# Eurocopter Alert Service Bulletin EC130-25A158

Copy: No revision named ("C-ASB EC130-25A158 Rev0"), 47 pages: PDF https://openairdocs.org/files/sha256/2e/4c/2e4cec0cf00518706403048f3201494b2d0f53908442d893b3a48261bf3da890; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-25a158/file/2e4cec0cf005.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-2292, the docket of AD 2026-14-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC130-25A158
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec130-25a158

## Text (47 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-2292, the docket of AD 2026-14-02. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
Civil version(s): B4
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
EQUIPMENT AND FURNISHINGS - Emergency Floatation Gear
Movement of the emergency floatation gear button
from the SMS Block to the instrument panel
Related to modification 0720175
For the attention of
Revision No.  Date of issue
Revision 0  2023-10-25
Summary:
The objective of this ALERT SERVICE BULLETIN is to move the position of the FLOAT ARM pushbutton outside
the SMS Block. This prevents a short-circuit on the control panel of the SMS Block.
Compliance:
For Airbus Helicopters it is mandatory to comply with the instructions contained in this ALERT SERVICE
BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR
Revision 0 2023-10-25  Page 1/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
1-  PLANNING INFORMATION
CAUTION
MAKE  SURE THAT  THE MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE THE NECESSARY ADAPTATION
WORK.
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY  WITH  THE  AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THE INDIVIDUAL INSPECTION LOG
BOOK. IT INCLUDES ONLY THE POST-DELIVERY
CONFIGURATION CHANGES THAT ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters that have:
- The emergency floatation gear
- The SMS Block:
. MP/N 024803AA (P/N 704A46580112)
. or MP/N 024803B or MP/N 024803B-A (P/N 704A46580119)
. or MP/N 074801A or MP/N 074801AA (P/N 704A46580124)
. or MP/N 304-2612-00 (P/N 704A46580139).
NOTE 1
All the MP/N of SMS block listed are POST MOD 073537.
For helicopters that complied with this ALERT SERVICE
BULLETIN, compliance with ALERT SERVICE BULLETIN
No. 05A036 (Inspection of the control panel) is not
necessary.
Revision 0 2023-10-25  Page 2/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
All configurations
PRE MOD
SMS BLOCK
button
Configuration 1
Helicopters that have the emergency floatation gear with relays 10G/11G under cabin floor.
Z -2570
10G
04:
Configuration 2
Helicopters that have the emergency floatation gear without relays 10G/11G under cabin floor.
Revision 0 2023-10-25  Page 3/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
Configuration 3
Helicopters that have:
- Emergency floatation gear with relays 10G/11G on the relays and terminals strip bracket, under the
cabin floor
- The electric mirrors
- The horizon battery.
Y-673,5
Z-2570  10G  11G
Configuration 4
Helicopters that have:
- Emergency floatation gear without relays 10G/11G on the relays and terminals strip bracket, under the
cabin floor
- The electric mirrors
- The horizon battery.
1.A.2. Non-installed equipment or parts
Button, push MP/N 024904A-A or 045004A131A.
1.B. ASSOCIATED REQUIREMENTS
CAUTION
BEFORE YOU START THE WORK, MAKE SURE
THAT THE FLIGHT MANUAL (FLM) IS AT THE
LATEST UPDATE. MAKE SURE THAT THIS FLIGHT
MANUAL (FLM) IS APPROVED BY THE
APPLICABLE AUTHORITIES OR THROUGH A
DELIVERY NOTE.
REFER TO PARAGRAPH 3.D.
Revision 0 2023-10-25  Page 4/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
1.C. REASON
During a mission on EC130 B4, a strong smell of burning was detected in the cabin with various lights
coming on and going off on the Société de Marquage et de Signalisation (SMS) block pushbuttons and the
Caution and Warning Panel lights (CWPL) with their associated audio alarm.
The pilot returned to the base without any further consequences for the mission.
After investigation, the most likely scenario could be dust or FOD on the contacts of the pushbuttons leads
to deteriorate the LACU printed circuit board.
The deterioration of the control panel can lead to the armament loss of the emergency floatation gear.
Consequently, the objective of this ALERT SERVICE BULLETIN is to move the position of the FLOAT ARM
pushbutton from the SMS Block to the instrument panel, to prevent the loss of the emergency floatation gear
if there is a SMS Block failure.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- Removal of the FLOAT ARM pushbutton
- Cleaning of the printed circuit board of the control unit
- Modification of the structure
- Installation the FLOAT ARM pushbutton in the new location
- Adaptation of the routing
- Modification of the electrical wiring including installing relays when necessary.
- Performing tests.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
It is the operator who does the work on the helicopter.
Helicopters/installed equipment or parts:
Comply with paragraph 3.B. not more than 36 months after you received this ALERT SERVICE BULLETIN.
