# Eurocopter Alert Service Bulletin EC130-63A026

Copy: No revision named ("ASB_EC130-63A026 Rev 0"), 14 pages: PDF https://openairdocs.org/files/sha256/93/e3/93e370253248a0bd52bffb0bb8070ece4e1b085d7140b08c544f1f6edb066812; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-63a026/file/93e370253248.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-4638, the docket of AD 2026-16-01. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC130-63A026
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec130-63a026

## Text (14 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-4638, the docket of AD 2026-16-01. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
Civil version(s): B4, 12
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
MAIN ROTOR DRIVE - Main Gear Box (MGB) engine coupling
Check the correct assembly of the MGB engine coupling flange
For the attention of
Revision No.  Date of issue
Revision 0  2023-05-31
Summary:
The purpose of this ALERT SERVICE BULLETIN is to check the assembly direction of the flange and to correctly
re assemble it if necessary.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2023-05-31  Page 1/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters EC130 all versions delivered before February 13, 2023 (date of statement of conformity, EASA
form 52 or equivalent).
NOTE
Helicopters  EC130  all  versions  delivered  on
February 13, 2023 or after February 13, 2023 are not
concerned with this ALERT SERVICE BULLETIN.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Cases of inverted assembly of the Engine Flange on MGB engine coupling have been detected by
Airbus Helicopters.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to check the assembly direction of the
flange and to correctly re assemble it if necessary.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- Check the assembly of the MGB engine coupling.
- Make an analysis of the results.
- It necessary:
• Remove the MGB engine coupling incorrectly assembled.
. Remove the flange from the MGB engine coupling.
. Install the flange on the MGB engine coupling correctly.
. Install the MGB engine coupling correctly assembled.
. Send back the response form to Airbus Helicopters.
Revision 0 2023-05-31  Page 2/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
Comply with paragraph 3. of this ALERT SERVICE BULLETIN not more than 165 flight hours or 12 months
and 36 days (the first limit you get to is applicable) after you received revision 0 of this
ALERT SERVICE BULLETIN (refer to the issue date on the page footer).
Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: 1 hour for the mechanical technician (excluding time to modify the MGB engine
coupling).
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is 1 hour.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
Revision 0 2023-05-31  Page 3/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (AMM):
AMM: 63-11-00, 4-1: Removal - MGB / Engine Coupling - Engine / MGB Drive line
AMM: 63-11-00, 4-2: Installation - MGB / Engine Coupling - Engine / MGB Drive line
AMM: 63-11-00, 6-1: Detailed Inspection Criteria - Flexible Coupling - Engine / MGB Drive line
AMM: 63-11-00, 6-9: Inspection Criteria - Engine Flange - Engine / MGB Drive line
Standard Practices Manual (MTC):
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
Information Notices (IN):
IN: 2832-1-00: Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical
investigation/core unit return
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2023-05-31  Page 4/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction des Ventes et Relation Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2023-05-31  Page 5/14
This document is available on the Internet: www. airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or parts to be ordered separately:
Former
Key Word  Qty  New reference  Item
reference → Instruction
Flange  1
Flexible coupling  1
Pin  A/R  Replace, if
Screw  AIR  Refer to Illustrated  necessary, with
Washer Ø 18 mm  A/R  Refer to IPC.  the same MP/N
Washer ø 20 mm  AIR  Part Catalog (IPC).  as that found on
Washer flector  AIR  the helicopter.
Washer  A/R
Nut  AIR  9
Consumables to be ordered separately:
Refer to Work Cards and Tasks given in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN and the list below:
Key word  Qty  Tool reference or equivalent  Item
Endoscope  Commercial  ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2023-05-31  Page 6/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Install the access equipment.
- Remove and/or open all applicable cowlings, panels, doors and other equipment items to get access to the
different work areas.
3.B.2. Procedure
3.B.2.a. Inspection of the flange of the MGB engine coupling
- Position the endoscope (zz) through room access of the engine coupling housing (a) (Figure 1 and
Figure 2).
Figure 1
•ZZ
Figure 2
Revision 0 2023-05-31  Page 7/14
This document is available on the Internet: www.airb  helicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
- Make sure that the flange (b) of MGB engine coupling (c) is correctly assembled with the endoscope (zz)
(Figure 3 and Figure 6).
Shoulder (b') with fillet radius  Cylindrical shoulder (b")
FWD
FWD
L2
- b'
- b"
INCORRECT ASSEMBLY
CORRECT ASSEMBLY  (Flange (b) in incorrect position)
(Flange (b) in correct position)
SECTION
FWD
A-A
Shoulder (b')
with Fillet
radius  Cylindrical
shoulder (b")
p-
CORRECT ASSEMBLY
(Flange (b) in correct
position)
Figure 3
NOTE 1
Incorrect assembly can be identified with a check of relative
length (L1) of the head (p) of the screw and the length (L2)
of the shoulder (b). The head (p) of the screw is two times
shorter than the shoulder (b") (Figure 3 and Figure 6).
Revision 0 2023-05-31  Page 8/14
This document is available on the Internet: www.airbu  elicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
3.B.2.b. Analysis of the results
Shoulder (b')
with Fillet
radius
Engine side  MGB side
CORRECT ASSEMBLY
(Flange (b) in correct position)
Figure 4
- If the flange (b) is correctly assembled (Figure 4 and Figure 6):
. Remove the endoscope (zz) from the room access of the engine coupling housing (a).
. Comply with paragraph 3.B.3.
- If the flange (b) is incorrectly assembled:
. Comply with paragraph 3.B.2.c.
Revision 0 2023-05-31  Page 9/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
3.B.2.c. Removal of the flange incorrectly assembled from the MGB engine coupling (Figure 5)
- Refer to Task 63-11-00, 4-1 (AMM):
• Remove the MGB engine coupling (c) from the helicopter.
. Remove the flange (b) and the flexible coupling (d) from the MGB engine coupling (c).
. The screws (e)
. The washers (f), (k) and (m)
• The washers flector (n)
. The nuts (h)
. The pins (g).
- Do an inspection of the flange (b) of the MGB engine coupling. Refer to Task 63-11-00, 6-9 (AMM).
- Do an inspection of the flexible coupling (d) of the MGB engine coupling. Refer to
Task 63-11-00, 6-1 (AMM).
3.B.2.d. Installation of the flange correctly assembled on the MGB engine coupling (Figure 5)
CAUTION
FOR  CORRECT INSTALLATION OF THE
FLANGE (b) OR (1), THE HEADS OF THE
SCREWS (4) MUST BE ON THE CHAMFER SIDE
(AREA A). REFER TO DETAIL C.
- Refer to Task 63-11-00, 4-2 (AMM):
. Install the flange (b) or the new flange (1) and the flexible coupling (d) or the new flexible coupling (2) on
the MGB engine coupling (c) with:
.. The new screws (4)
.. The new washers (5), (6) and (8)
.. The new washers flector (7)
.. The new nuts (9)
.. The new pins (3).
• Install the MGB engine coupling (c) correctly assembled on the helicopter.
- Send the response form to Airbus Helicopters (see Appendix 4.A.).
3.B.3. Final steps
- Do an appearance check on the helicopter after inspection or repair. Refer to the
Work Card 20-07-03-408 (MTC).
- Install again or close all cowlings, panels, doors and equipment removed and/or opened during preliminary
steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Connect all the electrical power supplies. Refer to the Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
- Comply with paragraph 3.C.
Revision 0 2023-05-31  Page 10/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 2
The  recording  of  compliance  with
ALERT SERVICE BULLETINS in the SB Insight tool does
not replace the recording in the helicopter documents.
ASB EC130-63A026
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2023-05-31  Page 11/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
g
n
e
E 00
Area A
Area A
Back to paragraphs 3.B.2.c. and 3.B.2.d.
Figure 5
Revision 0 2023-05-31  Page 12/14
This document is available on the Internet: www.airb  elicopters.com/techpub/

