# Eurocopter Alert Service Bulletin EC120-25A031

Copy: No revision named ("C-ASB EC120-25A031 Rev0"), 27 pages: PDF https://openairdocs.org/files/sha256/54/8d/548d27ada23f6107a65d399bd3a29c583a16f2832348cf4c9ba2cbd17db0868c; text https://openairdocs.org/service-documents/airbus-helicopters/ec120-25a031/file/548d27ada23f.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-2292, the docket of AD 2026-14-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC120-25A031
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec120-25a031

## Text (27 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-2292, the docket of AD 2026-14-02. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
Civil version(s): B
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
EQUIPMENT AND FURNISHINGS - Emergency Floatation Gear
New Emergency Floatation System (EFS) "FLOAT ARM"
push-button location
For the attention of
Revision No.  Date of issue
Revision 0  2023-10-25
Summary:
The purpose of this ALERT SERVICE BULLETIN is to move the Emergency Floatation System (EFS)
"FLOAT ARM" push-button from the Lighting and Ancillaries Control Unit (LACU) to allow the use of the EFS
function even if the event of a LACU failure. A route change is also required due to the change location.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR.
Revision 0 2023-10-25  Page 1/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
1-  PLANNING INFORMATION
CAUTION
THAT THE  MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE THE NECESSARY ADAPTATION
WORK.
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY WITH THE AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THIS ALERT SERVICE BULLETIN IT
INCLUDES  ONLY  THE  POST-DELIVERY
CONFIGURATION CHANGES WHICH ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters equipped with the Emergency Floatation System and with one of the following configurations:
CONFIGURATION 1
Helicopters with a serial number from 1399:
- Which have not installed the STYLENCE option
- Which have not complied with Service Bulletin No. 31-004.
CONFIGURATION 2
Helicopters with a serial number lower than 1399 and:
- Which have not installed the STYLENCE option
- Which have complied with Service Bulletin No. 31-004.
CONFIGURATION 3
Helicopters which have installed the STYLENCE option:
- With a serial number from 1399
Or
- With a serial number lower than 1399 and which have complied with Service Bulletin No. 31-004.
NOTE 1
You can identify the modification status of the helicopter in
the Individual Inspection Log Book.
For helicopters that complied with this ALERT SERVICE BULLETIN No. 25A031, the compliance with
ALERT SERVICE BULLETIN No. 05A023 (Inspection of the LACU) is not necessary.
Revision 0 2023-10-25  Page 2/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
1.A.2. Non-installed equipment or parts
Push-button reference 045004A111A or reference 304-2500-00.
1.B. ASSOCIATED REQUIREMENTS
A CAUTION
BEFORE THE NEXT FLIGHT, MAKE SURE THAT
THE FLIGHT MANUAL (FLM) IS AT THE LATEST
UPDATE APPROVED BY THE APPLICABLE
AUTHORITIES. REFER TO PARAGRAPH 3.D.
1.C. REASON
During a mission on the EC130B4, a malfunction of the LACU was observed which could also lead to the
loss of the EFS function.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to move the Emergency Floatation
System (EFS) "FLOAT ARM" push-button from the LACU to allow the use of the EFS function even if the
event of a LACU failure. A route change is also required due to the change location.
Revision 0 2023-10-25  Page 3/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
1.D. DESCRIPTION
The goal of this ALERT SERVICE BULLETIN is to:
- Remove the EFS "FLOAT ARM" push-button
Clean the printed circuit board of the LACU
Install the EFS "FLOAT ARM" push-button in new location in accordance with the configuration
Modify the electrical wiring.
PRE MOD  POST MOD - CONFIGURATIONS 1 and 2
- New location of
the EFS
"FLOAT ARM"
push-button
Old location of
the EFS  POST MOD - CONFIGURATION 3
"FLOAT ARM"
push-button
New location of
the EFS
"FLOAT ARM"
push-button
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The work must be performed on the helicopter by the operator.
Paragraphs  CONF 1  CONF 2  CONF 3
3.B.2.a.
3.B.2.0.1.
3.B.2.b.2.
3.B.2.b.3.
