# Eurocopter Alert Service Bulletin BO 105

Copy: No revision named ("Eurocopter ASB BO 105 LS 30-12"), 6 pages: PDF https://openairdocs.org/files/sha256/80/7b/807b95018e39b2ce57b9572b60e1be916956604aa251191e82785944799d8129; text https://openairdocs.org/service-documents/airbus-helicopters/bo105/file/807b95018e39.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0887; AD 2013-16-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: BO 105
- Page: https://openairdocs.org/service-documents/airbus-helicopters/bo105

## ADs that cite it (6) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-16-13](https://openairdocs.org/ad/2013-16-13.md), effective Sep 27, 2013: No revision named
- [AD 2006-15-14](https://openairdocs.org/ad/2006-15-14.md), effective Aug 31, 2006: No revision named
- [AD 2000-26-01](https://openairdocs.org/ad/2000-26-01.md), effective Jan 26, 2001: No revision named
- [AD 99-24-05](https://openairdocs.org/ad/99-24-05.md), effective Dec 3, 1999: No revision named
- [AD 99-20-13](https://openairdocs.org/ad/99-20-13.md), effective Nov 2, 1999: No revision named

All 6: https://openairdocs.org/service-documents/airbus-helicopters/bo105/ads.md

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/bo105/proposed.md).

## Text (6 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0887; AD 2013-16-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

eurocopter
an EADS Company
EUROCOPTER CANADA LIMITED
ALERT
SERVICE BULLETIN
BO 105 LS A-3
No:  ASB BO 105 LS 30-12
Date:  December 12, 2008
Subject:  Tail Rotor - Check of balance weights and control lever
1. PLANNING
A. Effectivity
(1) Helicopters Affected:  All BO 105 LS A-3 helicopters
(2) Components Affected:  Fly weight  117-31715.01 or
117-31715.02
B642M1011 201
105-317171.10
Control lever assembly  105-31736 or
105-31767
(3) Spare Parts Affected:  Not applicable
B. Reason
During a periodical inspection of a BO 105 helicopter, corrosion was detected on the tail rotor
balance weights in the area of the thread. At an advanced stage, this corrosion could possibly
destroy the threads. In order to be able to recognize this damage and to replace the damaged
components, a visual inspection is introduced with this Alert Service Bulletin. (The BO 105 LS A-3
is similar in this area.
December 12, 2008  Page 1 of 6  ASB BO 105 LS 30-12

### Page 2 (OCR)

eurocopter  an EADS Company
EUROCOPTER CANADA LIMITED
C. Description
Check balance weights and control levers on tail rotor. Replace damaged balance weights and
control levers.
D. Compliance
1.D.1. Accomplish inspection of the balance weights and the control levers in accordance with
Section 2.B of this Alert Service Bulletin within the next 100 flight hours after receipt of this
Alert
Service Bulletin, but by February 28, 2009 at the latest.
1.D.2.  After this, the inspection of the balance weights and the control levers must be
regularly accomplished together with the PERIODICAL INSPECTION".
1.D.3.  If damage is detected at the inspection in accordance with Section 2.B.3 and/or 2.B.4
which is not within the admissible damage limits, replace the affected component before the
next flight.
E. Approval
Engineering aspects of this bulletin have been Transport Canada approved.
F. Manpower Requirements
Approx. 4 man-hours
G. Material, Cost and Availability
Pricing and availability information is available upon request. Refer to Section 3 for material.
H. Special Tools
(not applicable)
Mass and Moment
(not applicable)
J. Reference
BO 105 LS A-3 Maintenance Manual
K. Other Publications Affected
This Alert Service Bulletin will be incorporated in the following document with a future revision to the
Maintenance Manual.
L  Electrical Load Data
(not affected)
December 12, 2008  Page 2 of 6  ASB BO 105 LS 30-12

