# Eurocopter Service Bulletin C-2-67A-028

Copy: No revision named ("Airbus Helicopters ASB MBB-BK117 C-2-67A-028 Rev 0"), 10 pages: PDF https://openairdocs.org/files/sha256/b9/13/b913b96bfdd1efe480fb7b7d92a2d1c6113f567eb4e81dc37332125cc2fa01bb; text https://openairdocs.org/service-documents/airbus-helicopters/c-2-67a028/file/b913b96bfdd1.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0265, the docket of AD 2021-12-16. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Service Bulletin)
- Number: C-2-67A-028
- Page: https://openairdocs.org/service-documents/airbus-helicopters/c-2-67a028

## Text (10 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0265, the docket of AD 2021-12-16. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
Valid for Version(s): C-2, C-2e.
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
ROTOR FLIGHT CONTROL - Main Rotor Actuator
Visual Inspection of the main rotor actuator
For the attention of
Revision No.  Date of issue
Revision O  2020-07-07
Summary:
Airbus Helicopters was informed about a cracked nut on the piston of a main rotor actuator
(MRA) and with ASB MBB-BK117 C-2-67A-026 a one time visual inspection had been prescribed
to check the status of the fleet.
With the current Alert Service Bulletin (ASB), Airbus Helicopters prescribes a repetitive visual
inspection every 12 months and the replacement if necessary. Furthermore it describes
instructions for all operators who have not checked the MRA nut within the last 12 months.
Compliance:
Compliance with this ASB is mandatory (with EASA AD).
ASB MBB-BK117 C-2-67A-028
Revision 0, 2020-07-07  PAGE 1 of 10
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
1  PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) MBB-BK117 C-2, C-2e, all S/N.
b) Main rotor actuator, all P/N, all S/N.
Nut
1.A.2 Non-installed equipment and parts
Main rotor actuator P/N B673M30A1002, all S/N
Longitudinal axis  P/N  B673M30A1101, all S/N
Collective axis  P/N B673M30A1203, all S/N
Lateral axis  P/N B673M30A1301, all S/N
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
Airbus Helicopters was informed of increased control forces in the collective axis in
flight. The post flight inspection revealed that a nut on the piston of the MRA had
cracked and was displaced.
As a corrective measure a repetitive inspection of the nuts on the pistons of the MRA
is introduced with this ASB. In addition, instructions for the MRA already in-service
are defined.
1.D  DESCRIPTION
Visual inspection of the nuts on the pistons of the MRA for cracks, damage, black
coloring and corrosion.
PAGE 2 of 10  Revision 0, 2020-07-07
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Inspect the MRA with more than 0 Fh (TSN/TSO/TSI-ASB MBB-BK117 C-2-67A-026) in
accordance with Section 3.B.2 before delivery but within the next 3 months after
receipt of this ASB at the latest.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
PART I  MRA with 0 to 12 months (TSN/TSO/TSI*) - Inspection
* according ASB MBB-BK117 C-2-67A-026
Inspect the MRA in accordance with Section 3.B at 12 months (+3 months tolerance).
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback
from Airbus Helicopters before the next flight with the affected MRA.
PART I  MRA with more than 12 months (TSN/TSO/TSI*) - Inspection
* according ASB MBB-BK117 C-2-67A-026
Inspect the MRA in accordance with Section 3.B within the next 3 months after
receipt of this ASB.
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback
from Airbus Helicopters before the next flight with the affected MRA.
PART III  All MRA - Repetitive Inspection
Do a repetitive Inspection of the MRA in accordance with Section 3.B every 12
months (+3 months tolerance).
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback
from Airbus Helicopters before the next flight with the affected MRA.
Non-installed equipment and parts:
Inspect MRA with more than 0 Fh (TSN/TSO/TSI-ASB MBB-BK117 C-2-67A-026) in
accordance with Section 3.B.2 before installation in the helicopter but within the
next 3 months after receipt of this ASB at the latest.
1.F  APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA No. EASA.21J.700.
