# Airbus Helicopters Emergency Alert Service Bulletin EC130-05A042

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("Airbus Helicopters EASB No. EC130-05A042 Rev 1"), 12 pages: PDF https://openairdocs.org/files/sha256/ed/97/ed97ed7af633bb53332f914b99fe33a248f29eea9aa440695e671a046ad8db6c; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-05a042/file/ed97ed7af633.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-2396, the docket of AD 2023-25-14. Not covered by OpenAirDocs’ CC0 dedication.
- Airbus Helicopters EASB EC130-05A042 Rev 0 ("Airbus Helicopters EASB EC130-05A042 Rev 0"), 8 pages: PDF https://openairdocs.org/files/sha256/02/73/0273ea225f052186eabe8a84dce512acd05f430c922643ed7f40052c0c6a2c74; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-05a042/file/0273ea225f05.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-1664, the docket of AD 2022-27-09. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: EC130-05A042
- Latest revision known: EC130-05A042, Revision 1, dated November 2, 2023 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec130-05a042

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-25-14](https://openairdocs.org/ad/2023-25-14.md), effective Jan 12, 2024: Revision 1
- [AD 2022-27-09](https://openairdocs.org/ad/2022-27-09.md), effective Jan 30, 2023: No revision named

## Text (12 pages)

Revision 1, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-2396, the docket of AD 2023-25-14. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TAIL ROTOR DRIVE - Tail rotor drive shaft
Balancing check of the tail rotor drive line
ATA: 65
For the attention of
AIRCRAFT  NUMBER  Version(s)
CONCERNED  Civil  Military
EC130  05A042  T2
Revision No.  Date of issue
Revision 0  2022-12-14
Revision 1  2023-11-02
Summary:
The purpose of this ALERT SERVICE BULLETIN is to check vibration level of the tail rotor drive shaft to make sure
that it is within the defined limit.
Reason for last Revision:
The purpose of revision 1 is to:
- Make it clearer that it is not permitted to comply with balance correction after balance measurement.
- Tell the operator to do a ground run for a minimum of ten minutes before measuring the vibration levels.
- Decrease the maximum vibration level permitted when you comply with Task 65-11-01,5-1B (AMM).
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR.
Revision 0 2022-12-14  Page 1/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
EC130 versionT2 helicopters that have a supercritical rear drive system with
rotor drive shaft MP/N 350A34-5010-00 and 350A34-5020-00.
NOTE 1
Supercritical rear drive system comes with modification 079809.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
A crack was found on the tailboom of an EC130 T2 during the application of
ALERT SERVICE BULLETIN No. 05A039 (Visual inspection of the rear transmission bearing support).
During the previous flight, the pilot reported a humming sound and vibrations in the pedals.
During troubleshooting, a measurement of vibration levels of the tail rotor drive shaft was done and an
abnormal increase was found.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to check vibration level of the tail rotor
drive shaft to make sure that it is within the defined limit.
Revision 1:
Following review of feedbacks received since publication of revision 0 of this ALERT SERVICE BULLETIN,
Airbus Helicopters noticed the differences between Task 65-11-01,5-1A (AMM) (with the STEADY Control
tuning equipment) and Task 65-11-01,5-1B (AMM) (with the VIBREX 2000 adjustment equipment) vibration
measurement results:
- After analysis it appeared that the differences of installations between the two Tasks of the
Aircraft Maintenance Manual (AMM) lead to different readings for an identical unbalance load on the tail
drive shaft support.
- The vibration load measures can vary during the first minutes of a ground run and stabilize after 10min.
Also, Airbus helicopters wants to highlight that correction of the tail drive line balancing other than after the
replacement of tail rotor drive line parts can interfere with the correct measurement of vibration loads and
lead to unexpected damage on the tailboom airframe and tail rotor drive line.
Consequently, the purpose of revision 1 is to:
- Make it clearer that it is not permitted to comply with balance correction after balance measurement.
- Tell the operator to do a ground run for a minimum of ten minutes before measuring the vibration levels.