### Page 3 (OCR)

eurocopter  an EADS Company
EUROCOPTER CANADA LIMITED
2. ACCOMPLISHMENT INSTRUCTIONS
A. Inspections Required
(not applicable)
B. Work Procedure
1. Remove balance weights from control lever:
Apply marks to the balance weights before they are removed
in order to be able to re-establish the correct assignment
and the old installation position towards the control lever
when the balance weights are installed.
2. Remove cotter pins (3, Figure 1) and remove balance weights (2) from control
lever (1). Discard cotter pins (3).
3. Check balance weights (1, Figure 2) for corrosion and/or mechanical damage:
- If no corrosion or mechanical damage is detected in the thread area and on the
cylindrical mating surfaces of the balance weights, proceed in accordance with Section
2.B.4.
- If damage to the threads on less than 25 percent of the respective thread is
detected, the balance weights can be easily screwed and the cylindrical mating
surfaces are not damaged, remove corrosion using suitable means. Proceed in
accordance with Section 2.B.4.
- If damage to the threads on more than 25 percent of the respective thread is
detected or the cylindrical mating surfaces are extensively damaged, replace
balance weights before the next flight. Proceed in accordance with Section 2.B.4.
4. Check control lever (2, Figure 2) for corrosion and/or mechanical damage:
- If no corrosion or mechanical damage is detected, proceed in accordance with Section
- If mechanical damage and/or corrosion is detected, polish out damage using
polishing cloth 600.
- If a depth of a maximum of 0.3 mm is not exceeded when polishing out and
the diameter of the control lever is not less than a minimum measure of
9.95 mm, proceed in accordance with Section 2.B.2.
- If a depth of 0.3 mm is exceeded when polishing out and/or the diameter of
the control lever in the transition area towards the thread is less than a
minimum measure of 9.95 mm, replace control lever before the next flight.
5. Install balance weights to control lever:
NOTE Ensure during installation of the balance weights that the
balance weights are correctly assigned and installed to the
control lever in accordance with the applied marks.
6. Apply corrosion preventive paste (CM 510) onto thread of control lever
(1, Figure 1).
December 12, 2008  Page 3 of 6  ASB BO 105 LS 30-12

### Page 4 (OCR)

eurocopter
an EADS Company
EUROCOPTER CANADA LIMITED
7. Screw on balance weights (2, Figure 1) until the position on the control lever (1) that
was marked at the removal has been reached. Secure balance weights (2) using
new cotter pins (3).
NOTE  If vibrations on the tail rotor are detected during operation of
the helicopter, balance tail rotor in accordance with Maintenance
Manual, Chapter 33-3.
8. Confirm accomplishment of this Alert Service Bulletin by an entry in the historical
record of the helicopter.
C. Conclusions
(not applicable)
3. MATERIAL INFORMATION
3.1. Required Parts:
No.  _ Qty.  Nomenclature  Part No.
1  2  Split pin**  LN94-30022
2  A/R  Corrosion preventive paste (CM 510)*
* Consumable material, to be ordered from the Interturbine company.
** Standard part, item must be separately ordered as needed.
December 12, 2008  Page 4 of 6  ASB BO 105 LS 30-12

### Page 5 (OCR)

eurocopter
an EADS Company
EUROCOPTER CANADA LIMITED
2x2
3x2
• 2x2
3x2
1  Control lever assembly (1)
2  Fly weight
Split pin LN94-30022
• Apply corrosion preventive paste (CM 510) onto thread.
Figure 1 Tail Rotor Balance Weights
December 12, 2008  Page 5 of 6  ASB BO 105 LS 30-12

### Page 6 (OCR)

eurocopter
an EADS Company
EUROCOPTER CANADA LIMITED
1  Fly weight
2  Control lever assembly
A Check areas for corrosion and/or mechanical damage.
Figure 2 Inspection of Balance Weights and Control Lever
December 12, 2008  Page 6 of 6  ASB BO 105 LS 30-12

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
