# Airbus Helicopters Emergency Alert Service Bulletin 62A017

Copy: No revision named ("Airbus Helicopters EASB 62A017 Rev 0"), 15 pages: PDF https://openairdocs.org/files/sha256/0f/03/0f03368d3182b1d7ddc0637970b99667630bbcf1c7a548a91f60b00546a55f18; text https://openairdocs.org/service-documents/airbus-helicopters/62a017/file/0f03368d3182.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0878; AD 2022-14-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 62A017
- Page: https://openairdocs.org/service-documents/airbus-helicopters/62a017

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-14-51](https://openairdocs.org/ad/2022-14-51.md), effective Aug 3, 2022: No revision named

## Text (15 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0878; AD 2022-14-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
MAIN ROTOR - Main Rotor HUB (MRH)
Inspection of the MRH sleeves
For the attention of
HELICOPTER  Version(s)
CONCERNED  NUMBER  Civil  Military
EC225  62A017  LP
EC725  62A017
Revision No.  Date of issue
Revision 0  2022-06-30
Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that, on the MRH sleeves MP/N 332A31-3071-00
defined specific area with paint flaking or under possible paint touch up, there is no crack, no corrosion.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-06-30  Page 1/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters EC225 version LP and EC725 version AP with MRH that have sleeves MP/N 332A31-3071-00.
NOTE 1
Refer to the Log Card (FM) of the MRH to identify the
current notification status of the equipment.
1.A.2. Non-installed equipment or parts
- MRH that have sleeves MP/N 332A31-3071-00
- Sleeves MP/N 332A31-3071-00.
NOTE 2
Refer to the Log Card (FM) of the MRH to identify the
current notification status of the equipment.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
During blade replacement, resulting from rotor balancing difficulties, a crack was observed on one MRH
sleeve (Figure 1).
Figure 1
Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that, on the MRH sleeves
MP/N 332A31-3071-00 defined specific area (See Figure 3) with paint flaking or under possible paint touch
up, there is no crack, no corrosion.
For information, in the frame of this incident, SIN No. 3786-S-62 and No. 3792-S-05 has been already
released.
Revision 0 2022-06-30  Page 2/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
1.D. DESCRIPTION
The ALERT SERVICE BULLETIN includes the work steps that follow:
- Do a visual inspection of the MRH sleeves.
- Make sure that there is no paint flaking and no paint touch up on defined specific area (See Figure 3) of
each sleeve,
- If necessary, make sure there is no crack and no corrosion on each sleeve.
- Analyze the results.
- If necessary, replace the sleeves).
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
During the next Before First Flight visit after you received the Revevision 0 of this
ALERT SERVICE BULLETIN, comply with paragraph 3.
Non-installed equipment or parts:
Before you install the MRH and/or the sleeve (a) identified in paragraph 1.A.2. of this
ALERT SERVICE BULLETIN, do a check of the MRH (b) and/or the sleeve (a) when applicable as given in
paragraph 3.B.4. (except new MRH and/or new sleeve with 0 Flight Hour (FH)).
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on
June 30, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on
June 30, 2022 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision Owas approved on
June 30, 2022 by the Airbus Helicopters Airworthiness Department for export military versions.
Revision 0 2022-06-30  Page 3/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualifications:
Qualification: - 1 Mechanical Technicians for the visual inspection
- 1 specialist with level 2 for detection by EDDY currents (Eddy Current calibration has to be
done on with reference sample in Ferritic Stainless steel refer to the standard EN4179 and
NAS410).
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: one hour for one Mechanical Technician for the visual inspection.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one hour to comply with paragraph 3. (for visual inspection only).
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (MMA):
MMA: 62-21-00-061: Removal-Installation of Sleeve/Spherical Thrust Bearing Assembly - MAIN ROTOR
Standard Practices Manual (MTC):
MTC: 20-02-07-403: Use of AERODUR 43022 varnish - Electrical bonding
MTC: 20-04-02-401: Chemical stripping of organic surface finishes - Stripping
MTC: 20-04-05-434: Application of metal primer scheme P50 - Paint and primer application procedure
MTC: 20-04-05-436: Application of paint touch-ups - Paint and primer application procedure
MTC: 20-90-03-104: Detection by dye penetrant inspection - Corrosion detection