Refer to the issue date on the page footer.
Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
For helicopters operated outside the terrain regulated by the EASA, the application of this document is
subject to validation provided by the responsible aviation authority of the state of registry.
Revision 0 2023-10-25  Page 5/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical Technician
1 Electrical Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: 3 hours for the Mechanical Technician (CONF 1, CONF 3, CONF 4)
4 hours for the Mechanical Technician (CONF 2)
2 days for the Electrical Technician (ALL CONFS).
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is three days.
1.H. WEIGHT AND BALANCE
CONF 1 and 3
Weight: + 0.491 kg.
Moment: Longitudinal + 0.396 m.kg.
Moment: Lateral - 0.235 m.kg.
CONF 2 and 4
Weight: + 0.541 kg.
Moment: Longitudinal + 0.443 m.kg.
Moment: Lateral - 2.260 m.kg.
After you complete the work, record the new weights and moments in your applicable document.
1.I. POWER CONSUMPTION
Not changed.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0 2023-10-25  Page 6/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (AMM):
AMM: 24-00-00, 3-1: General Instructions - Electrical Systems - Electrical Power Supply System
AMM: 24-00-00, 6-1: Check - Electrical Power Supply System - Electrical Power Supply System
AMM: 25-67-00, 5-1: Functional Tests - Emergency Floatation Gear Control Circuit - Emergency Floatation
System
AMM: 25-67-00, 5-2: Functional Tests - Emergency Floatation Gear Diaphragms - Emergency Floatation
System
AMM: 31-42-00, 7-1: Cleaning - Printed circuit board - Control Unit
AMM: 31-42-00, 8-1B: Replacement - Push button or Bulb (POST MOD 07 3537) - Control Unit
AMM: 53-51-00, 4-2: Removal / Installation - Lower Cowlings - Cowlings
AMM: 60-00-00, 3-1: General Instructions - Mechanical assemblies - General - Mechanical Systems
Standard Practices Manual (MTC):
MTC: 20-02-01-602: Cables insulation / continuity test procedure - General
MTC: 20-02-04-402: Installation of rivets - retrofitting and repair - Riveting
MTC: 20-02-04-601: General riveting acceptance requirements - Riveting
MTC: 20-02-05-401: Joining by riveting - Joining
MTC: 20-02-05-404:  Assembly by screws and nuts - Joining
MTC: 20-02-07-101:  Electrical bonding: General
MTC: 20-02-07-401:  Electrical bonding procedure
MTC: 20-03-01-102:  General repair instructions Unriveting principle - General repair instructions
MTC: 20-04-04-401:  Preparation of surfaces before painting - Surface treatment before painting
MTC: 20-04-04-403:  Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment
before painting
MTC: 20-04-05-101:  Painting equipments and paint touch-ups - General - Paint and primer application
procedure
MTC: 20-04-05-601:  Checks before and after paint application - Paint and primer application procedure
MTC: 20-07-02-201:  Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-406:  Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408:  Appearance checks on an aircraft after inspection or repair - Technical instructions
MTC: 20-80-20-402:  Installation / Removal of Cable Ties - Standard Practices - Electrical Power
MTC: 20-80-20-438:  Checking the installation of indicator lights, switches, circuit breakers and
potentiometers - Standard Practices - Electrical Power
MTC: 20-80-20-449:  Protection of electrical wiring during maintenance operations - Standard Practices -
Electrical Power
Information Notice (IN):
IN 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN 3686-1-00: Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes
IN 3785-I-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Promotion Notice (SPN):
SPN 3703-P-00: Foreign Object Damage prevention
Revision 0 2023-10-25  Page 7/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
1.L. OTHER AFFECTED PUBLICATIONS
The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this ALERT
SERVICE BULLETIN will be incorporated in the next Normal Revision.
Refer to DN.008.0024 until the information is available in the published technical documentation.
NOTE 2
You can find more information about Delivery Notes in
Information Notice IN 3686-1-00.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
The PRE MOD and POST MOD components are not interchangeable.
Mixability:
This ALERT SERVICE BULLETIN has no effect on the mixability.
