# Airbus Helicopters Alert Service Bulletin EC130-76A013

Copy: Revision 1 ("Airbus ASB EC130-76A013 Rev 1"), 21 pages: PDF https://openairdocs.org/files/sha256/1f/ec/1fec6789cc8c1f7ef8e5490a9cfcf49187d34da7015af0ab6e0a28ec2e7f40e5; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-76a013/file/1fec6789cc8c.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1108, the docket of AD 2025-18-13. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC130-76A013
- Latest revision known: EC130-76A013, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec130-76a013

## Text (21 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1108, the docket of AD 2025-18-13. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
Civil version(s): B4, T2
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
ENGINE CONTROLS - Twist Grip
Replacement of microswitches 53Ka, 53Kb and 65K of the engine
power control
Related to modification 074782
For the attention of
Revision No.  Date of issue
Revision 0  2023-04-17
Revision 1  2023-10-25
Summary:
The objective of this ALERT SERVICE BULLETIN is to replace microswitches 53Kа, 53Kb and 65K used in the
engine power control (IDLE / FLIGHT mode regulation) on the twist grip with components that are compliant with
operations in corrosive environment. Consequently, the installation at the end of the collective stick is modified.
Reason for last Revision:
The objective of this revision of this ALERT SERVICE BULLETIN is to:
- Do a modification in Section A-A of Figure 2 to show the correct location of a clearance on the support plate
assembly
- Do a check of the tightening torque and the clearance on the support plate assembly of the microswitches, if
necessary
- Remove the support plate assembly and install it again with correct clearance, if necessary.
Compliance:
For Airbus Helicopters it is mandatory to comply with the instructions contained in this ALERT SERVICE BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR
Revision 0  2023-04-17  Page 1/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
1.  PLANNING INFORMATION
CAUTION
MAKE  SURE THAT THE MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE THE NECESSARY ADAPTATION
WORK.
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY  WITH  THE  AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THE INDIVIDUAL INSPECTION LOG
BOOK. IT INCLUDES ONLY THE POST-DELIVERY
CONFIGURATION CHANGES THAT ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
Revision 0 2023-04-17  Page 2/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_  _EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters with microswitch reference T3933-3.
PRE ALERT SERVICE BULLETIN  POST ALERT SERVICE BULLETIN
REFERENCE T3933-3  REFERENCE 10AT531-1
MICROSWITCH  MICROSWITCH
NOTE 1
Microswitches  (PRE ALERT  SERVICE BULLETIN)
reference T3933-3 belong to the removed switch support
assembly reference 350A27-3244-01.
1.A.2. Non-installed equipment or parts
- Transparent protective cover reference 350A27-3250-03
- Switch support assembly reference 350A27-3244-01
- Wiring harness reference 350A67-0312-00AA
- Pilot twist grip reference 350A27-5209-04 or 350A27-5209-0401 or 350A27-5209-06
1.B. ASSOCIATED REQUIREMENTS
CAUTION
BEFORE THE NEXT FLIGHT, MAKE SURE THAT
THE MASTER SERVICING MANUAL IS AT THE
LATEST UPDATE. MAKE SURE THAT THIS
UPDATED MASTER SERVICING MANUAL IS
APPROVED BY THE APPLICABLE AUTHORITIES
OR THROUGH A DELIVERY NOTE.
Revision 0  2023-04-17  Page 3/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
1.C. REASON
Revision 0:
After an incident in 2015 (significant loss of power in flight), which occurred during an offshore flight, the
subsequent investigations and tests showed that environmental conditions could cause the microswitches
involved to operate incorrectly (malfunction related to the possible presence of salt water on the terminals of
the microswitches).
The malfunction of a microswitch can prevent the change from "IDLE" mode to "FLIGHT" mode.
As a precautionary measure, EMERGENCY ALERT SERVICE BULLETINS No. 05A009 (for B4 version) and
No. 05A014 (for T2 version) were published in 2015 in order to apply protective varnish to each terminal of
the microswitches (MOD 074699).
This operation must be done again at different times depending on the environment in which the helicopter is
used (salt laden atmosphere or not).
The objective of this ALERT SERVICE BULLETIN is to replace microswitches 53Kа, 53Kb and 65K used in
the engine power control (IDLE / FLIGHT mode regulation) on the twist grip with components that are
compliant with operations in corrosive environment. Consequently, the installation at the end of the collective
stick is modified.
