# Airbus Helicopters Alert Service Bulletin EC135-63A-012

Copy: Revision 5 ("U.S. DOT/FAA - Eurocopter ASB EC135-63A-012 Rev 5"), 31 pages: PDF https://openairdocs.org/files/sha256/65/6e/656e6173c62cd29482f1f675f23f86c781b533d1d1902460b7609510de8b6290; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-63a012/file/656e6173c62c.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0554; AD 2014-05-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-63A-012
- Latest revision known: EC135-63A-012, Revision 5, dated September 6, 2011 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-63a012

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-05-01](https://openairdocs.org/ad/2014-05-01.md), effective Apr 14, 2014: Revision 5

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-63a012/proposed.md), [9 difficulty reports](https://openairdocs.org/service-documents/airbus-helicopters/ec135-63a012/reports.md).

## Text (31 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0554; AD 2014-05-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER  EC135
ALERT SERVICE BULLETIN
CHANGE INSTRUCTION NO. 5 FOR EC135-63A-012
Date:  First issue:  2007-08-08
Revision 01: 2007-12-14
Revision 02: 2008-03-31
Revision 03: 2008-06-16
Revision 04: 2009-04-27
Revision 05: 2011-09-06
Please replace Revision 04 of Alert Service Bulletin EC135-63A-012 with Revision 05.
With Revision 05 no further measures are introduced. The formerly required oil analysis feedback
to ECD will no longer be necessary. The oil analysis form sheets have been changed accordingly.
It is no longer required that the laboratory is approved by ECD, but we recommend to choose a
laboratory which is approved by ECD. The email address "maintransmission@eurocopter.com"
will be deleted.
In order to provide a better overview a table has been introduced on page 2 and the entire Alert
Service Bulletin has been divided into four parts:
Part 1: Taking of the Oil Sample
Part 2: Evaluation of the oil analysis
Part 3: Measures after chip detector indication
Part 4: Inspection of the toothing on the drive stages
This division shall make the assignment of the individual work steps clearer, e.g. all Sections
designated with "Part 1" in the Alert Service Bulletin are associated with taking the oil sample.
Starting with the "Accomplishment", the "Accomplishment Instructions", the associated Figures
up to the "Confirmation" of the accomplished work steps.
2011-09-06  PAGE 1 of 1

### Page 2

(No text on this page.)

### Page 3 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
Main Rotor Drive - Main Transmission - Introduction of an oil analysis
and adaption of measures after indication of chip detector
1. Planning Information
A. Effectivity
(1) Helicopters affected:
(2) Components affected:
(3) Spare parts affected:
EC135/EC635, all models.
Main transmission P/N 4649 010 003, 4649 010 005,
4649 010 006, 4649 010 006X, 4649 010 008,
4649 010 008X, 4649 001 007, 4649 010 010 and
4649 010 013.
Not applicable.
B. Concurrent Requirements
Not applicable.
C. Reason
Following several chip indications, several main transmissions were returned to the
manufacturer for repair. Within the framework of the inspection of these main transmissions,
a partial tooth rupture was detected after removal a drive pinion. This tooth rupture was a
follow-up damage caused by excessive wear.
In order to detect wear in time, with this Alert Service Bulletin an oil analysis is introduced
for monitoring the condition and the inspection measures following a chip indication are
adapted.
D. Description
Perform scheduled oil analyses on the main transmission and accomplish given procedures.
Accomplish the given measures following a chip detector indication.
This document is available on the internet: www.eurocopter.com/techpub
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 1 of 29

