# Eurocopter Alert Service Bulletin EC135-22A-015

Copy: Revision 1 ("ASB EC135-22A-015 Rev 1"), 10 pages: PDF https://openairdocs.org/files/sha256/20/90/20903d9e60342e153086cd8139c6ee1a36562d4209579ae3cc50efa0e4022795; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-22a015/file/20903d9e6034.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0577; AD 2015-12-09, 2015-12-09 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-22A-015
- Latest revision known: EC135-22A-015, Revision 1, dated January 28, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-22a015

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-12-09 R1](https://openairdocs.org/ad/2015-12-09-R1.md), effective Feb 25, 2016: Revision 1
- [AD 2015-12-09](https://openairdocs.org/ad/2015-12-09.md), effective Jul 23, 2015: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-22a015/proposed.md).

## Text (10 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0577; AD 2015-12-09, 2015-12-09 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER  EC135
AN EADS COMPANY
ALERT SERVICE BULLETIN
Auto Flight System - Longitudinal, Lateral and Yaw Actuator - Check
SEMA/control rod for correct attachment hardware
1. Planning Information
A. Effectivity
(1) Helicopters affected:  EC135/EC635, all models.
(2) Components affected:  Control rod  L221M1041101
L221M1041102
L221M1041104
Control rod with actuator L221M1046101
L221M1046102
YAW-actuator  L672M2005101
L672M2005102
L672M2005103
L672M2005104
Dual YAW-actuator  L221M1047101
L221M1047102
L221M1047103
L221M1047104
(3) Spare parts affected:  Not applicable.
B. Concurrent Requirements
Not applicable.
C. Reason
During the installation work on a helicopter, it has been detected that it was not possible to
establish attachment hardware on a threaded blind borehole between SEMA (Smart Electro
Mechanical Actuator) and the control rod without play. The reason for this loose attachment
hardware was an unfavourable adding of the tolerances of the attachment hardware
elements. The result of this was that the screw first pushed against the bottom of the
threaded blind borehole on the SEMA so that no clamping effect on the screw head could
Therefore, this Alert Service Bulletin prescribes the check of the affected SEMAs for
attachment hardware that is connected to the respective control rod without play and, if
necessary, the establishment of a connection that is free from play.
D. Description
Check attachment hardware between SEMAs and control rods. If necessary, loosen
attachment hardware and establish attachment hardware that is free from play.
This document is available on the internet: www.eurocopter.com/techpub
2008-05-13  EC135-22A-015
REVISION 1, 2013-01-28  PAGE 1 of 10

### Page 2 (OCR)

EUROCOPTER  EC135
AN EAS COMFANY
ALERT SERVICE BULLETIN
E. Compliance
(1) The check and the possibly required correction of the attachment hardware connection
i.a.w. Section 3 must be accomplished within the next 50 fh after receipt of this Alert
Service Bulletin.
(2) If SEMAs and control rods must be screwed together in future, it must be ensured that
the attachment hardware connections must be established without play i.a.w. Section 3
of this Alert Service Bulletin.
F. Approval
The technical content of this document is approved under the authority of DOA No.
EASA.21J.034.
G. Manpower
Approx. 2 man-hours for check of attachment hardware.
H. Weight and Balance
Not applicable.
Electrical Load Data
Not applicable.
J. Software Accomplishment Summary
Not applicable.
K. References
AMM EC135 and AMM EC135/635.
L. Other publications affected
The changes to IPC EC135, IPC EC635 will be incorporated with one of the next revisions.
M. Interchangeability of Parts
Not applicable.
EC135-22A-015  2008-05-13
PAGE 2 of 10  REVISION 1, 2013-01-28