Revision 0, 2020-07-07  PAGE 3 of 10
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
1.G  MANPOWER
Qualification  Mechanic  Electrician  Pilot  Others
Estimated
Man-hours  approx. 1 h
1.H  WEIGHT AND BALANCE
No effect on weight and balance.
1.J  POWER CONSUMPTION
Not affected.
1.J  SOFTWARE UPGRADES/UPDATES
Not changed.
1.K  REFERENCES
AMM MBB-BK117 C-2.
PAGE 4 of 10  Revision 0, 2020-07-07
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
1.L  OTHER AFFECTED PUBLICATIONS
Publications already updated:
Not applicable.
Publications to be updated:
ALS MBB-BK117 C-2.
AMM MBB-BK117 C-2.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2020-07-07  PAGE 5 of 10
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
None.
2.B  LOGISTIC INFORMATION
None.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
None.
2.D  MATERIAL TO BE RETURNED
None.
PAGE 6 of 10  Revision 0, 2020-07-07
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Not applicable.
З.В  WORK STEPS
З.В.1  Preliminary steps
1. Obey the "General recommendations for Working at helicopter" (AMM
00-20-02, 2-1.
2. Affix a placard in the cockpit which says that the controls must not be moved.
3. Open the crest cowling (AMM 71-11-00, 4-1).
3.B.2 Procedure
NOTE  The visual inspection requires a flashlight and a mirror. The nuts
must not be removed for the inspection.
1. Visually inspect the nuts (1, Fig. 1) on the pistons of the MRA (2) for cracks,
damage, black coloration and corrosion (for condition refer to Figure 2):
a. If there are no findings, no feedback to Airbus Helicopters is necessary,
proceed with Section 3.B.3.
b. If there are findings, take a photo of the affected nut and of the MRA and
report to Airbus Helicopters with the reply form sheet in the appendix to
support.vehicle.ahd@airbus.com. Wait for feedback from Airbus Helicopters
before the next flight with the affected MRA.
DETAIL A
1X3 -
1 Nut
2 Main rotor actuator
Visual inspection MRA
Figure 1
Revision 0, 2020-07-07  PAGE 7 of 10
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
New Nut - OK  Used Nut - OK
slight dark coloration
Used Nut - NOT OK
black coloration and corrosion
NOTE: Other shape and form of the nut depending on manufacturer is possible.
Conditions of nut
Figure 2
PAGE 8 of 10  Revision 0, 2020-07-07
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
З.В.З  Final steps
1. Close the crest cowling (AMM 71-11-00, 4-1).
2. Remove the placard in the cockpit.
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Record full compliance with this ASB, with the revision number, in the helicopter
documents.
Record full compliance with this ASB, with the revision number, in the log card of the
equipment (if a log card exists).
Please confirm compliance with this ASB:
QR-Code or hypertext link
NOTE
The recording of compliance with ASB in the R-Tex
tool does not replace the recording in the helicopter
documents
ASB MBB-BK117 C-2-67A-028
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
None.
Maintenance instructions:
Until incorporation into the ALS and into the AMM the repetitive inspection of the
MRA must be repeated in accordance with the measures mentioned in Section 3.B.
4  APPENDIX
4.А  Reply form sheet "FINDINGS"
Revision 0, 2020-07-07  PAGE 9 of 10
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-67A-028
Reply form sheet for ASB "Inspection of MRA"
FINDINGS
Nuts - NOT OK
Description:
Photo of nut and MRA attached: L
Address of operator:
Helicopter S/N:
Helicopter Flight hours (Fh):
Main rotor actuator S/N:
Longitudinal axis S/N:  _TSN/TSO:
Lateral axis S/N:  TSN/TSO:
Collective axis S/N:  TSN/TSO:
Environmental conditions in which the helicopter is operated:
• Salty
Desert
Urban
Mountain
- Others:
Send the filled out reply form sheet to:
Airbus Helicopters Deutschland GmbH
Customer Support: e-mail: support.vehicle.ahd@airbus.com
Date:_  Signature:
-OR REPLY VIA QR CODE:
PAGE 10 of 10  Revision 0, 2020-07-07
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