3.B.2.c.
Comply with paragraph 3.B. of this ALERT SERVICE BULLETIN not more than 36 months after you received
this ALERT SERVICE BULLETIN.
Revision 0 2023-10-25  Page 4/27
This document is available on the Internet: www.airb  ushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
Non-installed equipment or parts:
The operator makes the decision to do the modification to stock related to compliance with this
ALERT SERVICE BULLETIN. Refer to paragraph 3.B.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
For helicopters operated outside the terrain regulated by the EASA, the application of this document is
subject to validation provided by the responsible aviation authority of the state of registry.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have these
qualifications:
Qualifications:
1 Electrical Technician
1 Airframe Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated man-hours:
4 hours for the Electrical Technician
5 hours for the Airframe Technician.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is two days.
1.H. WEIGHT AND BALANCE
CONFIGURATION 1
Weight: + 0.2 kg
Moment:
- Longitudinal moment: + 0.33 m.kg
- Lateral moment: + 0.18 m.kg
After you complete the work, record the new weights and moments in your applicable document.
CONFIGURATION 2
Weight: + 0.3 kg
Moment:
- Longitudinal moment: + 0.50 m.kg
- Lateral moment: + 0.28 m.kg
After you complete the work, record the new weights and moments in your applicable document.
Revision 0 2023-10-25  Page 5/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
CONFIGURATION 3
Weight: + 0.1 kg
Moment:
- Longitudinal moment: + 0.16 m.kg
- Lateral moment: + 0.09 m.kg
After you complete the work, record the new weights and moments in your applicable document.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (AMM)
AMM: 20-10-00,3-4: Electrical Bonding - Airframe
AMM: 24-00-00,3-1: General Safety Instructions - Electrical Power Supply System
AMM: 25-67-00,5-1: Functional Tests - Emergency Floatation Gear
AMM: 31-42-00,5-1A: Adjustment and Functional Tests - LACU 911TS08 Y
AMM: 31-42-00,5-1B: Adjustment and Functional Tests - LACU 040101AB
AMM: 31-42-00,7-1: Cleaning - Printed circuit board
AMM: 31-42-00,8-2: Replacement - Push-Button
Standard Practices Manual (MTC)
MTC 20-02-04-402: Installation of rivets - retrofitting and repair - Riveting
MTC 20-02-07-401: Electrical bonding procedure - Electrical bonding
MTC 20-03-02-409: Installation of blind rivets ASN-NSA 1919 and 1921 - General rivet replacement
principles
MTC 20-04-01-402: Cleaning of removed individual parts with liquids solvents - Cleaning
MTC 20-04-04-401: Preparation of surfaces before painting - Surface treatment before painting
MTC 20-07-02-201: Helicopter parked in a repair shop - Safety instructions
MTC 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit power generating
system - Technical instructions
MTC 20-07-03-408: Appearance checks on an aircraft after inspection or repair - Technical instructions
MTC 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules
applicable to aircraft
MTC 20-80-20-402: Installation / Removal of Cable Ties - Standard Practices - Electrical Power
MTC 20-80-20-437: Operations on Indicator Lights - Standard Practices - Electrical Power
MTC 20-80-20-438: Checking the installation of indicator lights, switches, circuit breakers and potentiometers
MTC 20-80-20-449: Protection of electrical wiring during maintenance operations - Standard Practices -
Revision 0 2023-10-25  Page 6/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
Information Notice (IN)
IN 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN 3686-1-00: Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes
IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Promotion Notice (SPN)
SPN: 3703-P-00: Foreign Object Damage prevention
1.L.  OTHER AFFECTED PUBLICATIONS
CAUTION
TO  COMPLY  WITH  THIS
ALERT SERVICE BULLETIN, THE OPERATOR
MUST MAKE SURE THAT ALL THE MAINTENANCE
DOCUMENTS NECESSARY FOR  THE
MAINTENANCE OF THIS INSTALLATION ARE
AVAILABLE. IF THEY ARE NOT AVAILABLE, THE
OPERATOR  MUST  CONTACT
AIRBUS  HELICOPTERS TO GET  THESE
DOCUMENTS.
