# Eurocopter Alert Service Bulletin EC135-67A-015

Copy: No revision named ("U.S. DOT/FAA - ASB-EC135-EC635-67-015-Rev0-EN"), 8 pages: PDF https://openairdocs.org/files/sha256/ac/38/ac38b2185f5d344f082cd719cd6bf05d7fd307e8b3b7dfd12df9f2a9aa1fe11f; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a015/file/ac38b2185f5d.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-1305, the docket of AD 2013-11-15. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-67A-015
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a015

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-11-15](https://openairdocs.org/ad/2013-11-15.md), effective Jul 26, 2013: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a015/proposed.md).

## Text (8 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-1305, the docket of AD 2013-11-15. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 1 of 8
2008-04-14
 
Rotor Flight Control  –  Cyclic Controls  –  Modification of
Cyclic-Stick-Locking Device/-Centering Device
1. Planning Information
A. Effectivity
(1) Helicopters affected: EC135/EC635, all models, S/N 0005 up to and including
S/N 0699, excluding S/N 0076, S/N 0093, S/N 0098, 
S/N 0099, S/N 0102, S/N 0104, S/N 0106, S/N 0108, 
S/N 0110, S/N 0111, S/N 0113, S/N 0114, S/N 0116, 
S/N 0117, S/N 0119.
(2) Components affected: Cyclic Stick Locking Device L670M1045101 or
L670M1045102 or
L670M1045104 or
L670M1045105 or
L670M1045106 or
L670M1045107
Pin L311M1038205 or
L311M1099205
(3) Spare Parts affected: See 1.A.(2).
B. Concurrent Requirements
Immediately after accomplishment of this Alert Service Bulletin the pilots must be informed
of its content and their attention must be drawn to the following:
NOTE Before starting the engines, the cyclic stick (1, Figure 2) must be moved
to its neutral position.
By folding up cantilever (5) to pin (3) it is possible to move the cyclic
stick (1) into its neutral position and to center it. A locking of the cyclic
stick (1) is no longer possible.
C. Reason
There have been several cases where lift-off of a helicopter was executed with a locked
cyclic stick. A locked cyclic stick may lead to a loss of controllability of the helicopter.
In order to prevent an inadvertent lift-off of the helicopter with a locked cyclic stick, a
modification of the cyclic stick cantilever is accomplished with this Alert Service Bulletin.
After accomplishment of this modification the cyclic stick can only be centered in its neutral
position. A locking of the cyclic stick is no longer possible.
D. Description
Remove slide and spring from cyclic stick cantilever.

### Page 2

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 2 of 8  
2008-04-14
E. Compliance
This Alert Service Bulletin must be accomplished by 31.07.2008 at the latest.
F. Approval
The information or instructions contained in this document refer to change no. 1311. The
technical content of this document is approved under the authority of DOA No.
EASA.21J.034.
G. Manpower
Approx. 2 man–hours.
H. Weight and Balance
Not applicable.
I. Electrical Load Data
Not applicable.
J. Software Accomplishment Summary
Not applicable.
K. References
Not applicable.
L. Other Publications affected
The changes to AMM EC135, AMM EC135/635 T1/T2 (CPDS), IPC EC135, IPC EC635 and
FLM which are required as a result of this Alert Service Bulletin will be incorporated with one
of the next revisions.
M. Interchangeability of Parts
Not applicable.

