# Airbus Helicopters Emergency Alert Service Bulletin 05A049

## Copies (5)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 6 ("Airbus Helicopters EASB 05.01.07 and 05A049 (co-published) Rev 2"), 18 pages: PDF https://openairdocs.org/files/sha256/fd/65/fd65dce49e5b96c9ce50a6b339290f2e733a5c3b01d0a8c990b9fe535b9ab6fc; text https://openairdocs.org/service-documents/airbus-helicopters/05a049/file/fd65dce49e5b.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 6 ("Airbus Helicopters EASB 05.01.07 and 05A049 (co-published) Rev 3"), 23 pages: PDF https://openairdocs.org/files/sha256/52/ef/52ef0b99c03cd0ab21208c6c89bf3758f2c465e9ecb24205058dc1a82e93d7bd; text https://openairdocs.org/service-documents/airbus-helicopters/05a049/file/52ef0b99c03c.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 6 ("Airbus Helicopters EASB 05.01.07 and 05A049 (co-published) Rev 4"), 29 pages: PDF https://openairdocs.org/files/sha256/11/d0/11d07999d17ea5115107e3f23b51ebc5fb6c88f78c44f672f7d5c106a7bc3dd3; text https://openairdocs.org/service-documents/airbus-helicopters/05a049/file/11d07999d17e.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 6 ("Airbus Helicopters EASB 05A049 Rev 5"), 29 pages: PDF https://openairdocs.org/files/sha256/7c/d6/7cd640708936ab7afabc2b6d91e6e47c94e7c86a7bee7ee38d3531aefe04799c; text https://openairdocs.org/service-documents/airbus-helicopters/05a049/file/7cd640708936.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 6 ("Airbus Helicopters EASB 05A049 Rev 6"), 32 pages: PDF https://openairdocs.org/files/sha256/3c/b4/3cb47307973830b3554bd53ae33b13cb6a83a32e1a4a4e277470ee15f70a7788; text https://openairdocs.org/service-documents/airbus-helicopters/05a049/file/3cb473079738.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 05A049
- Latest revision known: 05A049, Revision 6, dated July 25, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/05a049

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-16-05](https://openairdocs.org/ad/2021-16-05.md), effective Oct 13, 2021: Revision 6

## Text (18 pages)

Revision 6, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379; AD 2021-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  EASB
EMERGENCY
ALERT SERVICE BULLETIN
SUBJECT: TIME LIMITS - MAINTENANCE CHECKS - Main rotor drive
Check of the Main Gearbox (MGB) oil filter and particle detectors, limitation of
the epicyclic modules
ATA: 63
For the attention of
HELICOPTER(S)  Version(S)
NUMBER
CONCERNED  Civil  Military
AS332  05.01.07  L2
EC225  05A049  LP
Revision No.  Date of issue
Revision 0  2016-06-15
Revision 1  2016-08-03
Revision 2  2016-10-07
Summary:
Airbus Helicopters issues this ALERT SERVICE BULLETIN to introduce the following measures:
- identification of epicyclic modules which have been subject to an unusual event,
- modification of the intervals for checking the MGB particle detectors and oil filter, and modification of the
procedure to be followed after the collection of particles,
- prohibition of use of the MGB particle burner in flight.
Reason for last Revision:
To extend the effectivity to all AS332 L2 and EC225 LP version helicopters.
To modify the conditions for returning epicyclic modules that have been subject to an unusual event.
To add the check of the flared casing particle detector.
To modify the intervals for checking the MGB particle detectors and oil filter and the procedure to be followed after
the collection of particles.
To prohibit the use of the MGB particle burner in flight.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2016-06-15  Page 1/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 2 (OCR)

