# Airbus Helicopters Alert Service Bulletin EC120-05A019

Copy: No revision named ("Airbus Helicopters ASB EC120-05A019 Rev 0"), 9 pages: PDF https://openairdocs.org/files/sha256/17/f3/17f3ff2257f1fd255cc0361b4ce9f60083eaa54693882ba05df47713edd9237c; text https://openairdocs.org/service-documents/airbus-helicopters/ec120-05a019/file/17f3ff2257f1.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1114, the docket of AD 2021-04-21. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC120-05A019
- Latest revision known: EC120-05A019, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec120-05a019

## Text (9 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1114, the docket of AD 2021-04-21. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
Civil version(s): B
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TIME LIMITS - MAINTENANCE CHECKS - Main Rotor Hub
Inspection of rotating and non-rotating scissors bolts
ATA: 62
For the attention of
Revision No.  Date of issue
Revision 0  2019-06-11
Summary:
Airbus Helicopters was informed that during a pre-flight check one of the compass attachment bolts was found to
be broken.
Corrosion beyond the permitted levels was observed on the broken bolt, and the other bolt was twisted
Thus, this ALERT SERVICE BULLETIN consists in:
- making sure that the bolts of the rotating and non-rotating scissors do not rotate,
- if necessary, replacing the attachment bolts).
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2019-06-11  Page 1/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
EC120 version B helicopters equipped with a scissors assembly P/N C623A21101 at any point.
1.A.2. Non-installed equipment or parts
Scissors assembly P/N C623A21101 at any point.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Airbus Helicopters was informed that during a pre-flight check one of the compass attachment bolts was
found to be broken.
Corrosion beyond the permitted levels was observed on the broken bolt, and the other bolt was twisted.
Technical analysis of the event concluded that undetected seizure could block the pivot link of the scissors
and cause a bolt to break.
Airbus Helicopters makes it mandatory to inspect the attachment bolts of the rotating and stationary scissors.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists in:
- making sure that the bolts of the rotating and non-rotating scissors do not rotate,
- if necessary, replacing the attachment bolts).
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3.B.2.a. of this ALERT
SERVICE BULLETIN before the helicopter is delivered.
Then,
During every "15 FH // 7 D check", comply with paragraph 3.B.2. except for paragraph 3.B.2.a.
Non-installed equipment or parts:
Not applicable.
Revision 0 2019-06-11  Page 2/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
1.E.2. Compliance in service
The work must be performed on the helicopter by the operator.
Helicopters/installed equipment or parts:
Within 50 flying hours following receipt of this ALERT SERVICE BULLETIN, comply with paragraph 3.B.2.a.
Then,
During every "15 FH // 7 D check", comply with paragraph 3.B.2. except for paragraph 3.B.2.a.
Non-installed equipment or parts:
During installation on the helicopter, comply with paragraph 3.B.2.a.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on
June 05, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff
qualifications:
Qualifications:
- 1 Mechanical Technician,
- 1 Pilot appropriately trained and certified, in compliance with the local regulations in force.
anguinded Man hours.  The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter
Estimated Man-hours:
- approximately 5 minutes to apply the red line,
- approximately 5 minutes for the inspection,
- if necessary, approximately 4 hours for the detailed inspections and replacement of the bolts, for the
Mechanical Technician.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter
configuration.
The estimated helicopter downtime is:
- Half a day if the bolts need to be replaced
Revision 0 2019-06-11  Page 3/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
AMM: 62-00-00,3-1: General Safety Instructions - Main Rotor
AMM: 62-00-00,6-2: Checks after Maintenance Work - Main Rotor
AMM: 62-32-00,4-1: Removal/Installation - Flared housing / Swashplates / Hub Couplings
AMM: 62-32-00.6-1: Detailed Check - "Diapason" Scissors Link
AMM: 62-32-00,6-2: Detailed check - Scissors link
AMM: 62-32-00,6-3: Detailed check - Scissors link bush
AMM: 62-32-00,6-7: Check - Hard spot on articulation of the scissors links
AMM: 71-00-00,3-1: General Safety Instructions - Power Plant
AMM: 71-10-00,4-1: Removal / Installation - Upper cowlings
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2019-06-11  Page 4/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For any information on the price of modification kits and/or components or for assistance, contact the Airbus
Helicopters Network Sales and Customer Relations Department.