### Page 4 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
E. Compliance
NOTE  The following table lists an overview of the specified measures. Accomplishment of the measures
(Part 1 to Part 4) and the determined stage / water content must be confirmed by an entry in the
log card. Please find a detailed list of the measures subsequent to this Table.
Part 1  Take oil sample:
- every 100 th (+10 th tolerance), at least once a year
- if required by the analysis i.a.w. Part 3
Note: 25 fh after Part 1 the oil analysis must be accomplished i.a.w. Part 2.
Part 2  Analyze and evaluate oil sample:
- within 25 fh after the oil sample has been taken
Viscosity too low (within 25 th  Remove oil filter element and inspect it (Part 3)
after oil analysis)
Inspect toothing (Part 4)
Accomplish oil change
Water content  Perform oil change within 10 fh after the oil analysis has been accomplished
between 0.1 % and 0.5 %
Water content  Accomplish oil change before the next flight
more than 0.5 %
After the third entry "water content more than 0.5 %" has been made, inspect
toothing within 50 fh after the oil analysis has been accomplished (Part 4).
Stage I  No further measures required
Stage II (within 25 fh after the oil  Remove oil filter element and inspect it (Part 3)
analysis)
Inspect toothing (Part 4)
Accomplish oil change
Stage III (within 10 fh after the oil  Remove oil filter element and inspect it (Part 3)
analysis)
Inspect toothing (Part 4)
Accomplish oil change
Part 3  Analyze and evaluate chips:
- when chip detector is indicated
Stage A  Remove oil filter element and analyze chips (Stage A - D).
After stage A has been reported twice: Inspect toothing within 10 fh (Part 4).
Stage B  Remove oil filter element and analyze chips (Stage A - D).
Inspect toothing within 10 fh (Part 4).
Perform ground run and then re-inspect the chip detector.
Stage C  Remove oil filter element and analyze chips (Stage A - D).
Inspect toothing before the next flight (Part 4).
Take an oil sample and analyze it (Part 1 and 2).
After stage C has been reported twice: Accomplish the measures of stage D within
50 fh.
Stage D  Take an oil sample (Part 1)
Collect chips for analysis.
Send main transmission with chips and oil sample / oil analysis to the manufacturer for
repair before the next flight.
Part 4  Inspect toothing on the drive stages:
- if required by the analysis i.a.w. Part 2 or Part 3
Tooth image i.a.w. Figure 11, 12,  admissible wear, no replacement required
green area
Tooth image i.a.w. Figure 11, 12,  not admissible wear, remove main transmission and send it to the manufacturer.
red area
EC135-63A-012  2007-08-08
PAGE 2 of 29  REVISION 05, 2011-09-06

### Page 5 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
Part 1: Taking of the Oil Sample:
EFFECTIVITY  EC135/EC635 up to and including S/N 0504.
1. If a previous revision of this Alert Service Bulletin has not been carried out the first oil
sample must be taken i.a.w. Section 3, Part 1 within 100 th or one year from the last oil
change or at the next oil change (see Note).
EFFECTIVITY All EC135/EC635.
1. The first oil sample must be taken within 100 fh after the last oil change (see Note) has
been done.
2. After the first oil sample has been taken other oil samples must be taken i.a.w. Section
3, Part 1 in regular intervals within 100 th (see Note), but at least once a year. On
accomplishment of the oil change the oil analysis is set back to O fh and then starts over
NOTE  For the taking of the oil sample a tolerance of 10% (90 th to 110 fh) applies.
If the oil sample is carried out at same time as oil change the oil sample
is to be carried out prior to the oil change.
Part 2: Evaluate the oil analysis and start measures:
EFFECTIVITY All EC135/EC635.
The oil sample must be analyzed i.a.w. Section 3, Part 2 within 25 th after the oil sample
has been taken. Prior to evaluation of the oil analysis results the helicopter may be
operated without restrictions.
Part 3: Measures after chip detector indication:
EFFECTIVITY All EC135/EC635.
If the chip detector indication illuminates the chip detector must be checked i.a.w.
Section 3, Part 3 of this Alert Service Bulletin and an entry in the log card of the main
transmission must be made. This Alert Service Bulletin takes precendence over the
AMM task until such time as the Alert Service Bulletin is incorporated into the AMM.
EFFECTIVITY  All EC135/EC635 with a main transmission TT, TSO, TSR that has more
than 300 fh.
1.  If an issue of this Alert Service Bulletin has already been accomplished before Revision
04 was issued, the log card of the main transmission must be checked immediately for
entries regarding to chip indications. If, within the last 300 fh, stage A has been entered
twice or stage B has been entered once in the log card, the toothing must be inspected
i.a.w. Section 3, Part 4 within 10 fh.
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 3 of 29

