# Airbus Helicopters Service Bulletin EC135-67-040

Copy: No revision named ("Airbus Helicopters SB No_ EC135-67-040 Rev 1"), 9 pages: PDF https://openairdocs.org/files/sha256/27/b4/27b44a47d62eb989bceed49c332932923c77677b64ba852574343933dfd192c8; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67-040/file/27b44a47d62e.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0317, the docket of AD 2021-09-07. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Service Bulletin)
- Number: EC135-67-040
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67-040

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-17-02](https://openairdocs.org/ad/2019-17-02.md), effective Sep 25, 2019: No revision named

## Text (9 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0317, the docket of AD 2021-09-07. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SB EC135‐67‐040
PAGE 1 of 8Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3
635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3
SERVICE BULLETIN
ROTOR FLIGHT CONTROL ‐ Main Rotor Actuator
Inspection of the main rotor actuator (single ‐axis actuators)
Revision No. Date of issue
Revision 0 2019‐04‐25
Revision 1 2019‐05‐10
Summary:
With this Service Bulletin (SB), Airbus Helicopte rs Deutschland (AHD) provides the inspection
and replacement procedure for the tie bar of a single‐axis actuator (longitudinal, collective and
lateral) which may be necessary in the scope of EASB EC135 ‐67A‐039 or EATI
EC135/EC635‐0003‐67A.
Reason for last Revision:
Please replace Revision 0 of this SB with Revision 1.
With Revision 1 of this SB material kit SB ‐135‐67‐040‐2C3 has been added.
If Revision 0 has already been accomplished, no further measures are required due to this
revision.
Compliance:
Only personnel that have received an on the job training by Airbus Helicopters with certificate
number OJT SB EC‐135‐67‐040 or personnel from LIEBHERR are allowed to perform this SB.

### Page 2

SB EC135‐67‐040
PAGE 2o f 8 Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3,
all S/N.
b) Main rotor actuator P/N L673M20A1005
Main rotor actuator P/N L673M30A2011
Main rotor actuator P/N E673M30A2001
Main rotor actuator P/N W673M30A2001
Longitudinal single‐axis actuator P/N L673M20A1008
Longitudinal single‐axis actuator P/N L673M30A2111
Longitudinal single‐axis actuator P/N W673M30A2101
Collective single‐axis actuator P/N L673M20A1012
Collective single‐axis actuator P/N L673M30A1211
Collective single‐axis actuator P/N E673M30A1201
Collective single‐axis actuator P/N W673M30A1201
Lateral single‐axis actuator P/N L673M20A1011
Lateral single‐axis actuator P/N L673M30A2311
Lateral single‐axis actuator P/N W673M30A2301
1.A.2 Non ‐installed equipment and parts
See Section 1.A.1 b).
1.B ASSOCIATED REQUIREMENTS
This SB is linked to EASB EC135 ‐67A‐039.
1.C REASON
With this SB, AHD provides the inspection and replacement procedure for tie bar of a
single‐axis actuator (longitudinal, collective and lateral) which may be necessary in
the scope of EASB EC135 ‐67A‐039 or EATI EC135/EC635‐0003‐67A..
1.D DESCRIPTION
Inspect the single‐axis actuator(s). If necessary replace the tie bar of a single ‐axis
actuator.

### Page 3

SB EC135‐67‐040
PAGE 3 of 8Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non‐installed equipment and parts:
Only personnel that have received an on the job training by Airbus Helicopters with
certificate number OJT SB EC ‐135‐67‐040 or personnel from LIEBHERR are allowed to
perform this SB.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
Only personnel that have received an on the job training by Airbus Helicopters with
certificate number OJT SB EC ‐135‐67‐040 or personnel from LIEBHERR are allowed to
perform this SB.
Non‐installed equipment and parts:
Only personnel that have received an on the job training by Airbus Helicopters with
certificate number OJT SB EC ‐135‐67‐040 or personnel from LIEBHERR are allowed to
perform this SB.
1.F APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA No. EASA.21J.700
1.G MANPOWER
Qualification Mechanic Electrician Pilot Others
Estimated
Man‐hours approx. 4‐6h ‐ ‐ ‐
1.H WEIGHT AND BALANCE
No effect on weight and balance.
1.I POWER CONSUMPTION
Not affected.
1.J SOFTWARE UPGRADES/UPDATES
Not changed.