AIRBUS
HELICOPTERS  EASB
1.  PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
AS332 L2 and EC225 LP version helicopters.
1.A.2. Non-installed equipment or parts
Epicyclic modules, all Part Numbers, which have been involved in an event listed in Table No. 1
(paragraph 1.E.2.).
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
The investigations conducted following the accident of an EC225 LP helicopter in Norway on April 29, 2016
have revealed deteriorations on a second stage planet gear of the epicyclic module. It has to be determined
if this was a contributing causal factor or a consequence of a different causal factor.
Following these observations, and although analyses are ongoing, Airbus Helicopters introduces the
following precautionary measures for helicopters which are not subject to EASA Airworthiness Directive
No. 2016-0104-E:
- Inspection of the MGB oil filter and particle detectors after the last flight of the day. The purpose of this
measure is to reinforce the monitoring of the MGB epicyclic module.
- Identification of the epicyclic modules which have been subject to an unusual event since new or Overhaul,
for a return for Overhaul. This measure is introduced because the MGB of the helicopter involved in the
accident had been subject to a shock impact during road transport a few months previously.
Revision 1:
Since the issue of Revision 0 of this ALERT SERVICE BULLETIN, complementary analyses have been
carried out. Considering these analyses, the interval for checking the MGB oil filter is extended to 25 flying
hours (instead of ALF).
Only this check interval has been extended, the particle detectors must be checked on a daily basis, either
after the last flight of the day (ALF) or before the first flight of the day (BFF).
In addition, the MGB oil filter checking procedure has been detailed
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 1 does not affect compliance with Revision 0.
NOTE 1
Revisions 0 and 1 of this ALERT SERVICE BULLETIN were
applicable to the following helicopters:
- AS332 L2 and EC225 LP version helicopters, which are not
subject to EASA Airworthiness Directive No. 2016-0104-E.
Revision 0 2016-06-15  Page 2/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 3 (OCR)

AIRBUS
HELICOPTERS  EASB
Revision 2:
Following a fatal accident which involved an EC225 LP helicopter in Norway on April 29, 2016, EASA
decided to temporarily ground the fleet of AS332 L2 and EC225 LP version helicopters through
Airworthiness Directive No. 2016-0104-E as precautionary action, pending further investigation and
development of protective measures by Airbus Helicopters.
Since the issue of Airworthiness Directive No. 2016-0104-E, analyses, calculations and tests have been
performed by Airbus Helicopters and reviewed by EASA.
The potential root causes of the accident can now be reduced to one related to the opening of the epicyclic
module fixed ring after the failure of a 2nd stage planet gear.
As a consequence, a set of protective measures has been defined which restore an acceptable level of
safety.
These measures are based on three approaches:
- the 2nd stage planet gear bearing is now limited to only one type and the latest definition which has
demonstrated reliability on the AS332 and EC225 LP main gear box and has a new reduced service life
limit,
- the monitoring of the main gear box has been enhanced by adopting more severe criteria for particles, by
reducing the inspection intervals for all magnetic plugs, and by introducing an additional inspection for the
MGB oil filter,
- 2nd stage planet gears installed in epicyclic modules which have been subject to unusual events related to
high shock impacts must be removed from service.
On this basis, EASA has decided to lift the grounding order for AS332 L2 and EC225 LP version helicopters
provided that the measures defined in this ALERT SERVICE BULLETIN and ALERT SERVICE BULLETIN
No. 63.00.83 (AS332) or No. 63A030 (EC225) are complied with.
Consequently, Revision 2 consists in:
- extending the effectivity to all AS332 L2 and EC225 LP version helicopters,
- adding the check of the flared casing particle detector,
- modifying the intervals for checking the MGB particle detectors and oil filter, modifying the procedure to be
followed after the collection of particles,
- prohibiting the use of the MGB particle burner in flight,
- modifying the conditions for returning epicyclic modules that have been subject to an unusual event.
Revision 2 affects compliance with the previous revisions.
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN consists in:
- requiring the replacement of the epicyclic modules identified in accordance with Table No. 1
(paragraph 1.E.2.) and their return for replacement of the 2" stage planet gears,
- introducing a reduced-interval periodic check of the MGB oil filter and particle detectors,
- modifying the procedure to be followed after the collection of particles,
- prohibiting the use of the MGB particle burner in flight.
Revision 0 2016-06-15  Page 3/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 4 (OCR)

AIRBUS
HELICOPTERS  EASB
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
- Comply with paragraph 3.B.1.:
. Before the next flight,
Then,
. After the last flight of the day, without exceeding 10 flying hours.
- Comply with 3.B.2.:
. Before the next flight,
Then,
. Every 10 flying hours.
- The burning of MGB particles in flight is no longer permitted. Comply with paragraph 3.B.3. before the next
flight.
Non-installed equipment or parts:
Not applicable.
Revision 0 2016-06-15  Page 4/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 5 (OCR)