The application of this ALERT SERVICE BULLETIN replaces the instructions of ALERT SERVICE
BULLETINS No. 05A009 (for B4 version) and No. 05A014 (for T2 version).
PRE ALERT SERVICE BULLETIN POST ALERT SERVICE BULLETIN
REFERENCE T3933-3  REFERENCE 10AT531-1
HANDLE, TWIST, BOX ASSY  HANDLE, TWIST, BOX ASSY
MICROSWITCH  MICROSWITCH
Revision 0  2023-04-17  Page 4/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
NOTE 2
Microswitches (POST ALERT SERVICE BULLETIN)
reference 10AT531-1 belong to the new support plate
assembly reference 350A27-5627-00.
Revision 1:
The objective of this revision of this ALERT SERVICE BULLETIN is to:
- Do a modification in Section A-A of Figure 2 to show the correct location of a clearance on the support plate
assembly
- Do a check of the tightening torque and the clearance on the support plate assembly of the microswitches,
if necessary
- Remove the support plate assembly and install it again with correct clearance, if necessary.
Revision 1 of this ALERT SERVICE BULLETIN has an effect on the compliance with revision 0 of this
ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- Removal of the former engine power control microswitches 53Ka, 53Kb and 65K
- Installation of the new assembly of engine power control microswitches 53Kа, 53Kb and 65K.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3. before the delivery of
the helicopter.
Non-installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3. before the delivery of
the equipment.
1.E.2. Compliance in service
It is the operator who does the work on the helicopter.
Helicopters/installed equipment or parts:
For helicopters that did not comply with revision O of this ALERT SERVICE BULLETIN:
- For helicopters operating and having operated in a salt laden atmosphere:
Comply with paragraph 3.B. (but this is not applicable to paragraphs 3.B.2.c. and 3.B.2.d.) not more
than 1320 Flight Hours (FH) or 24 months and 73 days (the first limit you get to is applicable) after you
received revision 0 of this ALERT SERVICE BULLETIN. Refer to the issue date of revision O on the page
footer.
Revision 0  2023-04-17  Page 5/21
Revision 1  2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
- For helicopters not operating and having never operated in a salt laden atmosphere:
Comply with paragraph 3.B. (but this is not applicable to paragraphs 3.B.2.c. and 3.B.2.d.) not more
than 2640 Flight Hours (FH) or 48 months and 146 days (the first limit you get to is applicable) after you
received revision 0 of this ALERT SERVICE BULLETIN. Refer to the issue date of revision 0 on the page
For helicopters that complied with revision 0 of this ALERT SERVICE BULLETIN:
- For helicopters operating and having operated in a salt laden atmosphere:
Comply with paragraphs 3.B.1., 3.B.2.c., 3.B.3. (if necessary) and 3.B.4. not more than 1320 Flight Hours
(FH) or 24 months and 73 days (the first limit you get to is applicable) after you received revision 1 of this
ALERT SERVICE BULLETIN. Refer to the issue date of revision 1 on the page footer.
- For helicopters not operating and having never operated in a salt laden atmosphere:
Comply with paragraphs 3.B.1., 3.B.2.c., 3.B.3. (if necessary) and 3.B.4. not more than 2640 Flight Hours
(FH) or 48 months and 146 days (the first limit you get to is applicable) after you received revision 1 of this
ALERT SERVICE BULLETIN. Refer to the issue date of revision 1 on the page footer.
Non-installed equipment or parts:
When you receive this ALERT SERVICE BULLETIN, discard the stock. Refer to paragraph 3.B.
Comply with paragraph 3. when you replace the pilot twist grip reference 350A27-5209-04 or
350A27-5209-0401 or 350A27-5209-06.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
For helicopters operated outside the terrain regulated by the EASA, the application of this document is
subject to validation provided by the responsible aviation authority of the state of registry.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: 4 hours for the Mechanical Technician.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is half a day.
Revision 0  2023-04-17  Page 6/21
Revision 1  2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
1.H. WEIGHT AND BALANCE
There is almost no change in weight and moment.
