# Airbus Helicopters Alert Service Bulletin EC135-04A-012

Copy: No revision named ("Airbus Helicopters ASB EC135-04A-012 Rev 0"), 7 pages: PDF https://openairdocs.org/files/sha256/3c/5e/3c5e97bb7564d9afb5363f6dd01e44b618397371af47079b57a8121e1d5813ab; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-04a012/file/3c5e97bb7564.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0113; AD 2021-11-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-04A-012
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-04a012

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-11-22](https://openairdocs.org/ad/2021-11-22.md), effective Jul 16, 2021: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-04a012/proposed.md).

## Text (7 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0113; AD 2021-11-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3
635 T1, 635 12+, 635 13, 635 P2+, 635 P3
ALERT SERVICE BULLETIN
SUBJECT:  AIRWORTHINESS LIMITATIONS - Tail Rotor
Life Limits for the Hub Body
ATA: 04
For the attention of
Revision No.  Date of issue
Revision O  2017-09-11
Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters Deutschland (AHD) prescribes the
incorporation of life limits for the hub body into the tail rotor hub (TRH) log card and into the
list of life-limited parts.
Compliance:
AHD considers that compliance with the instructions contained in this ASB is essential.
Revision 0, 2017-09-11  PAGE 1 of 7
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135, 11, 12, 12+, 13, P1, P2, P2+, P3, 635 11, 635 12+, 635 13, 635 P2+, 635 P3,
up to and including S/N 1249.
b) Hub body P/N L642A2003102
1.A.2 Non-installed equipment and parts
Hub body  P/N L642A2003102
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
Due to re-calculations for the newest EC135 versions, the life limit of the hub body
P/N L642A2003102 has been limited because of the increased forces. Therefore this
ASB introduces the new life limit and prescribes the incorporation of the hub body
P/N and life time in the TRH log card and the list of life-limited parts.
1.D  DESCRIPTION
Check the TRH log card and the list of life-limited parts. If necessary incorporate the
P/N and the life time of the hub body into the TRH log card. If necessary incorporate
the life limit of the hub body in the list of life-limited parts.
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Not affected.
PAGE 2 of 7  Revision 0, 2017-09-11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
a) Check the TRH log card and the list of life-limited parts by September 30, 2018 at
the latest to ensure that the hub body is recorded, refer to Section 3.B.1.
Non-installed equipment and parts:
a) Record the life time of the hub body into the TRH log card before a TRH is
installed to a helicopter, refer to Section 3.B.2.
b) Record the life time of the hub body into the TRH log card when the hub body is
installed to the TRH assembly.
1.F  APPROVAL
Approval of modification(s):
The information or instructions contained in this document refer to change no. 4350.
The technical content of this document is approved by EASA.
1.G  MANPOWER
No details.
1.H  WEIGHT AND BALANCE
No effect on weight and balance.
1.l  POWER CONSUMPTION
Not affected.
1.J  SOFTWARE UPGRADES/UPDATES
Not changed.
1.K  REFERENCES
None.
1.L  OTHER AFFECTED PUBLICATIONS
Publications already updated:
The new life limit of the hub body P/N L642A2003102 is already incorporated in the
MSM EC135, Section 04-00-00, 2-4.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2017-09-11  PAGE 3 of 7
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
None.
2.B  LOGISTIC INFORMATION
None.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
None.
2.D  MATERIAL TO BE RETURNED
None.
PAGE 4 of 7  Revision 0, 2017-09-11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Not applicable.
З.В  WORK STEPS
3.B.1 Check of the TRH log card and the list of life-limited parts
1. Check if the hub body P/N L642A2003102 is recorded in the TRH log card:
- If the hub body P/N L642A2003102 is not recorded in the TRH log card update
the TRH log card, refer to Section 3.B.2.
- If the calculated Fh of the hub body are above 27400 Fh the hub body must be
replaced before the next flight.
2. Check if the hub body P/N L642A2003102 is recorded in the list of life-limited
parts:
- If the hub body P/N L642A2003102 is not recorded in the list of life-limited
parts update the list of life-limited parts, refer to Section 3.B.3.
- If the hub body P/N L642A2003102 is recorded in the TRH log card and into
the list of life-limited parts proceed with Section 3.C.
3.В.2  Incorporation of the hub body into the TRH log card
NOTE  For facilitating tracking purposes a log card for the hub body can be
created by the operator, refer to MSM, 05-00-00, 6-6, Section
A.2.a.1.0.
EFFECTIVITY  The full history of the hub body is known.
Example 1  It is documented and confirmed that the part has not been replaced
since delivery of the helicopter.
The Fh of the helicopter can be applied.
Example 2  The history of the part can be traced to all helicopters were it was
previously installed and removed.
The respective Fh can be accumulated and applied.
Example 3  The part is stored and was never installed on a helicopter (new part).
O Fh can be applied.
Example 4  The part is stored and the history of the part can be traced to all
helicopters were it was previously installed and removed.
The respective Fh can be accumulated and applied.
Table 1: Examples and Calculations
Revision 0, 2017-09-11  PAGE 5 of 7
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
EFFECTIVITY The history of the hub body is partially known.
Example  The part was installed on previous helicopters and it is not clear
when the part was removed or installed on the current helicopter.
Calculation of the Fh:
NOTE The known history can be used and the unaccounted time
must be based on the factor of 1500 Fh per year (125 Fh per
month).
Start of the known date:  09/2012
Manufacturing date of the hub body: 05/2005
known history to the present:  2300 Fh
(difference in months between start of the known date and
manufacturing date of the hub body) × 125 Fh + known history to the
present = runtime
(difference in months between 09/2012 and 05/2005) × 125 Fh +
2300 Fh = runtime
88 months x 125 Fh + 2300 Fh = 13300 Fh
EFFECTIVITY  The history of the hub body is not known or can't be identified.
Example 1  Only the manufacturing date of the hub body is known.
Example 2  The manufacturing date of the hub body is not known:
- Contact your technical support representative to determine the
date of manufacturing of the affected hub body S/N.
Calculation of the Fh:
NOTE The life time must be based on the factor of 1500 Fh per
year (125 Fh per month).
Current date:  07/2017
Manufacturing date of the hub body: 05/2005
(difference in months between current date and manufacturing date
of the hub body) x 125 Fh = runtime
(difference in months between 07/2017 and 05/2005) x 125 Fh =
runtime
146 months x 125 Fh = 18250 Fh
Table 1: Examples and Calculations
PAGE 6 of 7  Revision 0, 2017-09-11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-04A-012
1. Enter the hub body P/N L642A2003102 into the log card of the TRH.
2. If necessary calculate the Fh for the hub body, refer to the specified formulas
(see Table 1).
3. Enter the Fh for the hub body into the TRH log card.
З.В.З  Introduction of a life limit
Include the life limit of the hub body into the list of life-limited parts.
Tail Rotor (64)
Part Name  Part Number  Life Limit  Remarks
Hub body  L642A2003102  27400 Fh
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Confirm accomplishment of this ASB by an entry in the historical record of the
helicopter and/or in the log card of the TRH.
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
Not affected.
APPENDIX
None.
Revision 0, 2017-09-11  PAGE 7 of 7
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