### Page 6 (OCR)

→ EUROCOPTER
EC135
ALERT SERVICE BULLETIN
2. In future, the toothing must be inspected i.a.w. Section 3, Part 4 within 10 fh after the
second chip detector indication i.a.w stage A or after the first chip detector indication
i.a.w stage B. Make an entry in the log card of the main transmission.
3.  In future, the measures i.a.w. stage D must be accomplished within 50 th after the
second chip indication i.a.w. stage C has occurred.
Part 4: Inspect toothing on the drive stages:
EFFECTIVITY All EC135/EC635.
The toothing must be inspected i.a.w. Section 3, Part 4 whenever the measures after
the chip detection or the measures after the oil analysis require the inspection.
2. If pitting or spalling i.a.w Figure 11 or 12 is detected, during accomplishment of the
inspection i.a.w Section 3, Part 4, the transmission must be replaced before the next
flight.
F. Approval
The technical content of this document is approved under the authority of
DOA No. EASA.21J.034.
G. Manpower
Not applicable.
H. Weight and Balance
Not applicable.
Electrical Load Data
Not applicable.
J. Software Accomplishment Summary
Not applicable.
K. References
- AMM EC135
- AMM EC135/635
L. Other publications affected
The changes to AMM/MSM EC135 and AMM/MSM EC135/635 which are required as a
result of this Alert Service Bulletin will be incorporated with one of the next revisions.
EC135-63A-012  2007-08-08
PAGE 4 of 29  REVISION 05, 2011-09-06

### Page 7 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
M. Interchangeability of Parts
Not applicable.
2. Material Information
A. Material - Price and Availability
Information on cost and availability of required retrofit kit SB-135-63A-012-2C will be
provided by ECD, Dept. Spares Order Administration on request.
B. Support Information
Not applicable.
C. Material Necessary for Each Helicopter
Retrofit kit SB-135-63A-012-2C. The material kit is needed for the inspection i.a.w. Section
3, Part 4.
No.  New P/N  Keyword  Old P/N  Qty  Remark
0634313288  O-ring  0634313288  2
0634316171  O-ring  0634316171  2
Remark:
A = New, included in kit.
D. Material Necessary for Each Spare
Not applicable.
E. Reidentified Parts
Not applicable.
F. Special Tooling
- Testing probe with a ball diameter at the tip of 0.3 - 0.5 mm (dental tool, WHO
parodontometer, e.g. parodontometer P-WHO 11,5, )
- Guide bolt (made from a screw M6 with a shank length of 80 mm, see Figure 15)
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 5 of 29

### Page 8 (OCR)

→ EUROCOPTER
EC135
ALERT SERVICE BULLETIN
3. Accomplishment instructions
Part 1: Taking of the Oil Sample:
A. Preconditions:
- Do not refill new oil immediately before the oil analysis.
- The oil samples may not be taken directly from the transmission bottom or from the
filter housing.
- Container and sample syringe must be free of any deposits.
- Protective caps of the sample syringe and the container may only be removed
immediately before the sample is taken and must be re-installed immediately after the
sample has been taken.
- The oil must have reached its normal operating temperature (approx. 50 to 70
degrees centigrade) and well mixed. Therefore, the oil sample should be taken within
10 minutes after engine shutdown.
B. Take oil sample:
(1) Open oil filler neck (Figure 1) and remove oil filter element.
(2) Take oil sample by means of a syringe (Figure 1) and fill approx. 50 ml into the provided
bottle.
(3)  It is important that the complete data is given and sent together with the oil sample for
analysis:
- S/N, TT (Total Time) and TSO (Time Since Overhaul) of the main transmission
- Operating time of the oil in th
- Oil type
- S/N and TT of the helicopter
- Operator
- Date
C. If necessary, refill oil i.a.w. AMM, 63-21-00, 3-2.
D. Have oil analysis accomplished in a laboratory. It is recommended to choose a laboratory
that is approved by EC (see http:/www.eurocoptersea.com.sg/dlctr/laboratories.html).
Determine proportions of iron (Fe) contained in the oil. Determine viscosity at 100°C i.a.w.
DIN 51562 and water content in weight-%.
EC135-63A-012  2007-08-08
PAGE 6 of 29  REVISION 05, 2011-09-06