AIRBUS
HELICOPTERS  EASB
1.E.2. Compliance in service
The work on the helicopter is to be performed by the operator.
Helicopters/installed equipment or parts:
- Upon receipt of Revision 2 of this ALERT SERVICE BULLETIN:
. Unless this has been done by way of the previous revisions, identify on the Log Card (FM) whether the
epicyclic module has undergone a Repair (RE) since the latest Overhaul (RG) or since new (if the
epicyclic module has never undergone RG):
NOTE 2
Repair (RE): Check of the module in maintenance center
with part replacement and/or part repair.
- If the reason for the RE is known, check whether it corresponds to one of the events specified in
Table No. 1,
Table No. 1:
Event  Inspection following the event
Accident
Shock impact/Drop of the epicyclic module
Shock impact on the main rotor blades  05-53-00-213
Shock impact on the tail rotor blades  05-53-00-214
Hard landing  05-53-00-223
Lightning strike  05-53-00-225
- If the reason for the RE is unknown:
. If the RE was carried out by an approved repair station, contact the repair station to find out the reason
for the RE and inform Airbus Helicopters at the address TechnicalSupport.Helicopters@airbus.com.
• If the RE was carried out by Airbus Helicopters, contact Airbus Helicopters at the address
TechnicalSupport.Helicopters@airbus.com.
. Check whether the reason for the RE corresponds to one of the events specified in Table No. 1.
• Then, on the FM, identify the number of flying hours logged by the epicyclic module (since last RG) and
the number of flying hours logged by the 2nd stage planet gears (since new).
- If the number of flying hours logged by the 2" stage planet gears is greater than the number of flying
hours logged by the epicyclic module:
• If the RG was performed by an approved repair station, contact the repair station to determine
whether, since installation of the 2nd stage planet gears as new, an RE has been performed for one of
the events specified in Table No. 1, and inform Airbus Helicopters at the following address
TechnicalSupport.Helicopters@airbus.com.
• If the RG was performed by Airbus Helicopters, contact Airbus Helicopters at the following address
TechnicalSupport.Helicopters@airbus.com, to determine whether, since installation of the 2nd stage
planet gears as new, an RE has been performed for one of the events specified in Table No. 1.
Revision 0 2016-06-15  Page 5/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 6 (OCR)

AIRBUS
HELICOPTERS  EASB
. Comply with the instructions of Table No. 2 below before resuming flights and, thereafter, according to the
periodicities of the Table No 2:
Table No. 2
Condition  Action  Periodicity
Helicopters equipped  - Replace the epicyclic
with an epicyclic module  module.
which has undergone RE  - Return it to Airbus  Not applicable.
following an event  Helicopters for replacement
specified in Table No. 1  of the 2nd stage planet gears.
After the last flight of the
- Comply with
day, without exceeding
paragraph 3.B.1.
10 flying hours
- Comply with  paragraph 3.B.2.  Every 10 flying hours
- The burning of MGB particles
For all helicopters  in flight is no longer
permitted.  Not applicable.
- Comply with
paragraph 3.B.3.
If particles have been collected
since new or since last RG,  Not applicable.
comply with Appendix 4.A.
- For helicopters which are stored or parked without being stored:
• Any flights during this period require compliance with this ALERT SERVICE BULLETIN.
• The performance of a ground run during the storage period does not require compliance with this ALERT
SERVICE BULLETIN.
Revision 0 2016-06-15  Page 6/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 7 (OCR)