- Decrease the maximum vibration level permitted when you comply with Task 65-11-01,5-1B (AMM).
Revision 1 of this ALERT SERVICE BULLETIN has an effect on the compliance with revision 0 of this
ALERT SERVICE BULLETIN.
Revision 0 2022-12-14  Page 2/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- Measure the vibration level on the tail rotor drive shaft.
- Analyze the results.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
1.E.2.a. For all helicopters upon receipt of revision 1 of this ALERT SERVICE BULLETIN:
It is not permitted to do balance correction of Task 65-11-01,5-1A (AMM) and Task 65-11-01,5-1B (AMM)
other than during compliance with paragraph 3.B.2.b. (Replacement of sliding flange and the splined sleeve
equipped).
For helicopters which have done balance correction other than during compliance with
paragraph 3.B.2.b. contact Airbus Helicopters to the address that follow to get instructions before resuming
flight:
https://airbusworld.helicopters.airbus.com
Revision 0 2022-12-14  Page 3/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
1.E.2.b. If this ALERT SERVICE BULLETIN has never been complied with, then comply with Table No.1:
Table No. 1
Compliance time  Task used for  Interpretation of  Action 1  Recurring check
check  the results
Then, comply with
If vibration level  is less than 1.4  IPS  Comply with paragraph  3.В.3.  paragraph 1.E.2. at  the latest when you  reach 50 FH since
the last check
If vibration level  Comply with paragraphs
Vibration level  is more than or  3.B.2.b. and 3.B.3. no
check  equal to 1.4 and  later than 30 FH since the
complied with  less than 1.8 IPS  last check.
For helicopters which  are 50 FH or more,  since new:  65-11-01,5-1A  (AMM).  Task  less than 2.6 IPS  equal to 1.8 and  If vibration level  is more than or  later than 15 FH since the  Comply with paragraphs  3.B.2.b. and 3.B.3. no  last check.  the latest when you  paragraph 1.E.2. at  reach 50 FH since  Then, comply with  the parts
Comply with  replacement
paragraphs 3.B.1. and  If vibration level  Comply with paragraphs
3.B.2.a. before you  is more than or  3.B.2.b. and 3.B.3. before
resume flights.  equal to 2.6 IPS  you resume flights
Then, comply with
If vibration level  is less than 0.7  Comply with paragraph  the latest when you  paragraph 1.E.2. at
For helicopters which  IPS  З.В.З.  reach 50 FH since
are less than 50 FH  the last check
since new:  If vibration level  Comply with paragraphs
Comply with  is more than or  3.B.2. b. and 3.B.3. no
reach 50 FH since new.  paragraphs 3.B.1. and  3.B.2.a. before you  Vibration level  check  less than 0.9 IPS  If vibration level  equal to 0.7 and  later than 30 FH since the  Comply with paragraphs  last check.
65-11-01,5-1B  complied with  (AMM).  Task  less than 1.3 IPS  is more than or  equal to 0.9 and  later than 15 FH since the  3.B.2. b. and 3.B.3. no  last check.  the latest when you  paragraph 1.E.2. at  reach 50 FH since  Then, comply with
the parts
If vibration level  Comply with paragraphs  replacement
is more than or  3.B.2. b. and 3.B.3. before
equal to 1.3 IPS  you resume flights
Revision 0  2022-12-14  Page 4/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
1.E.2.c. If you already complied with revision 0 of this ALERT SERVICE BULLETIN with
Task 65-11-01,5-1B (AMM) and Vibration level was more than or equal to 0.7 IPS, comply with
Table No. 2:
Table No. 2
Compliance time  Interpretation of the  results  Last check  Action 1  Recurring check
Less than 30  Comply with paragraphs
Flight Hours  3.B.1., 3.B.2. b. and 3.B.3.
(FH) since last  no later than 30 FH since
check  the last check.
If vibration level was
more than or equal
to 0.7 and less than
0.9 IPS at last check  More than 30  Comply with paragraphs
FH since last  3.B. 1, 3.B.2. b. and 3.B.3.
check  before you resume flights.