### Page 9 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
Part 2: Evaluate oil analysis:
A. Document oil analysis:
Using Figure 2 (oil i.a.w. MIL-PRF-23699) or Figure 3 (oil i.a.w. ZFN-L-3001) and enter
values as shown in example (Figure 4). Carry out procedures according to determined stage
( to III) and to viscosity and water content values:
NOTE  If SB EC135-63-011 (retrofit to a more efficient lubricating oil) has been
accomplished recently, the increased cleansing property of the new oil
may possibly falsify the results of the oil analysis. This increased cleansing
property of the oil may separate deposits from the housing and keep them
floating. This can cause increased analysis values and also lead to more
deposits on the chip detector. Contact ECD customer support if any
clarification is required for oil sample results.
B. Viscosity:
(1) The standard value for lubricating oil i.a.w. MIL-PRF-23699 is 4.9 to 5.4 mms. If the
value is below 4.9 mms, accomplish measures i.a.w. stage I.
(2) The standard value for lubricating oil i.a.w. ZFN-L-3001 is at least 7 mms. If the
measured value is less than the given value, accomplish measures i.a.w. stage II.
C. Water content:
The limiting value for the water content is 0.1%. If this value is exceeded:
(1) If the water content is between 0.1 and 0.5%, accomplish an oil change within the next
10 fh.
(2) If the water content is greater than 0.5%, accomplish an oil change before the next
flight.
(3) Enter process in the log card of the main transmission.
- After the third entry in the log card has been made, the measures i.a.w. stage II
must be accomplished within 50 fh.
D. Stage I:
No further measures required.
E. Stage II:
The following measures are required within 25 fh:
(1) Remove oil filter element i.a.w. AMM, 63-21-00, 4-5 and inspect i.a.w. Section 3, Part 3
of this Alert Service Bulletin. Clean oil filter element i.a.w. AMM, 63-21-00, 7-2 and
install.
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 7 of 29

### Page 10 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
(2) Have toothing inspected i.a.w. Section 3, Part 4. During this inspection the transmission
remains on the helicopter. If there is a chip detector indication within these 25 fh inspect
the chip detector i.a.w. Section 3, Part 3.
(3) Accomplish oil change.
F.  Stage III:
The following measures are required within 10 th:
(1) Remove oil filter element i.a.w. AMM, 63-21-00, 4-5 and inspect i.a.w. Section 3, Part 3
of this Alert Service Bulletin. Clean oil filter element i.a.w. AMM, 63-21-00, 7-2 and
install.
(2) Have toothing inspected i.a.w. Section 3, Part 4.
(3) Accomplish oil change.
Part 3: Measures after chip detector indication:
NOTE  The findings and measures described for the chip detector (1, Figure 6) are also
effective for particles that are found in the oil filter element and the filter of the
chip detector housing (2).
A.  Remove chip detector i.a.w. AMM, 63-40-00, 4-1 and analyze deposits on the chip detector
i.a.w. the following table and start measures:
Deposits i.a.w. Figure 5, stage A:
Findings  Possible  Measures
causes
Slight abrasion  Normal  (a) Clean chip detector and install.
wear
(b) Remove oil filter element i.a.w. AMM, 63-21-00,
4-5 and check for deposits and chips. Analyze
deposits. If no chips are present, clean oil filter
element i.a.w. AMM, 63-21-00, 7-2 and install.
(c) Enter the chip indication in the log card of the
main transmission.
(d) On main transmissions with TT, TSO, TSR
more than 300 th: Inspect toothing i.a.w.
Section 3, Part 4 within 10 fh, after the second
chip indication has been indicated.
EC135-63A-012  2007-08-08
PAGE 8 of 29  REVISION 05, 2011-09-06

### Page 11 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
Deposits i.a.w. Figure 5, stage B:
Findings  Possible  Measures
causes
Increased slight  Normal  (a) Accomplish measures (a) to (c) i.a.w.
abrasion, no chips  wear or first  stage A.
signs of a
damaged  (b) On main transmissions with TT, TSO, TSR
more than 300 fh: Inspect toothing i.a.w.
transmission
Section 3, Part 4 within 10 fh.
(c) Accomplish ground run (duration 15 min, at power
setting IDLE) and then reinspect chip detector.
Deposits i.a.w. Figure 5, stage C:
Findings  Possible  Measures
causes
Some chips,  Damaged  (a) Accomplish measures (a) to (c) i.a.w.
triangular to  gear wheel  stage A.
trapezoidal. One
side is smooth  (b) Inspect toothing i.a.w. Section 3, Part 4 before
with still  the next flight.
recognizable  (c) Additional take an oil sample and accomplish
working structure  oil analysis (Section 3, Part 1 and 2).
or scoring, the
other side with  (d)  After the second chip indication i.a.w. stage C
tracture.  has occurred the measures i.a.w. stage D must
be accomplished no later than within 50 th.
Deposits i.a.w. Figure 5, stage D:
Findings  Possible  Measures
causes
Several very thin  Damage to  (a) Take oil sample.
chips which shine  the bearing  (b) Collect chips for analysis.
bright on one side
in increased  (c) Send main transmission with chips and oil sample
abrasion.  / oil analysis to the manufacturer for repair before
the next flight.
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 9 of 29