1.l. POWER CONSUMPTION
Not changed.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (AMM):
AMM: 24-00-00, 3-1:  General Instructions - Electrical Systems - Electrical Power Supply System
AMM: 53-51-00, 4-2:  Removal / Installation - Lower Cowlings - Cowlings
AMM: 60-00-00, 3-1:  General Instructions - Mechanical Assemblies - General - Mechanical Systems
AMM: 76-00-00, 3-1:  General Safety Instructions - Engine Controls - Engine Controls
AMM: 76-12-03, 4-1B:  Removal / Installation - Twist Grip Contactors POST MOD 073773 -
ARRIEL 2B1 twist grip
AMM: 76-12-03, 4-2:  Removal / Installation - Twist Grip Load Spring POST MOD 073773 -
ARRIEL 2B1 twist grip
AMM: 76-12-03, 5-2A:  Adjustment - Twist Grip Loads (PRE MOD 073773) - ARRIEL 2B1 twist grip
AMM: 76-12-03, 5-2B:  Adjustment - Twist Grip Loads (POST MOD 073773) - ARRIEL 2B1 twist grip
AMM: 76-12-03, 6-3:  Check - Twist grip contact switch - ARRIEL 2B1 twist grip (POST MOD 07.4782)
AMM: 76-12-04, 4-1:  Removal / Installation - Twist Grip Contactors - ARRIEL 2D twist grip
AMM: 76-12-04, 4-2:  Removal / Installation - Twist Grip Load Spring - ARRIEL 2D twist grip
AMM: 76-12-04, 5-2:  Adjustment - Twist Grip Loads - ARRIEL 2D twist grip
AMM: 76-12-04, 6-3:  Check - Twist grip contact switch - ARRIEL 2D twist grip (POST MOD 07.4782)
Standard Practices Manual (MTC):
MTC: 20-02-01-602:  Cables insulation / continuity test procedure - General
MTC: 20-02-05-101:  ISO M and ISO MJ threads: General - Joining
MTC: 20-02-05-404:  Assembly by screws and nuts - Joining
MTC: 20-02-06-101:  Safetying assemblies: General - Safetying and locking assemblies
MTC: 20-02-06-401:  Safetying plain pins - Safetying and locking assemblies
MTC: 20-02-06-402:  Safetying with lockwire - Safetying and locking assemblies
MTC: 20-02-06-404:  Safetying with cotter pins - Safetying and locking assemblies
MTC: 20-04-01-102:  Use of cleaning products on individual parts and on aircraft - Cleaning
MTC: 20-04-01-401:  Cleaning of mechanical parts - Cleaning
MTC: 20-07-02-201:  Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-406:  Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408:  Appearance checks on an aircraft after an inspection or repair - Technical instructions
Revision O  2023-04-17  Page 7/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
MTC: 20-80-20-402:  Installation / Removal of Cable Ties - Standard Practices - Electrical Power
MTC: 20-80-20-449:  Protection of electrical wiring during maintenance operations - Standard Practices -
Electrical Power
MTC: 20-80-20-603:  Securing Rules for Electrical Harnesses - Standard Practices - Electrical Power
Information Notice (IN):
IN 3481-1-00: The Marketplace: An AirbusWorld Ordering service
IN 3686-1-00: Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes
IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Promotion Notice (SPN):
SPN: 3703-P-00: Foreign Object Damage prevention
1.L. OTHER AFFECTED PUBLICATIONS
For B4 version only
The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this ALERT
SERVICE BULLETIN will be incorporated in the next Normal Revision. Refer to DN 008.0020 until the
information is available in the published technical documentation.
NOTE 3
You can find more information about Delivery Notes in
Information Notice IN 3686-1-00.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
The PRE MOD and POST MOD components are not interchangeable.
Mixability:
You must not use the PRE MOD and POST MOD components together.
Revision 0  2023-04-17  Page 8/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
The Airbus Helicopters Program Department (Ecureuil) will supply the components free of charge.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Key Word  Qty  Reference  New  Item  Former  Reference  →  Instruction
MICROSWITCHES  350A08-8757-0071
RETROFIT KIT
Support plate  1  350A27-5627-00  1  350A27-3244-01  Discard
assembly
Harness  info  For information only  1a  For info
Collective handle  info  For information only  1b  For into
wires
Washer  1  350A27-3236-21  2
Flat washer  7  23111AG050LE  3
Hexagonal castellated  1  ASNA0044BC050L  4
nut
Revision O  2023-04-17  Page 9/21
Revision 1  2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
Kits to be ordered for one helicopter or one assembly (cont.):
Key Word  Qty  Reference  New  Item  Former  Reference  →  Instruction
MICROSWITCHES  350A08-8757-0071
RETROFIT KIT (cont.)