When you receive  Comply with paragraphs  Then, comply with
revision 1 of this  Less than 15 FH  3.B.1., 3.B.2. b. and 3.B.3.  paragraph 1.E.2. at
ALERT SERVICE  since last check  no later than 15 FH since  the latest when you
BULLETIN (refer  the last check.  reach 50 FH since
to the issue date  If vibration level was  the parts
on the page  more than or equal  replacement
footer),  to 0.9 and less than
1.3 IPS at last check  More than 15  Comply with paragraphs
FH since last  3.B.1., 3.B.2. b. and 3.B.3.
check  before you resume flights.
If vibration level was  Comply with paragraphs
more than or equal  Not applicable  3.B.1., 3.B.2.b. and 3.B.3.
to 1.3 at last check  before you resume flights.
Revision 0  2022-12-14  Page 5/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
1.E.2.d. If you already complied with this ALERT SERVICE BULLETIN and you are not concerned by paragraph
1.E.2.b and paragraph 1.E.2.c. comply with Table No. 3:
Table No. 3
Compliance time  Task used for  check  Interpretation of the  results  Action 1  Recurring check
Then, comply with
paragraph 1.E.2
If vibration level is  Comply with  at the latest when
less than 1.4 IPS  paragraph 3.B.3.  you reach 50 FH
since the last
check.
If vibration level is  Comply with
more than or equal to  paragraphs 3.B.2.b.
Vibration level  1.4 and less than 1.8  and 3.B.3. no later
check complied  than 30 FH since the
IPS
Task 65-11-01,5-1A  with  If vibration level is  Comply with  last check.  Then, comply with  paragraph 1.E.2
(AMM).  more than or equal to  paragraphs 3.B.2.b.  at the latest when
1.8 and less than 2.6  IPS  than 15 FH since the  and 3.B.3. no later  you reach 50 FH  since the parts
last check.  replacement
If vibration level is  Comply with
more than or equal to  paragraphs 3.B.2.b.
Comply with  2.6 IPS  and 3.B.3. before
paragraphs 3.B.1.  you resume flights
and 3.B.2.a. when
you reach 50 FH  Then, comply with
since the last check.  If vibration level is  Comply with  at the latest when  paragraph 1.E.2.
less than 0.7 IPS  paragraph 3.B.3.  you reach 50 FH
since the last
check.
If vibration level is  Comply with
Vibration level  more than or equal to  0.7 and less than 0.9  paragraphs 3.B.2.b.  and 3.B.3. no later
check complied  than 30 FH since the
IPS
with  last check
Task 65-11-01,5-1B  (AMM).  more than or equal to  If vibration level is  paragraphs 3.B.2.b.  Comply with  Then, comply with  at the latest when  paragraph 1.E.2.
0.9 and less than 1.3  than 15 FH since the  and 3.B.3. no later  you reach 50 FH
IPS  since the parts
last check.
replacement
If vibration level is  Comply with
more than or equal to  paragraphs 3.B.2.b.
1.3 IPS  you resume flights  and 3.B.3. before
Revision 0  2022-12-14  Page 6/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
NOTE 2
If necessary, for the initial check, a single ferry flight without
passengers is allowed to a maintenance location, where the
actions required by this ALERT SERVICE BULLETIN can be
accomplished.
NOTE 3
The difference between Task 65-11-01,5-1A (AMM) and
65-11-01,5-1B (AMM) is the equipment used to do the
vibration measurement.
Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical Technician.
1 Pilot.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated man-hours: 4 hours for the Mechanical Technician.
10 minutes for the pilot.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is 4 hours (except time to replace the sliding flange and the splined
sleeve equipped).
1.H. WEIGHT AND BALANCE
There is no change in weight and moment.
1.I. POWER CONSUMPTION
Not changed.