Revision 0 2023-10-25  Page 8/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
The Airbus Helicopters Program Department (Light helicopters department) will supply the components free
of charge.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2023-10-25  Page 9/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Configurations 1 and 3
Key Word  Qty  New  Item  Former
Reference  Reference →  Instruction
FLOTTA SMS BLOCK  350A08-6781-0071
WITH RELAY
LED pushbutton  ECS0763F2027N  2  024904A-A or  Discard
045004A131A
Interface seal  1  ECS0780-S  7
Binding clamp  50  E0043-1COP  8
Spacer  50  E0688-00  9
Set of wires  1  350A08-6791-0099  12
Connector  1  ECS0780-01  16
Contact  16  EN3155003F2222  17
Extension  2  ECS0739G20-20  18
Contact  18  EN3155-016M2018  19
Electrical connector  1  EN4165A20-221AB  20
Module  ECS0815-A  21
Module  EN4165A20-221AA  22
Contact  7  EN3155-008M2222  23
Blue cable connection  2  E0541-11  25
Module diode  E0566-20-01  26
Socket contact  2  M39029/101-553  27
Contact  2  EN3155-015F2020  28
Revision 0 2023-10-25  Page 10/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
Kits to be ordered for one helicopter or one assembly (cont.):
Configurations 2 and 4
New  Former
Key Word  Qty  Reference  Item  Reference →  Instruction
FLOTTA SMS BLOCK  350A08-6781-0171
WITHOUT RELAY
LED pushbutton  1  ECS0763F2027N  2
Interface seal  1  ECS0780-S  7
Binding clamp  50  E0043-1COP  8
Spacer  50  E0688-00  9
Set of wires  1  350A08-6792-0099  13
Relay  2  M83536/2-024M  14
Relay socket  2  M12883/45-01  15
Connector  ECS0780-01  16
Contact  16  EN3155003F2222  17
Extension  5  ECS0739G20-20  18
Contact  24  EN3155-016M2018  19
Electrical connector  1  EN4165A20-221AB  20
Module  ECS0815-A  21
Module  EN4165A20-221AA  22
Contact  EN3155-008M2222  23
Module diode  1  E0566-20-01  26
Socket contact  8  M39029/101-553  27
Contact  2  EN3155-015F2020  28
Equipment or parts to be ordered separately:
Configurations 1 and 3
New  Former
Key Word  Qty  Reference  Item  Reference →  Instruction
Obturator  1  054603A  1
Sleeve  1  35860-102
Set of labels  1  350A08-6781-0099  4
Tubular braided  19 m  EN6049-003-04-5  24
expanda
Tubular braided  4 m  EN6049-003-06-5  29
expanda
Revision 0  2023-10-25  Page 11/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
Equipment or parts to be ordered separately (cont.):
Configurations 2 and 4
New  Former
Key Word  Qty  Item
Reference  Reference →  Instruction
Obturator  1  054603A  1
Sleeve  1  35860-102
Set of labels  1  350A08-6781-0199  5
Relay support  1  355A65-7982-20  10
Blind rivet  2  ASNA0078A502  11
Tubular braided  20 m  EN6049-003-04-5  24
expanda
Tubular braided  4 m  EN6049-003-06-5  29
expanda
Consumables to be ordered separately:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN and the list below:
Key Word  Qty  Reference  Item
Touch-up pen  0.2 L  ECS2338.10  CM 316  6
ALODINE 1200
You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering
(IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2023-10-25  Page 12/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Comply with the general electrical instructions. Refer to Task 24-00-00, 3-1 (AMM).
- Comply with the general instructions for checks of the electrical generation system. Refer to
Task 24-00-00, 6-1 (AMM).
- Comply with the general instructions about the mechanical assemblies. Refer to Task 60-00-00, 3-1 (AMM).
- Comply with the general instructions about the cable insulation / continuity test procedure. Refer to
Work Card 20-02-01-602 (MTC).
- Comply with the general instructions for electrical bonding. Refer to Work Card 20-02-07-101 (MTC).
- Comply with the general instructions for bonding procedure. Refer to Work Card 20-02-07-401 (MTC).
- Comply with the general instructions for installation of rivets for retrofitting and repair. Refer to
Work Card 20-02-04-402 (MTC).
- Comply with the general instructions for riveting acceptance requirements. Refer to
Work Card 20-02-04-601 (MTC).
- Comply with the general instructions for joining by riveting. Refer to Work Card 20-02-05-401 (MTC).
- Comply with the general instructions for unriveting principle. Refer to Work Card 20-03-01-102 (MTC).
- Comply with the general instructions for the preparation of surfaces before painting. Refer to
Work Card 20-04-04-401 (MTC).
- Comply with the general instructions for the touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200).
Refer to 20-04-04-403 (MTC).
- Comply with the general instructions about the painting means and paint touch-ups. Refer to
Work Card 20-04-05-101 (MTC).
- Comply with the general instructions about the painting checks before and after application. Refer to
Work Card 20-04-05-601 (MTC).
- Comply with the technical instructions applicable when you do work on an aircraft electrical circuit and
power generating systems. Refer to Work Card 20-07-03-406 (MTC).
- Comply with the instructions about the installation / removal of cable ties. Refer to
Work Card 20-80-20-402 (MTC).
- Comply with the instructions about the installation of indicator lights, switches, circuit breakers and
potentiometers. Refer to Work Card 20-80-20-438 (MTC).
- Comply with the instructions about the protection of electrical wiring during maintenance operations. Refer
to Work Card 20-80-20-449 (MTC).
Unless specified differently, apply the standard tightening torque values. Refer to Work Card 20-02-05-404
(MTC).
