# Eurocopter Service Bulletin C-2-22A-009

Copy: Revision 1 ("ASB BK117 C-2-22A009 Rev 1"), 5 pages: PDF https://openairdocs.org/files/sha256/40/33/403318d211ad53c7175b6f1d829174fd02c41943a19a491e8f5e8a39d52a309c; text https://openairdocs.org/service-documents/airbus-helicopters/c-2-22a009/file/403318d211ad.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0577, the docket of AD 2015-12-09, 2015-12-09 R1. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Service Bulletin)
- Number: C-2-22A-009
- Latest revision known: C-2-22A-009, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/c-2-22a009

## Text (5 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0577, the docket of AD 2015-12-09, 2015-12-09 R1. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT SERVICE BULLETIN
MBB BK117 C-2
 
MBB BK117 C-2-22A-009
PAGE 1 of 5
2008-05-13
REVISION 01, 2009-08-03
Auto Flight System  –  Yaw-Actuator  –  Inspect Yaw-SEMA/YawSEMA
control rod for correct attachment hardware
1. Planning Information
A. Effectivity
(1) Helicopters affected: All MBB BK117 C-2.
(2) Components affected: YawSEMA control rod B673M4003102
(3) Spare Parts affected: YawSEMA control rod B673M4003102
B. Concurrent Requirements
Not applicable.
C. Reason
During the installation work on a helicopter, it has been detected that it was not possible to
establish attachment hardware on a threaded blind borehole between SEMA (Smart Electro
Mechanical Actuator) and the YawSEMA control rod without play. The reason for this loose
attachment hardware was an unfavourable adding of the tolerances of the attachment
hardware elements. The result of this was that the screw first pushed against the bottom of
the threaded blind borehole on the SEMA so that no clamping effect on the screw head could
be achieved.
Therefore, this Alert Service Bulletin prescribes the check of the Yaw-SEMA for attachment
hardware that is connected to the YawSEMA control rod without play and, if necessary, the
establishment of a connection that is free from play.
D. Description
Check attachment hardware between Yaw-SEMA and YawSEMA control rod. If necessary,
loosen attachment hardware and establish attachment hardware that is free from play.
E. Compliance
(1) The check and the possibly required correction of the attachment hardware connection
i.a.w. Section 3.B must be accomplished within the next 50 fh after receipt of this Alert
Service Bulletin.
(2) If Yaw-SEMA and YawSEMA control rod must be screwed together in future, it must
be ensured that the attachment hardware connections must be established without play
i.a.w. Section 3.B of this Alert Service Bulletin.
F. Approval
The technical content of this document is approved under the authority of
DOA No. EASA.21J.034
This document is available on the internet: www.eurocopter .com/techpub

### Page 2

ALERT SERVICE BULLETIN
MBB BK117 C-2
 
MBB BK117 C-2-22A-009
PAGE 2 of 5 REVISION 01, 2009-08-03
2008-05-13
G. Manpower
Approx. 1.5 man–hours for check of attachment hardware.
H. Weight and Balance
Not applicable.
I. Electrical Load Data
Not applicable.
J. Software Accomplishment Summary
Not applicable.
K. References
AMM MBB BK117 C-2.
L. Other Publications affected
The changes to AMM MBB BK117 C-2 and IPC MBB BK117 C-2 will be incorporated with
one of the next revisions.
M. Interchangeability of Parts
Not applicable.
2. Material Information
A. Material – Price and Availability
– The possible necessary washers EN2139-05016 and screws ISO4762-M5X16-A2-70 must
be seperately ordered by ECD.
– Consumable material PU-laquer (CM 478), hardener (CM 479), thinner (CM 480) to be
ordered as needed from the Interturbine company. CM item number i.a.w. list of
consumable materials in the AMM.
B. Support Information
Not applicable.
C. Material Necessary for Each Helicopter
Not applicable.
D. Material Necessary for Each Spare
Not applicable.

### Page 3

ALERT SERVICE BULLETIN
MBB BK117 C-2
 
MBB BK117 C-2-22A-009
PAGE 3 of 5
2008-05-13
REVISION 01, 2009-08-03
E. Reidentified Parts
Not applicable.
F. Special Tooling
Not applicable.
3. Accomplishment Instructions
A. Preliminary work:
(1) Remove vertical fin fairing i.a.w. AMM, 53-52-00, 4-1.
B. Yaw actuator:
(1) Check attachment hardware between Y aw-SEMA (1, Figure 1) and YawSEMA control
rod (2):
(a) Check manually or with a suitable aid, whether the washers (4, , Detail A,
Figure 1) can be moved.
1 If both washers (4, ) cannot be moved, install vertical fin fairing i.a.w.
AMM, 53-52-00, 4-1.
2 If one or both washers (4, ) can be moved, remove all four screws (3)
and discard. Remove grounding strip (6). Store all four washers (4) for reuse
and proceed as follows:
a Connect Yaw-SEMA (1, Detail B, Figure 1) and YawSEMA control rod (2)
with four new screws (3), the old four washers (4) and two additional
washers (5, ). Install grounding strip (6). Torque–tighten screws (3) to
5–6 Nm and apply PU-laquer (CM 478, CM 479, CM 480) onto attachment
hardware.
C. Conclusive work:
(1) Install vertical fin fairing i.a.w. AMM, 53-52-00, 4-1
(2) Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record
of the helicopter.
(3) If loose washers are detected, copy reply form sheet on page 5, fill out and send to ECD
customer support.
4. Appendix
Not applicable.

### Page 4

ALERT SERVICE BULLETIN
MBB BK117 C-2
 
MBB BK117 C-2-22A-009
PAGE 4 of 5 REVISION 01, 2009-08-03
2008-05-13
Yaw-Actuator
Figure 1
1 Yaw-SEMA
2 YawSEMA control rod B673M4003102
3 Screw ISO4762-M5X16-A2-70
4 Washer LN29932-05
5 Washer EN2139-05016
6 Grounding strip
View:
(against flight direction)
Detail A
Detail B
(with additional washers)
A
1
2
5–6 Nm
2
3X4
4
4
1
4
1
2
4X4
53X4
5
6
Check, whether the two washers can be moved.
If necessary, install one addtional washer (5) on each of these two screws.
If removed, re-attach grounding strip and apply PU-laquer (CM 478, CM 479, CM 480)
onto attachment hardware.

### Page 5

ALERT SERVICE BULLETIN
MBB BK117 C-2
 
MBB BK117 C-2-22A-009
PAGE 5 of 5
2008-05-13
REVISION 01, 2009-08-03
Telefax
To
Eurocopter Deutschland GmbH
Customer Support
FAX 0049 906 714111
Address of operator:
Reply form sheet for ASB MBB BK117 C-2-22A-009 ”Check Yaw-SEMA/YawSEMA
control rod for correct attachment”
Please completely fill out reply form sheet and send to the given FAX No.
Date:__________          Signature:___________________
Yaw-ActuatorHelicopterS/N:
Please copy page! Original page remains in Alert Service Bulletin!
Remarks:

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