Revision 0  2022-12-14  Page 7/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (AMM):
AMM: 65-11-01,4-1: Removal - Front section - Tail rotor drive line POST MOD 079809
AMM: 65-11-01,4-2: Installation - Front section - Tail rotor drive line POST MOD 079809
AMM: 65-11-01,4-3: Removal - Rear section - Tail rotor drive line POST MOD 079809
AMM: 65-11-01,4-4: Installation - Rear section - Tail rotor drive line POST MOD 079809
AMM: 65-11-01,4-5: Disassembly / Assembly - Rear section - Tail rotor drive line POST MOD 079809
AMM: 65-11-01,5-1A: Adjustment - Balancing of the tail rotor drive line (with the STEADY Control tuning
equipment) - Tail Drive Line POST MOD 079809
AMM: 65-11-01,5-1B: Adjustment - Balancing of the tail rotor drive shaft (with the VIBREX 2000 adjustment
equipment) - Tail Drive Line POST MOD 079809
Standard Practices Manual (MTC):
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2022-12-14  Page 8/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead time.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction des Ventes et Relation Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2022-12-14  Page 9/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or parts to be ordered separately:
Key  Qty  New reference  Item  Former
word  reference  →  Instruction
Sliding flange  1  350A34-5035-20  1  350A34-5035-20  Replace if
necessary
Splined sleeve  350A34-5025-00  2  350A34-5025-00  Replace if
equipped  necessary
Consumables to be ordered separately:
Refer to the Work Cards and Tasks given in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards and Tasks given in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2022-12-14  Page 10/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Non applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies refer to the Work Card 20-07-03-406 (MTC).
- Install the access equipment.
3.B.2. Procedure
3.B.2.a. Check of the vibration level
CAUTION
COMPLIANCE WITH MEASUREMENT
PARAGRAPH OF TASK 65-11-01,5-1A (AMM) OR
65-11-01,5-1B (AMM), RECORD THE VIBRATION
LEVEL AND DO NOT APPLY CORRECTION IN
ACCORDANCE WITH PARAGRAPH 1.E.2.a.
- Measure the vibration level on the tail rotor drive shaft. Refer to Task 65-11-01,5-1A (AMM) or
65-11-01,5-1B (AMM).Do the ground run with the main rotor at nominal rating with NR at 374 rpm for 10
minutes before measuring the vibration level.
- Make a Technical Event (TE) in the Technical Request Management tool accessible through AirbusWorld
Portal: https://airbusworld.helicopters.airbus.com
- Select the Technical Event (TE) business domain: "SB/ASB Feedback".
- Select the Technical Event (TE) request type: "EC130-05A042".
- Write in the Technical Event (TE) topic the key words that follow: "EASB 05A042".
- Send the vibration level, the phase (hour) and FH before compliance with this
ALERT SERVICE BULLETIN to Airbus Helicopters.
- Interpret the results as per paragraph 1.E.2.
3.B.2.b. Replacement of the sliding flange and the splined sleeve equipped
- Remove the front section of the tail rotor drive. Refer to Task 65-11-01,4-1 (AMM).
- Remove the rear section of the tail rotor drive. Refer to Task 65-11-01,4-3 (AMM).
- Remove the splined sleeve equipped (b) (not shown) from the rear section. Refer to
Task 65-11-01,4-5 (AMM).
- Install a new splined sleeve equipped (2) (not shown) on the rear section. Refer to
Task 65-11-01,4-5 (AMM).
- Install the rear section of the tail rotor drive. Refer to Task 65-11-01,4-4 (AMM).
- Remove the sliding flange (a) (not shown) from the front section. Refer to Task 65-11-01,4-1 (AMM).
- Install a new sliding flange (1) (not shown) on the front section. Refer to Task 65-11-01,4-2 (AMM).
- Install the front section of the tail rotor drive. Refer to Task 65-11-01,4-2 (AMM).
Revision 0  2022-12-14  Page 11/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
3.B.3. Final steps
- Do an aspect check on the helicopter after inspection or repair, refer to the
Work Card 20-07-03-408 (MTC).
- Connect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR-Code or hypertext link
NOTE
recording  compliance  with
ALERT  SERVICE  BULLETINS  in
SB Insight tool does not replace the recording in the
helicopter documents.
EASB EC130-05A042
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2022-12-14  Page 12/12
Revision 1 2023-11-02  This document is available on the internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
