## Copies (4)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 3 ("Airbus Emergency ASB 05A020 Rev 3"), 12 pages: PDF https://openairdocs.org/files/sha256/d9/b1/d9b158b587a95474fbbaa666c97d14aeb8b086d31b8ef6c644350f7eb6a911cd; text https://openairdocs.org/service-documents/airbus-helicopters/05a020/file/d9b158b587a9.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0922; AD 2025-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 2 ("Airbus Helicopters EASB No. 05A020 Rev 2"), 12 pages: PDF https://openairdocs.org/files/sha256/05/34/0534a7f151e89614a9c50f137bf659e3103b5e4d44db8f01d04453d374047838; text https://openairdocs.org/service-documents/airbus-helicopters/05a020/file/0534a7f151e8.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0872; AD 2021-26-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("Airbus Helicopter Emergency ASB 05A020 Rev 1"), 11 pages: PDF https://openairdocs.org/files/sha256/37/d1/37d149a730a39a78d8faba3603698742fc2db837366185426bf8e39d82e2fc6e; text https://openairdocs.org/service-documents/airbus-helicopters/05a020/file/37d149a730a3.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0455; AD 2020-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- U.S. DOT/FAA - EASB EC130T2 05A020 ("U.S. DOT/FAA - EASB EC130T2 05A020"), 11 pages: PDF https://openairdocs.org/files/sha256/5f/96/5f960e29e17997b5007e6b3216b49e12864c12ec68be6ddad77f27dd0b9d3172; text https://openairdocs.org/service-documents/airbus-helicopters/05a020/file/5f960e29e179.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-0133; AD 2014-22-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 05A020
- Latest revision known: 05A020, Revision 3, dated September 19, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/05a020

## ADs that cite it (4) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-20-10](https://openairdocs.org/ad/2025-20-10.md), effective Dec 30, 2025: Revision 3
- [AD 2021-26-07](https://openairdocs.org/ad/2021-26-07.md), effective Jan 27, 2022: Revision 2
- [AD 2020-11-05](https://openairdocs.org/ad/2020-11-05.md), effective Jun 8, 2020: Revision 1
- [AD 2014-22-51](https://openairdocs.org/ad/2014-22-51.md), effective Feb 25, 2015: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/05a020/proposed.md).

## Text (12 pages)

Revision 3, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0922; AD 2025-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TIME LIMITS - MAINTENANCE CHECKS - Tail Rotor Hub
Check of the tail rotor hub body
ATA 64
For the attention of
HELICOPTER  Version(s)
NUMBER
CONCERNED  Civil  Military
EC120  05A020  B
Revision No.  Date of issue
Revision 0  2019-10-29
Revision 1  2019-11-08
Revision 2  2021-02-08
Revision 3  2024-09-19
Summary:
During an inspection, Airbus Helicopters was informed of a case of loss of tightening torque on several attachment
bolts of the tail rotor hub body.
Following analysis, Airbus Helicopters came to the conclusion that a non-detected case of loss of tightening torque
can cause the development of cracks and lead to the loss of the tail rotor drive, which results in the loss of control
of the helicopter.
Consequently, Airbus Helicopters makes it mandatory to periodically check for cracks on the tail rotor hub body and
to replace components of the hub body / splined flange link every 1000 hours (+100-hour margin) to avoid checking
the tightening torque during this period.
Reason for last Revision:
The purpose of revision 3 of this ALERT SERVICE BULLETIN is:
- To exclude from the effectivity the helicopters that have complied with ALERT SERVICE BULLETIN
No. 64-21-0001 "Added paint lines to each side of the assembly, hub body and splined tail rotor flange for visual
inspection of tightening torque" for "Helicopters/installed equipment or parts"
- To limit the effectivity for "Non installed equipment or parts"
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR
Revision 0 2019-10-29  Page 1/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
All EC120 helicopters which have not complied with ALERT SERVICE BULLETIN No. 64-21-0001.
1.A.2. Non-installed equipment or parts
Tail rotor hub body P/N C642A0100103 with a TSN greated than 0 flight hour and which have not complied
with this ALERT SERVICE BULLETIN No. 05A020.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
During an inspection, Airbus Helicopters was informed of a case of loss of tightening torque on several
attachment bolts of the tail rotor hub body.
Following analysis, Airbus Helicopters came to the conclusion that a non-detected case of loss of tightening
torque can cause the development of cracks and lead to the loss of the tail rotor drive, which results in the
loss of control of the helicopter.
Consequently, Airbus Helicopters makes it mandatory to periodically check for cracks on the tail rotor hub
body and to replace components of the hub body / splined flange link every 1000 hours (+100-hour margin)
to avoid checking the tightening torque during this period.