AIRBUS
HELICOPTERS  EASB
Non-installed equipment or parts:
- If since the last Overhaul (RG) of the epicyclic module, at least one Repair (RE) was performed on the
module, check its history to find out the reason for the interventions:
. If the epicyclic module has been subject to an event specified in Table No. 1:
- do not install the epicyclic module,
- return the epicyclic module to Airbus Helicopters for replacement of the 2nd stage planet gears, as per
paragraph 2.D.
. If the reasons are unknown:
- if at least one RE was carried out by an approved repair station, contact the repair station to find out the
reason for the RE and inform Airbus Helicopters at the address
TechnicalSupport.Helicopters@airbus.com,
- if at least one RE was carried out by Airbus Helicopters, contact Airbus Helicopters at the address
TechnicalSupport.Helicopters@airbus.com.
• If the epicyclic module has been subject to an event specified in Table No. 1:
- do not install the epicyclic module,
- return the epicyclic module to Airbus Helicopters for replacement of the 2nd stage planet gears, as per
paragraph 2.D.
- If the latest (D-level) intervention on the epicyclic module was an Overhaul (RG), on the FM identify the
number of flying hours logged by the epicyclic module (TSO) and the number of hours logged by
the 2nd stage planet gears (TSN).
• if the number of flying hours logged by the 2 stage planet gears is greater than the number of flying
hours logged by the epicyclic module,
- if the RG was performed by an approved repair station, contact the repair station to determine whether,
since installation of the 2nd stage planet gears as new, an RE has been performed for one of the events
specified in Table No. 1, and inform Airbus Helicopters at the following address
TechnicalSupport.Helicopters@airbus.com,
- if the RG was performed by Airbus Helicopters, contact Airbus Helicopters at the following address
TechnicalSupport.Helicopters@airbus.com, to determine whether, since installation of the 2n stage
planet gears as new, an RE has been performed for one of the events specified in Table No. 1.
. If the epicyclic module has been subject to an event specified in Table No. 1:
- do not install the epicyclic module,
- return the epicyclic module to Airbus Helicopters for replacement of the 2nd stage planet gears, in
accordance with paragraph 2.D.
- Otherwise:
• No additional measures are required.
Revision 0 2016-06-15  Page 7/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 8 (OCR)

AIRBUS
HELICOPTERS  EASB
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on June 15, 2016 by the Airbus Helicopters Airworthiness Department for civil version helicopters which are
not subject to EASA Airworthiness Directive No. 2016-0104-E.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on June 15, 2016 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French
Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on August 03, 2016 by the Airbus Helicopters Airworthiness Department for civil version helicopters which
are not subject to EASA Airworthiness Directive No. 2016-0104-E.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on August 03, 2016 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved
on October 07, 2016 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved
on October 07, 2016 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualifications:
Qualification: 1 Mechanical Engineering Technician.
The time for the operations is indicated for reference, for a standard configuration.
Time for the operations:
- Approximately 20 minutes to check the particle detectors (paragraph 3.B.1.), excluding the time for access,
- Approximately 1 hour and 45 minutes to check the MGB oil filter (paragraph 3.B.2.).
Revision 0 2016-06-15  Page 8/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 9 (OCR)

AIRBUS
HELICOPTERS  EASB
1.H. WEIGHT AND BALANCE
Not applicable.
1.. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
Standard Practices Manual:
MTC: 20.08.01.601: Periodical monitoring of lubricating oil checking elements - Monitoring of lubricating oil
contamination on mechanical assemblies equipped with magnetic plugs
Aircraft Maintenance Manual:
MMA: 05-53-00-213: Inspections following an incident - Shock Impacts on the Main Rotor Blades
MMA: 05-53-00-214: Inspections following an incident - Shock Impacts on Tail Rotor Blades
MMA: 05-53-00-218: Inspections following an incident - Contamination of Gearbox Oil
MMA: 05-53-00-223: Inspections following an incident - Hard Landing
MMA: 05-53-00-225: Inspections following an incident - Aircraft Struck by Lightning
MMA: 60-00-00-212: Rotor Standard Practices - Checking a Magnetic Component
MMA: 60-00-00-641: Rotor Standard Practices - Filling and Draining
MMA: 63-24-01-061: Main Gearbox Oil Filter - Removal - Installation of Filter Cartridge
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2016-06-15  Page 9/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 10 (OCR)