### Page 12 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
Part 4: Inspect toothing on the drive stages:
A. Remove drive shaft i.a.w. AMM, 63-11-00, 4-1.
B. Remove drive stage:
CAUTION  DO NOT INTERCHANGE COMPONENTS OF THE LH AND RH
DRIVE STAGE. THEREFORE, ONLY ONE DRIVE SHAFT AT A
TIME MAY BE REMOVED AND INSPECTED. BEFORE THE
SECOND DRIVE STAGE IS INSPECTED, THE FIRST DRIVE
STAGE MUST BE REINSTALLED.
(1) If necessary, remove dirt and deposits from the entire circumference of the drive stage.
To do so, use a lint-free cloth or a piece of paper. Do not use cleaning solvents.
(2)  Before removal, mark the position of shim (3, Figure 7), bearing (2) and cover (1)
against each other (1, Figure 8). Mark bearing housing with either LH or RH (2).
(3) Remove oil nozzle (3, Figure 8).
(4) Using hot air blower (4, Figure 8), heat housing to a maximum of 60 degrees centigrade.
NOTE  Wear lint-free gloves for the removal of the drive stage.
(5) Remove six of the seven hexagon head screws (1, Figure 9). In order to secure the drive
stage, the uppermost hexagon head screw (2) remains tightened.
(6)  Hold drive stage with one hand and remove the remaining hexagon head screw 2,
Figure 9).
CAUTION  WHEN REMOVING THE DRIVE STAGE, IT MUST BE ENSURED THAT
THE DRIVE STAGE DOES NOT SLIP OUT, THAT THE INDIVIDUAL
PARTS - ESPECIALLY SHIM, BEARING AND COVER - ARE REMOVED
TOGETHER AND THAT THE SHAFT SEAL IN THE COVER (1, FIGURE
7) IS NOT TILTED OR TWISTED.
(7) Pull out drive stage (3, Figure 9).
(8) Protect opening of housing from contamination.
(9) Put drive stage onto flange of free wheel shaft (5, Figure 7).
(10) Secure drive stage components with two hexagon head screws (6), washers (7) and
nuts (8).
(11) In order to remove the residual oil (approx. 0.1 liters), turn drive stage by 180 degrees
and drain oil in a container. To do so, hold drive stage in this position.
EC135-63A-012  2007-08-08
PAGE 10 of 29  REVISION 05, 2011-09-06

### Page 13 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
(12) Position drive stage as shown in Figure 10.
CAUTION  CLEANING SOLVENT MUST NOT GET INTO THE TRANSMISSION OIL.
(13) Clean toothing on the drive stage and on the bevel gear (2, Figure 10) of the
intermediate shaft using a lint-free cloth. If necessary, dry cleaning solvent CM 202 can
be used.
C. Visual inspection of the toothing (23 teeth on the drive pinion, 80 teeth on the bevel gear of
the intermediate shaft) for damage:
NOTE  Factory-applied lacquer (silver or blue, Figure 13) serves for the setting
of the contact pattern and does not count as damage. Figure 11 shows a
possible kind of damage for the drive pinion and Figure 12 shows the same
for the bevel gear. Pinion and bevel gear do not have the same contact
pattern nor do they have the same position of the contact line.
(1) Using a permanent pen, mark the first tooth to be inspected on the outer race and
inspect tooth in direction of sight (Figure 11, 12). Then, turn gear wheel until all teeth
have been inspected.
(2) Only the tooth images shown in the LH green frame are admissible (Figure 11, 12).
(3) The tooth images shown in the RH red frame (Figure 11, 12) are not admissible. These
main transmissions must be removed and sent to the manufacturer. Please send a
completed copy of the attached reply form sheet together with the main transmission.
(4) In (1, Figure 14) a pinion with a contact line is shown. This area and also other areas
which are conspicuous during the visual inspection, must be manually traced with a test
probe (2). The test probe must smoothly move over the surface without getting caught.
If the test probe gets caught, the respective area must be inspected with a magnifying
glass (8- to 10-fold magnification). If pitting (Figure 11, 12) or one single spalling is
detected, the transmission must not be used any longer. Transmissions with such a
finding must be removed and sent to the manufacturer.
D. Install drive stage:
(1) Replace O-ring (4, Figure 7) on drive stage.
(2) Install two guide bolts (1, Figure 15) on the transmission housing.
(3) Press back rollers in the pilot bearing (2, Figure 15). If necessary, use grease (CM101).
(4) Remove deposits from flange area on the main transmission.
(5)  Using a hot air blower, heat transmission housing to a maximum of 60 degrees
centigrade.
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 11 of 29