Availability
Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's
request.
Procurement
Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specity the mode of
transport, the destination and the serial numbers of the
helicopters to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or parts to be ordered separately:
Old
Key Word  Qty  New P/N  Item  P/N  →  Instruction
Bolt  AR  DHS411-101.2118  1  DHS411-101.2118  Discard
Revision 0 2019-06-11  Page 5/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
Consumables to be ordered separately:
As per Work Cards and/or Tasks specified in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from BDSI.
Website:  https://www.boeingdistribution.com
Telephone:  +1.305.925.2600
Fax:  +1.305.507.7191
AOG:  +1.305.471.8888
AOG email:  AOGdesk@Boeingdistribution.com
Special tools:
As per Work Cards and/or Tasks specified in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2019-06-11  Page 6/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Task 62-00-00,3-1 (AMM), read and comply with the general mechanical instructions.
- As per Task 71-00-00,3-1 (AMM), read and comply with the general power plant installation instructions.
- As per Work Card 20-07-03-406 (MTC), read and comply with the instructions applicable when working on
an aircraft electrical circuit and power generating systems.
3.B. WORK STEPS
The procedure for only one scissors is described. Apply the same procedure on the other scissors.
3.B.1. Preliminary steps
- Install appropriate access equipment.
- Disconnect all electrical power supplies.
- Turn the main rotor blades to enable adequate access to the working area above the engine.
- If necessary, remove the engine cowling as per Task 71-10-00,4-1 (AMM).
3.B.2. Procedure (Figure 1)
CAUTION
TAKE ALL NECESSARY PRECAUTIONS TO
PREVENT FOREIGN OBJECTS FROM ENTERING
THE ROTOR MAST SHAFT DURING THE ENTIRE
OPERATION.
CAUTION
DO NOT PRESSURIZE THE HYDRAULIC CIRCUIT
AND DO NOT ACTIVATE THE FLIGHT CONTROLS
DURING THE ENTIRE TASK.
3.B.2.a. Application of the red line
Make the T1 and T2 lines with red paint on the scissors bolts as indicated in Figure 1.
Revision 0 2019-06-11  Page 719
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
3.B.2.b. Inspection
- If the lines T1 and T2 are aligned:
. resume flights.
- If the lines T1 and T2 are not aligned:
. perform a detailed inspection, on a workbench, of:
.. the delta-shaped scissors link (c) as per Task 62-32-00,6-1 (AMM),
.. the scissors link (d) as per Task 62-32-00,6-2 (AMM),
.. the bush (e) of the scissors link as per Task 62-32-00,6-3 (AMM),
. replace the bolts) (a):
NOTE
In case of doubt or misalignment, contact Airbus Helicopters
before replacing the bolts:
- Fax: +33 (0)4.42.85.99.66.
- E-mail: support.technical-dyncomp.ah@airbus.com
.. discard the bolts) (a).
.. install the scissors (b) using the bolts) (1) as per Task 62-32-00,4-1 (AMM).
.. check for hard points on the scissors link hinge (b) as per Task 62-32-00,6-7 (AMM).
clean the existing T1 and T2 red lines,
. comply with paragraph 3.B.2.a.
3.B.3. Final steps
- If the engine cowling was removed, install it as per Task 71-10-00,4-1 (AMM).
- If the bolts were replaced, perform the checks after intervention as per Task 62-00-00,6-2 (AMM).
- Clean and repair the work areas and the helicopter as per Work Card 20-07-03-408 (MTC).
- Connect all electrical power sources again.
- Clear the access equipment.
- Set the helicopter into flight configuration.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the MRH (Main
Rotor Hub) Log Card (FM).
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2019-06-11  Page 8/9
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC120-05A019
T2
a
T1
T2
T2
• T1
T2
Return to paragraph 3.B.2.
Figure 1
Revision 0 2019-06-11  Page 9/9
This document is available on the internet: www.airbushelicopters.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