MTC: 20-90-03-108: Detection by EDDY currents - Corrosion detection
Information Notices (IN):
IN: 2832-1-00: Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical
investigation/core unit return
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Information Notices (SIN):
SIN: 3786-S-62: Track and Balance adjustment difficulty
SIN: 3792-S-05: Treatment of damages during regular inspections - Flight safety
Revision 0 2022-06-30  Page 4/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2022-06-30  Page 5/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction des Ventes et Relation Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or parts to be ordered separately:
Old
Key Word  Qty  New P/N  Item
P/N→  Instruction
Sleeve  AR  332A31-3071-00  1  332A31-3071-00  Replace if
necessary.
Consumables to be ordered separately:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN and list below:
Key Word  Qty  P/N  Item
120-grit abrasive cloth  AR  Commercial P/N  1
400-grit abrasive cloth  AR  Commercial P/N  2
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Revision 0 2022-06-30  Page 6/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
Special tools:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Use the procedure given in Information Notice No. 2832-1-00 to send the material back.
Revision 0 2022-06-30  Page 7/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. WORK STEPS
3.B.1. Sleeve inspection - Visual inspection and check for absence of crack
Before first flight visit after you received the revision 0 of this
ALERT SERVICE BULLETIN:
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) of the MRH (b) (Figure 2).
- Make sure that there is no:
. Paint flaking.
. Paint touch up (Refer to SIN No. 3792-S-05).
There is a paint
NO  flaking and/or a  YES  After the before first flight visual inspection, before  the next flight, do a detailed visual inspection of the
paint touch up?  affected area(s) for absence of visible crack.
There is a  YES
visible crack?
Resume flights.
• NO
Within 15 flight hours or 3 months (the first limit
1 specialist with  you meet is applicable) after the visual inspection:
level 2 for detection  - Check by EDDY currents for absence of sleeve
by EDDY currents.  crack (See Figure 3). Refer to
Work Card 20-90-03-108 (MTC)*.
Before the next flight:
- Comply with paragraph 3.B.2.
Or, alternatively
- Comply with paragraph 3.B.3.
NO  There is a
crack?
→ YES
- Stop flights
- Remove the sleeve (a) (Figure 2). Refer to
Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to
Airbus Helicopters, refer to paragraph 2.D.
- Install an airworthy sleeve (1). Refer to
Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30  Page 8/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
3.B.2. Sleeve supplemental inspection for absence of corrosion
- Do a chemical stripping. Refer to
Work Card 20-04-02-401 (MTC).**
- Check for absence of sleeve
corrosion with fluo agent. Refer to
Work Card 20-90-03-104 (MTC).
** Do an overshoot of chemical
stripping on the flaking area
and/or the paint touch up area.
- Remove corrosion by manual touch
NO  There is  YES  up with abrasive cloth (1), then (2).
corrosion?  - Repeat check for absence of sleeve
corrosion with fluo agent. Refer to
Work Card 20-90-03-104 (MTC).
- Do a primer and paint protection.
Refer to
Work Card 20-04-05-436 (MTC).
- Resume flights.
YES  The corrosion  NO
was removed?
- Dry the sleeve (a).
- Apply a protective coating.
Refer to
Work Card 20-04-05-434 (MTC).
- Do a primer and paint protection.
Refer to
Work Card 20-04-05-436 (MTC).
- Repetitively check by EDDY currents
for absence of sleeve crack at interval
inspection not exceeding 15FH. Refer
to Work Card 20-90-03-108 (MTC)*.
- If there is no crack after 75 flight hours,
no more action is required.
NO  There is a  YES
crack?
Stop flights and contact Airbus Helicopters
for a deep polish process or other solution:
- Make a Technical Event (TE) to the
address that follow:
https://airbusworld.helicopters.airbus.com
- Comply with the specific corrective action
defined by Airbus Helicopters.
- Resume flight.
1 specialist with
level 2 for detection
by EDDY currents.
- Stop flights
- Remove the sleeve (a) (Figure 2).
Refer to
Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to
Airbus Helicopters, refer to
paragraph 2.D.
- Install an airworthy sleeve (1).
Refer to
Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30  Page 9/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
3.B.3. Alternative to sleeve supplemental inspection for absence of corrosion
Do a primer and paint protection. Refer to Work Card 20-04-05-436 (MC).
Or,
Apply varnish only on the flaking area. Refer to Work Card 20-02-07-403 (MTC).