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
D
FWD
CORRECT ASSEMBLY (Flange  SECTION
(b) in correct position)
E-E
Shoulder (b')
with Fillet
radius  Cylindrical
shoulder (b")
Chamfer
p  or
4
or
4
Back to paragraph 3.B.2.a.
Figure 6
Revision 0 2023-05-31  Page 13/14
This document is available on the Internet: www.a  •licopters.com/techpub/

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. EC130-63A026
4. APPENDIX
4.A. RESPONSE FORM
AIRBUS  SB ID Card Questionnaire  Page 1 of 1
Airbus Helicopters  Questionnaire for EC130-63A026
SB ID Card
Title
Check the correct assembly of the flange MGB engine coupling
Description
The purpose of this ALERT SERVICE BULLETIN is to check the assembly direction of the flange and to correctly re assemble it
if necessary.
Compliance information
Applied on:
On aircraft or Off aircraft
AC S/N:  Part number:
Questionnaire
What is the MGB P/N and MGB S/N? *
Before compliance with this ALERT SERVICE BULLETIN, was Task 63-11-00,4-2 (AMM) applied on the MGB-engine
coupling installed on the helicopter? *
• Yes D No
Did you replace the flange following compliance with this ALERT SERVICE BULLETIN? *
• Yes • No
Did you replace the flexible coupling following compliance with this ALERT SERVICE BULLETIN? *
• Yes • No
Upload pictures of incorrect assembly or damaged parts *
Revision 0 2023-05-31  Page 14/14
This document is available on the Internet: www.a  elicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