AIRBUS
HELICOPTERS  EASB
2.  EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Not applicable.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and the list below:
Designation  Qty  Consumable P/N  Item
Solvent  Off the shelf  CM 208  1
Solvent  1  CARECLEAN  CM 231  2
The consumables can be ordered separately from the INTERTURBINE AVIATION LOGISTICS company:
Website:  http://www.interturbine.com
Telephone:  +49.41.91.809.300
AOG:  +49.41.91.809.444
Special tools:
Designation  Qty  Tool P/N or equivalent  Item
Drain pan  2  Off the shelf  ZZ
Long-stiff-bristle brush  1  Off the shelf  УУ
Flexible mini-magnet  (Ø 5mm max.)  Off the shelf  xX
Magnetic-flat-tip screwdriver  1  Off the shelf  ww
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Return the equipment or parts in accordance with the procedure described in Service Letter No. 1567-00-02.
Revision 0 2016-06-15  Page 10/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 11 (OCR)

AIRBUS
HELICOPTERS  EASB
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
CAUTION
AIRBUS HELICOPTERS REMINDS YOU THAT IT IS
MANDATORY  TO  CONTACT  AIRBUS
HELICOPTERS IF THE CRITERIA SPECIFIED IN
MTC WORK CARD 20.08.01.601 ARE EXCEEDED.
3.B. WORK STEPS
3.B.1. Check of the particle detectors
- For AS332 helicopters:
. Check that there are no metal particles on the MGB particle detectors as per:
- Sub-task 60-00-00-212-001 (PRE MOD 0728123) or Sub-task 60-00-00-212-006 (POST MOD 0728123)
of MMA Task 60-00-00-212 for the particle detector of the epicyclic module,
- Sub-task 60-00-00-212-002 of MMA Task 60-00-00-212 for the flared casing particle detector,
- Sub-Task 60-00-00-212-004 of MMA Task 60-00-00-212 for the particle detector of the MGB sump.
. If particles are collected, refer to Appendix 4.A. for the steps to be taken.
- For EC225 helicopters:
. Check that there are no metal particles on the particle detectors of the Main Gearbox epicyclic module,
MGB sump and flared casing, as per MMA Task 60-00-00-212.
• If particles are collected, refer to Appendix 4.A. for the steps to be taken.
- For all helicopters
. Check that there are no metal particles on the MGB oil cooler particle detector:
- place a drain pan under the oil cooler drain plug,
- unlock and remove the oil cooler drain plug,
- remove the seal and take care not to damage it,
- ensure that the seal is in correct condition: if it shows no signs of damage (no deformations, tears,
compression, distortions), the seal can be reinstalled,
- check the magnetic particle detector of the drain plug,
- install the seal,
- install and safety the drain plug using lockwire,
- remove the drain pan from under the oil cooler drain plug,
- check and top up the MGB oil level as per Sub-task 60-00-00-641-004 of MMA Task 60-00-00-641.
• If particles are collected, refer to Appendix 4.A. for the steps to be taken.
Revision 0 2016-06-15  Page 11/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 12 (OCR)

AIRBUS
HELICOPTERS  EASB
3.B.2. Check of the MGB oil filter
CAUTION
DO NOT DISCARD THE SEALS UPON REMOVAL.
• Remove the filter cartridge as per Sub-task 63-24-01-031-001 of MMA Task 63-24-01-061:
NOTE 1
It is not necessary to drain the bowl when complying with the
procedure below.
- during removal:
. remove the seals and take care not to deteriorate them,
. ensure that the seals are in correct condition: if they show no signs of deterioration (no deformations,
tears, compression, distortions), the seals can be reinstalled,
collect the oil flowing from the filter cartridge into a clean drain pan (zz):
- check for particles in the oil collected. If any particles are found, collect them.
. Check for metal particles in the MGB oil filter:
- Collect the particles inside the filter cartridge:
• Fill a drain pan (zz) (clean, and preferably light colored) with solvent (1) or (2).
. Above the drain pan (zz):
- brush the recesses of the filter cartridge, one by one, lengthwise, using a long-stiff-bristle brush (yy)
and solvent (1) or (2). Brush in one direction, then the other,
- flush the filter with solvent (1) or (2) to remove the remaining oil and any surface particles,
- Insert a thin magnetic tool (xx) or magnetic-flat-tip screwdriver (ww), without sharp edges, into each
of the filter recesses, and collect all the particles that can be collected.
NOTE 2
The video available via the following link shows how to
collect particles inside the filter cartridge:
http://www.dailymotion.com/video/kNAtYkSmfH054UjPavD
- Collect the particles in the bottom of the bowl:
• Using a magnetic tool (or magnet) collect the particles located in the bottom of bowl.
• If particles are collected, refer to Appendix 4.A. for the steps to be taken.
• Check the condition of the filter element; if it is not torn, the filter element can be reinstalled.
. Blow the filter cartridge with compressed air.
. Immerse the filter cartridge in service oil.
Revision 0 2016-06-15  Page 12/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 13 (OCR)