3.B. WORK STEPS
• CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECT DAMAGE (FOD). REFER TO
SPN 3703-P-00.
3.B.1. Preliminary steps
- Park the helicopter in a hangar. Refer to Work Card 20-07-02-201 (MTC).
- Install the applicable access equipment.
- Disconnect all the electrical power supplies.
- Remove the lower cowlings. Refer to Task 53-51-00, 4-2 (AMM).
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas.
Revision 0 2023-10-25  Page 13/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3.B.2. Procedure
NOTE 1
Cuts and drilling: Work Card 20-04-04-401 (MTC) gives
information on deburring and protection.
3.B.2.a. Removal of the FLOAT ARM pushbutton (Figure 1, Figure 4, Figure 8)
ALL Configurations
- Disconnect the panel "30 ALPHA" from the floatation box "1G" (Figure 4 for CONFs 1 and 3 or
Figure 8 for CONFs 2 and 4).
- Remove and discard the FLOAT ARM pushbutton (a) from the panel "30 ALPHA" (Figure 1). Refer to
Task 31-42-00, 8-1B (AMM).
- Clean the printed circuit board of the control unit. Refer to Task 31-42-00, 7-1 (AMM).
- Install the obturator (1).
3.B.2.b. Modification of the structure (Figure 2, Figure 13)
ALL Configurations
- Identify the cutout (A) in the instrument panel (b), refer to dimensions (Figure 2, DETAIL A).
- Make sure that the cutout (A) is correctly aligned with the instrument panel (b).
- Do the cutout (A).
- Deburr all the holes.
- Do the protection with the touch-up pen (6).
- Do the paint touch-up if necessary.
Configuration 2
- Identify the holes (B) on the beam (c). Refer to dimensions (Figure 13, SECTION A-A).
- Drill the holes (B) to a diameter of 3.3 mm in the beam (c).
- Do the electrical bonding on the rivets (11) and the holes (B).
- Install the relay support (10) with two rivets (11).
3.B.2.c. Installation of the FLOAT ARM pushbutton in the new location (Figure 2)
ALL Configurations
- Install in the cutout (A) from the instrument panel (b) (DETAIL A):
• The LED pushbutton (2)
. The sleeve (3).
. The interface seal (7).
- Behind the instrument panel (b), as near as possible to the led pushbutton (2), bond the
label "FLOAT ARM" from:
. The set of labels (4) (CONFs 1 and 3)
. The set of labels (5) (CONFs 2 and 4).
Revision 0 2023-10-25  Page 14/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 15 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3.B.2.d. Adaptation of the routing
3.B.2.d.1. For configuration 1 (Figure 3, Figure 5, Figure 6, Figure 7 and Figure 12)
- Do the routing, with the binding clamp (8) and the spacers (9) of the wires from set of wires (12)
- Bond the label "224L-M1" from the set of labels (4) (SECTION A-A).
- Bond the label "155DEL" from the set of labels (4) (SECTION B-B).
3.B.2.d.2. For configuration 2 (Figure 3, Figure 9, Figure 10, Figure 11 and Figure 13)
- Do the routing, with the binding clamp (8) and the spacers (9) of the wires from set of wires (13)
- Bond the label "224L-M1" from the set of labels (5) (SECTION A-A).
- Bond the label "155DEL" from the set of labels (5) (SECTION B-B).
3.B.2.d.3. For configuration 3 (Figure 3, Figure 5, Figure 6, Figure 7 and Figure 14)
- Do the routing, with the binding clamp (8) and the spacers (9) of the wires from set of wires (12).
- Bond the label "224L-M1" from the set of labels (4) (SECTION A-A).
- Bond the label "155DEL" from the set of labels (4) (SECTION B-B).
3.B.2.d.4. For configuration 4 (Figure 3, Figure 9, Figure 10, Figure 11 and Figure 15)
- Do the routing, with the binding clamp (8) and the spacers (9) of the wires from set of wires (13).
- Bond the label "224L-M1" from the set of labels (5) (SECTION A-A).
- Bond the label "155DEL" from the set of labels (5) (SECTION B-B).
3.B.2.e. Modification of the electrical wiring
3.B.2.e.1. Modification of the electrical wiring with the installed relays "10G" and "11G" (Figure 3, Figure 5,
Figure 6 and Figure 7)
Configurations 1 and 3
- Do the wiring modification with (Figure 5, Figure 6 and Figure 7)
• The set of wires (12)
. The connector (16)
. The contacts (17), (19), (23) and (28)
. The extensions (18)
. The electrical connector (20)
• The modules (21) and (22)
. The blue cable connection (25)
. The braided tubular expanda (24) and (29)
. The module diode (26)
. The socket contacts (27).
- Connect the cable with the shunt connector "155DEL" during the routing (Figure 3, SECTION B-B).