The manuals shown below are updated with the modification:
- Aircraft Maintenance Manual (AMM)
- Flight Manual (FLM)
- Illustrated Part Catalog (IPC)
System Description Section (SDS)
- Wiring Diagram Manual (WDM).
You will receive the documents to which you subscribe.
The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this
ALERT SERVICE BULLETIN will be incorporated in the next Normal Revision. Refer to DN.008.0023 until
the information is available in the published technical documentation.
NOTE 2
You can find more information about Delivery Notes in
Information Notice IN 3686-1-00.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
The PRE MOD and POST MOD components are not interchangeable.
Mixability:
You must not use the PRE MOD and POST MOD components together.
Revision 0 2023-10-25  Page 7/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
The Airbus Helicopters Program Department will do the tasks and/or supply the components free of charge.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
France
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
Components or kits  CONF 1  CONF 2  CONF 3
054603A
732-8045-01  _X
C120A080340099
C120A080340071  _ X
C120A080340171  _ X
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Components and kits to be ordered for one helicopter or one assembly:
ALL CONFIGURATIONS
Key Word  Qty New Reference  Item  Former  Instruction
Reference →
Obturator  054603A  1
Support  1  732-8045-01  8
Set of wires and labels  1  C120A080340099  11
Revision 0 2023-10-25  Page 8/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
ALL CONFIGURATIONS
Key Word  Qty  New Reference  Item  Reference → Instruction  Former
EFS "FLOAT ARM" push-button  C120A080340071
kit
(Float switch bracket) shim  C256A7911201  2  See NOTE
(Float switch) bracket  C256A7909201  See NOTE
(Blind) rivet  2  ASNA0078A503  4  See NOTE
(Blind) rivet  1  ASNA0078A502  5  See NOTE
(Float switch bracket) cover  1  C256A7910201  6  See NOTE
(Blind) rivet  NAS1398CW3A2  7  See NOTE
Clamp bracket  1  E0607-01  9  See NOTE
(Blind) rivet  ASNA0078A402  10
045004A111A
(Arm float electric) Ramp  1  C256A7908103  12  or  Discard
304-2500-00
Push-button  ref  For reference only  12a
Wire  ref  For reference only  12b
Clamp  1  E0043-5A0P  13  See NOTE
Contact  10  EN3155-008M2222  14
Module  1  EN4165A20-221NA  15
Contact  EN3155-015F2018  16
Contact  10  EN3155-003F2222  17
Module  1  EN4165A20-221NB  18
NOTE
Components items (2) to (7), (9) and (13) are not used in
this ALERT SERVICE BULLETIN for configuration 3.
CONFIGURATION 2
Former
Key Word  Qty  New Reference  Item  Instruction
Reference →
Stiffeners kit  C120A080340171
Rivet  32  ASNA0078A402  10
LH Stiffener  1  C531A2109201  19
RH Stiffener  1  C531A2110201  20
Reinforcement angle  C531A2111201  21
Rivet  10  ASNA0078A403  22
Rivet  2  ASNA0078A404  23
Rivet  2  ASNA0077A402  24
Revision 0  2023-10-25  Page 9/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
Consumables to be ordered separately:
Refer to Work Cards and Tasks indicated in this ALERT SERVICE BULLETIN.
Special tools:
Refer to Work Cards and Tasks indicated in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2023-10-25  Page 10/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Comply with the electrical bonding of the airframe. Refer to Task 20-10-00,3-4 (AMM).
Comply with the general safety instructions of electrical power supply system. Refer to
Task 24-00-00,3-1 (AMM).
Comply with the cleaning in working areas. Refer to Work Card 20-02-04-402 (MTC).
Comply with the electrical bonding procedure. Refer to Work Card 20-02-07-401 (MTC).
Comply with the installation of blind rivet. Refer to Work Card 20-03-02-409 (MTC).
Comply with the cleaning of removed individual parts with liquid solvents. Refer to
Work Card 20-04-01-402 (MTC).
Comply with the safety instructions of the helicopter parked in a repair shop. Refer to
Work Card 20-07-02-201 (MTC).