### Page 14 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
(6) Remove locking screws (6, Figure 7), washers (7) and nuts (8).
CAUTION  PAY ATTENTION TO MARKINGS FOR THE INSTALLATION POSITION.
(7) Carefully insert drive stage into transmission housing and secure with a hexagon head
screw.
(8) Screw in the remaining hexagon head screws and torque-tighten crosswise to 8 to 10
Nm.
(9) Using the torque wrench, check again tightening torque of all screws.
(10) Replace O-ring on the oil nozzle (3, Figure 8). Insert oil nozzle and torque-tighten
screw to 4.5 to 5.5 Nm.
E. Install drive shaft i.a.w. AMM, 63-11-00, 4-1.
F. Perform ground run of engines for 5 minutes at power setting GROUND IDLE. To do so,
observe procedures and operational limits i.a.w. the model-related flight manual (FLM).
G. Accomplish a visual inspection of the main transmission in the area of the drive stages for
oil leakage.
Confirmation of accomplishment:
H. Confirm accomplishment of this Alert Service Bulletin by an entry in the log card of the main
transmission:
Part 1:
"Oil sample taken at xxx fh".
Part 2:
"Oil analysis evaluated at xxx fh, stage X determined, viscosity xx, water content xx"
Part 3:
"Chip detector indication noted at xxx fh, stage X"
Part 4:
"Toothing inspected at xxx fh" no damage / micropitting (gray staining)" or "damage / pitting
/ rupture on tooth flank"
4. Appendix
If the transmission is removed, return the inspection report (page 28, 29) together with the note
of malfunction / reply form sheet (see also SI EC135-069).
EC135-63A-012  2007-08-08
PAGE 12 of 29  REVISION 05, 2011-09-06

### Page 15 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
1 Oil filler neck
2 Oil sample syringe
Taking of the Oil Sample
Figure 1
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 13 of 29

### Page 16 (OCR)

EUROCOPTER
EC135
ALERT SERVICE BULLETIN
This form is also available on the internet:
http://www.eurocoptersea.com -> Download Center
Oil analysis for lubricating oil CM103 (MIL-PRF-23699)
Helicopter S/N:  Main transmission S/N:
Helicopter TT:  Main transmission TT:1)  Main transmission
1) at the last oil change
Type:  EC135  EC635  T2  _ T2+  | CPDS  CDS
Customer:  Operator:
Contact (Name):  Phone:  Fax:  email
ASB EC135-63A-010 accomplished:
Date:
Main transmission TT:  Main transmission TSO:
1 Not critical, no measures required.
measures i.a.w. stage I| within 25 th required.
III measures i.a.w. stage III within 10 fh required
Fe
(ppm) A  Fe  2
60-
50  Oil sample taken:
40  Date:  Fh oil:  Water (%)  Viscosity  Fe (ppm)
1)
30  2)
3)
20
4)
10  5)
6)
100 200 300 400 500 600 Oil (fh)
Oil change  Oil change
(new oll)
Please make a copy of this page! The original of this page is to remain in the ASB!
Evaluation of the Oil Analysis
Figure 2
EC135-63A-012  2007-08-08
PAGE 14 of 29  REVISION 05, 2011-09-06

### Page 17 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
This form is also available on the internet:
http://www.eurocoptersea.com -> Download Center
Oil analysis for lubricating oil i.a.w. CM1001 (ZFNL-3001)
Helicopter S/N:  Main transmission S/N:
Helicopter TT:  Main transmission TT:1)  Main transmission TSO: 1)
" at the last oil change
Type: I  — EC135  EC635  • P2  1P2+  .T1  T2  JT2+  _ CPDS  — CDS
Customer:  Operator:
Contact (Name):  Phone:  Fax:  email
ASB EC135-63A-010 accomplished:
Date:
Main transmission TT:  Main transmission TSO
SB EC135-63-011 accomplished:  Not critical, no measures required.
Date:  measures i.a.w. stage Il within 25 fh required.
III measures i.a.w. stage III within 10 fh required
Main transmission TT:  Main transmission TSO
(ppm)
2  85
80-
Fe
70
Oil sample taken:
60  Date:  Fh oil:  Water (%)  Viscosity  Fe (ppm)
1)
50  2)
45  3)
40
4)
30 -  5)
20
10
100 200 300 400 500 600 Oil (fh)
Oil change (new  Oil change
oil)
Please make a copy of this page! The original of this page is to remain in the ASB!
Evaluation of the Oil Analysis
Figure 3
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 15 of 29