### Page 3

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 3 of 8
2008-04-14
 
2. Material Information
A. Material – Price and Availability
Information on cost and availability of required retrofit kit SB-135-67A-015-2C will be
provided by ECD, Dept. Spares Order Administration on request.
B. Support Information
Not applicable.
C. Material Necessary for Each Helicopter
Retrofit kit SB-135-67A-015-2C.
No. New P/N Keyword Old P/N Qty Disposition
1 L311M1038207 Rubber washer − 1 A
2 LN9179/C02623208E Countersunk rivet − 1 A
3 LN65049/C026232M Washer − 1 A
4 − Slide L670M1045208 1 B
5 − Spring L670M1045220 1 B
6 − Washer L670M1045217 2 B
7 − Washer L670M1045214 2 B
8 − Washer L670M1045211 2 B
9 − Blind rivet MBBN3013M3207 1 B
10 − Blind rivet MBBN3013M3206 1 B
11 − Dry cleaning solvent
(CM 202)
− a.n.* C
12 − Lacquer
(CM 4012)
− a.n.* C
13 − Hardener
(CM 4013)
− a.n.* C
*a.n. = as needed
Disposition:
A = New, included in kit.
B = Part with old P/N is discarded.
Discarded parts are not taken back by ECD.
C = Consumable material, to be ordered as required from the Interturbine company.
CM item number i.a.w. list of consumable materials in the AMM.
D. Material Necessary for Each Spare
See Section 2.C.

### Page 4

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 4 of 8  
2008-04-14
E. Reidentified Parts
Not applicable.
F. Special Tooling
Not applicable.
3. Accomplishment Instructions
A. Preliminary work:
(1) Remove cantilever (1, Figure 4) i.a.w. AMM, 67-11-00, 4-2.
B. Modification of cantilever (1, Figure 1):
(1) Using drill bit dia. 3.2 mm, drill out blind rivets (3, 4, Figure 1) from cantilever (1).
Completely remove rivet remains.
(2) Remove slide (5, Figure 1), spring (6) and washers (7, 8, 9) and discard.
(3) Rivet pivot plate (2, Figure 1) to cantilever (1) using countersunk rivet (3) and
washer (10).
(4) Push rubber washer (6) over pin (3) i.a.w. Figure 2.
C. Identification of the cantilever (1, Figure 3):
(1) Remove all dirt and grease from the surface to be marked in the area of the part number
on the inside of the cantilever (1, Figure 3) using dry cleaning solvent (CM 202). Leave
the cleaned area to air.
(2) Write the number of this Alert Service Bulletin onto the area near the part number on
the inside of the cantilever (1, Figure 3) using a waterproof pen.
(3) Protect the marking by lacquer (CM 4012, CM 4013).
D. Conclusive works:
(1) Install cantilever (1, Figure 4) i.a.w. AMM, 67-11-00, 4-2.
(2) Fold the cantilever (1, Figure 4) towards the cyclic stick (2) and lock it to the cyclic stick
by means of the rotary fastener (3).
E. Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record of
the helicopter.
4. Appendix
Not applicable.

### Page 5

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 5 of 8
2008-04-14
 
Modification of Cantilever
Figure 1
1 Cantilever
2 Pivot plate
3 Blind rivet MBBN3013M3207
Countersunk rivet LN9179-3208E
4 Blindrivet
5 Slide
6 Spring
7 Washer
8 Washer
9 Washer
10 Washer LN65049-32M
Before modification.
After modification.
Before modification.
After modification.
1
2 34
5
678987
2
1
3
10
Section  A–A
Section  B–B
A
A
B
B

### Page 6

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 6 of 8  
2008-04-14
Installation of Rubber Washer to Pin
Figure 2
A
1 Cyclic stick
2 Bracket
3 Pin
4 Instrument panel
5 Cantilever
6 Rubber washer L311M1038207
Detail A
2
5
1
3
4
3
6
6

### Page 7

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 7 of 8
2008-04-14
 
Identification of Cantilever
Figure 3
1 Cantilever
L670M1045107
ASB EC135-67A-015
Possible P/N shown.
Identification on the inside of the cantilever.
Mark with the number of this Alert Service Bulletin.
1

### Page 8

ALERT SERVICE BULLETIN
EC135
EC135-67A-015
PAGE 8 of 8  
2008-04-14
Cantilever Locking
Figure 4
1 Cantilever
2 Cyclic stick
3 Rotary fastener
1
2
3

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