- Comply with the instructions when electrical power generating system. Refer to
Work Card 20-07-03-406 (MTC).
Comply with the checks on aircraft after inspection or repair. Refer to Work Card 20-07-03-408 (MTC).  Comply with the instructions about the installation / removal of cable ties. Refer to  0-20-402 (ACut the operations
Work Card 20-80-20-402 (MTC).
Comply with the instructions about the operations on indicator lights. Refer to
Work Card 20-80-20-437 (MTC).
Comply with the instructions about the installation of indicator lights, switches, circuit breakers and
potentiometers. Refer to Work Card 20-80-20-438 (MTC).
Comply with the instructions about the protection of electrical wiring during maintenance operations.
Refer to Work Card 20-80-20-449 (MTC).
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECTS DAMAGE (FOD), REFER TO
SAFETY  PROMOTION  NOTICE  (SPN)
No. 3703-P-00.
3.B.1. Preliminary steps
Park the helicopter in a maintenance hangar.
Disconnect all the electrical power supplies.
- Install the appropriate access equipment.
- Remove and/or open all the cowlings, panels, doors and all the equipment items to get access to the
different work areas.
3.B.2. Procedure
NOTE 1
Cutouts and drillings: Work Card 20-04-04-401 (MTC) gives
information on deburring and protection.
3.B.2.a. Removal of the EFS "FLOAT ARM" push-button - ALL CONFIGURATIONS (Figure 1)
- Remove the EFS "FLOAT ARM" push-button (a) from the control unit (b) (Detail A). Refer to
Task 31-42-00, 8-2 (AMM).
- Discard the EFS "FLOAT ARM" push-button (a).
Revision 0 2023-10-25  Page 11/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
- Clean the printed circuit board of the LACU. Refer to Task 31-42-00,7-1 (AMM).
- Install the obturator (1) on the control unit (b). Refer to Task 31-42-00, 8-2 (AMM).
- Make sure that all the push-buttons are correctly positioned.
3.B.2.b. Modification of the EFS "FLOAT ARM" push-button location
3.B.2.b.1. Modification of the push-button location under the instrument panel - CONFIGURATION 1
(Figure 2 and Figure 3)
On the console (d)
- Remove the rivets (c) (Figure 2, SECTION A-A).
- Put in position the shim (2) and the bracket (3).
- Counter-drill the holes (A) to match with the bracket (3) to a diameter of 2.6 mm (Figure 2, Detail C).
- Drill the hole (B) in accordance with the dimensions to a diameter of 3.3 mm.
- Drill the holes (C) in accordance with the dimensions to a diameter of 3.3 mm (Figure 3, Detail D).
NOTE 2
The length of 10 mm for the hole (C) is an advised length,
the minimum length adjusted with environment is 7 mm.
- Deburr the holes (A), (B) and (C) and clean the work area.
- Install the shim (2) with the rivets (5) (Figure 2, SECTION A-A).
- Install the bracket (3) with the rivets (4).
- Install the cover (6) on the bracket (3) with the rivets (7) (Detail B and SECTION B-B).
- Bond the label "20GR" from the set of wires and labels (11) inside the bracket (3) (not shown).
- Install the push-button (12a) of the ramp (12) on the bracket (3) (Figure 2, Detail B).
- Install the support (8) (Figure 3, Detail E) and the clamp bracket (9) (Detail F) with the rivets (10).
- Do the electrical bonding on the bonding areas.
3.B.2.b.2. Modification of the push-button location under the instrument panel - CONFIGURATION 2
(Figure 2, Figure 3 and Figure 7)
On the console (a)
- Remove the rivets (c) (Figure 2, SECTION A-A).
- Remove the rivets (e) (Figure 7, Detail A).
Only the LH side is given. Do the same procedure for the RH side with the RH stiffener (20).
- Do the cut-out (G) on the console (d) in accordance with the dimensions (Figure 7, SECTION B-B).
- Put in position the LH stiffener (19) to match with the console (d) (Detail A).
- Counter-drill the stiffener (19) to match the holes (F) and (J) of the console (d) to a diameter of
3.3 mm.