- Do a continuity test on the installed or changed cables.
Revision 0 2023-10-25  Page 15/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 16 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3.B.2.e.2. Modification of the electrical wiring without the relays "10G" and "11G" (Figure 3, Figure 9, Figure 10,
and Figure 11)
Configurations 2 and 4
- Do the wiring modification with (Figure 9, Figure 10 and Figure 11)
The set of wires (13)
. The relays (14)
. The relay sockets (15)
. The connector (16)
. The contacts (17), (19), (23) and (28)
• The extensions (18)
. The electrical connector (20)
. The modules (21) and (22)
. The braided tubular expanda (24) and (29)
. The module diode (26)
. The socket contacts (27).
- Connect the cable with the shunt connector "155DEL" during the routing (Figure 3, SECTION B-B).
- Do a continuity test on the installed or changed cables.
3.B.2.f. Bond the labels on the equipment (Figure 3, Figure 12, Figure 13, Figure 14, Figure 15)
3.B.2.f.1. Bond the labels on the equipment
Configuration 1
- Bond the label "25G" from the set of labels (4) (Figure 3).
- Bond the label "1011N" from the set of labels (4) (Figure 12, DETAIL A).
3.B.2.f.2. Bond the labels on the equipment
Configuration 2
- Bond the label "25G" from the set of labels (5) (Figure 3).
- Bond the label "1011N" from the set of labels (5) (Figure 13, DETAIL A).
- Bond the labels "10G", "11G" from the set of labels (5), as near as possible to their relay support (10)
(Figure 13, DETAIL A and SECTION A-A).
3.B.2.f.3. Bond the labels on the equipment
Configuration 3
- Bond the label "25G" from the set of labels (4) (Figure 3).
- Bond the label "1011N" from the set of labels (4) (Figure 14, DETAIL A).
3.B.2.f.4. Bond the labels on the equipment
Configuration 4
- Bond the label "25G" from the set of labels (5) (Figure 3).
- Bond the label "1011N" from the set of labels (5) (Figure 15, DETAIL A).
- Bond the labels "10G", "11G" from the set of labels (5) (SECTION A-A).
Revision 0 2023-10-25  Page 16/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 17 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3.B.3. Tests
WARNING
BEFORE PERFORMING THE FUNCTIONAL TESTS
OF THE EMERGENCY FLOATATION GEAR
CYLINDER DIAPHRAGMS:
ENSURE THAT THE HELICOPTER IS NOT
POWERED ELECTRICALLY.
ENSURE THAT THE CIRCUIT-BREAKERS FOR THE
EMERGENCY FLOATATION GEAR ARE NOT
ENGAGED.
USE EXCLUSIVELY THE RECOMMENDED TOOLS
IN ORDER TO AVOID THE DANGER OF FIRING
THE SQUIBS
- Set the helicopter to test condition.
- Connect all the electrical power supplies again.
- Energize the helicopter electrical systems
- Do the functional test. Refer to AMM 25-67-00, 5-1.
- De-energize the helicopter electrical systems.
- Do the functional test. Refer to AMM 25-67-00, 5-2.
3.B.4. Final steps
- Clean and apply the close-up procedure to the work areas and the helicopter. Refer to
Work Card 20-07-03-408 (MTC).
- Install the cowlings below the bottom structures. Refer to Task 53-51-00, 4-2 (AMM).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Remove the access equipment.
- Set the helicopter to flight condition.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the full compliance with this ALERT SERVICE BULLETIN (refer to IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 2
The recording of compliance with ALERT SERVICE
BULLETINS in the SB insight tool does not replace the
recording in the helicopter documents.
ASB EC130-25A158
Tracking of modifications in the documentation:
Record the modification 0720175 in the helicopter documents.
Revision 0 2023-10-25  Page 17/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 18 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
CAUTION
BEFORE THE NEXT FLIGHT, MAKE SURE THAT
YOUR FLIGHT MANUAL (FLM) IS AT THE LATEST
UPDATE APPROVED BY THE APPLICABLE
AUTHORITIES.
Refer to Flight Manual (FLM) SUP.17 RN1 from 22-22 or higher.
Maintenance instructions:
Not applicable.
Revision 0 2023-10-25  Page 18/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 19 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
ALL CONF
B
PRE MOD  POST MOD
SMS BLOCK  SMS BLOCK
Back to paragraph 3.B.2.a.
Figure 1
Revision 0 2023-10-25  Page 19/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 20 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 20/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 21 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
ALL CONF
Back to paragraphs 3.B.2.b. and 3.B.2.c.
Figure 2
Revision 0 2023-10-25  Page 21/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 22 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 22147
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 23 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
4 or 5-
ALL CONF
SECTION
B-B
224L-M1 - 4 or 5  SECTION
A-A
•
Z -2570
КІв
155DEL -4 or 5
Back to paragraphs 3.B.2.d.1., 3.B.2.d.2., 3.B.2.d.3., 3.B.2.d.4., 3.B.2.e.1., 3.B.2.e.2. and 3.B.2.f.