### Page 4

SB EC135‐67‐040
PAGE 4o f 8 Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
1.K REFERENCES
NOTE In the documentation from LIEBHERR, the tie bar P/N E0 ‐2002850 is
mentioned as “coupling rod”.
LIEBHERR Coupling Rod Inspection Procedure ‐ L‐1643‐MTA‐0002.
LIEBHERR Coupling Rod Replacement Procedure ‐ L‐1643‐MTA‐0003.
AMM EC135, AMM EC135/635.
1.L OTHER AFFECTED PUBLICATIONS
None.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not affected.

### Page 5

SB EC135‐67‐040
PAGE 5 of 8Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
2 MATERIAL INFORMATION
2.A MATERIAL: PRICE ‐ AVAILABILITY ‐ PROCUREMENT
Information on availability of required material kit SB ‐135‐67‐040‐2C1 to
SB‐135‐67‐040‐2C3 will be provided by AHD, Dept. Spares Order Administration on
request.
All material kits required will be provided free of cost by AHD only within the time
limits that apply for the compliance (Section 1.E of EASB EC135 ‐67A‐039 or EATI
EC135/EC635‐0003‐67A). Material that is ordered outside the time limits given in the
EASB EC135‐67A‐039 or EATI EC135/EC635‐0003‐67A will be charged according to
the ruling prices.
2.B LOGISTIC INFORMATION
Material kit SB‐135‐67‐040‐2C1 contains material for the inspection of the tie bar of
one single‐axis actuator. If all single ‐axis actuators of one main rotor actuator (MRA)
are inspected the material kit must be ordered three times.
Material kit SB‐135‐67‐040‐2C2 must only be ordered in addition to kit
SB‐135‐67‐040‐2C1 if the tie bar of one single ‐axis actuator must be replaced.
Material kit SB‐135‐67‐040‐2C3 contains material for the reinstallation of an
inspected tie bar and is only necessary if more than two thread pitches of the tie bar
show contact signs (See LIEBHERR instruction L ‐1643‐MTA‐0002). One material kit
contains material for one tie bar.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT
Material kits to be ordered for one helicopter or one assembly:
NOTE Material required for a removal / installation of a single ‐axis
actuator is not included within the following material kits.
EFFECTIVITY Material kit necessary for the inspection of the tie bar of one
single‐axis actuator.
Material kit SB‐135‐67‐040‐2C1.
No. Keyword Qty New P/N Old P/N Rem.
1 Locking plate 1 E4‐2069660 E4‐2069660 A
2 Nut 1 MS21046C6 MS21046C6 A
3 Washer 1 NAS1149C0663R ‐ ‐

### Page 6

SB EC135‐67‐040
PAGE 6o f 8 Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
EFFECTIVITY Material kit necessary if the tie bar of one single ‐axis actuator must
be replaced.
Material kit SB‐135‐67‐040‐2C2.
No. Keyword Qty New P/N Old P/N Rem.
1 Tie bar 1 E0‐2002850 E0‐2002850 A
2 O‐ring 4 M83461/1‐012 M83461/1‐012 A, B
3 Back‐up ring 2 MS27595‐012 MS27595‐012 A, B
4 Washer
(Laminated shim)
1 LN65045‐06 LN65045‐06 A
5 Nylstop‐nut 1 6100TCR106 6100TCR106 A
6 Split pin 1 LN94‐15018 LN94‐15018 A
EFFECTIVITY Material kit necessary if more than two thread pitches of the
inspected tie bar show contact signs (See LIEBHERR instruction
L‐1643‐MTA‐0002).
Material kit SB‐135‐67‐040‐2C3.
No. Keyword Qty New P/N Old P/N Rem.
1 Washer 1 NAS1149C0632R ‐ ‐
Remark:
A = Airbus Helicopters Deutschland does not take back parts with old part numbers.
B = The new parts are pre ‐installed on the tie bar.
2.D MATERIAL TO BE RETURNED
None.