- Repetitively check by EDDY currents for
absence of sleeve crack at interval
inspection not exceeding 15FH. Refer to  * 1 specialist with
Work Card 20-90-03-108 (MTC)*.  level 2 for detection
- Alternatively, comply with paragraph  by EDDY currents.
3.B.2. to do a sleeve supplemental
inspection for absence of corrosion with
fluo agent.
- When actions of paragraph 3.B.2. are
accomplished:
. No more repetitive crack check is  - Stop flights
required.  - Remove the sleeve (a)
(Figure 2). Refer to
Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to
NO  There is a  crack?  YES  Airbus Helicopters, refer to  paragraph 2.D.
- Install an airworthy
sleeve (1). Refer to
Task 62-21-00-061 (MMA).
- Resume fliahts.
Revision 0 2022-06-30  Page 10/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
3.B.4. Work steps for Non-installed parts
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) of the MRH (b)
(Figure 2)
or
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) not installed on the
MRH (b)
- Make sure that there is no:
• Paint flaking.
. Paint touch up. Refer to SIN No. 3792-S-05.
There is a paint  Do a detailed visual inspection
NO  flaking and/or a  YES  of the affected area(s) for
paint touch up?  absence of visible crack.
NO  There is a  YES
visible crack?
The MRH (b) and/or
the sleeve (a) can
be installed.
Check by EDDY currents for
absence of sleeve crack (See
Figure 3). Refer to
Work Card 20-90-03-108 (MTC)*.
* 1 specialist with  NO  There is a  YES
level 2 for detection  crack?
by EDDY currents.
* Do an overshoot of chemical
stripping on the flaking area
and/or the paint touch up area
- Do a chemical stripping. Refer to  - If the sleeve (a) is installed
Work Card 20-04-02-401 (MTC).**  on the (MRH (b):
- Check for absence of sleeve  . Remove the sleeve (a)
corrosion with fluo agent. Refer to  (Figure 2). Refer to the
Work Card 20-90-03-104 (MTC).  Task 62-21-00-061 (MMA).
. Install an airworthy
sleeve (1). Refer to the
Task 62-21-00-061 (MMA).
. Send Back the removed
- Do a primer and paint protection.  sleeve (a) to
Work Card 20-04-05-436 (MTC).  Refer to  NO  corrosion?  There is  YES  Airbus Helicopters, refer to  paragraph 2.D.
- The MRH (b) and/or the sleeve (a)  - If the sleeve (a) is not
can be installed.  installed on the (MRH (b):
• Send Back the sleeve (a)
to Airbus Helicopters, refer
to paragraph 2.D.
Revision 0 2022-06-30  Page 11/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS  HELICOPTERS
- Remove corrosion by manual touch
up with abrasive cloth (1), then (2).
- Repeat check for absence of sleeve
corrosion with fluo agent. Refer to
Work Card 20-90-03-104 (MTC).
Contact Airbus Helicopters for a deep
polish process or other solution:
- Make a Technical Event (TE) to the
The corrosion  NO  address that follow:
was removed?  https://airbusworld.helicopters.airbus.com
- Comply with the specific corrective action
defined by Airbus Helicopters.
- The MRH (b) and/or the sleeve (a) can bea
YES  installed.
- Dry the sleeve (a).
- Apply a protective coating.
Refer to
Work Card 20-04-05-434 (MTC).
- Do a primer and paint protection.
Refer to
Work Card 20-04-05-436 (MTC).
The MRH (b) and/or
the sleeve (a) can
be installed.  * 1 specialist with
level 2 for detection
by EDDY currents
-After installation on the helicopter, keep
under close monitoring each MRH sleeve
(a) on which corrosion was removed.
- Repetitively check by EDDY currents for
absence of sleeve crack at interval
inspection not exceeding 15FH. Refer to
Work Card 20-90-03-108 (MTC)*.
- If there is no crack after 75 flight hours, no
more action is required.
- Stop flights
- Remove the sleeve (a)
(Figure 2). Refer to
Task 62-21-00-061 (MMA).
NO  There is a  crack?  YES  - Send Back the sleeve (a) to  Airbus Helicopters, refer to
paragraph 2.D.
- Install an airworthy
sleeve (1). Refer to
Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30  Page 12/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS  HELICOPTERS
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
Log Card (FM) of the MRH.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE
recording
ALERT SERVICE BULLETINS in the SB Insight tool
does not replace the recording in the helicopter documents.
EASB EC225 62A017
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2022-06-30  Page 13/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 14 (OCR)

AIRBUS  HELICOPTERS
A
Back to paragraphs, 3.B.2., 3.B.3. and 3.B.4.
Figure 2
Revision 0 2022-06-30  Page 14/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 15 (OCR)

AIRBUS  HELICOPTERS
Specific area
a
Back to paragraphs 1.C., 1.D., 3.B.1. and 3.B.4.
Figure 3
Revision 0 2022-06-30  Page 15/15
This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