Figure 3
Revision 0 2023-10-25  Page 23/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

### Page 24 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 24/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 25 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 1 AND 3
PRE MOD
28V OUTPUT  REP1104
28V OUTPUT  - REP1105
- 1GR85E
IGR53NG  - REP1138
BOTTLE GND  -1GR58NG-  CF 18-
BOTTLE GND  -1GR75NG-  • CF 18-
PERCUSSION GND CTL  -1GR6NE -  REP1139-
1071N-4  HOLD  CONSOLE RELAY
695
PERCUSSION GND CTL  - 1GR3NE
BOTTLE GND  - CF 18
- 1GR90NE
BOTTLE GND  -1GR56NG -  - CF 18-
GND IN  -1GR59NG-  1011N-1
GND IN  -1GR77NE -  - CF 18-  U/CA FLOOR  635
• 1GR88E-  REP1140 -  - 1GR86E •
071N-:  IOLI  CONSOLE RELAY
695
1GR50E  CONSOLE  ROL BOX
1GR64E
- 1GR76NG
PERCUSSION CTL
IREP0403
PERCUSSION CTL  1GR2E
1GR61E-
1 GR63E.
1G  FLOATATION BOX  22AL FLOO COLL LEVER PRINTED CIRCUIT  22ALP
HOLD
695
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 20
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraph 3.B.2.a.
Figure 4
Revision 0 2023-10-25  Page 25/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 26 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 26/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 27 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 1 AND 3
20  POST MOD
E0290  CF 20  28V OUTPUT
REP8297-  • CF 20  28V OUTPUT
SEE FIGURE 7  1GR50E -  - CF 20 -
23  CF 20
1GR53NG -  - 05 20
- 1GR3NE-  CF 20  PERCUSSION GND CTL
1GR531E -  - REP1138 - CF 20-
- 1GR52NG - CF 18-  BOTTLE GND
1GR89NE CF 20-  - 1GR56NG- CF 18 -  BOTTLE GND
• 1GR59NG - CF 20  GND IN
GROUNDING STRIF  - 1GR77NE - CF 18-  GND IN
19  GROUNDING STRIP
REP1141--  - 1GR88E-
1 GR532E  • 26  10G  RELAY  CF 20  - 1GR58NG - CF 18-  BOTTLE GND
CONSOLE  - 1GR75NG - CF 18 -  BOTTLE GND
645
1GR6NE  - CF 20-  PERCUSSION GND CTL
TERMINA STRI  REP8299 -D SEE FIGURE 6  - 1GR76NG - CF 20 - -
19  27  GROUNDING STRIP
1GR527E  1GR533E
1GR536E
224L  TERMINAL STRIP
CONSOLE
1GR528E  • - REP1140-  --CF 20-
SEE SHEETS
--CF 20 -
INST PANEL  11G  RELAY
9 JUNCTION LINE  CONSOLE
1GR535NE  645
P1 155DEL-J1  1GR64E - - CF 20-
U/CA FLOOR U/CA FLOOR  22ALP-1  - 1GRSE-W-SJ20 - (4)  PERCUSSION CTL
25G  INST PANEL  645  FLOAT ARM BUTTON  SHUNT CONNECTOR  635 635  - 1GRE-W-SJ 20 - 1) - A  REP0403|
-1GR61E - - CF 20 -  PERCUSSION CTL
- 1GR62E - - CF 20-
- 1GR63E - - CF 20-
22ALP  COLL LEVER PRINTED CIRCUIT  1G  FLOATATION BOX
U/CA FLOOR  HOLD
635  695
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DR22
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraphs 3.B.2.d.1., 3.B.2.d.3. and 3.B.2.e.1.
Figure 5
Revision 0 2023-10-25  Page 27/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

### Page 28 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 28/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 29 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 1 AND 3
PRE MOD
TEST
4ALP  WARNING PANEL
INST PANEL
P4 645
TEST
→ SEE HYDRAULIC WIRING  61E  VEMD
INST PANEL
645
TEST
SIGNALISATION TEST OVERHEAD PANEL  INST PANEL  PLATE INST PANEL
LK219E  645
NSOLE
→ SEE FIGURE 5  SOLE
30ALP  ELECTRICAL SYST CONTROL BOX  ONSOLE  ONSOLE
CONSOLE
645
POST MOD
1LK247E - - CF 22 -  TEST
2G  4ALP  WARNING PANEL
INST PANEL
P4 645
TEST
→ SEE HYDRAULIC WIRING  61E  VEMD
INST PANEL
645
1LK301E  - CF 22  TEST
2K  REP0372  → SIGNALISA®  RHEAD PANEL  INST PANEL PLATE INST PANEL
2J
140L  LK302E
→ SEE FIGURE 5  CONSOLE  645  CONSOLE  REP0374-  -DR 22  SEE FIGURE 5
30ALP  ELECTRICAL SYST CONTROL BOX  ISOLE  CONSOLE
CONSOLE
645
CONSOLE
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 20
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraphs 3.B.2.d.1., 3.B.2.d.3. and 3.B.2.e.1.