Split pin  EN2367-14010  5
Bolt  2  22202BC050020L
Spacer sleeve  2  MBBN3131N0520
Hexagonal head bolt  22202BE060029L  8
Screw  22202BC050030L  10
Hexagonal head bolt  22209BC050008L  11
Nut  22437BC060L  12
Split pin  EN2367-10012  13
Hexagonal head bolt  22208BC050010L  15
Hexagonal head bolt  22208BC050012L  16
Self-locking hexagonal  2  ASN52320BH050N  17
nut
Equipment or parts to be ordered separately:
New  Former
Key Word  Qty  Reference  Item  Reference  → Instruction
Clamp  1  55G06  14
Cable tie  5  E0043-1COP  18
Consumables to be ordered separately:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN and the list below:
Key Word  Qty  Reference  CM  Item
Lockwire  2 m  EN3628-0,63  CM 775  9
You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering
(IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision O  2023-04-17  Page 10/21
Revision 1  2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Comply with the general electrical instructions. Refer to Task 24-00-00, 3-1 (AMM).
- Comply with the general safety instructions about the mechanical assemblies. Refer to
Task 60-00-00, 3-1 (AMM).
- Comply with the general safety instructions about the engine controls. Refer to Task 76-00-00, 3-1 (AMM).
- Comply with the general instructions about the cable insulation / continuity test procedure. Refer to Work
Card 20-02-01-602 (MTC).
- Comply with the general instructions about the ISO M and ISO MJ threads. Refer to
Work Card 20-02-05-101 (MTC).
- Comply with the general instructions about the safetying of assemblies. Refer to
Work Card 20-02-06-101 (MTC).
- Comply with the instructions about the safetying with plain pins. Refer to Work Card 20-02-06-401 (MTC).
- Comply with the general instructions about the safetying with lockwire. Refer to
Work Card 20-02-06-402 (MTC).
- Comply with the instructions about the safetying with cotter pins. Refer to Work Card 20-02-06-404 (MTC).
- Comply with the instructions about the use of cleaning products on individual parts and on aircraft. Refer to
Work Card 20-04-01-102 (MTC).
- Comply with the instructions about the cleaning of mechanical parts. Refer to
Work Card 20-04-01-401 (MTC).
- Comply with the technical instructions applicable when you do work on an aircraft electrical circuit and
power generating systems. Refer to Work Card 20-07-03-406 (MTC).
- Comply with the instructions about the installation / removal of cable ties. Refer to
Work Card 20-80-20-402 (MTC).
- Comply with the instructions about the protection of electrical wiring during maintenance operations. Refer
to Work Card 20-80-20-449 (MTC).
- Comply with the securing rules for electrical harnesses. Refer to Work Card 20-80-20-603 (MTC).
Unless specified differently, apply the standard tightening torque values. Refer to
Work Card 20-02-05-404 (MTC).
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECT DAMAGE (FOD). REFER TO
SPN 3703-P-00.
3.B.1. Preliminary steps
- Park the helicopter in a hangar. Refer to Work Card 20-07-02-201 (MTC).
- Install the applicable access equipment.
- Disconnect all the electrical power supplies.
- Remove the left center fairing. Refer to Task 53-51-00, 4-2 (AMM).
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas.
Revision 0  2023-04-17  Page 11/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
3.B.2. Procedure
3.B.2.a. Removal of the twist grip switch (Figure 1 and Figure 3)
WARNING
PUSH THE ROTOR BRAKE HANDLE (NOT SHOWN)
TO THE REAR TO PREVENT THE RISK OF
STARTING.
CAUTION
LOCK THE TWIST GRIP (e) BETWEEN IDLE
POSITION AND FLIGHT POSITION TO PREVENT
THE SPRING (g) FROM GETTING OUT OF ITS
FIXATIONS (DETAIL C).
- Disconnect the existing harness (not shown) from electrical connectors "87DEL-P1" (q) and 26C-P1
(Figure 3).
- Remove the transparent protective cover (a) and the switch support assembly (b) from the
collective stick (f) (DETAIL A - PRE MOD and DETAIL B). Refer to:
. Task 76-12-03, 4-1B (AMM) (for Arriel 2B1)
. Task 76-12-04, 4-1 (AMM) (for Arriel 2D).