### Page 18 (OCR)

EUROCOPTER
EC135
ALERT SERVICE BULLETIN
Oil analysis for lubricating oil i.a.w. CM1001 (ZFNL-3001)
Helicopter S/N:  XXXX  Main transmission S/NXXXX
Helicopter TT:  XXXX  Main transmission TT:1)  1) at the last oil change  Main transmiss 189'2 410
Type: EC135  EC635  _ P1  → P2  1P2+  _ T1 XT2  _ T2+  X CPDS  _ CDS
Customer:  Operator:
Contact (Name):  Phone:  Fax:  email
ASB EC135-63A-010 accomplished:
Date:  01.06.2006
Main transmission 11210 Main transmission 1591210
SB EC135-63-011 accomplished:
Date:  20.11.2006
Main transmission 79. 840 Main transmission TSø840
Not critical, no measures required.
II measures i.a.w. stage Il within 25 fh required.
measures i.a.w. stage III within 10 fh required
Measures i.a.w.  stage I  2
80-  Fe  accomplished
70
• sample taken:
60-  Date:  Fh oil:  Water (%)  Viscosity  Fe (ppm)
1)  XxXx  100  0,07  7,5
50-  2)  XXxx  214  0104  7,4  12
40*  45  3)  IXXXX  318  0,02  7174  15
4)  XXXx  423  0.02  7,3  24
30  5)  XXXX  505  0103  7,2  34
20  6)  XXXX 615 0,06 7,2 52
10
100 200 300 400 500 600 FhÖl
Oil change  Oil change
(new oil)
Example of a Filled-Out Sheet for the Oil Analysis
Figure 4
EC135-63A-012  2007-08-08
PAGE 16 of 29  REVISION 05, 2011-09-06

### Page 19 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
Stage A  Stage B
3
Stage C  Stage D
Possible Deposits on Chip Detector
Figure 5
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 17 of 29

### Page 20 (OCR)

- EUROCOPTER  EC135
ALERT SERVICE BULLETIN
View A
FLIGHT DIRECTION
10.2 - 13.8 Nm
(35-53 Ib-in)
1 Chip detector
2 Chip detector housing
Mark with safety lacquer (CM 680)
Installation of Chip Detector
Figure 6
EC135-63A-012  2007-08-08
PAGE 18 of 29  REVISION 05, 2011-09-06

### Page 21 (OCR)

EUROCOPTER
EC135
ALERT SERVICE BULLETIN
4
5  6x2
7x4  8 x2
1 Cover
2 Bearing
3 Shim
4 O-ring
5 Flange of free wheel shaft
6 screw
7 Washer
8 Nut
Drive Stage Components
Figure 7
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 19 of 29

### Page 22 (OCR)

→ EUROCOPTER
AN EMUS CO  EC135
ALERT SERVICE BULLETIN
(1) Mark installation
position
RH  (2) Mark with
LH or RH
(3) Remove oil
nozzle
(4) Heat with hot
air blower
Preparations for Drive Stage Removal
Figure 8
EC135-63A-012  2007-08-08
PAGE 20 of 29  REVISION 05, 2011-09-06

### Page 23 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
(1) Remove six of the seven
screws
(2) Leave uppermost hexagon head screw
tightened for securing purposes
(3) Remove drive stage
Remove Drive Stage
Figure 9
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 21 of 29

### Page 24 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
(1) Components secured
to each other  (2) Clean toothing
Drive pinion
4
(2) Clean toothing
Bevel gear
Drive Pinion and Bevel Gear
Figure 10
EC135-63A-012  2007-08-08
PAGE 22 of 29  REVISION 05, 2011-09-06

### Page 25 (OCR)

• EUROCOPTER
EC135
ALERT SERVICE BULLETIN
Rotational
direction
Direction of view
Contact  Contact line  Micro pitting /  Pitting  Spalling
pattern  gray staining
Admissible - no replacement necessary  Not admissible - replacement necessary
Tooth top
Tooth root
Visual Inspection of Toothing on Pinion
Figure 11
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 23 of 29

### Page 26 (OCR)

- EUROCOPTER  EC135
ALERT SERVICE BULLETIN
Direction of
view
pattern  Contact  Contact line  Micro pitting /  gray staining  • Pitting  Spalling
Admissible - no replacement necessary  Not admissible - replacement necessary
Tooth top
Tooth heel  Tooth toe
Tooth root
Visual Inspection of Toothing on Bevel Gear
Figure 12
EC135-63A-012  2007-08-08
PAGE 24 of 29  REVISION 05, 2011-09-06