Revision 1:
The purpose of revision 1 is to change the periodic check for cracks on the tail rotor hub body from
every 15 FH without exceeding 7 days to every 15 FH.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with revision 0 of this ALERT
SERVICE BULLETIN.
Revision 2:
The purpose of revision 2 is to:
- inform that Task 64-21-00, 6-5 (AMM) that must be complied with is the one with date code 2020.10.15 or
any later date code,
- update the procedure of Task 64-21-00, 6-5 (AMM) to be complied with at intervals
of 1000 flight hours (+100-hour margin) (during replacement of the bolts, washers and nuts),
- specify that a100-hour margin is applicable to the 1000-hour inspection.
Revision 2 of this ALERT SERVICE BULLETIN does not affect compliance with the previous revisions of this
ALERT SERVICE BULLETIN.
Revision 3:
The purpose of revision 3 of this ALERT SERVICE BULLETIN is:
- To exclude from the effectivity the helicopters that have complied with ALERT SERVICE BULLETIN
No. 64-21-0001 "Added paint lines to each side of the assembly, hub body and splined tail rotor flange for
visual inspection of tightening torque" for "Helicopters/installed equipment or parts"
- To limit the effectivity for "Non installed equipment or parts"
Revision 3 of this ALERT SERVICE BULLETIN does not affect compliance with the previous revisions of this
ALERT SERVICE BULLETIN.
Revision 0 2019-10-29  Page 2/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists in:
- performing a check for cracks on the tail rotor hub body, in the zones defined in Figure 1,
- replacing the attachment bolts, washers and nuts of the tail rotor hub body,
- performing a check of the interface between the splined flange and the tail rotor hub body.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
The work on the helicopter and on non-installed equipment must be performed by the operator.
Helicopters/installed equipment or parts:
Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN within 15 flight hours (FH)
without exceeding 7 days from receipt of revision 0 of this ALERT SERVICE BULLETIN issued
on October 29, 2019.
And, interpret the results:
a) For helicopters with strictly less than 9000 FH
1) If no cracks are found:
- Continue flights, then,
- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do
not exceed 15 FH.
And,
- during the next 1000-hour (+100-hour margin) inspection (detailed check after disassembly of
the torsion spider assembly) without exceeding 9000 FH:
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
• perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.,
Then,
- during each 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the
torsion spider assembly) :
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
. perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.
Revision 0  2019-10-29  Page 3/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
2) If a crack is found:
CAUTION
DURING REPLACEMENT OF THE TAIL ROTOR
HUB BODY OR DURING THE DETAILED CHECK
AFTER DISASSEMBLY OF THE TORSION SPIDER
ASSEMBLY, THE BOLTS, WASHERS AND NUTS
OF THE TAIL ROTOR HUB BODY MUST BE
REPLACED WITH NEW BOLTS, WASHERS AND
NUTS.
- replace the tail rotor hub body and the bolts, washers and nuts as per paragraph 3.B.3.,
- perform the detailed check of the splined flange at the interface between the splined flange and the
tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange
as per paragraph 3.B.4.,
Then,
- comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do
not exceed 15 FH.
And,
- during each 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the
torsion spider assembly):
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
. perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.
b) For helicopters with 9000 FH or more
1) If no cracks are found:
If you know the number of flight hours of the attachment bolts (b) of the Tail Rotor Hub
If the bolts (b) have strictly less than 9000 FH
- during the next 1000-hour (+100-hour margin) inspection (detailed check after disassembly of
the torsion spider assembly) without exceeding 9000 FH:
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
• perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.,
Then,
- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do
not exceed 15 FH.
And,
at intervals that do not exceed 1000 FH (+100-hour margin):
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
. perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.
Revision O  2019-10-29  Page 4/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
If you do not know the number of flight hours of the attachment bolts (b) of the TRH or if the
bolts (b) have 9000 FH or more
- Replace the attachment bolts, washers and nuts of the tail rotor hub body within 15 flight hours
(FH) without exceeding 7 days from receipt of revision 0 of this ALERT SERVICE BULLETIN
issued on October 29, 2019.
Then,
- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do
not exceed 15 FH.
- at intervals that do not exceed 1000 FH (+100-hour margin) from the first replacement of the
bolts, washers and nuts:
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
• perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.
2) If a crack is found:
CAUTION
DURING REPLACEMENT OF THE TAIL ROTOR
HUB BODY OR DURING THE DETAILED CHECK
AFTER DISASSEMBLY OF THE TORSION SPIDER
ASSEMBLY, THE BOLTS, WASHERS AND NUTS
OF THE TAIL ROTOR HUB BODY MUST BE
REPLACED WITH NEW BOLTS, WASHERS AND
NUTS.
