# Airbus Helicopters Alert Service Bulletin EC120-04A008

Copy: No revision named ("Airbus Helicopters ASB EC120-04A008 Rev 0"), 10 pages: PDF https://openairdocs.org/files/sha256/d0/2e/d02e74d97cfb9cd95d6cf83c360992a4c5543b9fa08f2fa4aeb82e73ebfb5cf2; text https://openairdocs.org/service-documents/airbus-helicopters/ec120-04a008/file/d02e74d97cfb.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0239; AD 2020-12-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC120-04A008
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec120-04a008

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-12-02](https://openairdocs.org/ad/2020-12-02.md), effective Jul 13, 2020: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec120-04a008/proposed.md).

## Text (10 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0239; AD 2020-12-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
Civil version: B
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
LIMITATIONS - Tail Rotor Hub
Introduction of a new part number and re-identification of the
Equipped Blades of the Tail Rotor Hub
For the attention of
Revision No.  Date of issue
Revision O  2018-07-18
Summary:
As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a new part
number for these equipped blades.
This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life Limit
(SLL) of the equipped blades mentioned in the Airworthiness Limitations Section (ALS).
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2018-07-18  Page 1/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
1-  PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
EC120 version B helicopters with equipped blades part number C642A0300103 whose serial numbers are
listed in Appendix 4.A.,
NOTE 1
Refer to the Log Card of the Tail Rotor Hub (TRH) to identify
the actual modification status of the helicopter.
1.A.2. Non-installed equipment or parts
- Equipped blade P/N C642A0300103 whose serial numbers are listed in Appendix 4.A.
- Tail Rotor Hub P/N C642A0110054 or C642A0110056 equipped with at least one blade
P/N C642A0300103.
P/N
Serial number
NOTE 2
The part number and serial number of the equipped blade
can be found on:
- the equipped blade,
- Form 1 for the equipped blade,
- the Tail Rotor Hub Log Card.
The figure above is provided for reference, to show the
location of the part number and serial number on an
equipped blade.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a
new part number for these equipped blades.
This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life
Limit (SLL) of the equipped blades mentioned in the Airworthiness Limitations Section (ALS).
Revision 0 2018-07-18  Page 2/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists in:
- checking the part number of the equipped blades of the Tail Rotor Hub (C642A0300103 + serial number)
and the associated Tail Rotor Hubs,
- completing the Tail Rotor Hub Log Card for the equipped blades concerned,
- re-identifying the equipped blades of the Tail Rotor Hubs concerned.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/Installed equipment or parts:
Not applicable.
Non-installed equipment or parts:
Before delivery of the equipped blades refer to Form1 to check the part number and the serial numbers of
the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial
numbers in Appendix 4.A. to determine whether they are concerned:
- for the serial numbers concerned:
• comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN,
. edit a new Form 1.
Before delivery of the Tail Rotor Hub refer to log card for the Tail Rotor Hub to check the part number and
the serial numbers of the equipped blades. Compare the serial numbers of the equipped blades with the list
of serial numbers in Appendix 4.A. to determine whether they are concerned:
- for the serial numbers concerned, Airbus Helicopters makes compliance with paragraph 3. of this
ALERT SERVICE BULLETIN mandatory.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.
The work on the helicopter is to be performed by the operator.
Revision 0 2018-07-18  Page 3/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
- Within 12 months from receipt of this ALERT SERVICE BULLETIN, issued on the date indicated in the
page footer, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of the
installed equipped blades. Compare the serial numbers of the equipped blades with the list of serial
numbers in Appendix 4.A. to determine whether they are concerned:
• Completion of the documentation
.. For the serial numbers concerned, comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN.
.. For the serial numbers not concerned, no additional action is required.
- No later than the next disassembly of the Tail Rotor Hub:
• Re-identification of the equipped blades
.. For the serial numbers concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.
NOTE 3
The disassembly of the Tail Rotor Hub is scheduled at
1000 flight hours // 24 months to complete the detailed
check of the TRH blade assemblies.
Non-installed equipment or parts:
For an equipped blade alone:
- Before installation, refer to Form1 to check the part number and the serial number of the equipped blades in
stock. Compare the serial number of the equipped blade with the list of serial numbers in Appendix 4.A., to
determine whether it is concerned:
. for the serial number concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.
For Tail Rotor Hub:
- Before installation, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of
the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial
numbers in Appendix 4.A. to determine whether they are concerned:
for the serial numbers concerned, comply with paragraph 3. of this ALERT SERVICE BULLETIN.
Revision 0 2018-07-18  Page 4/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification COA08001 approved on June 1, 2018 by EASA for civil
version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on
July 18, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER
& For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualification:
Qualification:
- 1 Mechanical Technician.
The time for the operations is indicated for reference, for a standard configuration.
Time for the operation:
- Approximately 30 minutes for the Mechanical Technician (for an equipped blade removed).
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0 2018-07-18  Page 5/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
1.K. REFERENCES
The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
MTC: 20.02.07.403: Use of Vernelec 43022 varnish - Electrical bonding,
MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning,
MTC: 20.04.04.403: Touch-up of protective treatment with ALODINE 1200 - Surface treatment before
painting,
MTC: 20.08.05.101: Drafting and updating the Log Card (FM) General rules applicable to aircraft,
MTC: 20.08.05.103: Monitoring of parts in operation - marking - service life customization - General rules
applicable to aircraft,
MTC: 20.60.00.401: General Recommendations - Blades standard practices,
AMM: Aircraft Maintenance Manual,
ALS: Airworthiness Limitations Section: (04-10-00 Airworthiness Limitations (SLL)),
MSM: Master Servicing Manual.
1.L. OTHER AFFECTED PUBLICATIONS
The modification will be integrated into the following manual:
ALS.
This document will be issued again at a later date.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
Tail Rotor Hub equipped blades P/N C642A0300103 and P/N C642A0300105 are interchangeable.
Mixability:
Mixing Tail Rotor Hub equipped blades P/N C642A0300103 and P/N C642A0300105 is permitted.
Revision 0 2018-07-18  Page 6/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
2.  EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Not applicable.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:
Designation  Qty  Consumable P/N  Item
Cleaning agent  AIR  METHYL ETHYL KETONE  217  1
Chemical transformation agent  A/R  ALODINE1200  316  2
Varnish  A/R  ECS2228.10  514  3
The products can be ordered separately from the company KLX AEROSPACE SOLUTIONS.
Internet address:  https://www.kixaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
Special tools:
As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:
Designation  Qty  Tool P/N or equivalent  Item
Vibration scriber  1  Commercial reference  ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2018-07-18  Page 7/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Read and comply with the general instructions concerning standard practices applicable to blades as per
Work Card 20.60.00.401 (MTC).
3.B. WORK STEPS
NOTE
The serial number of an equipped blade remains unchanged
following  the  application of this ALERT SERVICE
BULLETIN.
3.B.1. Fill in the Log Card (FM)
- On the Log Card:
. cross out the part number of the equipped blade, leaving it legible,
. note the new part number,
. record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.
3.B.2. Re-identification of the equipped blades
- Clean the area containing the part number and serial number of the equipped blades using the cleaning
agent (1) as per Work Card 20.04.01.102 (MTC).
- Using a vibration scriber (zz) and as per Work Card 20.08.05.103 (MTC):
. cross out the part number C642A0300103, leaving it legible,
. mark the new part number C642A0300105 under the serial number.
- Protect the vibration scribed zones using chemical conversion material (2) as per Work Card
20.04.04.403 (MTC).
- Apply varnish (3) as per Work Card 20.02.07.403 (MTC).
Equipped
C642A  blade
0300105
3
Figure 1
- Record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.
Revision 0 2018-07-18  Page 8/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
- For installed equipment or parts:
When complying with paragraph 3.B.1.:
• record compliance with paragraph 3.B.1. of this ALERT SERVICE BULLETIN, with the revision number on
the Tail Rotor Hub Log Card.
. note: « paragraph 3.B.2. of the ALERT SERVICE BULLETIN No. 04A008 must be complied with
mandatorily during the next disassembly of the Tail Rotor Hub» on the Tail Rotor Hub Log Card.
When complying with paragraph 3.B.2.:
• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number on the Tail
Rotor Hub Log Card.
- For non-installed equipment or parts:
• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number, on the Tail
Rotor Hub Log Card
Identification of modifications on equipment or parts:
Identify the equipped blades of the Tail Rotor Hub using the table below and Work Card 20.08.05.103 (MC):
Designation  Former P/N  New P/N  MOD  Type of marking
Equipped blade  C642A0300103  C642A0300105  Vibration scribing
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Refer to the Master Servicing Manual (MSM) in effect.
Refer to the Aircraft Maintenance Manual (AMM) in effect.
The deadlines for new part numbers for the equipped blades on the Tail Rotor Hub in the Airworthiness
Limitations Section (ALS) are identical to the old part numbers. The Airworthiness Limitations Section (ALS)
will incorporate the new part numbers as part of a future revision.
Revision 0 2018-07-18  Page 9/10
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-04A008
4.  APPENDIX
4.A. Tail Rotor Hub Equipped blade (P/N) C642A0300103
serial numbers (S/N)
M5596  M5630  M5725
M5598  M5631  M5726
M5599  M5632  M5730
M5600  M5633  M5732
M5601  M5634  M5735
M5602  M5635  M5736
M5603  M5636  M5737
M5604  M5637  M5739
M5605  M5643  M5741
M5606  M5644  M5742
M5607  M5645  M5747
M5608  M5646  M5749
M5609  M5647  M5750
M5610  M5648  M5752
M5611  M5652  M5753
M5612  M5656  M5754
M5613  M5658
M5614  M5659
M5615  M5663
M5616  M5664
M5617  M5667
M5618  M5669
M5619  M5670
M5620  M5673
M5621  M5674
M5622  M5675
M5623  M5716
M5624  M5717
M5625  M5719
M5626  M5720
M5627  M5721
M5628  M5723
M5629  M5724
Revision 0  2018-07-18  Page 10/10
This document is available on the Internet: www.air  ushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