### Page 27 (OCR)

EUROCOPTER
EC135
ALERT SERVICE BULLETIN
(2) Micropitting / gray staining
(3) Normal contact pattern
(4) Factory-applied silver lacquer
Pinion
(5) Micropitting
(6) Normal contact pattern
(7) Factory-applied silver lacquer
Bevel gear
Drive Pinion and Bevel Gear
Figure 13
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 25 of 29

### Page 28 (OCR)

T EUROCOPTER
EC135
ALERT SERVICE BULLETIN
(3) Micropitting
• (1) In case of doubt, check contact line with Test
probe (2) and magnifying glass for micropitting
Pinion with micropitting and contact line
(2) Test probe
Inspection of Teeth with Test probe
Bild 14
EC135-63A-012  2007-08-08
PAGE 26 of 29  REVISION 05, 2011-09-06

### Page 29 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
(1) Install guide bolt
M6
approx. 80 mm
(2) Press back rollers of pilot
bearing
Prepare Installation of Drive Stage
Figure 15
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 27 of 29

### Page 30 (OCR)

EUROCOPTER
AN EMUS COMFANT  EC135
ALERT SERVICE BULLETIN
> Appendix to the note of malfunction / reply form sheet
Inspection report for the inspection i.a.w. Section 3, Part 4 (page 1 of 2)
Helicopter S/N:  Main transmission S/N:
Helicopter TT:  Main transmission TT: 1)  Main transmission TSO:1)
1 at the last oil change
Type:  EC135  EC635  →P1  _ P2  _ P2+  J T1  I T2  _ T2+  • CPDS  CDS
Customer:  Operator:
Contact (Name):  Phone:  Fax:  email
_ Police  • Military  EMS  VIP  • civil  Offshore  Others
• Africa  Europe  _ Far East  Middle East  South America  _ North America Central AmericaL Others
Main Transmission Part No:  4649 0_  — ×
Main Transmission TSR:
Main transmission filled with oil Mil PRF 23699
Mobil Jet II  AS500  I AS555  AS560  BP2380  — BP2389  _ Mobil256  _ Other
Main transmission filled with oil ZFNL3001 (TransmaxZ)
ASB EC135-63A-010 accomplished  Date:  Main transmission TT:
SB EC135-63-011 accomplished  Date:  Main transmission TT:
Reason for drive stage inspection:
SB EC135-63-011  ASB EC135-63A-012:
Oil change to ZFNL3001
(TransmaxZ)  According to Section 3, Part 2 stage Il
According to Section 3, Part 2 stage III
Chip Indication:
_ 2x Stage A
1x Stage B
1x Stage C
- 1x Stage D
Name in block letters  Date  Signature
Please make a copy of this page! The original of this page is to remain in the ASB!
This form is also available on the internet:
http://www.eurocoptersea.com -> Download Center
EC135-63A-012  2007-08-08
PAGE 28 of 29  REVISION 05, 2011-09-06

### Page 31 (OCR)

EUROCOPTER
AN EADS COMPANY  EC135
ALERT SERVICE BULLETIN
> Appendix to the note of malfunction / reply form sheet
Inspection report for the inspection i.a.w. Section 3, Part 4 (page 2 of 2)
Helicopter S/N:  Main transmission S/N:
Helicopter TT:
Finding result of LH drive stage:
Input Pinion:  P/N 4649 302 041  Bevel Gear:  P/N 4649 303 034
Serial No.:  Serial No.:
No findings  No findings
Micro pitting / gray  Micro pitting / gray
Pitting  Pitting
Rupture tooth flank  Rupture tooth flank
Electronic pictures attached
Finding result of RH drive stage:
Input Pinion:  P/N 4649 302 041  Bevel Gear:  P/N 4649 303 034
Serial No.:  Serial No.:
No findings  No findings
Micro pitting / gray  Micro pitting / gray
etainina  stainina
Pitting  Pitting
Rupture tooth flank  Rupture tooth flank
Electronic pictures attached
Result of Input Stage Inspection:
• Main transmission remains in service  Main transmission to be removed
Remarks:
Please make a copy of this page! The original of this page is to remain in the ASB!
2007-08-08  EC135-63A-012
REVISION 05, 2011-09-06  PAGE 29 of 29

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