- Put in position the reinforcement angle (21) on the console (d) (SECTION A-A).
- Drill the holes (E) (SECTION A-A) and the holes (H) (Detail B) on the reinforcement angle (21) to a
diameter of 3.3 mm.
NOTE 3
It necessary, the rivet (g) can be replace by the rivet (24)
(Figure 7, Detail A).
Revision 0 2023-10-25  Page 12/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
- Deburr the holes (E), (F), (H) and (J) and clean the work area.
NOTE 4
The front rivet (23) is not installed on the RH stiffener (20). It
is installed in the same time of the bracket (3) (Figure 2).
- Do the electrical bonding of the holes of the rivets (10), (22) and (23).
- Install the LH stiffener (19) and the reinforcement angle (21) with the rivets (10), (22) and (23).
- Put in position the shim (2) and the bracket (3) (Figure 2, SECTION A-A).
- Counter-drill the holes (A) to match with the bracket (3) to a diameter of 2.6 mm (Figure 2, Detail C).
- Drill the hole (B) in accordance with the dimensions to a diameter of 3.3 mm.
- Drill the holes (C) in accordance with the dimensions to a diameter of 3.3 mm (Figure 3, Detail D).
NOTE S5
The length of 10 mm for the hole (C) is an advised length,
the minimum length adjusted with environment is 7 mm.
- Deburr the holes (A), (B) and (C) and clean the work area.
- Install the shim (2) with the rivets (5) (Figure 2, SECTION A-A).
- Install the bracket (3) with the rivets (4).
- Install the cover (6) on the bracket (3) with the rivets (7) (Detail B and SECTION B-B).
- Bond the label "20GR" from the set of wires and labels (11) inside the bracket (3) (not shown).
- Install the push-button (12a) of the ramp (12) on the bracket (3) (Figure 2, Detail B).
- Install the support (8) (Figure 3, Detail E) and the clamp bracket (9) (Detail F) with the rivets (10).
- Do the electrical bonding on the bonding areas.
3.B.2.b.3. Modification of the push-button location on the instrument panel - CONFIGURATION 3
(Figure 3 and Figure 6)
- Do the cut-out (D) and deburr in accordance with the dimensions (Figure 6, Detail B).
- Install the push-button (12a) of the ramp (12) on the instrument panel (f).
- Bond the label "20GR" from the set of wires and labels (11) as near as possible to the
push-button (12a) on the back of the instrument panel (t) (not shown).
- Drill the holes (C) in accordance with the dimensions to a diameter of 3.3 mm (Figure 3, Detail D).
- Deburr the holes (C) and clean the work area.
NOTE 6
The length of 10 mm for the hole (C) is an advised length,
the minimum length adjusted with environment is 7 mm.
- Install the support (8) (Figure 3, Detail E) and the clamp bracket (9) (Detail F) with the rivets (10).
- Do the electrical bonding on the bonding areas.
Revision 0 2023-10-25  Page 13/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
3.B.2.c. Modification of the electrical wiring (Figure 3, Figure 4 and Figure 5)
CONFIGURATIONS 1 AND 2
- Route the wire (12b) from the support (8) through the clamp bracket (9) with the clamps (13)
(Figure 3, Detail F).
CONFIGURATION 3
- Route the wire (12b) (not shown) from the back of the instrument panel to the support (8).
ALL CONFIGURATIONS
- Cut to the required length and connect the wire (12b) with (Figure 4 and Figure 5):
. The contacts (14)
. The module (15).
- Modify the electrical wiring with:
. The wires "2567-0109", "2567-0092", "2567-0093" and "2567-0090" from the set of wires and
labels (11)
. The contacts (16) and (17)
. The module (18).
- Do a continuity test on the installed wires.
3.B.3. Tests
- Set the helicopter to test condition.
- Connect all the electrical power supplies.
- Do a functional test of the LACU. Refer to Task 31-42-00,5-1A or 31-42-00,5-1B (AMM).
- Do a functional test of the EFS. Refer to Task 25-67-00, 5-1 (AMM), and do troubleshooting if necessary.
3.B.4. Final steps
- Clean and apply the close-up procedure to the work areas and the helicopter.
