# Eurocopter Service Bulletin C-2-85A-051

Copy: No revision named ("Airbus ASB MBB-BK117 C-2-85A-051 Rev 0"), 9 pages: PDF https://openairdocs.org/files/sha256/e4/05/e4052e846337614555b76c586da2b8a571dbcc31d03410f62d6be144a8c1cd9d; text https://openairdocs.org/service-documents/airbus-helicopters/c-2-85a051/file/e4052e846337.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0630, the docket of AD 2025-18-04. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Service Bulletin)
- Number: C-2-85A-051
- Page: https://openairdocs.org/service-documents/airbus-helicopters/c-2-85a051

## Text (9 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0630, the docket of AD 2025-18-04. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
Valid for Version(s): C-2, C-2e.
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
OPTIONAL EQUIPMENT - External Mounted Hoist System
Determination/Recalculation of performed hoist cycles of the hoist boom
assembly
For the attention of
Revision No.  Date of issue
Revision 0  2023-01-31
Summary:
This Alert Service Bulletin (ASB) describes a determination/recalculation of the performed hoist
cycles of the hoist boom assembly and an applicable transition period.
Compliance:
It is mandatory to comply with this ASB.
Revision 0, 2023-01-31  PAGE 1 of 9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
1  PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) MBB-BK117 C-2, C-2e, all S/N.
b) Hoist boom assembly P/N 44307-500
1.A.2 Non-installed equipment and parts
See Section 1.A.1.b).
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
In consideration of new fatigue calculation for external load a dedicated Service Life
Limit (SLL) and an additional Inspection (CHK = Check) criterion of the hoist boom
assembly were introduced. This ASB describes a determination/recalculation of the
performed hoist cycles of the hoist boom assembly and an applicable transition
1.D  DESCRIPTION
Determine and, if necessary, recalculate the performed hoist cycles of the hoist
boom assembly. If necessary, inspect the hoist boom assembly.
PAGE 2 of 9  Revision 0, 2023-01-31
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Not affected.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
Part I: Determination and, if necessary, recalculation of the performed hoist cycles
of the hoist boom assembly
Within four weeks after receipt of this ASB determine the performed hoist cycles of
the hoist boom assembly in accordance with Section 3.B.1.
Part II: Inspection of the hoist boom assembly
Definition:
Group 1: Hoist boom assembly with more than or equal to 3330 hoist cycles since
manufacturing (Time Since New (TSN)) and without a performed overhaul.
Group 2: Hoist boom assembly with more than or equal to 3330 hoist cycles since
the last overhaul (Time Since Overhaul (TSO)).
Group 3: Hoist boom assembly with less than 3330 hoist cycles since manufacturing
(TSN) or the last overhaul (TSO).
Compliance:
As transition period within the next 18 months after receipt of this ASB, the
following inspection intervals are applicable:
EFFECTIVITY  Group 1 and Group 2
The hoist boom assembly must be inspected before the next hoist operation:
- in accordance with Section 3.B.2 and then every 30 hoist cycles of the hoist boom
assembly in accordance with Section 3.B.2 until the 18 months after receipt of
this ASB have been reached.
or
- in accordance with the ALS.
EFFECTIVITY  Group 3
As soon as the 3330 hoist cycles of the hoist boom assembly are reached, the hoist
boom assembly must be inspected like Group 1 and Group 2 hoist boom assembly.
EFFECTIVITY  All
18 months after receipt of this ASB, the hoist boom assembly must be inspected in
accordance with the ALS.
Non-installed equipment and parts:
See Section 1.E.2 - Helicopters/installed equipment and parts.
Revision 0, 2023-01-31  PAGE 3 of 9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
ASB issued
Determine and, if necessary, recalculate the performed hoist cycles of the hoist
boom assembly as shown in Section 3.B.1. Obey the SLL in the ALS.
(Within four weeks after receipt of this ASB)  23330
hoist cycles of the
No  hoist boom assembly  since manufacturing  Yes
Part I  (TSN) and without a  performed
overhaul?
≥ 3330
hoist cycles of the  Yes
hoist boom assembly
since the last overhaul
(TSO)?
No
(Within 18 months after receipt of this ASB)  Before the next hoist operation:
Or
The 3330
hoist cycles of the
Part II  hoist boom assembly  are reached within 18  Yes  Inspect the hoist boom assembly
months after receipt  in accordance with Section 3.B.2.
of this ASB?
Within 18 months after receipt of
this ASB inspect the hoist boom
No  assembly every 30 hoist cycles of
the hoist boom assembly in
accordance with Section 3.B.2.
Inspect the hoist boom assembly in accordance with the ALS.
Flowchart
PAGE 4 of 9  Revision 0, 2023-01-31
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
1.F  APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA No. EASA.21J.700.
1.G  MANPOWER
Qualification  Mechanic  Electrician  Pilot  Others*
0.5 h
(determination/
Estimated  recalculation)
Man-hours  4 h
(inspection, it
necessary)
* CAMO (or equivalent)
1.H  WEIGHT AND BALANCE
Not changed.
POWER CONSUMPTION
Not affected.
1.J  SOFTWARE UPGRADES/UPDATES
Not changed.