- Discard:
. The transparent protective cover (a)
. The switch support assembly (b)
• The existing harness (not shown)
. The hardware (not shown).
- Keep the spring assembly (c) with the nut (d) and the spring (g) (DETAIL C).
3.B.2.b. Installation of the microswitch assembly of the engine power control (Figure 2 and Figure 3)
- Put the support plate assembly (1) at the end of the collective stick (f) (Figure 2, DETAIL A - POST MOD).
CAUTION
ADJUST THE WASHER (2) TO MAKE SURE THAT
THERE IS CLEARANCE (A) OF 0.1 MM MINIMUM
AND 0.3 MM MAXIMUM BETWEEN
WASHER (2) AND THE SUPPORT PLATE
ASSEMBLY (1) (Figure 2, SECTION A-A).
- Install the support plate assembly (1) (Figure 2, DETAIL A - POST MOD, DETAILS B and C and
SECTION A-A) with:
. The bolts (6) and (11)
. The nut (4)
. The washers (2) and (3)
. The spacer sleeve (7).
- Tighten the nut (4) to the standard torque value.
- Safety the nut (4) with the pin (5).
- Tighten the bolts (6) and (11) to the specified dry torque value.
- Safety the bolt (6) with lockwire (9).
- Install the bolt (8) and the screw (10).
- Tighten the bolt (8) and the screw (10) to the specified dry torque value.
- Safety the bolt (8) and the screw (10) with lockwire (9).
Revision O  2023-04-17  Page 12/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
- Install the clamp (14) around the collective handle wires (1b) (Figure 2, DETAIL B and Figure below) with:
. The bolts (15) and (16)
. The washers (3)
• The nuts (17).
- Do not torque the nut (17) at this step.
- Install the kept spring assembly (c) with the nuts (d) and (12) (Figure 2, DETAILS B and D). Refer to:
. The principle of Task 76-12-03, 4-2 (AMM) (for Arriel 2B1)
. The principle of Task 76-12-04, 4-2 (AMM) (for Arriel 2D).
- Do not torque the nut (12) at this step.
NOTE 1
The torque of the nuts (12) and (17) will be done in
paragraph 3.B.3.b.
- Route the harness (1a) as in its initial position with the cables tie (18) (Figure 3).
- Connect the harness (1a) to electrical connector "87DEL-P1" (q) and (1b) to the electrical
connector 26C-P1 (Figure 2, DETAILS A - POST MOD and D, Figure 3 and Figure below).
- Make sure that the harness (1b) is not in contact with the angle iron (h) (Figure below).
- 1b
1a
3.B.2.c. Check of the tightening torque and the clearance for helicopters that complied with revision O of this ALERT
SERVICE BULLETIN (Figure 4)
- Remove the split pin (5).
- Do the check of the tightening torque of the nut (4) (SECTION B-B):
. If the tightening torque of the nut (4) agrees with the standard torque value:
.. Do the check of the clearance (A) between the support plate assembly (1) and the washers (2):
... If there is a clearance of 0.1 mm minimum and 0.3 mm maximum, no other action is necessary.
... If there is not a clearance of 0.1 mm minimum and 0.3 mm maximum, comply with
paragraph 3.B.2.d. of this ALERT SERVICE BULLETIN.
Revision 0  2023-04-17  Page 13/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
3.B.2.d. Modification of the clearance between the support plate assembly and the washer (Figure 2)
WARNING
PUSH THE ROTOR BRAKE HANDLE (NOT SHOWN)
TO THE REAR TO PREVENT THE RISK OF
STARTING.
CAUTION
LOCK THE TWIST GRIP (e) BETWEEN IDLE
POSITION AND FLIGHT POSITION TO PREVENT
THE SPRING (g) FROM GETTING OUT OF ITS
- Disconnect the harness (1a) from electrical connector "87DEL-P1" (not shown) (DETAILS A - POST MOD
and C).
- Remove and keep (DETAIL D):
• The spring assembly (c)
. The nuts (d) and (12)
• The spring (g).
- Cut the lockwire.
- Remove the split pin (13).