Figure 6
Revision O 2023-10-25  Page 29/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 30 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 30/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 31 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 1 AND 3
PRE MOD
1LK266E - - CF 20  +LAMP
NORM LTS  1LK264E - - CF 20 -  SORTIE P3
GROUND  1LK265E- - CF 20 -  GROUND (LAMP)
1LK367E - - CF 20 -  CTRL LAMP JVN
1LK267E - - CF 20 -  CTRL LAMP J/N
INDICATOR GND  1LK308E - - CF 20 -  INDICATOR GND
INST PANEL  150L-P1  PLATE INST PANEL  148L  UCA FLOORM LIGHTING POWER
645  635
POST MOD
1GR529E -  DR 22- → SEE FIGURE 5
NORM LTS  REP8319-  - CF 20-
1LK264E -  - CF 20 -  SORTIE P3
JUNCTION LINE
28 12  INST PANEL
• REP8318-  • 1GR524E -  - DR 22 - → SEE FIGURE 5
- CF 20
ILK267E -  - CF 20 -  CTRL LAMP J/N
GROUND  1LK265E  • CF 20  GROUND (LAMP)
1LK367E -  - CF 20  CTRL LAMP JVN
1LK266E -  - CF 20 -  +LAMP
INDICATOR GND  - 1LK308E -  - CF 20  INDICATOR GND
150L-P1 PLATE INST PANEL  UCA FLOORM LIGHTING POWER
INST PANEL
645
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 22
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA
Back to paragraphs 3.B.2.d.1., 3.B.2.d.3. and 3.B.2.e.1.
Figure 7
Revision 0 2023-10-25  Page 31/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

### Page 32 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 32147
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 33 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 2 AND 4
PRE MOD
28V OUTPUT  - REP1104
28V OUTPUT
BOTTLE GND  -1GR58NG-
BOTTLE GND  -1GR75NG-
PERCUSSION GND CTL  -1GR6NE -
1071N-4
HOLD
695
PERCUSSION GND CTL  - 1GR3NE
BOTTLE GND  1GR52NG  - CF 18
BOTTLE GND  -1GR56NG -  - CF 18
GND IN  -1GR59NG-
GND IN  -1GR77NE -  - CF 18-
- 1GR50E  CONSOLE
1GR64E
- 1GR76NG  COPILO
PERCUSSION CTL  0 47
IREP0403
PERCUSSION CTL  1GR2E
• 1GR61E-
1GR63E.
1G  FLOATATION BOX  22ALFLOO COLL LEVER PRINTED CIRCUIT  22ALP
HOLD
695  635
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 20
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraph 3.B.2.a.
Figure 8
Revision 0 2023-10-25  Page 33/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 34 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 34/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 35 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 2 AND 4
13  29  20  21  POST MOD
28V OUTPUT
REP8305  CF 20  28V OUTPUT
SEE FIGURE I  - CF 20 -
GR49E  CF 20
- 1GR53G  - 05 20
REP8306  - 1GR3NF  CF 20  PERCUSSION GND CTL
- 1GR52NG - CF 18-  BOTTLE GND
ICTION LINE
- 1GR552NE  - 1GR56NG - CF 18 -  BOTTLE GND
19  • 1GR59NG - CF 20  GND IN
U1TN-1 GROUNDING S RE  - 1GR77NE - CF 18 -  GND IN
26  GROUNDING STRIP
19  19  RELAY  - 1GR58NG - CF 18-  BOTTLE GND
CONSOLE  - 1GR75NG- CF 18 -  BOTTLE GND
645
1GR6NE  - CF 20-  PERCUSSION GND CTL
TERMINA STRIF  REP8310 -D SEE FIGURE 10  - 1GR76NG- CF 20 - 7
GROUNDING STRIP
1GR543E  1GR550E
1GR554E -
TERMINAL STRIP
NSOLE
IGR544E  1GR55  REP8307  X1
SEE FIGURE 11  15
GR555NE
18  19  JUNCTION LINE  VST PANEL  JUNCTION LINE  23  19  CONSOLE  11G  RELA
1R546  1GR547NE  645
17.  P1 155DEL-J1  • - CF 20 -
U/CA FLOOR U/CA FLOOR  22ALP-1  7 1GRSE-W-SJ 20 -  PERCUSSION CTL
25G  INST PANEL  645  FLOAT ARM BUTTON  SHUNT CONNECTOR  635 635  71GR2E-W-SJ 20 - (1) -  REP0403|
-1GR61E - - CF 20 -  PERCUSSION CTL
-1GR62E - - CF 20 -
- 1GR63E - - CF 20-
22ALP  COLL LEVER PRINTED CIRCUIT  HOLD FLOATATION BOX
U/CA FLOOR
635  695
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DR22
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraphs 3.B.2.d.2., 3.B.2.d.4. and 3.B.2.e.2.
