# Eurocopter Service Bulletin C-2-67A-032

Copy: No revision named ("Airbus Helicopters EASB MBB-BK117 C-2-67A-032 Rev 0"), 11 pages: PDF https://openairdocs.org/files/sha256/a5/a4/a5a49750b5096436d81af9b852fc248547c8b6d055c5273bf73d05e1b6a13e10; text https://openairdocs.org/service-documents/airbus-helicopters/c-2-67a032/file/a5a49750b509.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0519, the docket of AD 2022-10-51. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Service Bulletin)
- Number: C-2-67A-032
- Page: https://openairdocs.org/service-documents/airbus-helicopters/c-2-67a032

## Text (11 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0519, the docket of AD 2022-10-51. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
Valid for Version(s): C-2, C-2e.
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
ROTOR FLIGHT CONTROL - General
Inspection for Conformity of the Flexballs
For the attention of
Revision No.  Date of issue
Revision O  2022-04-29
Summary:
With this Emergency Alert Service Bulletin (EASB), Airbus Helicopters introduces a one-time
inspection for conformity of the Flexballs to replace them if necessary.
Compliance:
It is mandatory to comply with this EASB.
Revision 0, 2022-04-29  PAGE 1 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
1  PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) MBB-BK117 C-2, C-2e, all S/N.
b) Flexball M/R-control longitudinal  P/N 78CF-9919
Flexball M/R-control collective  P/N 78CF-9262
Flexball M/R-control lateral  P/N 78CF-9920
Flexball-T/R  P/N 78CF-10009
Flexball M/R-control longitudinal
Flexball M/R-control collective
Flexball M/R-control lateral
Flexball T/R
1.A.2 Non-installed equipment and parts
See 1.A.1.b).
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
Airbus Helicopters was informed by the supplier about a non-conformity during its
production of the Flexball. This non-conformity can lead to increased friction inside
the Flexball up to jamming, which can result in a malfunction during operation.
Analysis revealed that only specific Flexballs, that were manufactured after
November 22, 2021, are affected (see Section 4.A).
1.D  DESCRIPTION
Examine the documents. If necessary, inspect for conformity of the Flexballs and
replace them.
PAGE 2 of 11  Revision 0, 2022-04-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
1.E  COMPLIANCE
1.E.1 Compliance at helicopter manufacturer level
Helicopters/installed equipment and parts:
Airbus Helicopters makes it mandatory to comply with the instructions of Section 3.
of this EASB before the delivery of the helicopter.
Non-installed equipment and parts:
Airbus Helicopters makes it mandatory to comply with the instructions of Section
3.B.4 of this EASB before the delivery or installation of the equipment.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
Airbus Helicopters makes it mandatory to comply with the instructions of Section 3.
of this EASB before the next flight of the helicopter. If an affected Flexball, as shown
in Section 4.A, is installed, one ferry flight to the maintenance center is permitted.
Non-installed equipment and parts:
Airbus Helicopters makes it mandatory to comply with the instructions of Section
3.B.4 of this EASB before installation or before August 31, 2022 whichever occurs
first.
1.F  APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA No. EASA.21J.700.
1.G  MANPOWER
Qualification  Mechanic  Electrician  Pilot  Others*
0.5 h
0.5 h
(inspection)
Estimated  8 h
Man-hours  (replacement
per unit, if
necessary)
* CAMO (or equivalent)
1.H  WEIGHT AND BALANCE
Not changed.
1.l  POWER CONSUMPTION
Not affected.
Revision 0, 2022-04-29  PAGE 3 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
SOFTWARE UPGRADES/UPDATES
None.
1.K  REFERENCES
IN 3643-1-00: Introduction of the digital Service Bulletin reporting service R-TEX
AMM.
1.L  OTHER AFFECTED PUBLICATIONS
Not affected.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
PAGE 4 of 11  Revision 0, 2022-04-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
None.
2.B  LOGISTIC INFORMATION
None.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
Material supplied by the operator:
The Flexball could be affected by a replacement. If so, it can be ordered at Airbus
Helicopters, Dept. Spares Order Administration.
Please reference the following number in the customer order:
EASB-MBB-BK117-C-2-67A-032
No.  Keyword  Qty  New P/N  Old P/N  Rem.
Flexball M/R-control  78CF-9919
1
longitudinal  78CF-9919
Flexball M/R-control  1  78CF-9262
2
collective  1  78CF-9262
Flexball M/R-control  78CF-9920
lateral  1  78CF-9920
1  78CF-10009
4  Flexball-T/R
1  78CF-10009
Remark:
A = Send back to the supplier as shown in Section 2.D.
2.D  MATERIAL TO BE RETURNED
Send the removed Flexball back to the supplier:
Triumph Controls France
- Attn. J. Kassardjian -
2 avenue de la Carelle
94290 Villeneuve Le Roi - France
Revision 0, 2022-04-29  PAGE 5 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Obey the "General Recommendations for Working at Helicopters" (AMM 00-20-02, 2-1).
З.В  WORK STEPS
3.B.1 Examination of the documents of installed equipment and parts
1. Examine the documents to identify if an affected Flexball, as shown in Section 4.A,
was installed after November 22, 2021:
a. If an affected Flexball (2, 3, 4, Fig. 1 and 2, Fig. 2) was installed, proceed in
accordance with Section 3.B.3.
b. If the installed Flexballs (2, 3, 4, Fig. 1 and 2, Fig. 2) are not listed in Section
4.A, they can be considered as not affected and do not need to be replaced.