- Remove and keep the support plate assembly (1) (DETAIL A - POST MOD, DETAIL B and SECTION A-A)
with:
. The bolts (6) and (11)
. The nut (4)
. The washers (2) and (3)
. The spacer sleeve (7).
- Install again the support plate assembly (1) of the engine power control. Refer to paragraph 3.B.2.b.
3.B.3. Tests
- Connect all the electrical power supplies again.
- Energize the helicopter electrical systems
3.B.3.a. Check of the twist grip contact switch (Figure 2)
Do the check of the twist grip contact switch. Refer to Task 76-12-03, 6-3 (AMM) (For Arriel 2B1) or
Task 76-12-04, 6-3 (AMM) (Arriel 2D).
3.B.3.b. Adjustment of spring assembly of the twist grip loads (Figure 2)
- Apply an initial tension to the spring (g) with the nuts (12) and (d).
- Do not tighten the nuts (12) and (d).
- Do the adjustment of the twist grip loads on the spring assembly (c). Refer to
Task 76-12-03, 5-2A or 76-12-03, 5-2B (AMM) (For Arriel 2B1) or 76-12-04, 5-2 (AMM) (Arriel 2D).
- Tighten the nut (12) and (17) to the specified dry torque value.
- Safety the spring assembly (c) with the pin (13).
- Safety the nut (12) and the nut (d) with lockwire (9).
- Safety the nut (12) and the bolt (11) with lockwire (9).
Revision 0  2023-04-17  Page 14/21
Revision 1  2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 15 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
3.B.4. Final steps
- Clean and apply the close-up procedure to the work areas and the helicopter. Refer to
Work Card 20-07-03-408 (MTC).
- Install the left center fairing. Refer to Task 53-51-00, 4-2 (AMM).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Put the rotor brake handle in the forward position (the brake is released).
- Remove the access equipment.
3.B.5. Work steps for non-installed equipment or parts
Discard the transparent protective cover reference 350A27-3250-03, the switch support assembly
reference 350A27-3244-01 and the wiring harness reference 350A67-0312-00AA identified in
paragraph 1.A.2. Refer to paragraph 3.B.2.a.
Do the modification of the pilot twist grip reference 350A27-5209-04 or 350A27-5209-0401 or
350A27-5209-06 identified in paragraph 1.A.2. Refer to paragraph 3.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 2
The recording of compliance with ALERT SERVICE
BULLETINS in the SB Insight tool does not replace the
recording in the helicopter documents.
ASB EC130-76A013
Tracking of modifications in the documentation:
Record the modification 074782 in the helicopter documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Refer to the Master Servicing Manual (MSM).
Refer to the Aircraft Maintenance Manual (AMM).
Revision 0  2023-04-17  Page 15/21
Revision 1  2023-10-25  This document is available on the Interet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 16 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
PRE MOD
B
WITHOUT PROTECTIVE COVER (a)
Back to paragraph 3.B.2.a.
Figure 1
Revision O  2023-04-17  Page 16/21
Revision 1 2023-10-25  This document is available on the Interet: www.airbushe  opters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 17 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
POST MOD
24 78 - 3363 in h
53K-A  20r kg
53K-B
35.40 - 44.25 in.lb
21288m  DOT Log
3 x2  18.59 - 24.78 in.lb
55.76 - 68.15 in.1b
SECTION
A-A
4 - 5 N.m.
35.40 - 44.25 in.Il
12
28-38Nm  26.55 - 35.40 in. Ib
24.78 - 33.63 in.lb
Back to paragraphs 3.B.2.b. / 3.B.2.d. / 3.B.3.b.
Figure 2
Revision 0  2023-04-17  Page 17/21
Revision 1  2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 18 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
PAGE KEPT BLANK DELIBERATELY
Revision 0 2023-04-17  Page 18/21
Revision 1  2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 19 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
1a
259
1b
- 18
a
Back to paragraphs 3.B.2.a. and 3.B.2.b.
Figure 3
Revision 0  2023-04-17  Page 19/21
Revision 1  2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US EC NoUScontent - FR EC NotListed

### Page 20 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2023-04-17  Page 20/21
Revision 1  2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 21 (OCR)

AIRBUS  HELICOPTERS
No. EC130-76A013
POST REV 0
SECTION
B-B
• A -
Back to paragraph 3.B.2.c.
Figure 4
Revision 0 2023-04-17  Page 21/21
Revision 1 2023-10-25  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