1.K  REFERENCES
AMM 00-20-02, 2-1
ALS Revision 002 (2022.03.30) or later approved ALS revisions
Goodrich CMM 25-00-21-1 Revision 16 or later revisions validated by Airbus
Helicopters (see List Of Applicable Publication (LOAP)/ORION)
Goodrich CMM 25-00-50-1 Revision 3 or later revisions validated by Airbus
Helicopters (see LOAP/ORION)
IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L  OTHER AFFECTED PUBLICATIONS
Not affected.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2023-01-31  PAGE 5 of 9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
None.
2.B  LOGISTIC INFORMATION
None.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
None.
2.D  MATERIAL TO BE RETURNED
None.
PAGE 6 of 9  Revision 0, 2023-01-31
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Obey the "General Recommendations for Working at Helicopters" (AMM 00-20-02, 2-1).
З.В  WORK STEPS
Part I: Determination and, if necessary, recalculation of the performed hoist cycles
of the hoist boom assembly
3.В.1  Determination/Recalculation of the performed hoist cycles of the hoist boom
assembly
NOTE  For hoist cycle definition refer to the ALS.
NOTE  Hoist boom assembly which has reached the SLL according to the
ALS must be removed from service.
1. Determination of the performed hoist cycles of the hoist boom assembly:
a. If the hoist cycles of the hoist boom assembly are known, proceed with
Section 3.C to confirm accomplishment of Part I.
b. If the hoist cycles of the hoist boom assembly are unknown, proceed with
Section 3.B.1.2.
2. Recalculation of the hoist cycles of the hoist boom assembly depending on the
Flight hours (Fh) or TSN:
a. If the Fh of the hoist boom assembly are known:
- Multiply the hoist boom assembly Fh by two and use the result as hoist
cycles for the hoist boom assembly.
Example: The affected hoist boom assembly was installed on a helicopter
for 60:10 Fh (round up to the next full Fh).
Total: 61 × 2 = 122 hoist cycles for the hoist boom assembly
Proceed with Section 3.B.1.3.
b. If the Fh of the hoist boom assembly are unknown:
- Multiply the TSN (months) of the hoist boom assembly with 50 and use the
result as hoist cycles for the hoist boom assembly since manufacturing.
Example: TSN of the affected hoist boom assembly is 8 years and 3 months
and 10 days (round up to the next full month) (8 x 12 + 4 = 100 months).
Total: 100 (months) x 50 (hoist cycles of the hoist boom assembly/month)
= 5000 hoist cycles for the hoist boom assembly since manufacturing
Proceed with Section 3.B.1.3.
Revision 0, 2023-01-31  PAGE 7 of 9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
3. Only if an overhaul was done:
a. If the Fh since the last overhaul (TSO) of the hoist boom assembly are known:
- Multiply the hoist boom assembly Fh since the last overhaul (TSO) by two
and use the result as hoist cycles for the hoist boom assembly since the
last overhaul (TSO).
Example: The Fh since the last overhaul (TSO) of the affected hoist boom
assembly are 09:05 Fh (round up to the next full Fh).
Total: 10 × 2 = 20 hoist cycles for the hoist boom assembly since the last
overhaul (TSO)
Proceed with Section 3.B.1.4.
b. If the Fh since the last overhaul (TSO) of the hoist boom assembly are
unknown:
- Multiply the TSO (in months) of the hoist boom assembly with 50 and use
the result as hoist cycles for the hoist boom assembly since the last
overhaul (TSO).
Example: The TSO of the affected hoist boom assembly is 11 months and
12 days (round up to the next full month) (11 + 1 = 12 months).
Total: 12 (months) x 50 (hoist cycles of the hoist boom assembly/ month)
= 600 hoist cycles for the hoist boom assembly since the last overhaul
- Proceed with Section 3.B.1.4.
4. Use the flowchart in Section 1.E.2 and proceed as shown in the flowchart.
Part II: Inspection of the hoist boom assembly
3.B.2  Inspection of the hoist boom assembly
Inspect the hoist boom assembly in accordance with the Goodrich CMM 25-00-21-1
or 25-00-50-1 (6 months inspection).
PAGE 8 of 9  Revision 0, 2023-01-31
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
ASB MBB-BK117 C-2-85A-051
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Part I: Determination and, if necessary, recalculation of the performed hoist cycles
of the hoist boom assembly
Record compliance with Part I of this ASB, with the revision number, in the
helicopter documents.
Record compliance with Part I of this ASB, with the revision number, in the log card
of the equipment (if a log card exists).
Part II: Inspection of the hoist boom assembly
Record full compliance with this ASB, with the revision number, in the helicopter
documents.
Record full compliance with this ASB, with the revision number, in the log card of the
equipment (if a log card exists).
Record the full compliance with this ASB (see IN 3785-1-00 for instructions):
QR-Code or hypertext link
NOTE
The recording of compliance with ASBs in the SB
Insight tool does not replace the recording in the
helicopter documents.
ASB MBB-BK117 C-2-85A-051
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
None.
4  APPENDIX
None.
Revision 0, 2023-01-31  PAGE 9 of 9
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