- replace the tail rotor hub body and the bolts, washers and nuts as per paragraph 3.B.3.,
- perform the detailed check of the splined flange at the interface between the splined flange and the
tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange
as per paragraph 3.B.4.,
- comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do
not exceed 15 FH.
- at intervals that do not exceed 1000 FH (+100-hour margin):
. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),
• perform the detailed check of the splined flange at the interface between the splined flange and
the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined
flange as per paragraph 3.B.4.
Non-installed equipment or parts:
Comply with paragraph 3.B.2. at the latest before installation on the helicopter.
Revision 0  2019-10-29  Page 5/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff
qualifications:
Qualification:  - 1 Mechanical Technician.
Or
- 1 Pilot appropriately trained and certified as per the local regulations in force.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter
configuration.
Estimated Man-hours: approximately 15 minutes to perform a visual check for cracks.
1.H. WEIGHT AND BALANCE
There is no change in weight and moment.
1.I. POWER CONSUMPTION
Not changed.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0 2019-10-29  Page 6/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN
Aircraft Maintenance Manual (AMM):
AMM: 64-21-00, 4-3: Tail Rotor Hub - Disassembly - Tail Rotor Hub
AMM: 64-21-00, 4-4: Tail Rotor Hub - Assembly - Tail Rotor Hub
AMM: 64-21-00, 6-4: Tail Rotor Hub - Detailed Check - Hub Body Assembly
AMM: 64-21-00, 6-8: Tail Rotor Hub - Detailed Check - Torsion Spider Assembly
Aircraft Maintenance Manual (AMM) issued with date code 2020.10.15 or any later date code:
AMM: 64-21-00, 6-5: Tail Rotor Hub - Detailed Check - Splined Flange
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Promotion Notice (SPN):
SPN: 3703-P-00: GENERAL - Foreign Object Damage prevention
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2019-10-29  Page 7/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction des Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Designation  Qty  New P/N  Item  P/N  Old  →  Instruction
Hub body  AR  C642A0100103  1  C642A0100103
Splined flange  AR  C642A0104202  2  C642A0104202
Equipment or parts to be ordered separately:
Designation  Qty  New P/N  Item  Old  P/N  →  Instruction
Hexagonal head bolt  AR  22201BE060008L  3  22201BE060008L
Washer  AR  ASNA0265-060  4  ASNA0265-060
Washer  AR  EN2138-06005  5  EN2138-06005
Nut  A/R  ASN52320BH060N  6  ASN52320BH060N
Revision 0  2019-10-29  Page 8/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
Consumables to be ordered separately:
As per the Tasks indicated in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you can't get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Designation  Qty  Tool P/N or equivalent  Item
Mirror  AR  Commercial  ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2019-10-29  Page 9/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECT DAMAGE (FOD). REFER TO
SAFETY  PROMOTION  NOTICE  (SPN)
NO. 3703-P-00.
3.B.1. Preliminary steps
- Remove the fairing plug (h).
- Remove the fairing (g) (Detail A, Figure 1).
- If necessary, release the rotor brake.
3.B.2. Inspection of the hub body (a) (Figure 1)
- Perform a visual inspection of the hub body (a), (Figure 1).
• Using a light source and, if necessary, a mirror (zz) (e.g. dentist's mirror), make sure that there are no
cracks in the hub body, in the inspection area defined as per Figure 1.
- Turn the tail rotor by hand to check the entire inspection area defined as per Figure 1.
- Interpret the results as per paragraph 1.E.2
3.B.3. Replacement of the hub body (a) (Figure 1)
- Remove and discard the hub body (a), (Figure 1) as per Task 64-21-00, 4-3 (AMM).
- Discard the bolts (b), the washers (c) and (d) and the nuts (e).
- Install the hub body (1) as per Task 64-21-00, 4-4 (AMM) with bolts (3), washers (4) and (5) and nuts (6).
3.B.4. Replacement of the splined flange (f) (Figure 1)
- Remove the splined flange (f) (Figure 1) as per Task 64-21-00, 4-3 (AMM).
- Install the splined flange (2) as per Task 64-21-00, 4-4 (AMM).
3.B.5. Final steps
- Install the fairing (g).
- Install the fairing plug (h).
- If necessary, apply the rotor brake.
Revision 0  2019-10-29  Page 10/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE
recording  compliance
ALERT SERVICE BULLETINS in the SB Insight tool does
not replace the recording in the helicopter documents.
ASB EC120-05A020
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2019-10-29  Page 11/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
Inspection area
b, c, d, e
3, 4, 5,6
2
Interface area
between the splined
flange and the hub
body
Return to paragraph 3.B.2.
Return to paragraph 3.B.3.
Return to paragraph 3.B.4.
Figure 1
Revision 0 2019-10-29  Page 12/12
Revision 3 2024-09-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
