# Airbus Helicopters Alert Service Bulletin EC130-80A005

Copy: Revision 1 ("Airbus ASB EC130-80A005 Rev 1"), 15 pages: PDF https://openairdocs.org/files/sha256/c1/92/c19258b664b901c73f38af7cd04d4a2ac1e949c445c01e4e76487f50bfbf507b; text https://openairdocs.org/service-documents/airbus-helicopters/ec130-80a005/file/c19258b664b9.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1108, the docket of AD 2025-18-13. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC130-80A005
- Latest revision known: EC130-80A005, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec130-80a005

## Text (15 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1108, the docket of AD 2025-18-13. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
Civil version: B4
ALERT SERVICE BULLETIN
SUBJECT: ENGINE STARTING
Improving twist grip operational logic
Corresponds to MOD 074263
For the attention of
Revision No.  Date of issue
Revision 0  2012-11-22
Revision 1  2013-08-13
Summary:
Revision 0:
Make microswitch "65K" operational in case of simultaneous failure of microswitches "53Ka" and "53Kb" on the
twist grip.
Revision 1:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to:
- modify the electrical connection between the switch "26K" and the relay "54K",
modify the test procedure,
- change the compliance deadline of this ALERT SERVICE BULLETIN,
- withdraw the cancellation of compliance with the instructions of ALERT SERVICE BULLETINS
No 05A009 when this ALERT SERVICE BULLETINS is complied with.
Compliance:
EUROCOPTER considers that application of instructions contained in this ALERT SERVICE BULLETIN is essential.
Revision 1 supersedes compliance with Revision 0 of this ALERT SERVICE BULLETIN.
Revision 0 2012-11-22  Page 1/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 2 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/Installed equipment
Helicopters equipped with ARRIEL 2B1 engine, post-MOD 073773 and pre-MOD 074263.
NOTE
Refer to the aircraft Certificate of Conformity (or RIC AMS-
Individual Inspection Log Book), the Equipment Log Cards
or the aircraft Log Book to identify the actual modification
status of the aircraft.
1.A.2. Non-installed equipment
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
In case of simultaneous failure of microswitches "53Ka" and "53Kb" located on the twist grip, switching over
from "IDLE" mode to "FLIGHT" mode can be degraded.
For this reason EUROCOPTER developed modification 074263 to, in all cases, recover engine "FLIGHT"
mode when the pilot operates the twist grip.
Revision 1:
Revision 1 of this ALERT SERVICE BULLETIN supersedes compliance with Revision O.
Revision 1 of this ALERT SERVICE BULLETIN consists in:
- modify the electrical connection between the switch "26K" and the relay "54K",
- modify the test procedure,
- change the compliance deadline of this ALERT SERVICE BULLETIN,
- withdraw the cancellation of compliance with the instructions of ALERT SERVICE BULLETINS
No 05A009 when this ALERT SERVICE BULLETINS is complied with.
Although the safety level of the aircraft is compliant with airworthiness regulations, the release of this
ALERT SERVICE BULLETIN ensures enhanced EUROCOPTER safety standards.
Revision 0 2012-11-22  Page 2/15
Revision 1  2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 3 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
1.D. DESCRIPTION
Revision 0:
This ALERT SERVICE BULLETIN consisted in:
- removing electrical connection between diode "66K" and relay "54K",
- directly connecting switch "26K" to relay "54K",
- modifying terminal connection on diode module "66K" of electrical wire originating from connector
"87DEL-J1".
Revision 1:
Operators who complied with Revision 0 of this ALERT SERVICE BULLETIN must modify diode module
"66K" terminal connection.
For operators who have not complied with Revision 0 of this ALERT SERVICE BULLETIN, Revision 1
consists in:
- removing electrical connection between diode "66K" and relay "54K",
- directly connecting switch "26K" to relay "54K".
1.E. COMPLIANCE
1.E.1. Compliance at the works
1.E.1.a. Helicopters/Installed equipment
Not applicable.
1.E. 1.b. Non-installed equipment
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment:
EUROCOPTER considers that application of instructions contained in this ALERT SERVICE BULLETIN is
essential.
For operators who have complied with Revision 0 of this ALERT SERVICE BULLETIN, comply with
paragraph 3, excluding paragraph 3.B.2.a.1. within 6 months following issue of Revision 1 of this ALERT
SERVICE BULLETIN at the date mentioned in page footer.
For operators who have not complied with Revision 0 of this ALERT SERVICE BULLETIN, comply with
paragraph 3, excluding paragraph 3.B.2.a.2. within 6 months following issue of Revision 1 of this ALERT
SERVICE BULLETIN at the date mentioned in page footer.
Non-installed equipment:
Not applicable.
Revision 0 2012-11-22  Page 3/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 4 (OCR)

— EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 074263 which was approved on May 3, 2013 by the
EASA for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on
November 20, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on
August 12, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for civil version
helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER
Qualification:
For compliance with this ALERT SERVICE BULLETIN, EUROCOPTER recommends the following
personnel qualifications:
Qualification: 1 Avionics Technician.
Time for the operations:
Times are given for reference, for a standard configuration.
Time for the operations: 12 hours approximately for the Avionics Technician.
Estimated helicopter grounding time:
1 day 1/2 approximately.
1.H. WEIGHT AND BALANCE
Weight: Negligible.
Moment: Negligible.
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
Revision 0 2012-11-22  Page 4/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 5 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN:
AMM: 24-00-00, 2-1: Electrical Power Supply on the Ground,
AMM: 24-00-00, 3-1 : General Safety Instructions - Electrical Power Supply System,
AMM: 76-12-03, 5-1b : Functional Tests - Twist Grip Indications (POST MOD 073773),
AMM: 80-11-00, 5-1a : Functional Tests - Starting Control PRE MOD 073587,
AMM: 80-11-00, 5-1b : Functional Tests - Starting Control POST MOD 073587,
PMV SECTION 8
MTC: 20.02.01.411: Cable binding methods.
MTC: 20.02.01.415: Installation of electrical cable bundles and optical fibers.
MTC: 20.02.01.418: Protection of electrical wiring during maintenance operations.
MTC: 20.07.02.201: Helicopter parked in a repair shop.
MTC: 20.07.03.406: Instructions applicable when working on an aircraft electrical circuit and power
MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair.
1.L. DOCUMENTS AFFECTED
Document to be updated:
This ALERT SERVICE BULLETIN will give rise to amendment of the following document by EUROCOPTER:
WDM.
This document will be circulated at a later date.
Document already updated:
Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not applicable.
Mixability:
Not applicable.
Revision 0 2012-11-22  Page 5/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 6 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning the price of modification kits and/or components or assistance, contact the
Eurocopter network or Customer Support Sales Department.
EUROCOPTER
Etablissement de Marignane
Direction VENTES et Relations Client (ECR)
13725 MARIGNANE CEDEX
FRANCE
NOTE
On the purchase order, please specify the mode of transport,
the destination and the serial numbers of the aircraft to be
modified.
NOTE
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT
Kits or components to be ordered for one helicopter or one assembly:
Key Word  Qty  New  Item  Former
PIN  P/N  Instruction
Cap  2  E0737B0816  1
Contact  1  M39029/101-553  2
Clamp, binding  10  E0043-7CO  3
Products to be ordered separately:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN.
The ingredients can be ordered separately, from the INTERTURBINE AVIATION LOGISTICS,
Website: http://www.interturbine.com
Telephone: +49.41.91.809.300
AOG: +49.41.91.809.444
Revision 0 2012-11-22  Page 6/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 7 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
Special tools:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and as per following table:
Key Word  Qty  Tooling P/N or equivalent  Item
Ohmmeter  Commercial  ZZ
2.D. A MATERIAL TO BE RETURNED
Not applicable.
Revision 0 2012-11-22  Page 7/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 8 (OCR)

— EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Comply with the electrical general instructions as per MTC Work Card 20.07.03.406 and AMM
Task 24-00-00, 3-1.
- Comply with instructions for grounding the aircraft as per MTC Work Card 20.07.02.201.
- Install electrical harnesses as per MTC Work Card 20.02.01.415.
- Carry out binding of electrical wiring as per MTC Work Card 20.02.01.411.
- Carry out protection of electrical wiring during modification embodiment as per MTC Work Card
20.02.01.418.
- Energize ground power generation of the aircraft as per AMM Task 24-00-00, 2-1.
3.B. OPERATIONAL PROCEDURE
3.B.1. Preliminary steps
- Cut off all electrical power sources.
- Implement suitable access means.
- Remove and/or open all cowlings, panels, doors and all equipment to allow adequate access to the various
work areas.
3.B.2. Procedures
3.B.2.a. Modification with direct connection between switch "26K" and relay "54K"
3.B.2.a.1. Revision 0 of this ALERT SERVICE BULLETIN not previously complied with
NOTE
For swaging swage-type contact (2) on the electrical wire,
refer to paragraph 4.A.
As per Figure 1
- To modify the wiring, use contact (2), caps (1) and clamps (3).
- Test electrical continuity of modified wires.
3.B.2.a.2. Revision 0 of this ALERT SERVICE BULLETIN previously complied with
As per Figure 2
- Modify terminal connection as per Figure 2
- Test electrical continuity of modified wires.
Revision 0 2012-11-22  Page 8/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 9 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
3.B.3. Tests
NOTE
For operators who do not have a light helicopter ground test
set, a ground run, along with a check as per Section 8 of the
PMV can be performed as replacement for the operational
test procedure of the start control.
- Perform the operational tests and indicating tests of the twist grip as per AMM Task 76-12-03, 5-1b.
- Check visual aspect and cleanliness as per MTC Work Card 20.07.03.408.
- Reconnect all electrical power sources.
- Set aircraft into test condition (test operations must not be altered, in particular by equipment removed in
paragraph 3.B.1.; install them again if required).
- Perform the operational tests as per AMM Task 80-11-00, 5-1a or 80-11-00, 5-1b.
3.B.4. Final steps
- Check visual aspect and cleanliness as per MTC Work Card 20.07.03.408.
- Re-install and/or close all the padding, coverings, panels and equipment removed and/or opened when
restoring the aircraft to flight conditions (§ 3.B.1.).
- Remove access means.
- Restore the helicopter to flight condition.
3.C. IDENTIFICATION
Identification of this document:
Record compliance with this ALERT SERVICE BULLETIN with the Revision number in the aircraft
documents.
Identification of modifications on documentation:
Record compliance with modification 074263 in the aircraft documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Not applicable.
Revision 0 2012-11-22  Page 9/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 10 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2012-11-22  Page 10/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 11 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
PRE MOD
OFF
IKK44F
SEE STARTING
1KK44E  ARRIEL 2B1 WIRING
ROST PANEL SELECT STARTING
BEA FLOOR RELAY
ORMAL
"TWT GRIP" RED  1KW6F
1 KW6F
ANST PANEL  WARNING PANEL
DIODE JUNCTION  SEE STARTING
ARRIEL 2B1 WRING**--  1KW37NE
OUTPUT CRAN FLYING
87DEL-J1
U/CA FLOOR
SEE 350A67031200
POST MOD
SEE STARTING
KK44F  1KK98NE
ARRIEL 2B1 WIRING
SELECT STARTING
CRET OHD  /CA FLOOR
1KW6E  KW6F
1KK44E
SEE STARTING
ARRIEL 2B1 WIRING  - 1KW37NE
OUTPUT CRAN FLYINGI
"TWT GRIP" RED  KW6F  87DEL-J1| P1
U/CA FLOOR
CAP PANEL  WARNING PANEL  COCKPIT  DIODE JUNCTION  635*  SEE 350A67031200
Figure 1
Revision 0  2012-11-22  Page 11/15
Revision 1  2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 12 (OCR)

- EUROCOPTER  AN EADS COMPANY  ASB No. EC130 - 80A005
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2012-11-22  Page 12/15
Revision 1  2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 13 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
POST REVISION 0
ON
OFF  SEE STARTING
ARRIEL 2B1 WIRING
SELECT STARTING  ICAFLOOR RELAY  1 KW6G  1:• SEE STA  TING ARRIEL 2B1
ORMAL
1KK44E
KW6E  1KW6F
SEE STARTING
1KW37NE  KW50E
ARRIEL 2B1 WIRING
OUTPUT CRAN FLYING
"TWT GRIP" RED  1KW6F  87DEL-J1 | P1
U/CA FLOOR
INST PANEL  WARNING PANEL  DIODE JUNCTION  635  SEE 350A67031200
POST REVISION 1
ON
KK98NE  **ARRIEL 2B1 WRING  SEE STARTING
SELECT STARTING  SAKA FLOOR RELAY
IKW6F
ЗК  • 1KK44E
ARRIEL 2B1 WIRING  SEE STARTING  1KW37NE-
TWT GRIP" RED  1 KW6F  87DEL-J1 | P1
U/CA FLOOR
AS PANEL  WARNING PANEL  635  SEE 350A67031200
ВСкРІТ  DIODE JUNCTION
Figure 2
Revision 0 2012-11-22  Page 13/15
Revision 1  2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 14 (OCR)

- EUROCOPTER  AN EADS COMPANY  ASB No. EC130 - 80A005
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2012-11-22  Page 14/15
Revision 1  2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

### Page 15 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC130 - 80A005
4. APPENDIX
4.A. SWAGING CONTACTS P/N M39029/**_***
Cable  Pliers M22520/ or equivalent  Ins./ext. tool M81969/
Contact P/N  wire  1-01  2-01  7-01  P/N  Ins.  Ext. color
gage  Pos.  Reg-  Pos.  Reg.  Pos.  Reg.  color
M39029/101-553  22  2.08  7.12  4  1.02  Red  White
Revision 0 2012-11-22  Page 15/15
Revision 1 2013-08-13  This document is available on the Internet: www.eurocopter.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