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (refer to paragraph 3.B.1.).
- Remove the access equipment.
- Set the helicopter to flight condition.
Revision 0 2023-10-25  Page 14/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 15 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
3.C. RECORD OF COMPLIANCE
Compliance with this document:
Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
NOTE 7
The  recording  of  compliance  with
ALERT SERVICE BULLETIN in the SB Insight tool does not
replace the recording in the helicopter documents.
SB EC120-25A031
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
CAUTION
BEFORE THE NEXT FLIGHT, MAKE SURE THAT
YOUR FLIGHT MANUAL (FLM) IS AT THE LATEST
UPDATE APPROVED BY THE APPLICABLE
AUTHORITIES.
Refer to Flight Manual (FLM).
Maintenance instructions:
Refer to the applicable technical publication.
Revision 0 2023-10-25  Page 15/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 16 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
ALL CONFIGURATIONS
OFF
DAY
'NIGHT  CRANK  ACCU TST
NGV
BAT EPU  GENE  FUEL P  PITOT
VIA SELECT  A/COLTL  POS LT
SLING  WIPER  FAN  STBY HOR
a
FIRE TST  100ft MUTE
Back to paragraph 3.B.2.a.
Figure 1
Revision 0 2023-10-25  Page 16/27
This document is available on the Internet: www.  licopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 17 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
CONFIGURATIONS 1 AND 2
F see FIGURE 3
SECTION
A-A
NOTES
a-g
172
Back to paragraphs 3.B.2.b.1. and 3.B.2.b.2.
Figure 2
Revision 0 2023-10-25
This document is available on the Internet: www.airbushelicopters.com/techoub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 18 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
PAGE INTENTIONALLY LEFT IN BLANK
Revision 0 2023-10-25  Page 18/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 19 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
ALL CONFIGURATIONS
. d
Z-2600 1
× 1330
10
Z -2600
CONFIGURATIONS 1 AND 2
12b  13  9
10
YO
Back to paragraphs 3.B.2.b.1., 3.B.2.b.2., 3.B.2.b.3. and 3.B.2.c.
Figure 3
Revision 0 2023-10-25  Page 19/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 20 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
PAGE INTENTIONALLY LEFT IN BLANK
Revision 0 2023-10-25  Page 20/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 21 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
ALL CONFIGURATIONS
PRE MOD
11GR
220VC  101VG 101VT  20GR  11VU  12GR
14GR
15GR
X 1330  · 1717
Back to paragraph 3.B.2.c.
Figure 4
Revision 0 2023-10-25  Page 21/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 22 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
PAGE INTENTIONALLY LEFT IN BLANK
Revision 0 2023-10-25  Page 22/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 23 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
ALL CONFIGURATIONS
POST MOD
15  18
120
4GR 103
109
TEST
11011
16
92
28V
16
80  93
28V DIM
80212b  94
82
96
87  101VG
83
84
85
86
FLOAT CTL
12
NOTE: UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRES
IDENTIFICATION WITH ATA 2567
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DR24
Back to paragraph 3.B.2.c.
Figure 5
Revision 0 2023-10-25  Page 23/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 24 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
PAGE INTENTIONALLY LEFT IN BLANK
Revision 0 2023-10-25  Page 24/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 25 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
CONFIGURATION 3
NON REPRESENTATIVE INSTRUMENT PANEL
ЦА
ELT
R1 TYPE  D¢)
Back to paragraph 3.B.2.b.3.
Figure 6
Revision 0 2023-10-25  Page 25/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 26 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
PAGE INTENTIONALLY LEFT IN BLANK
Revision 0 2023-10-25  Page 26/27
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 27 (OCR)

AIRBUS  HELICOPTERS
No. EC120-25A031
CONFIGURATION 2
LH SIDE SHOWN  SECTION
RH SIDE SYMMETRICAL  A-A
10
÷
19 LH
20 RH
NOTES  NON COMPLETE VIEW
B-B
Back to paragraph 3.B.2.b.2.
Figure 7
Revision 0 2023-10-25  Page 27/27
This document is available on the Internet: www.airb  opters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