### Page 3 (OCR)

EUROCOPTER  EC135
AN EADS COMPANY
ALERT SERVICE BULLETIN
2. Material Information
A. Material - Price and Availability
The possibly necessary washers EN2139-05016 and screws ISO4762-M5X16-A2-70 must
seperately ordered by ECD.
B. Support Information
Not applicable.
C. Material Necessary for Each Helicopter
Not applicable.
D. Material Necessary for Each Spare
Not applicable.
E. Reidentified Parts
Not applicable.
F. Special Tooling
Not applicable.
2008-05-13  EC135-22A-015
REVISION 1, 2013-01-28  PAGE 3 of 10

### Page 4 (OCR)

EUROCOPTER  EC135
AN EAS COMFANY
ALERT SERVICE BULLETIN
3. Accomplishment Instructions
List of contents:
A. Installation locations of the actuators.
B. Check of longitudinal actuator.
C. Check of lateral actuator.
D. Check of yaw actuator.
E. Conclusive work.
A.  Installation locations of the actuators:
(1) Figure 1 describes the installation locations of the actuators.
B. Longitudinal actuator (1, Figure 1):
(1) Remove front roof panelling i.a.w. AMM, 25-20-00, 4-1.
(2) Check attachment hardware between SEMA (3, Figure 2) and control rod (2):
(a) Check manually or with a suitable aid, whether the washers (4, 4), Detail A,
Figure 2) can be moved.
1 If the two washers (4, 4) cannot be moved, install front roof panelling i.a.w.
AMM, 25-20-00, 4-1.
2 If one or both washers (4, 4) can be moved, remove all four screws (5)
and discard. Store all four washers (4) for reuse and proceed as follows:
a Connect SEMA (3, Detail B, Figure 2) and control rod (2) with four new
screws (5), the old four washers (4) and two additional washers (6, 2).
Torque-tighten screws to 5-6 Nm.
b Install front roof panelling i.a.w. AMM, 25-20-00, 4-1.
C. Lateral actuator (2, Figure 1):
(1) Remove transmission fairings i.a.w. AMM, 71-11-00, 4-4.
(2) Check attachment hardware between SEMA (1, Figure 2) and control rod (2).
(a) Check manually or with a suitable aid, whether the washers (4, 4), Detail A,
Figure 2) can be moved.
1 If both washers (4,  1) cannot be moved, install transmission fairing i.a.w.
AMM, 71-11-00, 4-4.
2 If one or both washers (4, 1) can be moved, remove all four screws (5)
and discard. Store all four washers (4) for reuse and proceed as follows:
a  Connect SEMA (1, Detail B, Figure 2) and control rod (2) with four new
screws (5), the old four washers (4) and two additional washers (6, /2).
Torque-tighten screws (5) to 5-6 Nm.
b Install transmission fairing i.a.w. AMM, 71-11-00. 4-4.
EC135-22A-015  2008-05-13
PAGE 4 of 10  REVISION 1, 2013-01-28

### Page 5 (OCR)

EUROCOPTER  EC135
AN EADS COMPANY
ALERT SERVICE BULLETIN
D. Yaw actuator (3, Figure 1):
(1) If installed, remove Fenestron transmission cover i.a.w. AMM, 52-40-00, 4-6.
(2) Remove lower cover from Fenestron structure i.a.w. AMM, 52-40-00, 4-6.
(3) Check attachment hardware between SEMA (1, Figure 3 or 4) and control rod (2):
(a) Check manually or with a suitable aid, whether washers (3, 4, Detail A, Figure 3
or 4) can be moved.
1 If the two washers (3, 4) cannot be moved, install lower cover on Fenestron
structure i.a.w. AMM, 52-40-00, 4-6 and install Fenestron transmission cover
i.a.w. AMM, 52-40-00, 4-6.
2 If one or both washers (3, 1) can be moved, remove all four screws (5) and
discard. Store all four washers (3) for reuse and proceed as follows:
Connect SEMA (1, Detail B, Figure 3 or 4) and control rod (2) with four new
screws (5), the old four washers (3) and two additional washers (4, /2).
Torque-tighten screws (5) to 5-6 Nm.
b Install lower cover on Fenestron structure i.a.w. AMM, 52-40-00, 4-6.
c If removed,  install Fenestron transmission cover  i.a.w.
AMM, 52-40-00, 4-6.
E. Conclusive work:
(1) Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record
of the helicopter.
(2) If loose washers are detected, copy reply form sheet on page 10, fill out and send to
ECD customer support.
4. Appendix
Not applicable.
2008-05-13  EC135-22A-015
REVISION 1, 2013-01-28  PAGE 5 of 10