AIRBUS
HELICOPTERS  EASB
. Install the filter cartridge as per Sub-task 63-24-01-431-001 of MMA Task 63-24-01-061.
NOTE 3
Oil seepage and the appearance of oil vapor in the bowl
during first pressurization is normal (due to installation of the
seal). This phenomenon can be eliminated simply by
cleaning the area after first pressurization.
3.B.3. Updating the Flight Manual
- Insert the pages given in the Appendix, or subsequent approved revisions of these pages, in the Flight
Manual:
• For AS332 L2, version helicopters, insert the pages given in Appendix 4.B
• For EC225 LP, version helicopters, insert the pages given in Appendix 4.C.
The pages given in the Appendix are a partial update of certain points on the existing pages (like a Rush
Revision of the Flight Manual). Each page given in the Appendix is to be inserted (without deleting the
Service Bulletin page header/footer) in front of the page containing the former text to be modified or to be
supplemented. No page in the Flight Manual is deleted.
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
- Record compliance with this document, with the revision number, on the Log Card (FM) of the epicyclic
module.
- Following the first compliance with paragraph 3., record compliance with this document, with the revision
number, in the helicopter documents.
Revision 0 2016-06-15  Page 13/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 14 (OCR)

AIRBUS
HELICOPTERS  EASB
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
a/ When removing/installing the Main Rotor Mast:
NOTE 4
REMINDER: As soon as the Rotor Mast is removed, blanks
must be installed to prevent the ingress of foreign objects.
Furthermore, during shipment or storage of an epicyclic
module, blanks must be installed to prevent the ingress of
foreign objects.
- If, after removal of the Rotor Mast, the epicyclic module was not covered:
• Before installing the Rotor Mast, visually check that there are no foreign objects inside the epicyclic
module.
b/ Close monitoring:
- During close monitoring subsequent to the detection of particles when complying with this ALERT
SERVICE BULLETIN:
. At the maximum permissible weight specified in the Flight Manual, perform a hover flight in order to
assess the rate of change of contamination. The duration of this flight shall be equal to the time
necessary for the MGB temperature to stabilize + 10 minutes.
. After this flight:
- Check the particle detectors as per paragraph 3.B.1.
- Check the MGB oil filter as per paragraph 3.B.2.
- Make sure that the contamination is within the tolerance limits of Appendix 4.A.:
. take into account all the particles produced since they started occurring.
. If the contamination is within the tolerance limits of Appendix 4.A.:
- Resume flights.
- Check the particle detectors as per paragraph 3.B.1. after each flight.
- Check the MGB oil filter as per paragraph 3.B.2. every 5 flying hours.
- If, after 25 flying hours, no particles are detected, resume the monitoring cycle as per
paragraph 1.E.2. of this ALERT SERVICE BULLETIN.
Revision 0 2016-06-15  Page 14/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 15 (OCR)

AIRBUS
HELICOPTERS  EASB
4.  APPENDIX
4.A. PARTICLE ANALYSIS
Analyze all the particles collected since new or last Overhaul of the epicyclic module, in accordance with the
tollowing flowchart.
CAUTION
REMINDER: ALL THE PARTICLES COLLECTED
MUST BE KEPT.
Comply with MMA Task
05-53-00-218
Characterize the type of particles)
as per MTC Work
Card 20.08.01.601
If unsure about the
NO  flakes/chips/  Any  YES  characterization of the particles
splinters?*  analysis and contact Airbus  collected, perform a metallurgical
Helicopters
(TechnicalSupport. Helicopters@
airbus.com) before resuming
Comply with MTC Work  flights.
Card 20.08.01.601  Have all
2nd stage plane
NO  gears logged  YES
less than 50
flying hours
since new?
Check the total surface area of a  Resume flights under close
the particles collected since  monitoring as per
Do not include the  last epicyclic module RG **  paragraph 3.D.***.
number of particles  (or since new if no RGs have  If further particles are
collected during earlier  been performed since)  collected during the close
compliance with this  monitoring period, contact
ALERT SERVICE  Airbus Helicopters.
BULLETIN if they were not  (TechnicalSupport. Helicopters
16NCD13 particles.  @airbus.com) before
resuming flights.
** If no further particles are
detected during the close
monitoring period, do not take
account of the number of
collected particles when any
particles are detected later on.
Revision 0 2016-06-15  Page 15/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 16 (OCR)