### Page 7

SB EC135‐67‐040
PAGE 7 of 8Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
3 ACCOMPLISHMENT INSTRUCTIONS
3.A GENERAL
NOTE In the documentation from LIEBHERR, the tie bar P/N E0 ‐2002850 is
mentioned as “coupling rod”.
NOTE Operators or service stations are only allowed to accomplish the
inspection or replacement of the single ‐axis actuator tie bar after
having been trained and authorized by Airbus Helicopters. The
inspection instruction L‐1643‐MTA‐0002 and the replacement
instruction L‐1643‐MTA‐0003 from LIEBHERR will be handed over
after the training has been passed. Revisions of the inspection
instruction will directly send to the authorized operators / service
stations.
3.B WORK STEPS
3.B.1 Preliminary steps
If not already removed from the helicopter, remove the MRA (AMM, 67 ‐31‐00, 4‐1).
3.B.2 Inspection of the single ‐axis actuator tie bar
NOTE Following the procedure for one single ‐axis actuator is described.
On a complete main rotor actuator the inspection may be
performed for each single‐axis actuator (longitudinal, collective and
lateral).
Inspect the single‐axis actuator tie bar in accordance with LIEBHERR instruction
L‐1643‐MTA‐0002.
‐ If the inspected tie bar shows corrosion as defined in LIEBHERR instruction
L‐1643‐MTA‐0002 proceed with Section 3.B.3.
‐ If the inspected tie bar shows no corrosion proceed with Section 3.C.
3.B.3 Replacement of the single ‐axis actuator tie bar
Replace the single‐axis actuator tie bar in accordance with LIEBHERR instruction
L‐1643‐MTA‐0003.
3.B.4 Final steps
When reinstalling the MRA on the helicopter (AMM 67 ‐31‐00, 4‐2):
NOTE The Functional Check according to the AMM 67 ‐31‐00, 5‐1, the
adjustment of the boosted section of the main rotor controls AMM
67‐00‐00, 5‐1 and the adjustment of the non ‐boosted section of the
main rotor controls AMM 67 ‐00‐00, 5‐2 is not required.

### Page 8

SB EC135‐67‐040
PAGE 8o f 8 Revision 1, 2019‐05‐10
This document is available on the internet: www.airbushelicopters.com/techpub/
a. Check the ease of movement of the MRA (AMM67 ‐31‐00, 5‐2).
b. Check main rotor controls for freedom of movement. To do so, move the
cyclic stick and the collective lever th rough their full control range. Moving
parts must not touch and must have sufficient clearance between them.
3.C COMPLIANCE CONFIRMATION
Compliance with this document:
1. Fill the inspection protocol (see appendix) and add it to the log card of the
affected single‐axis actuator.
2. Confirm accomplishment of this SB (Either the inspection or the replacement) in
the log card of the MRA and/or in the log cards of the single ‐axis actuators
(longitudinal, collective and lateral).
3.D OPERATING AND MAINTENANCE INSTRUCTIONS
None.
4 APPENDIX
Inspection protocol.

### Page 9

APPENDIX
SB EC135‐67‐040
PAGE 1 of 12019- -05- -10
INSPECTION PROTOCOL
Inspection of the tie bar:
YES
Inspection on the affected tie bar performed?
Orientation of ring segments correct?
Correct tightening torque applied?
Old and new check dimension within limit?
Replacement of the tie bar:
Not applicable (NA) if no corrosion was found during inspection.
YES / NA
Replacement of the tie bar performed?
Orientation of ring segments correct?
Correct tightening torque applied?
Old and new check dimension within limit?
MECHANIC INSPECTOR
NAME: SIGNATURE: NAME: SIGNATURE: STAMP:

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