Figure 9
Revision 0 2023-10-25  Page 35/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

### Page 36 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 36/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 37 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 2 AND 4
PRE MOD
TEST
4ALP  WARNING PANEL
INST PANEL
P4 645
TEST
→ SEE HYDRAULIC WIRING  61E  VEMD
INST PANEL
645
TEST
150L  PLATE INST PANEL
SIGNALISATION TEST OVERHEAD PANEL  INST PANEL
LK219E  645
→ SEE FIGURE 9  NSOLE
SOLE
30ALP  ELECTRICAL SYST CONTROL BOX  ONSOLE
CONSOLE
645
POST MOD
1LK247E - - CF 22 -  TEST
2G  4ALP  WARNING PANEL
INST PANEL
P4 645
TEST
→ SEE HYDRAULIC WIRING  61E  VEMD
INST PANEL
645
ILK301E.  - CF 22  TEST
2K  REP0372  → SIGNALISA®  HEAD PANEL  INST PANEL PLATE INST PANEL
1LK219E  2J
140L  1LK302E
→ SEE FIGURE 9  CONSOLE  645  CONSOLE  REP0374-  DR 22  SEE FIGURE 9
30ALP  CONSOLE  ELECTRICAL SYST CONTROL BOX  ISOLE  CONSOLE 13  19
645
CONSOLE
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 20
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA0
Back to paragraphs 3.B.2.d.2., 3.B.2.d.4. and 3.B.2.e.2.
Figure 10
Revision 0 2023-10-25  Page 37147
This document is available on the Internet: www.airbus  elicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 38 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 38/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 39 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 2 AND 4
PRE MOD
1LK266E - - CF 20  +LAMP
NORM LTS  1LK264E- - CF 20 -  SORTIE P3
GROUND  1LK265E- - CF 20 -  GROUND (LAMP)
1LK367E- - CF 20 -  CTRL LAMP JVN
1LK267E - - CF 20 -  CTRL LAMP J/N
INDICATOR GND  1LK308E - - CF 20 -  INDICATOR GND
INST PANEL  150L-P1  PLATE INST PANEL  148L  UCA FLOORM LIGHTING POWER
645  635
POST MOD
18.
13
1GR545E -  DR 22- → SEE FIGURE 9
NORM LTS  LREP8317 -  - CF 20-
• 1LK264E  - CF 20 -  SORTIE P3
18  JUNCTION LINE
INST PANEL
28  13
REP8316-  - CF 20  • 1GR540E -  - DR 22 - → SEE FIGURE 9
1LK267E  — CF 20 -  CTRL LAMP J/N
JUNCTION LINE
GROUND  1LK265E  CF 20  GROUND (LAMP)
1LK367E -  - CF 20  CTRL LAMP JVN
1LK266E -  - CF 20 -  +LAMP
INDICATOR GND  • 1LK308E -  - CF 20  INDICATOR GND
150L-P1 PLATE INST PANEL  UCA FLOORM LIGHTING POWER
INST PANEL
645
NOTE: UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF 22
SHIELDING CONTINUITY WIRES ARE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1BA
Back to paragraphs 3.B.2.d.2., 3.B.2.d.4 .and 3.B.2.e.2.
Figure 11
Revision O 2023-10-25  Page 39/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 40 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 40/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 41 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 1
SECTION
A-A
11G
Back to paragraphs 3.B.2.d.1. and 3.B.2.f.
Figure 12
Revision 0 2023-10-25  Page 41/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 42 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 42147
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 43 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 2
1011N 5
SECTION  SECTION
B-B  A-A
Z -2570.35
Z -2570
÷
IOG 5.
11G 5
Back to paragraphs 3.B.2.b., 3.B.2.d.2. and 3.B.2.f.
Figure 13
Revision O 2023-10-25  Page 43/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 44 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 44/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 45 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 3
155DEL
1011N 4
SECTION
A-A
11G
Back to paragraphs 3.B.2.d.3. and 3.B.2.f.
Figure 14
Revision O 2023-10-25  Page 45/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 46 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-10-25  Page 46/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 47 (OCR)

AIRBUS  HELICOPTERS
No. EC130-25A158
CONF 4
SEE
1011N 5
SECTION
A-A
5 11G
Back to paragraphs 3.B.2.d.4. and 3.B.2.f.
Figure 15
Revision 0 2023-10-25  Page 47/47
This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