AIRBUS
HELICOPTERS  EASB
Total
NO  surface area  YES
of collected
particles
Examine the particles with
the largest surface area (S)
Examine the longest
particles (L)
Examine the thickest
particles (e)
If S ≤ 2 mm  If S > 2 mm
and  or  Perform a metallurgical analysis
If L≤ 2 mm  If L > 2 mm  on the largest 10 particles before
and  or  resuming flights.
If e ≤ 0.2 mm  If e > 0.2 mm  If less than 10 particles are
collected,  perform  the
metallurgical analysis on all the
Resume flights.  Perform a metallurgical analysis  particles before resuming flights.
- Ensure close monitoring as per  on all the particles exceeding one
paragraph 3.D  of the individual criteria
and on the largest 10 particles,
before resuming flights.
If less than 10 particles are
collected, perform the
metallurgical analysis on all the
particles before resuming flights.
Other designations for
16NCD13:
- MILS 7393  SAE 9315  NO  16NCD13*  Any  YES
MILS 8690  particles?
Analyze all the particles collected so far as
per MTC Work Card 20-08-01-601.
Resume flights if the criteria of Work Card
20-08-01-601 are not reached.
- Remove the epicyclic module for D-level inspection.
- Install an airworthy epicyclic module.
- Perform close monitoring of the MGB as per
paragraph 3.D
If further 16NCD13 particles are collected during the close
monitoring period, contact Airbus Helicopters
(TechnicalSupport.Helicopters@airbus.com).
NOTE
The close monitoring specified in this ALERT SERVICE
BULLETIN  must be performed in accordance with
paragraph 3.D.
Revision 0 2016-06-15  Page 16/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 17 (OCR)

AIRBUS
HELICOPTERS  EASB
4.B. FLIGHT MANUAL - AS332 L2 VERSION HELICOPTERS
FLIGHT MANUAL
The paragraph 3 is superseded by the following one :
3 CHIP DETECTION IN MGB
- Symptoms  : Amber CHIP light illuminates on the XMSN Panel.
- Consequences: Metal particles present on one or both detectors in MGB.
- Procedure  : Reduce power, as required; if possible, do not exceed the
level flight power at VY.
• LIMIT DURATION OF FLIGHT
NOTE: After landing, confirm the fault by examining the magnetic plugs.
If the presence of particles is confirmed, refer to the
Maintenance Manual.
Approved  332 L2  3.7
Page 9
Revision 0 2016-06-15  Page 17/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 18 (OCR)

AIRBUS
HELICOPTERS  EASB
4.C. FLIGHT MANUAL - EC225 LP VERSION HELICOPTERS
FLIGHT MANUAL
The paragraph 3 - CHIP DETECTION IN MGB, IGB or TGB, is superseded by the following one:
3 CHIP DETECTION IN MGB, IGB OR TGB
SYMPTOMS  CONDITION  CONSEQUENCES AND PROCEDURES
Procedure:
Reduce power, as required; if possible, do not exceed the
level flight power at Vy.
Metal particles
CHIP  present on the  LIMIT DURATION OF FLIGHT
detectors in MGB,
IGB or TGB.
NOTE
After landing, confirm the fault by examining the plug in
accordance  with approved  Maintenance  Manual
procedures.
APPROVED  EC 225 LP  3.7
Revision 0 2016-06-15  Page 18/18
Revision 2 2016-10-07  This document is available on the internet: www.airbushelicopters.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