### Page 6 (OCR)

— EUROCOPTER  EC135
AN EAS COMPA
ALERT SERVICE BULLETIN
1 Longitudinal actuator
2 Lateral actuator
3 Yaw actuator
Installation Locations of Actuators
Figure 1
EC135-22A-015  2008-05-13
PAGE 6 of 10  REVISION 1, 2013-01-28

### Page 7 (OCR)

EUROCOPTER  EC135
ALERT SERVICE BULLETIN
2
FLIGHT DIRECTION
Detail A  4
5X4
2
Detail B
(with additional washers)
1,3
4/1  41
2
4X4
6/½
1 SEMA (lateral actuator)
2 Control rod
3 SEMA (longitudinal actuator)
4 Washer LN29932-05
5 Screw  ISO4762-M5X16-A2-70  6 /2  5X4
6 Washer EN2139-05016/2
5-6 Nm
Check, whether the two washers can be moved.
If necessary, install one addtional washer (6) on each of these two screws.
Longitudinal and Lateral Actuator
Figure 2
@
2008-05-13  EC135-22A-015
REVISION 1, 2013-01-28  PAGE 7 of 10

### Page 8 (OCR)

* EUROCOPTER  EC135
AN EAS COMFANY
ALERT SERVICE BULLETIN
FLIGHT DIRECTION
3 Detail A
5X4
2
Detail B
(with additional washers)
3 /1
- 3X4
5-6 Nm  5X4  4/2
SEMA (yaw actuator)
~  Control rod
3 Washer  LN29932-05
4 Washer  EN2139-05016
5 Screw  ISO4762-M5X16-A2-70
Check, whether the two washers can be moved.
2 If necessary, install one additional washer (4) on each of these two screws.
Yaw Actuator (with AFCS)
Figure 3
EC135-22A-015  2008-05-13
PAGE 8 of 10  REVISION 1, 2013-01-28

### Page 9 (OCR)

EUROCOPTER  EC135
AN EADS COMPANY
ALERT SERVICE BULLETIN
FLIGHT DIRECTION
Detail A
5X4
Detail B
(with additional washers)
3 1
4/2
5-6 Nm  5X4
• 3X4
4/2
1 SEMA (yaw actuator)
2 Control rod
3 Washer  LN29932-05
4 Washer  EN2139-05016
5 Screw  ISO4762-M5X16-A2-70
Check, whether the two washerrs can be moved.
2 If necessary, install one additional washer (4) on each of these two screws.
Yaw Actuator (without AFCS)
Figure 4
2008-05-13  EC135-22A-015
REVISION 1, 2013-01-28  PAGE 9 of 10

### Page 10 (OCR)

" EUROCOPTER  EC135
AN EAS COMFANY
ALERT SERVICE BULLETIN
Telefax
Reply form sheet for ASB EC135-22A-015 Check SEMA/control rod for correct
attachment hardware"
Please completely fill out reply form sheet and send to the given FAX No.
To
Eurocopter Deutschland GmbH
Customer Support
FAX 0049 906 714111
Address of operator:
Actuator affected
Helicopter  Longitudinal  Lateral actuator  Yaw actuator
S/N:  actuator
Disposition:
Date:  Signature:
Please copy page! Original page remains in the Alert Service Bulletin!
EC135-22A-015  2008-05-13
PAGE 10 of 10  REVISION 1, 2013-01-28

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