Proceed in accordance with Section 3.C.
c. If it cannot be identified if an affected Flexball (2, 3, 4, Fig. 1 and 2, Fig. 2) was
installed, proceed in accordance with Section 3.B.2.
З.В.2  Inspection for conformity of the Flexball on the helicopter
1. If necessary, remove the bottom access cover (AMM 52-40-00, 4-2).
2. Remove the floor access covers as necessary (AMM 52-50-00, 4-3).
3. Examine the S/Ns on the labels (1, Fig. 1 and 1, Fig. 2) of the Flexballs (2, 3, 4, Fig. 1
and 2, Fig. 2).
4. Identify if the S/Ns of the installed Flexballs (2, 3, 4, Fig. 1 and 2, Fig. 2) are listed
in Section 4.A:
a. If an installed Flexball (2, 3, 4, Fig. 1 and 2, Fig. 2) is affected as shown in
Section 4.A, proceed in accordance with Section 3.B.3.
b. If none of the installed Flexballs (2, 3, 4, Fig. 1 and 2, Fig. 2) is listed in
Section 4.A, they can be considered as not affected and do not need to be
replaced. Install the removed covers (AMM 52-40-00, 4-2 and
AMM 52-50-00, 4-3). Proceed in accordance with Section 3.C.
c. If the installed Flexballs (2, 3, 4, Fig. 1 and 2, Fig. 2) cannot be identified,
proceed in accordance with Section 3.B.3.
3.B.3 Replacement of the Flexball
NOTE  It is only necessary to replace the affected Flexballs.
1. Replacement of the Flexballs of the main rotor controls:
a. Remove the affected Flexballs (2, 3, 4, Fig. 1) (AMM 67-10-00, 4-5).
b. Fill out the reply form sheet as shown in Section 4.B.
c. Send the affected Flexballs (2, 3, 4, Fig. 1) back as shown in Section 2.D.
PAGE 6 of 11  Revision 0, 2022-04-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
d. Install the serviceable Flexballs (2, 3, 4, Fig. 1) (AMM 67-10-00, 4-5).
2. Replacement of the Flexball of the tail rotor controls:
a. Remove the affected Flexball (2, Fig. 2) (AMM 67-20-00, 4-7).
b. Fill out the reply form sheet as shown in Section 4.B.
c. Send the affected Flexball (2, Fig. 2) back as shown in Section 2.D.
d. Install a serviceable Flexball (2, Fig. 2) (AMM 67-20-00, 4-7).
3. If removed, install the bottom access cover (AMM 52-40-00, 4-2).
4. Install the removed floor access covers (AMM 52-50-00, 4-3).
5. Proceed in accordance with Section 3.C.
Revision 0, 2022-04-29  PAGE 7 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
1 Label
2 Flexball M/R-control longitudinal
3 Flexball M/R-control collective
4 Flexball M/R-control lateral
Date
P/N TCF:  Amat
S/N
Inspection for conformity of the Flexball on the helicopter - Main Rotor Controls
Figure 1
PAGE 8 of 11  Revision 0, 2022-04-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
АД
View A
Date
P/N TCF:  Amat
S/N
1 Label
2 Flexball T/R
Inspection for conformity of the Flexball on the helicopter - Tail Rotor Controls
Figure 2
Revision 0, 2022-04-29  PAGE 9 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
3.B.4 Work steps for non-installed equipment or parts
1. Examine if a Flexball was received after November 22, 2021:
a. If a Flexball was received after November 22, 2021, proceed in accordance
with Section 3.B.4.2.
b. If none Flexball was received after November 22, 2021, the Flexballs can be
considered as not affected. Proceed in accordance with Section 3.C.
2. Examine if an affected S/N, as shown in Section 4.A, is on stock.
If so,  - fill out the reply form sheet as shown in Section 4.B
- send the affected Flexball back as shown in Section 2.D.
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Record full compliance with this EASB, with the revision number, in the helicopter
documents.
Record full compliance with this EASB, with the revision number, in the log card of
the equipment (if a log card exists).
Record the full compliance with this EASB (see IN 3643-1-00 for instructions):
QR-Code or hypertext link
NOTE
The recording of compliance with EASBs in the R-Tex
tool does not replace the recording in the helicopter
documents.
EASB MBB-BK117 C-2-67A-032
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
None.
4  APPENDIX
4.А  List of affected Flexballs
Nomenclature  P/N  S/N
Flexball M/R-control longitudinal
Flexball M/R-control collective
Flexball M/R-control lateral
Flexball-T/R
78CF-9919  From 1666 up to 1702 inclusive
78CF-9262  From 1609 up to 1658 inclusive
78CF-9920  From 1637 up to 1656 inclusive
78CF-10009  From 1147 up to 1167 inclusive
List of affected Flexballs
4.B Reply form sheet
PAGE 10 of 11  Revision 0, 2022-04-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
EASB MBB-BK117 C-2-67A-032
Reply form sheet
for EASB MBB-BK117 C-2-67A-032 Revision 0 "Inspection for Conformity of the Flexballs"
Please completely fill out reply form sheet and send it to the given e-mail.
To
Airbus Helicopters
SERVICE BULLETIN GERMANY
e-mail: support.technical-bulletins.ahd@airbus.com
Address of the operator:
Helicopter S/N:
Flexball P/N:  Flexball S/N:
Date:  Signature:
Please copy page! Original page remains in EASB!
Revision 0, 2022-04-29  PAGE 11 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
